Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
BATTERY DRIVE TOOL KIT for MOTORISED POLE
Délai habituel entre 2 et 3 mois
includes: 1 Wurth TRANPORT CASE, 1 Wurth BATTERY POWER TOOL including: ADJUSTABLE TORQUE LIMITER, SELECTABLE MAXIMUM SPEED, 1 BATTERY fitted as STANDARD, 1 SPARE BATTERY, 1 BATTERY CHARGER, 1 BIT with HOOK
Délai habituel entre 2 et 3 mois
Mini SPIDER P.O. 4M B.S., Mains (Powercon 20A) & DMX (XLR5p) circuits. For hanging heights up to 6 m
Délai habituel entre 2 et 3 mois
Mini SPIDER P.O. 2M B.S., Mains (Powercon 20A) & DMX (XLR5p) circuits
Délai habituel entre 2 et 3 mois
Part of the Sky Track Rail System. Pantographs are designed to allow light fixtures to be positioned at any height. This manual Pantograph comes complete with a 5/8" top male spigot and female bottom receptor. The load is supported by a 2mm steel cable. It extends from a closed length of 15"(38cm) to a maximum extension of 12.5 feet (380cm)
Délai habituel entre 3 et 5 semaines
Professional Rail System
Délai habituel entre 3 et 6 semaines
The pantograph is made of aluminum and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 5/8" (16 mm), male on the top and female on the bottom. The load is supported by a steel cable of 0.08 inch. diameter (safety factor 12). It extends from a closed length of 10.6" (27cm) to a maximum extension of 6.5 feet...
Délai habituel entre 3 et 5 semaines
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. It sustains loads from 1.5kg up to 12kg max
Délai habituel entre 3 et 5 semaines
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. It sustains loads from 1.5kg up to 12kg max
Délai habituel entre 3 et 5 semaines
D RAIL Extruded Aluminum linear rail section of 6 meter
Délai habituel entre 2 et 3 mois
Anodized rail 5m long
Délai habituel entre 3 et 5 semaines
D RAIL Extruded Aluminum linear rail section of 5 meter
Délai habituel entre 2 et 3 mois
Anodized rail 4m long
Délai habituel entre 3 et 5 semaines
D RAIL Extruded Aluminum linear rail section of 4 meter
Délai habituel entre 2 et 3 mois
Falcon Eyes Extension Set 3320C for B-3030C from 3x3 m to 4x6 m
Délai habituel entre 2 et 4 semaines
The Falcon Eyes 3310C Extension Set is suitable for the Falcon Eyes B-3030C Ceiling Rail System
Délai habituel entre 2 et 4 semaines
D RAIL DOUBLE SWIVELLING TROLLEY for Tracking and swivelling facility of "D" RAIL or IPE 80 sections under 2 upper "D" RAIL or IPE 80 sections
Délai habituel entre 2 et 3 mois
D RAIL DOUBLE SWIVELLING TROLLEY for Tracking and swivelling facility of "D" RAIL or IPE 80 sections under 2 upper "D" RAIL or IPE 80 sections
Délai habituel entre 2 et 3 mois
D RAIL Extruded Aluminum linear rail section of 3 meter
Délai habituel entre 2 et 3 mois
D RAIL TROLLEY with BOTTOM SWIVELLING FLANGE for Tracking and swivelling facility of "D" RAIL or IPE 80 sections under 2 upper "D" RAIL or IPE 80 sections
Délai habituel entre 2 et 3 mois
D RAIL DISMOUNTABLE TROLLEY
Délai habituel entre 2 et 3 mois
"D" RAIL TOP DOUBLE BRACKET PAN SWIVELLING for D Rail mounting on upper D Rail with adjustable horizontal angle of the bottom flange
Délai habituel entre 2 et 3 mois
D RAIL Extruded Aluminum linear rail section of 2 meter
Délai habituel entre 2 et 3 mois
D RAIL TROLLEY
Délai habituel entre 2 et 3 mois
The Falcon Eyes 3360C Pantograph can be run along a ceiling rail system via the supplied track runner.
Délai habituel entre 2 et 4 semaines
"D" RAIL TOP BRACKET for PERPENDICULAR RAILS for D Rail mounting to upper D Rail with 90° perpendicular angle on the horizontal plane.
Délai habituel entre 2 et 3 mois
D Rail Top Bracket for Concrete Ceilings. It includes models. 8205.100+8205.200+8206.100
Délai habituel entre 2 et 3 mois
Attachment Flange to connect D RAIL to a Pipe Grid. The Flange allows for heigth adjustment and an be utilized for PIPES running parallel or perpendicular to the D RAIL desired position.
Délai habituel entre 2 et 3 mois
D RAIL Extruded Aluminum linear rail section of 1 meter
Délai habituel entre 2 et 3 mois
"D" RAIL Fast Action END STOP. It includes: Spring Loaded Rocker Mechanism with Bumpers; Central Hinge Assembly with Spacers, Bolt and nuts
Délai habituel entre 2 et 3 mois
"D" RAIL TOP BRACKET with 13 mm, diameter Hole for D Rail mounting on upper 13 mm, diameter Hole with adjustable horizontal angle of the bottom flange. It can be fixed on HILTI, UNISTUCT, THREADED ROADS and so on.
Délai habituel entre 2 et 3 mois
Pantograph Stick
Délai habituel entre 3 et 5 semaines
B.S./DIN SOCKET (29 mm. RECEIVER) with locking knob, including: Safety PIN with latch; TOP fixed flange with fixing clamps for D Rail
Délai habituel entre 2 et 3 mois
"D" RAIL TROLLEY for CABLE HOLDING (Festoon system). Including: TOP trolley; BOTTOM SADDLE for Cable Holding; Compatible with IPE 80 standard "I" beam
Délai habituel entre 2 et 3 mois
With the Falcon Eyes spare parts set for Pantograph 3360C you get an extra or replacement spare parts set for your Falcon Eyes or Linkstar Pantograph. It is wise to have a spare parts set in stock in case you can't find a part when you need it.
Délai habituel entre 2 et 4 semaines
Sockect adapter to connect a CE16A Plug into a Powercon Panel Socket
Délai habituel entre 2 et 3 mois
The Falcon Eyes Telescopic Arm 3365C is suitable for the B-3030C Ceiling Rail system.
Délai habituel entre 2 et 4 semaines
Double Bracket for Rail Crossing
Délai habituel entre 3 et 5 semaines
D RAIL TOP BRACKET, for direct Ceiling fixing. It does not include nuts, bolts and washers.
Délai habituel entre 2 et 3 mois
Plug adapter to connect a Powercon Plug into a CE16A socket.
Délai habituel entre 2 et 3 mois
Bracket for ceiling attachment of the rail. It is advisable to pre-assemble these brackets onto the rails at ground level to ensure correct alignment before screwing to a ceiling
Délai habituel entre 3 et 5 semaines
D RAIL JUNCTION "6 HOLES"
Délai habituel entre 2 et 3 mois
Spigot
Délai habituel entre 3 et 5 semaines
These are inserted from the end of the rail. They do not need wheels as they they slide along the rail and are suitable for normal cables
Délai habituel entre 3 et 5 semaines
Falcon Eyes Double Rail Carriage 3340C for B-3030C
Délai habituel entre 2 et 4 semaines
KIT OF 2 CLAMPS TO FIX the "D" Rail to the relevant flange choosen in the "D" Rail system. It includes the necessary nuts, bolts and washers
Délai habituel entre 2 et 3 mois
Safety Cable
Délai habituel entre 3 et 5 semaines
ATT Bracket 4 Frtiction Pant
Délai habituel entre 3 et 5 semaines
KIT OF 2 CONCRETE INSERTS to fix Bracket to a Concrete Ceiling for 50 kg. CAPACITY. It includes the necessary nuts, bolts and washers
Délai habituel entre 2 et 3 mois
The Falcon Eyes 3330C Track Mounting Plate is compatible with the Falcon Eyes B-3030C Ceiling Rail System and is used to fix 2 beams to the ceiling.
Délai habituel entre 2 et 4 semaines
The Falcon Eyes 3314C Track Runner is compatible with the Falcon Eyes B-3030C Ceiling Rail System.
Délai habituel entre 2 et 4 semaines
Cable Clip for Pantog. Set of 10
Délai habituel entre 3 et 5 semaines
D RAIL END STOP. It includes the necessary nuts, bolts and washers
Délai habituel entre 2 et 3 mois
The Falcon Eyes 3370C Cable Runner is compatible with the Falcon Eyes B-3030C Ceiling Rail System.
Délai habituel entre 2 et 4 semaines
The Falcon Eyes 3390C Safety Steel Wire is essential for use in combination with the Falcon Eyes 3360C Pantograph and a studio flash unit.
Délai habituel entre 2 et 4 semaines
Falcon Eyes Rail Stopper 3350C 4 Pcs. for B-3030C
Délai habituel entre 2 et 4 semaines