Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
SmallRig Leather Camera Neck Strap 3485 is designed to help carry your camera over your shoulder or around your neck while relieving the stress on your shoulder.
Délai habituel entre 4 et 5 semaines
For insertion into 4583 compound negative carrier of SYSTEM-V enlargers and for 4493 compound negative carrier. Pairs of masks. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Small compact slide viewer for framed slides 5 x 5 cm (2 x 2 in.). With hinged prop. Required batteries: 2 x 1,5 V AA-size (supplied without batteries). With 2-fold magnifying lens
To enlarge or photograph a black border around the picture. With guide ridges for film strips and neg number read-out window.
Eyepiece Extender EP-EX15
Délai habituel 2 semaines
Rubber Frame Eb for EOS 20D - 10D - D60 - D30 - 10S - Elan & Some Earlier Rebel Series Cameras with E Diopters
Délai habituel 2 semaines
Ef Rubber Frame for Dioptric Lens
Délai habituel 2 semaines
Eyecup EB
Délai habituel 2 semaines
Eyecup EF
Délai habituel 2 semaines
ER-100B Neck Strap for EOS-R
Délai habituel 2 semaines
SmallRig Universal Vintage Wrist Strap 3926 is designed to prevent accidental camera drops.
Délai habituel entre 4 et 5 semaines
Format masks 24 x 36 mm (35 mm) (a + b). With guide ridges for film strips and neg number read-out window
Camera O-Ring Kit
O-Ring Set for Nikonos RS - Includes grease
Grey card for PF-3
Countdown timer and stopwatch with four-digit LCD display. Up to max. 99 minutes 59 seconds, counts in one-second increments.
The Falcon Eyes CFA-30K Speedlite Colour Filter Kit is a gel colour kit ideal for the creation of various colour temperatures while photographing subjects.
Délai habituel entre 2 et 4 semaines
Falcon Eyes Barndoor SGA-BD4
Délai habituel entre 2 et 4 semaines
For insertion into 4583 compound negative carrier of SYSTEM-V enlargers and for 4493 compound negative carrier. Pairs of masks. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
Falcon Eyes Hotshoe Adapter HS-25Sa for Sony Camera
Délai habituel entre 2 et 4 semaines
Sync Cable
Délai habituel entre 2 et 6 semaines.
Acid-resistant and washable, made of light pleasant-to-wear material, with seamed edges. Matt black with pocket
Panorama format masks 24 x 66 mm, e.g. for Hasselblad X-pan, Noblex 135 and Mamiya 7 with 35 mm panorama insert
The FDA-EP20 Eyepiece Cup from Sony is made for the a6700 mirrorless camera. This cup helps protect your viewfinder from dirt, dust, and other debris while also helping to block unwanted light.
With twin levels (yellow-green liquid) and mounting feet for landscape and portrait position. Transparent housing. Attaches to the camera's accessory shoe
Made of Chemical-resistant polypropylene. Temperature-resistante up to 95 °C (203 °F). With pouring lip and wide base for steady stand. Graduated scale
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-P1, replaces Panasonic DMW-RSL1, for Panasonic and Leica cameras with 2.5 mm jack plug connector
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-S2, replaces Sony RM-SPR1, for Sony (Multi-Interface)
Protection Kit for Red Komodo
Délai de livraison de 4 à 6 semaines
FlashTrig 16R Additional Receiver for Radio Trigger Set # 7016
Cover Kit X-T4
Comfortably carry your DSLR or mirrorless camera and lens with this adjustable black SmallRig Camera Wrist Strap.
Délai habituel entre 4 et 5 semaines
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-F3, replaces Fujifilm RR-90, for Fujifilm
One-piece glassless snap-down slide mount, 5 x 5 cm (2 x 2 in.), as defined in DIN 108, for automatic mounting with Kaiser C.A.M./CS slide cutters and mounters, Reflecta Servicemaster CS 2 and Braun Paximat Automount
For films size 135 (35 mm), 126, 127, 120 or 220. Fits 4296 and 4297 developing tanks
For insertion into the 4583 compound negative carrier of SYSTEM-V enlargers and for 4493 compound negative carrier
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-N3, replaces Nikon MCDC2, for Nikon cameras from D90 up to D7500
Magnifier for all-round use with color corrected aspherical lens and eyesight correction. Transparent base
Negative Filing Sheets for 35 mm film, Glassine, 25 sheets. For the orderly and protected storage and archiving of negative strips and single negatives. Including cover sheet with index. Margin punched with Euro-holes
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-C2, replaces Canon RS-60E3, Fujifilm RR-100, Olympus RM-CB2 and Pentax CS-205, for Canon, Pentax, Samsung and Sigma cameras with 2.5 mm jack plug connector
With four-fold soft rubber lips that are gentle on the film
The cable features a straight 2.5mm LANC connector on one end to connect to your camera, and a right-angle USB-C connector on the other end to connect to the top handle.
Délai habituel entre 4 et 5 semaines
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-C1, replaces Canon RS-80N3, for Canon cameras with N3 socket
The Falcon Eyes Universal D5 Diffuser Cup + Colour Filters enables you to manipulate the light emitted from your speedlite.
Délai habituel entre 2 et 4 semaines
FDA-EP19: Eyepiece cap Alpha 7 S Mark III
Eyepiece cup with lock mechanism for ILCE9
Soft, slide-type eyepiece cup for 6500
Sony AGR-2B Camera Grip DSC-RX100M3
Made of chemical-resistant plastic. Temperature-resistant in excess of 80 °C (176 °F). With pouring lip and scale
For insertion into the 4583 compound negative carrier of SYSTEM-V enlargers and for 4493 compound negative carrier. Dimensions: approx. 100 x 72.5 mm (3.9 x 2.9 in.)
ER-SC1 Shoe Cover
Délai habituel 2 semaines
With angled stem and hook for hanging it on trays edge. Alcohol-filled bulb. Centigrade and Fahrenheit scales: 0 ... 50° C/32 ... 120° F. With marking at 18°C/64°F. Length: 85 mm + 40 mm of angled stem (3.3 + 1.6 in.), ? 10 mm (.4 in.)
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Compact ergonomically designed remote release. Ensures vibration-free shooting in macro photography, for long exposures or when using large telephoto lenses. MonoCR-N1, replaces Nikon MC-30, for Nikon and Fujifilm cameras with 10 pin socket
The Falcon Eyes CA-SGU Universal Speedlite Adapter is a universal speedlite adapter compatible with the Falcon Eyes SGA-K9 Set and all SGA series accessories.
Délai habituel entre 2 et 4 semaines
The Falcon Eyes L-8002 Flash Bounce is compatible with the Canon 430EX speedlite.
Délai habituel entre 2 et 4 semaines
For orderly and safe storing and filing of framed slides. Plasticizer-free PP film without chemical effect on the slides. Upper and lower side transparent. Margin punched with Euro-holes
For opening 35-mm film cartridges
For six 35mm negatives or unmounted slides. For use with Slide Duplicator 6506
Circular bubble, self-adhesive. For permanent attachment to cameras, tripods etc. Features three holes for screw attachment. Aluminum housing, black anodized
Print tongs made of chemical-resistant plastic, self-opening. Molded tray-edge recess. Can also be used as film or print clamp. Length: 180 mm (7.1 in.) Set of two
For photochemicals. Black. The accordion-like walls can be pressed together, setting excess air free. This reduces the danger of oxidation and allows for longer storage of chemicals. With screw-on cap
Falcon Eyes Hotshoe Adapter SP-03HS
Délai habituel entre 2 et 4 semaines
Stylish loupe with LED illumination. Ergonomically shaped handle, lens has frosted and rounded off edge. Batteries: 3 x 1.5 V, LR1130 (included)
Alcohol-filled. With centigrade and Fahren- heit scales: 0 to 50° C/32 to 120° F. With marker at 18° C/64° F. Length: 120 mm (5.1 in.), ? 11 mm (.4 in.)
Made of Chemical-resistant polypropylene. Temperature-resistante up to 95 °C (203 °F). With pouring lip and wide base for steady stand. Graduated scale
. The strap adjusts to the size of your hand, and connects to a cage or handgrip with a strap slot width of 12mm or wider.
Délai habituel entre 4 et 5 semaines
Screen Protector for Sony a7C II, a7CR, a6700, ZV-E1 & a7 IV
Délai habituel entre 4 et 5 semaines
This black Bolt Pack for Capture Camera Clip from Peak Design is a set of four replacement clamping bolts for the Capture v3 and v2 harnesses. Included in the package is a pair of thumbscrews, supporting straps as thick as 0.63", and a pair of hex-head fasteners for thicker straps up to 0.87".
This silver Bolt Pack for Capture Camera Clip from Peak Design is a set of four replacement clamping bolts for the Capture v3 and v2 harnesses. Included in the package is a pair of thumbscrews, supporting straps as thick as 0.63", and a pair of hex-head fasteners for thicker straps up to 0.87".
For 35 mm film. For self-loading with bulk film material. Plastic type, 5 pcs.
Replacement protective cover for Profoto Air RemoteTTL-Sony, Connect Sony and A1X / A10 Sony
For hanging up wet films. 3-hole clip mechanism. Plastic with stainless steel spring. 1 clip with and 1 without weight
Falcon Eyes Flash Bounce L-8006 for Canon 380EX
Délai habituel entre 2 et 4 semaines
Falcon Eyes Flash Bounce L-8007 for Nikon SB800
Délai habituel entre 2 et 4 semaines
Falcon Eyes Flash Bounce 9002N for Nikon SB600
Délai habituel entre 2 et 4 semaines
Stainless steel, insensitive to photochemicals. With spiral spring and catch for hanging on side of tray. With protective caps especially designed for working with plastic-coated papers. Length: 150 mm (6 in.) 2 pieces
This black Peak Design Anchor Connector 4-Pack allows you to attach additional cameras, binoculars, rangefinders, and other smaller devices and gear onto any of their camera straps to increase your carrying capacity.
Made of polyathylene, unbreakable and acid-proof. With screw cap and blank label
This 4-pack of Peak Design C-Clips are designed to be used as extras for your Peak Design Camera Cube.
Diopter Correction Lens
Stylish loupe with LED illumination. Ergonomically shaped handle, lens has frosted and rounded off edge. Batteries: 3 x 1.5 V, LR1130 (included)
Carrying strap for compacts with two strap connectors (e.g.Panasonic TZ) and for mirrorless interchangeable lens cameras
Magnifier for allround use. Transparent base. Magnification: 8x
Alcohol-filled. Unbreakable plastic stem. With centigrade scales: -10 to 50° C. Length: 130 mm (5.1 in.); ? 12 mm (.4 in.)
For cameras with two flat or round eyelets. Shoulder pad made from flexible high-grade Neoprene, edges covered with fabric
For photochemicals. Black. The accordion-like walls can be pressed together, setting excess air free. This reduces the danger of oxidation and allows for longer storage of chemicals. With screw-on cap
Eyepiece cup for interchangeable-lens cameras NEX/Alpha
Made of Chemical-resistant polypropylene. Temperature-resistante up to 95 °C (203 °F). With pouring lip and wide base for steady stand. Graduated scale
BS-3 Accessory Shoe Cover
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Flat slide-out magnifier with LED light. The LED lights up when loupe slides out
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
For hanging up wet films. 2-hole clip mechanism. Stainless steel model. 1 clip with and 1 without weight
Falcon Eyes Hotshoe Adapter HS-20M + Tripod Connection
Délai habituel entre 2 et 4 semaines
Falcon Eyes Hotshoe HS-15 + Hotshoe + Tripod Connection
Délai habituel entre 2 et 4 semaines
ER-SC2 Shoe Cover
Délai habituel 2 semaines
For cameras with single strap connector and Action Cams. Also suitable for light-weight electronical devices like USB stick, flashlight. Soft elastic textile fabric
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Carrying strap for digital compacts with single strap connector. Shoulder pad made of high-grad soft Neoprene, edges covered with fabric. High carrying comfort
Replacement lamp for Kaiser Dia-Viewer 2006, 2015, slide cutter 2115 and darkroom lamp 4018. This product is designed to illuminate images and not for home lighting.
The Nikon BS-1 fits into the hot shoe of all Nikon mirrorless and SLR cameras and helps to keep out dust and moisture from the shoe when not in use.
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
For extracting 35 mm film leader from cartridges into which the film has been wound. Plastic casing with one fixed and one sliding tongue. Simple use
Made of shock-resistant plastic. Acid- proof. Heat resistant up to 80° C (176° F). Grooved bottom enhances removal of paper and ensures best possible flow for chemicals and stability. With pouring lip. 4171 - 73 with recess for tray thermometer
For framed slides, 5 x 5 cm (2 x 2 in.), and film strips. 2-fold magnification. Lens diameter 18 mm (.7 in.)
Made of chemical-resistant plastic; self- opening. Molded tray edge recess. One pair of different-coloured print tongs. Length: 160 mm (6.3 in.)
Made of Chemical-resistant polypropylene. Temperature-resistante up to 95 °C (203 °F). With pouring lip and wide base for steady stand. Graduated scale
Made of chemical-resistant plastic. Temperature-resistant in excess of 80 °C (176 °F). With pouring lip and scale
Replacement lamp 15 W E 14
Made of polyathylene, unbreakable and acid-proof. With screw cap and blank label
Made of polyathylene, unbreakable and acid-proof. With screw cap and blank label
Made of Chemical-resistant polypropylene. Temperature-resistante up to 95 °C (203 °F). With pouring lip and wide base for steady stand. Graduated scale
Conversion Plug X-T4
For handling photochemicals. Made of nonbreakable chemical-resistant polyethylene. Ribbed barrel to prevent airlocks and facilitate fast pouring.
Dedicated to camera bodies featuring a Canon RF mount, this R-F-5 Camera Cover is a body cap designed to protect the interior of your camera when not in use.
Délai habituel 2 semaines