Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Side flag kit assy MB-250/300/310/315/320/325, DVMB-WA MKII (3 pcs.)
1 pièce (s) en stock
Side flag kit MB4XX. Consisting of two retractable side doors.
1 pièce (s) en stock
19mm to 15mm Adapter.
2 pièce (s) en stock
15 mm General lens support including 4 adapters
2 pièce (s) en stock
Vocas Side flag kit MB-350. (2 pcs.)
1 pièce (s) en stock
19mm Adaptor for Swing Away MKII
1 pièce (s) en stock
Aluminum filter holder 4x5,65
1 pièce (s) en stock
Filter frame 150 mm wide 5x5 for MB-4XX.
2 pièce (s) en stock
Aluminum filter holder 4x5
1 pièce (s) en stock
Filter frame 121 mm wide 4x5,65 for MB-4XX, as spare. 1pc.Included in MB-450
1 pièce (s) en stock
Intermediate ring diameter 130:110 (thread) for use of insertrings 110:xx mm (f. MB456 + 450W)
1 pièce (s) en stock
R4 Screw-In Reduction Ring 114 mm-105 mm
1 pièce (s) en stock
Adapter Plate for 15mm rails.
1 pièce (s) en stock
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-136mm)
1 pièce (s) en stock
Lens Clamp Adapter(114mm)
1 pièce (s) en stock
Zip Box Adapter Rings (49, 52, 55, 58, 62, 67, 72, 77mm)
1 pièce (s) en stock
1 pc. Length 250mm
1 pièce (s) en stock
SmallRig Filter Tray (4 x 5.65) 3319 forms part of Mini Matte Box 3196 and allows for quick installation of 4 x 5.65" plug-in filters of 4mm in thickness.
4 pièce (s) en stock
The LMB 4x5 set to fulfill all needs with the most modular matte box - from single stage, to three stage, to bottom and top lightweight mounted, to the full-blown version with swing-away tilt module, all carbon fiber flags (top and side) and both extra filter stages (rotatable and non-rotatable)
This FreeStyle Air RGB LED Light Panel DMX System Universal Kit from Kino Flo features the 39.5 x 13 x 2" FreeStyle Air panel and a compatible 140 LED DMX controller
Délai de livraison de 4 à 6 semaines
The Upgrade Set LMB-25 to LMB 4x5 Pro comes in a foam insert that fits perfectly into any kind of Peli Case 1560
This set inlcudes 13 different clamp adapters to use with LMB 4x5
The 11 different included clamp adapters cover the most common lens diameters from 95 mm to 165 mm.
This set includes one Diopter Stage, one Diopter Adapter and three Diopter Frames including all pouches. With this set rentals could offer their diopter set (+0.5, +1, +2 each in a Diopter Frame and +3 in a Diopter Stage) for best storage to avoid any damages on the glass.
RMT Base Unit with single 4x5.650 Tiffen Ultra-Thin Circular Polarizer. Variable ND and Colour FX (Warm/Cold)
Délai habituel entre 2 et 5 semaines
The 5-Axis Diopter Holder Kit from Vocas pairs the 15mm LWS rod-compatible diopter holder with a 19mm studio rod adapter. Use this versatile rig to create focal plane effects with a single 138mm round diopter.
Clamp-On MatteBox MB 565 Double Kit, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 5.65x5.65/ 4x5.650 (510-06) each independently 360° rotatable, clamp adapter with diameter 150mm, 3 step-down rings diameter 150 to: 136mm (511-136), 114mm (511-114), 104mm (511-104), in case
Clamp-On MatteBox MB 565 Double Kit, for Cine FullFrame cameras, includes: *Clamp adapter with ? 150mm * 501-26: French Flag * 510-07: 2 Filterholders multiformat 4x5.65/4x4 - short -, each independently rotating 360° * 3 step-down rings ?150 to: 511-104, 511-114, 511-136 * 565-CASE: Case with insert
A set with the 4 most popular LMB 4x5 clamp adapters and in addition the 143mm adapter which provides the possibility to attach the LMB 4x5 on 15mm lightweight support rods. Includes: 1x K2.0014168; 1x K2.0014396; 1x K2.0014409; 1x K2.0014439; 1x K2.0014376; 1x K2.47190.0; 1x K2.65045.0; 1x K2.65271.0; 1x K2.65165.0; 1x K2.0013427.
The 5-Axis Diopter Holder from Vocas is a single 138mm round filter holder compatible with 15mm LWS rod systems.
Rotating Multi Tray (RMT) with 138mm geared Tiffen Ultra-Thin Circular Polarizer Base Unit
Délai habituel entre 2 et 5 semaines
This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections. For use with 15mm studio rod system.
This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module that allows 10° up and down adjustments to avoid unwanted reflections. For use with 19mm studio rod system.
The Extra Rotatable Filter Stage gives the possibility to rotate an additional 6.6 inch x 6.6 inch filter 360°. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without the need for any tools.
The carbon fiber Side Flags, each including one extendable wing to prevent possible image quality loss caused by stray light.
Clamp-On MatteBox MB 565 Double, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 5.65x5.65/ 4x5.650 (510-06) each independently 360° rotatable, clamp adapter with diameter 150mm
Clamp-On MatteBox MB 565 Double, for Cine FullFrame cameras, incl. French Flag (501-26), 2 filterholders multiformat 4x5.650 /4x4 (510-07) each independantly 360° rotating, clamp adapter w. ? 150mm
The Rota Pola Filter Frame 6.6x6.6 has the same width as a regular F1 filter frame and therefore, only takes the space of one filter in a filter stage. Ships in a filter pouch.
The diopter stage can be used at the back of a 6.6 inch x 6.6 inch clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and ? inch mounting threads are included. Compatible...
Clamp-On MatteBox MB 565 Single, for Cine FullFrame cameras, incl. French Flag (501-26), 1 filterholder multiformat 5.65x5.65/ 4x5.650 (510-06), clamp adapter with diameter 150mm
Clamp-On MatteBox MB 565 Single, for Cine FullFrame cameras, includes: *Clamp adapter with ? 150mm 501-26: French Flag 501-07: 1 Filterholders 4x5.65/4x4 short, each independently 360°rotatable
MMB-2 Basic Module double 4x5,65
The carbon fiber Top, Bottom Flag including two extendable wings to prevent possible image quality loss caused by stray light. It can be fitted to the top or at the bottom of the LMB 6x6 Basic Module and will cover the opening of the sunshade 100% for best protection during a break.
Complete Swing-Away Unit for diameter 15mm rods for MB 565
Complete Swing-Away Unit for diameter 19mm rods for MB 565
R1 138mm Filter Ring diameter 125 mm - For Angénieux 25-250HP with rubber sleeve and connection ring.
To upgrade the LMB-25 on the platform of the new LMB 4x5. Kit includes: K2.0013825 1x LMB 4x5 Flag Holders; K2.0015140 1x LMB 4x5 backplate with filter guides
The module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections
A set with the 4 most popular LMB 4x5 clamp adapters. Includes: K2.0014396 1x LMB 4x5 Clamp Adapter 114mm; K2.0014409 1x LMB 4x5 Clamp Adapter 110mm; K2.0014439 1x LMB 4x5 Clamp Adapter 95mm; K2.0014376 1x LMB 4x5 Clamp Adapter 80mm
A set of two carbon fiber side flags, each extendable on the top
Side Flag Set for MMB-2. Includes: K2.66150.0 1x Side Flag left; K2.66148.0 1x Side Flag right; K2.66134.0 2x Side Flag Holder.
An optional 360° rotatable third filter stage for the LMB 4x5, with integrated tray catcher. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters
The Rota Pola Filter Frame 4x5,65 has the same width of a regular F4 filter frame and therefore only takes the space of one filter in a filter stage. The glass inside is a round shaped circular polarizer which takes less than 1.2 stops of light
The diopter stage can be used at the back of a 4 inch x 5.65 inch clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and ? mounting threads are included
The diopter frame allows 6 inch diopters of up to +1 and in combinations with the Diopter Adapter 6in to 138mm, up to +2 Diopter. The frame is compatible with the ARRI LMB 6x6, LMB-6 and SMB-1. The frame has the width of two 6.6 inch x 6.6 inch filter frames and fits into a 2- or 3-filter stage.
Reduction/Clamp-On Ring Set Cine Pro. Includes: K2.66149.0 1x Reduction/Clamp-On Ring 110mm, Cooke S4; K2.66146.0 1x Reduction/Clamp-On Ring 104mm,UP LDS; K2.66147.0 1x Reduction/Clamp-On Ring 95mm, UP; K2.66190.0 1x Reduction/Clamp-On Ring 87mm; K2.66160.0 1x Reduction/Clamp-On Ring 80mm.
The Extra Non-Rotatable Filter Stage makes it possible to use an additional 6.6 inch x 6.6 inch filter. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without using any tools. For extreme lightweight applications such as gimbal and Steadicam the separate single filter stage works perfectly in conjunction with any...
A carbon fiber flag, with two extensions,which can be mounted at the top or the bottom of the LMB 4x5 - compatible with LMB-5, LMB-15, and LMB-25
The Swing away bracket features a unique design that allows the user to move the mattebox forward and swing it away from the lens, by rotating one single knob.
Still Lens Clamp-On Set Pro for still photo lenses threads. Includes: K2.66140.0 1x Still Lens Clamp-On Ring 52; K2.66143.0 1x Still Lens Clamp-On Ring 58; K2.66138.0 1x Still Lens Clamp-On Ring 62; K2.66126.0 1x Still Lens Clamp-On Ring 67; K2.66137.0 1x Still Lens Clamp-On Ring 72; K2.66136.0 1x Still Lens Clamp-On Ring 77; K2.66139.0 1x Still Lens...
Micro Four Third (MFT) to PL adapter including 15mm support.
R1 6 Filter Ring diameter 144,4 mm - For Cooke 20-100.
Light Protection Ring Set Pro. Includes: K2.66156.0 1x Connection Ring flexible 52; K2.66157.0 1x Connection Ring flexible 58; K2.66154.0 1x Connection Ring flexible 62; K2.66152.0 1x Connection Ring flexible 67; K2.66153.0 1x Connection Ring Flexible 72; K2.66151.0 1x Connection Ring flexible 77; K2.66155.0 1x Connection Ring flexible 82; K2.66161.0 1x...
R1 138 mm Filter Ring diameter 87 mm (no reduction rings) - For ZEISS Vario Sonnar T2/10-100II - and T2.2/11-110.
UMB-1 Universal Mattebox (Bellows Set)
Délai habituel entre 8 et 12 semaines
The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweight matte box such as the ARRI LMB-25. The frame has the width of two 4 x 5.65 filter frames and fits into a 2- or 3-filter stage. A safety mechanism prevents the diopter from falling out of the frame during exchange, while two ? threads permit the frame to be attached to an...
F2 Filter Frame round - For round filter diameter 138mm.
R1 138mm Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
An optional non-rotatable third filter stage for the LMB 4x5. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters. The LMB 4x5 sunshade can be mounted directly to the front of the filter stage
R1 6 Filter Ring diameter 114 mm - With rubber sleeve for Master Prime Lenses - UP14 mm - UP180mm - LDS-UP 14 mm and LDSUP 180 mm. Takes reduction rings size R4
R1 138mm Filter Ring diameter 95 mm - For Ultra Primes 16-135mm with rubber sleeve and connection ring. Not for use with wide angle video zooms.
The triple filter frames accommodate two or three filters in a single filter frame taking two regular matte box slots and prevent unwanted reflections between glass filter surfaces. Although compatible with some legacy ARRI matte boxes, the triple filter frame achieves maximum benefits when used in combination with the tilting matte box SMB-1. Fits in a...
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage
Triple filterstage - rotatable - without Filterholders - for MB 805
With rubber sleeve for UP 14 mm - UP 180mm - LDS-UP 14 mm and LDS-UP 180mm. Not compatible with Master Prime Lenses 14 mm and 16 mm. Takes reduction rings size R4
R1 Reflex Prevention Ring diameter 156mm - For UP 10 mm - UP 12mm and LDS-UP 12 mm.
R1 138 mm Filter Ring diameter 80 mm - For ZEISS Standard Primes with rubber sleeve and connection ring. When using physically short Lenses such as ZEISS Standards - K2.34131.0 - R1 Intermediate Ring is required in addition.
R1 6 Universal Filter Ring diameter 150mm - For VP1 - VP2 - VP3 - Cooke18-100 and Cinetal 25-250. - Takes reduction rings size R8
R12 Clamp-OnRing 156-150 mm - for use with Cooke 18-100 mm + 25 -250 mm Cinetal + Arri VPs
R2 138 mm Filter Ring diameter 114 mm - Compatible with Master Prime Lenses - UP 14mm - UP 180 mm - LDS-UP 14 mm and LDS-UP 180 mm. Takes reduction rings size R4
UMB-1 Universal Mattebox (Clamp On Set)
Délai habituel entre 8 et 12 semaines
Hand Grip Set for MMB-2 (pair)
Right handed ergonomically shaped wooden handgrip.Equipped with Arri style rosette.
Wooden handgrip (left hand).
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 114mm Back
Délai de livraison de 4 à 6 semaines
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 134mm Back
Délai de livraison de 4 à 6 semaines
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 80mm Back
Délai de livraison de 4 à 6 semaines
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 85mm Back
Délai de livraison de 4 à 6 semaines
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 95mm Back
Délai de livraison de 4 à 6 semaines
4X5.65 Carbon Fiber Matte Box (Clamp-on) with 110mm Back
Délai de livraison de 4 à 6 semaines
MBS-100 Type I, Mattebox support 15 mm. For Panasonic AGHPX300
R1 138 mm Filter Ring diameter 161 mm
Wireless Control Kit for Tilta Mirage
Délai de livraison de 4 à 6 semaines
Filter orients vertically when inserted from above.
Allows one or two glass filters to be stacked and angled, providing a quick and elegant solution for reducing unwanted reflections. Fits in a 2-stage slot of a filter stage and is compatible with LMB-25, LMB-15 and LMB-5
For UP 16 mm-135 mm - 16 mm zooms and medium-focal-length video zooms. Notfor use with wide-angle video zooms.
MB-600 Double rotatable filter stage
F2 Filter Frame 4x4 - geared
R1 Reflex Prevention Ring diameter 134mm - For Arri/FUJINON Alura Zooms.
For ZEISS Vario Sonnar. Takes reduction rings size R6