Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Ace Battery Plate Canon LP-E6 / Sony NP-F550
1 pièce (s) en stock
VIA Campus2 PLUS is a simultaneous wired and wireless presentation and collaboration solution that makes it easier to get actual work done during meetings.
VIA Campus2 Wireless Presentation Hub enables wireless streaming at up to 4K UHD resolution via HDMI or DisplayPort connectivity to your displays for smooth, detailed video.
Antenna Array for Bolt 4K RX (Gold-Mount) in Custom Case
Antenna Array for Bolt 4K RX (V-Mount) in Custom Case
The VIA Connect2 enables wired and wireless streaming at up to 4K60 resolution via HDMI input and output to a display for smooth, detailed video.
Antenna Array for Bolt 4K RX (Gold-Mount)
Antenna Array for Bolt 4K RX (V-Mount)
Antenna Array for Bolt 4K V Mount
Délai habituel entre 2 et 6 semaines
Antenna Array for Bolt 4K Gold Mount
Délai habituel entre 2 et 6 semaines
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Délai habituel entre 2 et 6 semaines
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Délai habituel entre 2 et 6 semaines
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Délai habituel entre 2 et 6 semaines
VIA GO2 gives iOS, Android, Chromebook, PC, and Mac users instant wireless connectivity with 4K advanced presentation capabilities.
Case XL - Bolt 6 XT TX/4RX and Antenna Array
Délai habituel entre 2 et 6 semaines
Case XL - Bolt 6 LT TX/4RX and Antenna Array
Délai habituel entre 2 et 6 semaines
Bolt Sidekick Dual V-Mount Batt.plate 14.4V
Délai habituel entre 2 et 6 semaines
Large Case for Bolt 6 XT TX and 2 RX
Délai habituel entre 2 et 6 semaines
Case Large - Bolt 6 LT TX/2RX
Délai habituel entre 2 et 6 semaines
5GHZ Antenna 14DBI Gain, 40 degrees Horizontal angle, 35 degrees Vertical angle.
Bolt-On Monitor Hinge Cube
Délai habituel entre 2 et 6 semaines
Teradek Pro Battery Plate 26V, Female Gold-Mount (Bolt Array Antenna)
Délai habituel entre 2 et 6 semaines
This Single Battery Plate from Teradek enables you to power your Serv 4K, Bolt 4K, or Bolt 6 transmitter or receiver using a long-lasting Gold mount battery, and it also supports Anton/Bauer Gold Mount Plus batteries.
Délai habituel entre 2 et 6 semaines
This Single Battery Plate from Teradek enables you to power your Serv 4K, Bolt 4K, or Bolt 6 transmitter or receiver using a long-lasting Gold mount battery, and it also supports Anton/Bauer Gold Mount Plus batteries.
Délai habituel entre 2 et 6 semaines
Bolt 4K V-Mount Battery Plate (Male)
Délai habituel entre 2 et 6 semaines
Bolt 4K V-Mount Battery Plate (Female)
Délai habituel entre 2 et 6 semaines
Bolt 4K Gold Mount Battery Plate (Male)
Délai habituel entre 2 et 6 semaines
The USB to 5pin Control Hub for Smart 7 Monitors is an included piece of our Wireless Camera Control Kit for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Délai habituel entre 2 et 6 semaines
The Wireless Camera Control Adapters for Bolt 4K are included pieces of Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Délai habituel entre 2 et 6 semaines
USB to 5pin Adapter for Bolt 4K RX
Délai habituel entre 2 et 6 semaines
The Teradek USB To 5pin Adapter For Bolt 4K LT TX is included in Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Délai habituel entre 2 et 6 semaines
The Wireless Camera Control Adapters for Bolt 4K are included pieces of Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Délai habituel entre 2 et 6 semaines
Barrel Antenna V N-type
Délai habituel entre 2 et 6 semaines
Barrel Antenna H N-type
Délai habituel entre 2 et 6 semaines
This Teradek 18W AC Adapter Cable can be used with all Teradek Bolt and Cube units. It runs 6 feet long, features a 2-pin LEMO connector on one end, and supports included interchangeable, international AC plugs on the other end.
Délai habituel entre 2 et 6 semaines
This 2-Pin LEMO to AC Adapter Cable from Teradek is a 6 ft power cable designed for use with the Teradek Cube, Bolt, Bond, and Link.
Délai habituel entre 2 et 6 semaines
6G V Antenna Kit - 7 Bolt HDMI Upgrade
Délai habituel entre 2 et 6 semaines
Slot-in adapter for DWX receiver DWR-S03D (25-pin Uni Slot)
Slot-in adapter for DWX receiver DWR-S03D (15-pin Sony Slot)
PTap to 2pin Power Cable (9in/22cm)
Délai habituel entre 2 et 6 semaines
PTap to 2pin Power Cable (11in/27cm)
Délai habituel entre 2 et 6 semaines
PTap to 2pin Power Cable for Backpacks (11in/27cm)
Délai habituel entre 2 et 6 semaines
The 18" 4-Pin LEMO to D-Tap Cable from Teradek can be used to power the Cube encoders or decoders from a D-Tap source.
Délai habituel entre 2 et 6 semaines
Bolt 4K Antenna Extension Kit
Délai habituel entre 2 et 6 semaines
The 5pin to 5pin USB Cable is a replacement part for the included cable in Teradek's Wireless Camera Control Starter Kit.
Délai habituel entre 2 et 6 semaines
5 pin to USB type A 12in Cable
Délai habituel entre 2 et 6 semaines
5 pin to USB-C 12in Cable
Délai habituel entre 2 et 6 semaines
5 pin to 4 pin 24in Cable
Délai habituel entre 2 et 6 semaines
5 pin to 5 pin 24in Cable
Délai habituel entre 2 et 6 semaines
Prism Mobile Node Bracket Set
Délai habituel entre 2 et 6 semaines
Bolt 6 Universal Mounting Block
Délai habituel entre 2 et 6 semaines
Replacement Bolt 4K Wireless Horizontally Polarized Mushroom H Antenna
Délai habituel entre 2 et 6 semaines
Bolt TX/RX 1000/3000 Accessory Plates Kit with all colors (y/r/g/b)
Délai habituel entre 2 et 6 semaines
D-Tap to 2-Pin Connector Power Cable (18", Non-Regulated)
The Atom 500 SDI Essentials Kit from Vaxis provides several items designed to complement your Atom 500 SDI wireless video transmission kit. Kit items include a thin BNC cable with two right-angle connectors, a travel case, a 1/4"-20 tilting shoe bracket, and protective skin wraps for both your transmitter and receiver.
BIT-785 Bolt RX 500/1000/3000 Mounting Bracke
Délai habituel entre 2 et 6 semaines
Bolt 4K Tx Mounting Bracket
Délai habituel entre 2 et 6 semaines
Use this 18" 12G-SDI UHD 4K Single-Channel BNC Cable from Teradek to send and receive 12G-SDI UHD 4K signals over a single coaxial BNC cable.
Délai habituel entre 2 et 6 semaines
2pin to Right-Angle Barrel Power Cable (Approx 45cm)
Délai habituel entre 2 et 6 semaines
RT MDR.X Ext Antenna
Délai habituel entre 2 et 6 semaines
PTap to Right-Angle Barrel Power Cable 18"
Délai habituel entre 2 et 6 semaines
900 MHz swivel antenna for RF-900 radio module.
Replacement Wireless Antenna for Beam
Délai habituel entre 2 et 6 semaines
Replacement Wireless Antenna for Node - Long
Délai habituel entre 2 et 6 semaines
Replacement Wireless Antenna for Bolt 3000 TX
Délai habituel entre 2 et 6 semaines
Antenna Cap Replacement - MK3.1 Controller or Receiver
Délai habituel entre 2 et 6 semaines
When you're on a busy set and need to change settings for a Bolt 6 XT wireless setup on your monitors and cameras, it may get confusing as to which one is which when there is more than one wireless setup.
Délai habituel entre 2 et 6 semaines
When you're on a busy set and need to change settings for a Bolt 6 LT wireless setup on your monitors and cameras, it may get confusing as to which one is which when there is more than one wireless setup.
Délai habituel entre 2 et 6 semaines
Antenna Ext 600-6000 Mhz SMA Male (2-Pack) (Prism Mobile)
Délai habituel entre 2 et 6 semaines
Prism Mobile short Antenna 0.617-3.8ghz SMA (2-Pack)
Délai habituel entre 2 et 6 semaines
2.4GHz 28.4mm Antenna for CTRL.5 / MDR.S
Délai habituel entre 2 et 6 semaines
When your DSMC2 module is not in use, fit a Teradek OMOD | AKS MOD GUARD to it using the module's screws to protect the Pogo connection pins.
Délai habituel entre 2 et 6 semaines
The Vaxis Travel Case is designed to safely store and transport your Atom 500 HDMI wireless video transmission kit.
Mount your ATOM 500 SDI transmitter or receiver onto a shoe mount using this Cold Shoe Mount from Vaxis.
2x Replacement Straight Wireless Antenna for COLR
Délai habituel entre 2 et 6 semaines
2x Replacement Dual Band Wireless Antenna for Cube
Délai habituel entre 2 et 6 semaines
2x Replacement Right Angle Wireless Antenna for COLR
Délai habituel entre 2 et 6 semaines
These flexible bands wrap around the Ultra 7 Bolt 6 receiver monitor and allow you to see the color of the unit and find its paired device. The kit includes one each black, blue, green, red, and yellow band.
Délai habituel entre 4 et 9 semaines
These flexible bands wrap around the Ultra 7 Bolt 6 transmitter monitor and allow you to see the color of the unit and find its paired device. The kit includes one each black, blue, green, red, and yellow band.
Délai habituel entre 4 et 9 semaines
Replacement Wireless Antenna for Node - Short
Délai habituel entre 2 et 6 semaines
Green Identification Plate for Bolt 1000/3000 Receiver
Délai habituel entre 2 et 6 semaines
The 12" N-Male to RP-SMA Cable from Teradek features an N-type male connector on one end and an RP-SMA connector on the other. Use this cable to connect a Bolt or Beam transmitter or receiver to a Panel Antenna array.
Délai habituel entre 2 et 6 semaines
Blue Identification Plate for Bolt 1000/3000 Transmitter
Délai habituel entre 2 et 6 semaines
Blue Identification Plate for Bolt 1000/3000 Receiver
Délai habituel entre 2 et 6 semaines
Green Identification Plate for Bolt 1000/3000 Transmitter
Délai habituel entre 2 et 6 semaines
Red Identification Plate for Bolt 1000/3000 Receiver
Délai habituel entre 2 et 6 semaines
Red Identification Plate for Bolt 1000/3000 Transmitter
Délai habituel entre 2 et 6 semaines
Yellow Identification Plate for Bolt 1000/3000 Receiver
Délai habituel entre 2 et 6 semaines
Yellow Identification Plate for Bolt 1000/3000 Transmitter
Délai habituel entre 2 et 6 semaines
Replacement Wireless Antenna for Bolt 3000 RX
Délai habituel entre 2 et 6 semaines
This is a single cable that connects to one of the RP-SMA connectors on your TX or RX unit, and the other end connects to one of the panel connectors.
Délai habituel entre 2 et 6 semaines
When you're on a busy set and need to change settings for a Bolt 6 XT wireless setup for your monitors, it may get confusing which one is which when there are so many wireless setups.
Délai habituel entre 2 et 6 semaines
This flexible yellow silicone band wraps around the Bolt 6 XT transmitter and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
This flexible yellow silicone band wraps around the Bolt 6 XT transmitter and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
Teradek has devised a clever way of identifying your synced transmitter and receiver set with this blue Color Band to wrap around your transmitter to match its partner on the other end.
Délai habituel entre 2 et 6 semaines
This flexible red silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
This flexible yellow silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
This flexible green silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
This flexible blue silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines
This flexible red silicone band wraps around the Bolt 6 LT transmitter and allows you to see the color of the unit and find its paired device.
Délai habituel entre 2 et 6 semaines