Au service des professionnels et passionnés
- Eclairage led
- Flashs cobras, studios & stroboscopiques
- Modificateurs de lumière
- Lumière hmi
- Tubes Fluorescents
- Eclairage Tungsten
- Eclairage scénique
- Trépieds lumière
- Support divers / Grip
- Fonds studio
- Cellule
- Alimentation d'éclairage
- Console DMX
- Panneaux de signalisation lumineux
- Système rail studio
- Sacs et valises de transport
- Cable éclairage
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Support divers / Grip
Support divers / Grip sur Visuals, votre boutique spécialisée en matériel d'éclairage en Suisse
-
-
Doughty G1500 - Lightweight Pantograph 3 Spring X 2.0m(C/w 16mm Spigot and Receiver) 3 - 15kg Weight Range
Lightweight Pantograph 3 Spring X 2.0m(C/w 16mm Spigot and Receiver) 3 - 15kg Weight Range
557,25 CHF HT
602,39 CHF TTC en stock1 pièce (s) en stock
-
Manfrotto 1314B - Background Support System
Background Support System (9' Width)
361,00 CHF HT
390,24 CHF TTC en stock5 pièce (s) en stock
-
Matthews B387490 - Light / Heavy Triple Riser Kit Stand - Black
Light / Heavy Triple Riser Kit Stand - Black
248,88 CHF HT
269,04 CHF TTC en stock9 pièce (s) en stock
-
Doughty T84249 - 2.8m Telescopic Operators Pole (2 Section)
2.8m Telescopic Operators Pole (2 Section)
237,00 CHF HT
256,20 CHF TTC en stock1 pièce (s) en stock
-
Doughty T84053 - Studio Rail 60 Curve Radius 90 cm, Black (2.49 Kg)
Studio Rail 60 Curve Radius 90 cm, Black (2.49 Kg)
226,50 CHF HT
244,85 CHF TTC en stock1 pièce (s) en stock
-
Manfrotto 143 - Magic Arm Kit
The Manfrotto 143 Magic Arm Kit is designed to hold a light fixture or camera in place in a variety of situations. The heart of the kit is the Magic Arm - an elbow arm with sure locking lever control at the pivot. The removable camera mount pans and locks, and has a standard 1/4"-20 thread mount.
213,00 CHF HT
230,25 CHF TTC en stock6 pièce (s) en stock
-
Matthews B429722 - Light Weight Telescoping Hanger With Pipe Clamp
2 to 4 Ft. (610-1220mm) Light Weight Telescoping Hanger With Pipe Clamp
210,00 CHF HT
227,01 CHF TTC en stock4 pièce (s) en stock
-
Matthews 540001 - Hollywood Superflex Arm Snap-in
Hollywood Superflex Arm Snap-in
184,80 CHF HT
199,77 CHF TTC en stock1 pièce (s) en stock
-
Matthews B429726 - Light Weight Telescoping Hanger with Pipe Clamp
1.5 to 3ft (457-914mm) Light Weight Telescoping Hanger with Pipe Clamp
184,80 CHF HT
199,77 CHF TTC en stock4 pièce (s) en stock
-
Matthews B429720 - Light Weight Telescoping Hanger With Pipe Clamp
1 to 2 Ft. (305-610mm) Light Weight Telescoping Hanger With Pipe Clamp
177,60 CHF HT
191,99 CHF TTC en stock2 pièce (s) en stock
-
Matthews 427000 - Pump Cup
Pump Cup - 6 inches Suction Cup with 5/8 inches Pin
170,40 CHF HT
184,20 CHF TTC en stock3 pièce (s) en stock
-
Manfrotto 244 - Variable Friction Magic Arm with Camera Bracket
The Manfrotto 244 Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera.
166,00 CHF HT
179,45 CHF TTC en stock2 pièce (s) en stock
-
Manfrotto C337 - Quick Action Junior Clamp 1-1/8" Socket
Quick Action Junior Clamp 1-1/8" Socket
159,00 CHF HT
171,88 CHF TTC en stock1 pièce (s) en stock
-
Doughty T84205 - 6 Wheel Car 28mm Receiver (Brake)
6 Wheel Car 28mm Receiver (Brake)
158,35 CHF HT
171,18 CHF TTC en stock7 pièce (s) en stock
-
Doughty T84005 - Studio Rail 3.0m (Silver)
Studio Rail 3.0m (Silver)
153,05 CHF HT
165,45 CHF TTC en stock2 pièce (s) en stock
-
Manfrotto MA044 - Triple Hook with BP Clamp for Background Paper
Triple hook with BP clamp for background paper
122,00 CHF HT
131,88 CHF TTC en stock1 pièce (s) en stock
-
SmallRig 4862 - Super Clamp with Magic Arm Kit
Mount your camera or light onto a stand or desktop with the Super Clamp with Magic Arm Kit from SmallRig. The kit includes a super clamp that fits around 0.4 to 2.3" diameter poles or tubes, or it can clamp onto a flat surface up to 1.9" thick.
103,19 CHF HT
111,55 CHF TTC en stock7 pièce (s) en stock
-
Matthews 420114 - MQ Mount
MQ Mount for LED and Fluorescent Light Tubes
98,40 CHF HT
106,37 CHF TTC en stock2 pièce (s) en stock
-
Matthews 429582 - Junior Wall Plate
Junior Wall Plate
92,40 CHF HT
99,88 CHF TTC en stock4 pièce (s) en stock
-
Doughty T84160 - Studio Rail Extension Bracket - Adjustable Supplied With Rail Clamps
Studio Rail Extension Bracket - Adjustable Supplied With Rail Clamps
92,30 CHF HT
99,78 CHF TTC en stock19 pièce (s) en stock
-
Matthews 409100-1 - Corner for 1inches Square Tube
Corner for 1inches Square Tube
91,20 CHF HT
98,59 CHF TTC en stock8 pièce (s) en stock
-
Manfrotto D100 - Double Grip Head
Double Grip Head
89,00 CHF HT
96,21 CHF TTC en stock3 pièce (s) en stock
-
Matthews 429619 - Junior Pipe Clamp
Junior Pipe Clamp
85,50 CHF HT
92,43 CHF TTC en stock23 pièce (s) en stock
-
Matthews 420112-S15 - Mini Matthellini
Mini Matthellini
78,00 CHF HT
84,32 CHF TTC en stock5 pièce (s) en stock
-
Matthews 429499 - Extendable Baby Stand Extension
Extendable Baby Stand Extension
78,00 CHF HT
84,32 CHF TTC en stock27 pièce (s) en stock
-
Doughty T57224 - Clamp (Black)
Doughty Clamp (Black)
77,50 CHF HT
83,78 CHF TTC en stock4 pièce (s) en stock
-
Doughty T84230 - Cupped Curtain Brake
Cupped Curtain Brake
77,40 CHF HT
83,67 CHF TTC en stock11 pièce (s) en stock
-
Doughty T84220 - Cable Car X 5 (Steel Frame With Bearings)
Cable Car X 5 (Steel Frame With Bearings)
73,40 CHF HT
79,35 CHF TTC en stock1 pièce (s) en stock
-
Doughty T84165 - Studio Rail Adjustable Angle Bracket Supplied With Rail Clamps
Studio Rail Adjustable Angle Bracket Supplied With Rail Clamps
72,35 CHF HT
78,21 CHF TTC en stock1 pièce (s) en stock
-
Matthews 420210 - Matthellini Clamp
Matthellini Clamp - 6 inches End Jaw
68,34 CHF HT
73,88 CHF TTC en stock17 pièce (s) en stock
-
Manfrotto F810 - Baby Plate with 16mm Swivel Spigot
Baby Plate with 16 mm Swivel Spigot
67,00 CHF HT
72,43 CHF TTC en stock5 pièce (s) en stock
-
Doughty T84186 - 4 Wheel Car 5/8" Mini Spigot (Brake)
4 Wheel Car 5/8" Mini Spigot (Brake)
64,50 CHF HT
69,72 CHF TTC en stock2 pièce (s) en stock
-
Kupo KCP-241B - 40'' Grip Arm With Hex Baby Pin - Black
40'' Grip Arm With Hex Baby Pin - Black
62,90 CHF HT
67,99 CHF TTC en stock2 pièce (s) en stock
-
Manfrotto C4482 - MP Swivel Eye Coupler
MP Swivel Eye Coupler
60,75 CHF HT
65,67 CHF TTC en stock4 pièce (s) en stock
-
Matthews 259531 - Full Mini Apple Box 12 inches x 8 inches x 10 inches
Full Mini Apple Box 12 inches x 8 inches x 10 inches
60,00 CHF HT
64,86 CHF TTC en stock4 pièce (s) en stock
-
Manfrotto D200B - 2 1/2" Grip Head (Black)
2 1/2" Grip Head (Black)
59,00 CHF HT
63,78 CHF TTC en stock10 pièce (s) en stock
-
Doughty T84225 - Curtain Car X 5 (Steel Frame With Bearings)
Curtain Car X 5 (Steel Frame With Bearings)
56,85 CHF HT
61,45 CHF TTC en stock25 pièce (s) en stock
-
Doughty T58306 - Quick Trigger Slimline Hook Clamp (M12x45 Bolt & Wingnut) (Black)
Quick Trigger Slimline Hook Clamp (M12x45 Bolt & Wingnut) (Black)
55,85 CHF HT
60,37 CHF TTC en stock38 pièce (s) en stock
-
Dedolight DLTFH - Dedoflex Holder
This holder accepts the 30 cm (12) Dedoflex diffusers and reflectors and is mounted between the stand and the light head. Weight: 180 g (6.3 oz)
51,06 CHF HT
55,20 CHF TTC en stock14 pièce (s) en stock
-
Matthews 350623 - 1/4-20 to 5/8inch Female Receiver
1/4-20 to 5/8inch Female Receiver
50,40 CHF HT
54,48 CHF TTC en stock21 pièce (s) en stock
-
Manfrotto 026 - Swivel Umbrella Adapter (Lite-Tite)
The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4 inch-20 threads, to adapt to light stands with top studs smaller than the standard 5/8 inch. It requires an optional shoe for use of shoe-mount flash
46,00 CHF HT
49,73 CHF TTC en stock8 pièce (s) en stock
-
Matthews 350584 - MiniGrip Head
MiniGrip Head
42,00 CHF HT
45,40 CHF TTC en stock5 pièce (s) en stock
-
Doughty T84130 - Studio Rail 90 Degree Crossover Bracket Supplied With 4 X Rail Clamps
Studio Rail 90 Degree Crossover Bracket Supplied With 4 X Rail Clamps
41,50 CHF HT
44,86 CHF TTC en stock4 pièce (s) en stock
-
-
Matthews B429041 - 3 inches Baby Plate - Black
This Matthews Baby Plate with a 3" pin is a steel mounting plate featuring a black hyper-chrome finish. The 3" pin has a standard diameter of 5/8". The knurled tip at the end of the pin provides secure mounting and precise positioning. The base plate has six mounting holes to provide a variety of mounting options with user-supplied hardware.
39,60 CHF HT
42,81 CHF TTC en stock25 pièce (s) en stock
-
Matthews 429041 - 3 inches Baby Plate
3 inches Baby Plate
39,60 CHF HT
42,81 CHF TTC en stock9 pièce (s) en stock
-
Doughty T2820501 - Safety Bond 50kg SWL 4mm x 700mm + Screw Carabiner - Black
Safety Bond 50kg SWL 4mm x 700mm + Screw Carabiner - Black
39,15 CHF HT
42,32 CHF TTC en stock30 pièce (s) en stock
-
Manfrotto C4461 - MP Coupler with 1 1/8" (28mm) Spigot
The C4461 MP Coupler with 1 1/8" (28mm) Spigot is ideal suspending lights from pipe lengths or trussing in theaters, on film sets or public venues
37,50 CHF HT
40,54 CHF TTC en stock2 pièce (s) en stock
-
Manfrotto 035FTC - Super Clamp In Box (Bulk)
Super Clamp In Box (Bulk)
37,00 CHF HT
40,00 CHF TTC en stock11 pièce (s) en stock
-
Doughty T84120 - Studio Rail Ceiling Bracket 25mm High (Top Hat) Supplied With Rail Clamps
Studio Rail Ceiling Bracket 25mm High (Top Hat) Supplied With Rail Clamps
33,45 CHF HT
36,16 CHF TTC en stock2 pièce (s) en stock
-
Doughty T84121 - Studio Rail Ceiling Bracket 50mm High (Top Hat) Supplied With Rail Clamps
Studio Rail Ceiling Bracket 50mm High (Top Hat) Supplied With Rail Clamps
33,45 CHF HT
36,16 CHF TTC en stock10 pièce (s) en stock
-
Doughty T45851 - Safety Bond 4mm X 650 With M6 Quick Link (100kg) Black
Safety Bond 4mm X 650 With M6 Quick Link (100kg) Black
32,71 CHF HT
35,36 CHF TTC en stock60 pièce (s) en stock
-
Matthews 429599 - 6 inches Pin with Collar
6 inches Pin with Collar
32,40 CHF HT
35,02 CHF TTC en stock2 pièce (s) en stock
-
Matthews 350610 - Adapter 3/8inches to 1/4inches for Micro Grip
Adapter 3/8inches to 1/4inches for Micro Grip
31,20 CHF HT
33,73 CHF TTC en stock18 pièce (s) en stock
-
Kaiser K5023 - Universal Clamp
To mount on tubes and boards. Also useful as a holding clamp on tripods and fixtures
27,73 CHF HT
29,98 CHF TTC en stock14 pièce (s) en stock
-
Dedolight DLBSA-JSF - 16mm female receptacle to female hot-shoe mount adapter
16mm receptacle (female) to hot-shoe mount adapter (female). Fits DLED2HSM and DLED2YHSM light heads.
23,13 CHF HT
25,00 CHF TTC en stock1 pièce (s) en stock
-
Doughty T84071 - Studio Rail Studio Rail Joiner Kit (Black)
Studio Rail Studio Rail Joiner Kit (Black)
22,95 CHF HT
24,81 CHF TTC en stock9 pièce (s) en stock
-
Matthews 350625 - Baby Pin Adapter 5/8" Female to 1/4-20" Male
Baby Pin Adapter 5/8" Female to 1/4-20" Male
22,80 CHF HT
24,65 CHF TTC en stock10 pièce (s) en stock
-
Matthews 350614 - Hot Shoe Adapter 3/8inches to 1/4inches
Hot Shoe Adapter 3/8inches to 1/4inches
22,80 CHF HT
24,65 CHF TTC en stock25 pièce (s) en stock
-
Manfrotto F800 - 3" Baby wall plate
Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used
21,00 CHF HT
22,70 CHF TTC en stock10 pièce (s) en stock
-
Manfrotto 143F - Fork for Styrene Gobos
Fork attachment for styrene gobos: supplied with 1/4In and 3/8In female attachment
19,50 CHF HT
21,08 CHF TTC en stock11 pièce (s) en stock
-
Manfrotto 175Z - Spring Clamp, Universal clamp with 5/8" socket
Spring Clamp, Universal clamp with 5/8 '' socket
18,00 CHF HT
19,46 CHF TTC en stock14 pièce (s) en stock
-
Manfrotto 185 - 16mm Male Adapter 5/8" with 17mm
16mm Male Adapter 5/8"with 17mm
17,25 CHF HT
18,65 CHF TTC en stock4 pièce (s) en stock
-
Dedolight DLBSA-S - Female shoe adapter to 1/4“ male
Female shoe adapter to 1/4 male
16,65 CHF HT
18,00 CHF TTC en stock6 pièce (s) en stock
-
Doughty T84080 - Studio Rail End Stops X 4
Studio Rail End Stops X 4
15,45 CHF HT
16,70 CHF TTC en stock9 pièce (s) en stock
-
Doughty T81100 - Rail - Joint Kit (Includes Joint Pin)
Doughty Rail - Joint Kit (Includes Joint Pin)
15,10 CHF HT
16,32 CHF TTC en stock4 pièce (s) en stock
-
Kaiser K3272 - Hand Grip
For lighting units, cameras, etc. With foam shell and grip shape. Connection thread 1/4" with washer made of elastic plastic, tripod thread 1/4". Includes snap-hook with key-ring and fixture for tripod thread
13,82 CHF HT
14,94 CHF TTC en stock7 pièce (s) en stock
-
Falcon Eyes 299947 - Wall Mount FA-027B H 12 cm
Falcon Eyes Wall Mount FA-027B H 12 cm
13,60 CHF HT
14,70 CHF TTC en stock3 pièce (s) en stock
-
Doughty T81150 - Rail - 50mm Top Hat
Doughty Rail - 50mm Top Hat
13,20 CHF HT
14,27 CHF TTC en stock1 pièce (s) en stock
-
Doughty T2841001 - Black Safety Bond 2mm x 600mm, 20kg SWL
The T2841001 is a black steel wire rope safety bond 2mm x 600mm long, soft loops at each end & comes with an M6 screwgate carbine hook at one end. It has a Safe Working Load of 20Kg.
12,88 CHF HT
13,92 CHF TTC en stock30 pièce (s) en stock
-
Kaiser K5048 - Reversible Thread Pin
With 1/4 and 3/8 mounting threads. For use with stands, clamps and other mounting devices with 16 mm standard sleeve. Pin is mounted to the light and is inserted into the 16 mm sleeve of the stand or mounting accessory.
11,52 CHF HT
12,45 CHF TTC en stock14 pièce (s) en stock
-
Doughty T81170 - Rail - Wall Bracket
Doughty Rail - Wall Bracket
11,30 CHF HT
12,22 CHF TTC en stock4 pièce (s) en stock
-
Nanlite HD-T12-1-MC - T12 Transparent Clip with Magnet
The PavoTube II Transparent Polycarbonate T12 Clip with Magnetfrom Nanlite is the waterproof end cap thet prevents water damage and allows the tube to be submerged when using the optional transparent waterbag.
11,10 CHF HT
12,00 CHF TTC en stock2 pièce (s) en stock
-
Doughty T84075 - Studio Rail Spare Joint Pins X 5
Studio Rail Spare Joint Pins X 5
10,50 CHF HT
11,35 CHF TTC en stock5 pièce (s) en stock
-
Doughty T220025 - Safety Bond 25kg (585mm x 3mm M6 Carbine Hook) Black
Safety Bond 25kg (585mm x 3mm M6 Carbine Hook) Black
9,38 CHF HT
10,14 CHF TTC en stock30 pièce (s) en stock
-
Manfrotto 036-38 - Standard Stud with 3/8" Screw for Super Clamp
The Mafrotto Standard Stud with 3/8" Screw snaps into a Super Clamp socket. It has a 3/8" screw thread at its other end. Use it directly with equipment that features a 3/8" socket, or with a camera head
9,00 CHF HT
9,73 CHF TTC en stock10 pièce (s) en stock
-
Manfrotto 088 - Female 1/4-20 to Male 3/8 inch Thread Adapter
Female 1/4-20 to Male 3/8 inch Thread Adapter
9,00 CHF HT
9,73 CHF TTC en stock1 pièce (s) en stock
-
Doughty T81161 - Rail - Slide in End Stop
Doughty Rail - Slide in End Stop
7,55 CHF HT
8,16 CHF TTC en stock1 pièce (s) en stock
-
Falcon Eyes 296933 - Suspended Clamp CL-C35
Falcon Eyes Suspended Clamp CL-C35
4,83 CHF HT
5,22 CHF TTC en stock6 pièce (s) en stock
-
Doughty T81190 - Rail - Channel Nut - (M6 Unistrut Nut)
Doughty Rail - Channel Nut - (M6 Unistrut Nut)
1,45 CHF HT
1,57 CHF TTC en stock45 pièce (s) en stock
-
Kaiser K5780 - Wolfenbüttel book mirror 45N
Device for retro-digitizing sensitive historical books and documents in critical condition, especially for books that cannot be opened more than 45°.
Délai habituel entre 2 et 4 semaines
17 483,64 CHF HT
18 899,81 CHF TTC en stock -
Matthews 377790 - Litemover
Litemover
13 800,00 CHF HT
14 917,80 CHF TTC en stockDélai habituel 8 semaines
-
Kaiser K5710 - "RSP 2motion" Copy Stand
Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment. Accepts originals up to 100 x 80 cm (39.4 x 31.5 in.). Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales
Délai habituel entre 2 et 4 semaines
10 230,28 CHF HT
11 058,93 CHF TTC en stock -
-
Profoto Pro P100737 - Strip Light L (120V for Pro-7 / Pro-B2)
Profoto offers three special light bars in 70cm, 130cm, and 190cm lengths. All are 10cm wide and offer a very even light distribution to create homogeneous highlights. This Large Striplight is equipped with three separate lamp cables, which allow distribution of the light differently for graduation control.
Délai habituel entre 2 et 4 semaines
6 499,00 CHF HT
7 025,42 CHF TTC en stock -
Kaiser K5727 - RSP Xtra autoDrive reproduction stand (with stand)
Professional floor stand for reprography of the rePRO system. Camera stand with motorized height adjustment via PC/laptop or wired remote control
Délai habituel entre 2 et 4 semaines
6 433,09 CHF HT
6 954,17 CHF TTC en stock -
Kaiser K5711 - "RSP Xtra" Copy Stand
Heavy-duty copy stand for analogue and digital image capturing work with motor-driven height adjustment. Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales
Délai habituel entre 2 et 4 semaines
5 963,05 CHF HT
6 446,06 CHF TTC en stock -
Arri L0.0050673 - Orbiter Fresnel Set
The ARRI Orbiter Fresnel Set comprises a blue/silver Orbiter light with a 15 to 65° Fresnel lens, a manual yoke, a control panel with a 16.4' cable, and a 9.8' bare ends powerCON TRUE1 TOP cable with an inline switch. This kit provides a fully motorized zoom angle using local or remote control and can be powered via AC or 48V batteries.
Délai habituel entre 2 et 4 semaines
4 194,00 CHF HT
4 533,71 CHF TTC en stock -
Matthews 415152 - Lazy Suzy
Lazy Suzy
4 144,80 CHF HT
4 480,53 CHF TTC en stockDélai habituel 8 semaines
-
Doughty T63845 - Track Drive - Electric - Track Mounted
Track Drive - Electric - Track Mounted
4 118,40 CHF HT
4 451,99 CHF TTC en stockDélai sous 6 à 8 semaines
-
Manfrotto FF3043 - Top System 43
Complete kit for medium-sized studios composed of 2 fixed rails 4m long, 2 mobile rails 3m long and supports for 3 light sources (3 Top Pantographs)
3 987,00 CHF HT
4 309,95 CHF TTC en stockDélai habituel entre 3 et 5 semaines
-
Doughty T63725 - Sixtrack Points System
Sixtrack Points System
3 977,75 CHF HT
4 299,95 CHF TTC en stockDélai sous 6 à 8 semaines
-
Matthews B395400K - Dutti Dolly Rental Kit (Black)
Dutti Dolly Rental Kit (Black)
3 780,00 CHF HT
4 086,18 CHF TTC en stockDélai habituel 8 semaines
-
Kaiser K5612 - RSP rePRO Column
Made of special aluminum tube, black anodized, with printed cm and inch scales. Height adjustment motorized, with two speeds. Cable remote control
Délai habituel entre 2 et 4 semaines
3 376,91 CHF HT
3 650,44 CHF TTC en stock -
Profoto Pro P100735 - Strip Light S (120V for Pro-7 / Pro-B2)
Profoto offers three special light bars in 28, 51 or 75" lengths. All are 10cm wide and offer a very even light distribution to create homogeneous highlights. The Profoto StripLights can be used with all Acute2, D4, Pro-7 and Pro-B2 power packs. A power supply for this flash head is required.
Délai habituel entre 2 et 4 semaines
3 249,50 CHF HT
3 512,71 CHF TTC en stock -
Dedolight DLH650-MO - Motorized yoke for 650 Watt light head
Special version, built on order only. Delivery times on request. Motorized yoke for 650 Watt light head, separate DMX control box incl. PSU. 650 Watt light head not included (DLH650 / DLH650-DMX).
2 844,59 CHF HT
3 075,00 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Dedolight DLH652T-MO - Motorized yoke for 650 Watt light head
Special version, built on order only. Delivery times on request. Motorized yoke for 650 Watt light head, separate DMX control box incl. PSU. 650 Watt light head not included (DLH652T / DLH652T-DMX)
2 844,59 CHF HT
3 075,00 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Quasar Science 929-0250 - Ossium Ladder Kit with Lift Bar
The Ossium Ladder Kit with Lift Bar from Quasar Science is a slim and versatile light-hanging system for mounting LED tube lights, such as the Quasar Science Rainbow. Made to be hung from overhead, the system is composed of pipes, wires, and brackets that allow you to hang up to 16 tube lights to make one large array.
Délai habituel entre 2 et 4 semaines
2 827,50 CHF HT
3 056,53 CHF TTC en stock -
Kaiser K5600 - RSDmot 1.8 Copy Stand
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales. Camera carrier made of aluminum section, can be horizontally adjusted over approx. 25 cm (9.8 in.) with rack-and-pinion parallel guides
Délai habituel entre 2 et 4 semaines
2 770,47 CHF HT
2 994,88 CHF TTC en stock
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
