Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Stereo Cyclone Ambisonic 1
1 pièce (s) en stock
Windscreenkorb to MKH 8070
1 pièce (s) en stock
The Blimp Windshield and Rycote Shock Mount Suspension System from Rode is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2 and NTG3 and any shotgun mic up to 12.75" in length.
2 pièce (s) en stock
10cm Medium Hole
4 pièce (s) en stock
5cm Super-Softie (24/25)
4 pièce (s) en stock
Fuzzy Slip-on Windscreen. XL - Interior length 10" (25cm)
1 pièce (s) en stock
Fuzzy Slip-on Windscreen. L - Interior length 7.5" (19cm)
2 pièce (s) en stock
Special Nagra Ares M / Zoom H4 Mini Windjammer
3 pièce (s) en stock
Medium. Max diameter 3cm, Max length 3cm
6 pièce (s) en stock
Black Lavaliere Windjammers
14 pièce (s) en stock
Grey Lavaliere Windjammers
7 pièce (s) en stock
White Lavaliere Windjammers
6 pièce (s) en stock
For outside broadcasting - a combined foam windshield and hairy cover that reduces wind noise most effectively
6 pièce (s) en stock
Zoom H4N - Mini Windjammer
3 pièce (s) en stock
The Rode WS6 Deluxe Windshield provides excellent noise protection against high wind and adverse weather conditions. The slip-on design of the WS6 features dimensions that accommodate the Rode NTG2 and NTG1 microphones - as well as any shotgun or stereo mic with a length of 6.25" (160.5mm) and diameter of 0.88" (22.5mm).
19 pièce (s) en stock
The Rode DeadCat VMP Wind Muff for VideoMic Pro+ is an artificial fur wind cover for the Rode VideoMic Pro+. The windshield is designed to minimize any wind noise when recording in high wind conditions while remaining acoustically transparent and accurate.
6 pièce (s) en stock
Pack of 100 White Undercovers (incl 100 x Stickies), 100 uses
9 pièce (s) en stock
Pack of 100 Grey Undercovers (incl 100 x Stickies), 100 uses
3 pièce (s) en stock
The Rode Dead Cat Wind Muff is a zip-on furry cover with deep artificial fur that fits snugly over the Rode VideoMic or the NTG-1 and NTG-2 microphones. The Wind Muff greatly reduces wind noise when recording in windy conditions.
5 pièce (s) en stock
Extension Handle
10 pièce (s) en stock
Short Hot Shoe Extension - 10cm
1 pièce (s) en stock
The Rode DeadCat VMP Wind Muff for VideoMic Pro is an artificial fur wind cover for the Rode VideoMic Pro. The windshield is designed to minimize any wind noise when recording in high wind conditions while remaining acoustically transparent and accurate.
7 pièce (s) en stock
Artificial Fur Wind Shield for VideoMic Pro R
1 pièce (s) en stock
Single White Lavalier Windjammer
8 pièce (s) en stock
Fuzzy Slip-on Windscreen. M - Interior length 6" (15cm)
2 pièce (s) en stock
PW Professional Windscreen (Black - Beige White)
6 pièce (s) en stock
The Rode Dead Kitten is designed for use with the Rode Stereo VideoMic, Rode Stereo VideoMic Pro, Rode WS4 and Rode NT4 microphone. It's specially designed with artificial fur that minimizes wind noise, while also remaining acoustically transparent.
4 pièce (s) en stock
Deluxe windscreen for VideoMic GO II
5 pièce (s) en stock
Foam Windshield for ME 64
2 pièce (s) en stock
Foam Windscreen for Sennheiser handheld wireless transmitters, SKM100, 300 and 500.
6 pièce (s) en stock
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 400 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 400 shotgun microphone.
4 pièce (s) en stock
Grey Undercover Pack, 30 uses
33 pièce (s) en stock
The Rode MINIFUR-LAV Synthetic Fur Windshield is a package of 3 windshields for Rode lavalier microphones. The MINIFUR-LAV effectively minimizes high wind noise while keeping the microphone acoustically transparent.
5 pièce (s) en stock
Rode WS2 Windscreen is built to fit NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Microphones. Properly equip your microphone with the WS2 to avoid wind noise and pop.
9 pièce (s) en stock
The Rode WS-LAV Pop Filter is a package of 3 pop-filter windscreens for Rode lavalier microphones. The WS-LAV effectively minimizes popping and sibilance noise while keeping the microphone acoustically transparent (black).
1 pièce (s) en stock
Black Undercover Pack, 30 uses
14 pièce (s) en stock
White Undercover Pack, 30 uses
4 pièce (s) en stock
Stickie Replacement Pack, 30 uses
3 pièce (s) en stock
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
3 pièce (s) en stock
When recording outdoors, be sure to use Rode's WSVM Shotgun Wind Screen to shield the recording from noise created by wind. The WSVM is designed to fit Rode's NTG-1 and NTG-2 directional condenser microphones, and the VideoMic shotgun microphone.
1 pièce (s) en stock
Rode WS4 Windscreen is built to fit the NT4 microphone. Properly equip your microphone with the WS4 to avoid wind noise and pop.
9 pièce (s) en stock
Windshield for Lavalier Mic
28 pièce (s) en stock
Fur Windscreen
4 pièce (s) en stock
The Rycote Stereo Cyclone DMS Kit 5 (for Use without Mic Preamps) is a windshield system designed for location sound mixers and recordists using a stereo, double-mid-side (DMS) microphone array in broadcast TV, film, video, and game audio production.
Délai habituel entre 4 et 5 semaines
Stereo Cyclone DMS Kit 1
Délai habituel entre 4 et 5 semaines
The Rycote Stereo Cyclone MS Kit 17 (for Use without Mic Preamps) is a windshield system designed for location sound mixers and recordists using a stereo, mid-side microphone array in broadcast TV, film, video, and game audio production.
Délai habituel entre 4 et 5 semaines
Stereo Cyclone Ambisonic 2
Délai habituel entre 4 et 5 semaines
The Rycote Stereo Cyclone MS Kit 18 (for Use with Mic Preamps) is a windshield system designed for location sound mixers and recordists using a stereo, mid-side microphone array in broadcast TV, film, video, and game audio production.
Délai habituel entre 4 et 5 semaines
Stereo Windshield WS AE ORTF Kit (MZL)
Délai habituel entre 4 et 5 semaines
Modular Windshield WS 1 Kit (MZL)
Délai habituel entre 4 et 5 semaines
Full Windshield 8 Kit - (Large Modular Suspension, Windshield 4 and Windjammer 8, Extension 4)
Délai habituel entre 4 et 5 semaines
Modular Windshield WS 8J Kit
Délai habituel entre 4 et 5 semaines
Modular Windshield WS 4 Kit (XLR-5F)
Délai habituel entre 4 et 5 semaines
Full Windshield 6 Kit - (Small Modular Suspension, Windshield 4 and Windjammer 6, Extension 2)
Délai habituel entre 4 et 5 semaines
Modular Mono Windshield MWS 9 Kit (MZL)
Délai habituel entre 4 et 5 semaines
Cyclone Windshield Kit, Medium
Délai habituel entre 4 et 5 semaines
Cyclone Windshield Kit, Large
Délai habituel entre 4 et 5 semaines
Cyclone Windshield Kit, Small (XLR)
Délai habituel entre 4 et 5 semaines
Stereo Cyclone Single Mic 1
Délai habituel entre 4 et 5 semaines
Full Windshield 295 Kit, Medium Modular Suspension
Délai habituel entre 4 et 5 semaines
Full Windshield 4 Kit - (Medium Modular 4) Suspension, Windshield 4 and Windjammer
Délai habituel entre 4 et 5 semaines
Full Windshield 2 Kit - (Small Modular 2) Suspension, Windshield 2 and Windjammer
Délai habituel entre 4 et 5 semaines
Full Windshield 10 Kit - (Special Kit for Sennheiser MKH 8000)
Délai habituel entre 4 et 5 semaines
Full Windshield 3 Kit - (Small Modular 3) Suspension, Windshield 3 and Windjammer
Délai habituel entre 4 et 5 semaines
Full Windshield 1 Kit - (Small Modular 1) Suspension, Windshield 1 and Windjammer
Délai habituel entre 4 et 5 semaines
Mono Extended Ball Gag Kit - (Suspension,Windshield and Drawstring Windjammer)
Délai habituel entre 4 et 5 semaines
Stereo Windshield WS AE ORTF Kit
Délai habituel entre 4 et 5 semaines
This Windshield Kit from Rycote is intended for use with the Sennheiser MKH416 and other select shotgun microphones.
Délai habituel entre 4 et 5 semaines
Windshield Kit, MiniCMIT
Délai habituel entre 4 et 5 semaines
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
The medium Super-Shield Kit for Shotgun Mics from Rycote is a complete windshield and shock mounting system for shotgun microphones 20-25cm in length.
Délai habituel entre 4 et 5 semaines
The small Super-Shield Kit for Shotgun Mics from Rycote is a complete windshield and shock mounting system for shotgun microphones up to 20cm in length.
Délai habituel entre 4 et 5 semaines
The large Super-Shield Kit for Shotgun Mics from Rycote is a complete windshield and shock mounting system for shotgun microphones 25-30cm in length.
Délai habituel entre 4 et 5 semaines
The Super-Blimp NTG from Rycote is a complete windshield and shock-mounting system for the Rode NTG series and similar shotgun microphones.
Délai habituel entre 4 et 5 semaines
The Rycote Super-Blimp NTG5 is a complete windshield and shockmount system for the Rode NTG5 shotgun microphone. The kit provides patented Lyre technology and a two-part windshield basket to guard against shocks, vibrations, and wind noise-all with acoustic transparency.
Délai habituel entre 4 et 5 semaines
Windscreen
Windscreen
25 x Overcover Packs, 30 uses (re-useable fur covers)
Délai habituel entre 4 et 5 semaines
This lightweight, rugged protective basket windshield provides excellent suppression of wind noise when used for outdoor applications.
Accessories Kit for ECM-88, 2x mic holder (Doublel-Pin and Clip) 6x wind screen (red, yellow, blue, green, gray, black)
Used in conjunction with the MZW 70-1, this 'hairy' cover made from long-haired polyester fleece provides maximum protection against wind noise.
25 x Undercover Packs, 30 uses
Délai habituel entre 4 et 5 semaines
Used in conjunction with the MZW 80-1, this 'hairy' cover made from long-haired polyester fleece provides maximum protection against wind noise.
12x wind screen for ECM-88, 2x red, 2x yellow, 2x blue, 2x green, 2x gray, 2x black
Accessories Kit for ECM-77, 2x mic holder (Doublel-Pin and Clip) 6x wind screen (red, yellow, blue, green, gray, black)
12x wind screen for ECM-88B - black urethane
14cm Medium Hole
Délai habituel entre 4 et 5 semaines
Used in conjunction with the MZW 60-1, this 'hairy' cover made from long-haired polyester fleece provides maximum protection against wind noise.
Used in conjunction with the MZW 20-1, this 'hairy' cover made from long-haired polyester fleece provides maximum protection against wind noise.
15cm Classic-Softie Camera Kit (19/22)
Délai habituel entre 4 et 5 semaines
The Rycote Windjammer 295 is a synthetic fur cover that offer approximately 12dB of wind-noise reduction over a standard windshield.
Délai habituel entre 4 et 5 semaines
18cm Medium Hole
Délai habituel entre 4 et 5 semaines
This Rycote Super-Softie Kit 416 Windshield & Universal Shotgun Mount Kit is designed to work with Sennheiser MKH416 microphones, Neumann KMR 81i mics, and more.
Délai habituel entre 4 et 5 semaines
Audio Kit (HD) - Zoom H6
Délai habituel entre 4 et 5 semaines
The Rycote Windjammer 4 is a synthetic fur cover that offer approximately 12dB of wind-noise reduction over a standard windshield.
Délai habituel entre 4 et 5 semaines
25 x Stickie Replacement Packs, 30 uses
Délai habituel entre 4 et 5 semaines
MKH816 early style Rycote housing pre March 2004
MKH816 Sennheisers MZW Housing
MKH816 Sennheisers MZW Housing
MKH816 early style Rycote housing pre March 2004
Designed For Ecm-77 Series Lavalier Microphones. Balck Colour, 12 Pieces Are Included.
MKH416 early style Rycote housing pre March 2004
MKH416 early style Rycote housing pre March 2004
MKH60 early style Rycote housing pre March 2004
MKH60 early style Rycote housing pre March 2004
Rycotes new WS4&Sennheisers MZW-60/1
Rycotes new WS4&Sennheisers MZW-60/1
Windscreen
This Rycote Classic-Softie and Universal Shotgun Mount Kit is an all-in-one wind-reduction and mounting solution for Rode NTG Series shotgun microphones and similar mics.
Délai habituel entre 4 et 5 semaines
15cm Super-Softie (19/22)
Délai habituel entre 4 et 5 semaines
18cm Super-Softie (19/22)
Délai habituel entre 4 et 5 semaines
12cm Super-Softie (19/22)
Délai habituel entre 4 et 5 semaines
Audio Kit - ZOOM H5
Délai habituel entre 4 et 5 semaines
Audio Kit - Zoom H4N
Délai habituel entre 4 et 5 semaines
The BBG Windshield is a low-profile ball-type wind diffuser for cylindrical microphones. The BBG Windshield is made of the same materials as the standard windshield and is fitted with a grommet that grips the microphone body.
Délai habituel entre 4 et 5 semaines
The Baby Ball Gag Windshield is a low-profile ball type wind diffuser for cylindrical microphones.
Délai habituel entre 4 et 5 semaines
The Baby Ball Gag Windshield is a low-profile ball type wind diffuser for cylindrical microphones.
Délai habituel entre 4 et 5 semaines
The Baby Ball Gag Windshield is a low-profile ball type wind diffuser for cylindrical microphones.
Délai habituel entre 4 et 5 semaines
Special corrugated foam rain protector for Modular and S-series windshields. Enables the rain to noiselessly trickel out
Délai habituel entre 4 et 5 semaines
Suit MKH60 etc.
Suit 416 etc.
Suit Sanken CS1 etc.
Suit Betacam mic etc.
Suit Voice Technologies VT5000
Short Mics (CMC etc.)
5cm Super-Softie (19/22)
Délai habituel entre 4 et 5 semaines
Pack Of Six Black, Metal Wind Shields For The Ecm-77 Microphone.
12x wind screen for ECM-77, 2x red, 2x yellow, 2x blue, 2x green, 2x gray, 2x black
Studio Kit, includes Pop Filter and USM-L
Délai habituel entre 4 et 5 semaines
12x wind screen for ECM-44B - Black Urethane
12x wind screen for ECM-66B - black urethane
12cm Medium Hole
Délai habituel entre 4 et 5 semaines
18cm Medium Hole
Délai habituel entre 4 et 5 semaines
14cm Medium Hole
Délai habituel entre 4 et 5 semaines
The DPA WJ5100 Windjammer is intended for use with the DPA 5100 Mobile Surround Microphone.
Windscreen
Medium Hole Mount w/Pistol Grip Handle
Délai habituel entre 4 et 5 semaines
Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective. This softie features a standard size hole and measures 5cm in length. The softie will fit microphones with diameters from 19-22mm.
Délai habituel entre 4 et 5 semaines
The black Neumann WS 49 is an acoustically transparent foam windscreen for the M 49 V large-diaphragm tube microphone.
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
816 Rycote Housing
MZW Housing
120mm foam. Handycam, eg: Sony PD Range
130mm foam. Eg: Broadcast sized cameras etc.
160mm foam. mid size, mics eg PSC SGM1 & Sanken CS1
190mm foam. Eg: MKH416, MKH60 etc.
Sony HDR-FX1, onboard mic (fits directly over built in mic)
Panasonic HVX & DVX models
Suits all hand held mics eg RE50, SM58 &
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Windscreen for ME34/35
Windscreen for ME36
This Rycote Windjammer is sized for use with the Baby Ball Gag Windshield. The Windjammer further minimizes noise due to excessive wind.
Délai habituel entre 4 et 5 semaines
Sun Hat - XXXL
416 Rycote Housing
MKH60 Rycote Housing
WS4 Rycote Housing
Sun Hat - M
Sun Hat - L
Sun Hat - XL
Sun Hat - XXL
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
The Long Shotgun Blimp Extension Kit from Rode is an add-on component kit for the Rode Blimp Windshield System that allows the use of long shotgun microphones, including the Rode NTG8 and any shotgun with a barrel length of up to 23.62 (600mm).
18cm SGM Foam & Windjammer (19/22)
Délai habituel entre 4 et 5 semaines
23-25mm Mic Diamter, slot lengh:100mm, for short fat, digitop mics
18-22mm Mic Diamter, slot lengh:125mm, for NTG1&2,CS1 etc.
18-22mm Mic Diamter, slot lengh:180mm, for 416, CS3 etc.
23-25mm Mic Diamter, slot lengh:180mm, for MKH60 etc.
18-22mm Mic Diamter, slot lengh:45mm, for very short, Schoeps etc.
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Windscreen
Windshield Rain Jacket, Medium
Délai habituel entre 4 et 5 semaines
Windscreen
Special 130. Max diameter 5cm, Max length 13cm
Délai habituel entre 4 et 5 semaines
Special 90. Max diameter 5cm, Max length 9cm
Délai habituel entre 4 et 5 semaines
Special 155. Max diameter 5cm, Max length 15.5cm
Délai habituel entre 4 et 5 semaines
Special 80 X 60 Mini Windjammer
Délai habituel entre 4 et 5 semaines
Black Ristretto Lavalier Windjammer - pair
Délai habituel entre 4 et 5 semaines
White Ristretto Lavalier Windjammer - pair
Délai habituel entre 4 et 5 semaines
Green Lavalier Windjammer - pair
Délai habituel entre 4 et 5 semaines
Red Lavalier Windjammer - pair
Délai habituel entre 4 et 5 semaines
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam
Yellowtec Windscreen for iXm black
Windscreen for MD 431, anthracite
Windscreen
Windscreen
The MZH 440 from Sennheiser is a fur windshield for the MKE 440 stereo shotgun microphone (sold separately). It is offered as an optional accessory and is designed to protect against low wind or turbulence when capturing audio in outdoor applications.
integrated mics on handy-cams
The Rode WS7 Deluxe Windshield provides excellent noise protection against high wind and adverse weather conditions. The slip-on design of the WS7 features dimensions that accommodate the Rode NTG2 and NTG1 microphones - as well as any shotgun or stereo mic with a length of 7.25" (186.5mm) and diameter of 0.78" (20mm).
This Rode DeadWombat Windshield is a windshield for the Rode Blimp windshield shock mounting system. The DeadWombat effectively minimizes high wind noise while keeping the microphone acoustically transparent.
10cm SGM Foam Windjammer
Délai habituel entre 4 et 5 semaines
Mini Winjammer for DPA 4099
Délai habituel entre 4 et 5 semaines
Zoom H5 Mini Windjammer
Délai habituel entre 4 et 5 semaines
The black Foam Replacement Windshield for d:facto Microphones is a foam windscreen designed to protect the mic from moisture & dirt.
DPA's DUA0040 Small Windscreen for 1" (24mm) Microphones is made of top quality, expanded foam which ensures the windscreen will not attenuate higher frequencies more than the tolerance field of the microphone frequency response.
The 5-pack of Foam Windscreens for d:vote Core 4099 from DPA are designed of a high-quality acoustic foam. They can be used to reduce vocal plosives, wind noise, and protect the microphone from moisture and dirt.
The DPA Microphones DUA0577 Windscreens are sold in a set of 5, and are intended for use with the DPA 4080 miniature headworn and lavalier microphone.
The DPA Microphones DUA0577 Windscreens are sold in a set of 5, and are intended for use with the DPA 4088 miniature headworn and lavalier microphone.
The DUA4099 Foam Windscreen from DPA Microphones is appropriate for the 4099 Instrument Mic.
Canon XF 300/305 Mini Windjammer
Délai habituel entre 4 et 5 semaines
Windscreen for MD 421,anthracite
Windscreen for MD441, anthracite
for most mini/lavalier mics and headset mounted mics
for most mini/lavalier mics and headset mounted mics
for most mini/lavalier mics and headset mounted mics
for most mini/lavalier mics and headset mounted mics
The Rode WS11 is a windshield intended for use with the VideoMic NTG. It is sized specifically to fit the VideoMic NTG, and it reduces wind noise and plosives when slipped over the microphone.
The 5-pack of beige Subminiature Foam Windscreens from DPA are designed with high-quality acoustic foam and fit all DPA subminiature lavalier and headset microphones, including the 6060, 6061, and 6066 models.
Foam Windscreens for d:screet Microphones and for cylindrical-head d:fine Headset Microphones.
Foam windshield for d: fine Slim and d: screet Slim (4160) microphones.
Foam windshield for d: fine Slim and d: screet Slim (4160) microphones.
Foam windshield for d: fine Slim and d: screet Slim (4160) microphones.
The DUA0041 from DPA is a foam windscreen for d:dicate microphones with an active cable. It can be used to provide protection against wind and pop noises without attenuating the higher frequencies beyond the tolerance field of the microphone's frequency response.
The DUA0073 Windscreen for 4017 Shotgun Microphone from DPA Microphones is suited for outdoor applications to protect the microphone from wind and for close distance speech recording.
For M59/69/88, Opus29/39/59/69/81, TGX60/61/80/81, black
The windscreen is made of foam. The size and construction of the foam ensures that the windscreen does not attenuate the higher frequencies more than the tolerance field of the microphone frequency response and simultaneously it provides excellent protection from wind and pop noises.
The Windscreen for 2011C Microphone from DPA Microphones is intended for use with the DPA 2011C compact cardioid microphone to reduce noise and plosives when in use for outdoor, speech, and up close singing applications.
Foam Windscreens for d:screet Microphones and for cylindrical-head d:fine Headset Microphones.
DPA's DUA0020 Small Windscreen for 19 mm Microphones is made of top quality foam which ensures the windscreen will not attenuate higher frequencies more than the tolerance field of the microphone frequency response. This windscreen also provides excellent protection from wind and pop-noises.
The 5-pack of black Subminiature Foam Windscreens from DPA are designed with high-quality acoustic foam and fit all DPA subminiature lavalier and headset microphones, including the 6060, 6061, and 6066 models.
The DUA0570 Foam Windscreen for DPA Microphones 4060, 4061, 4062, 4063, 4071 series - 7-Pack (Color Mix) reduces speaking and environmental noise for the DPA Microphones 4060, 4061, 4062, 4063, 4071 series miniature omnidirectional microphones.
Compatible with a the short S-Mic 2S and S-Mic 3S, this W02 Deluxe Windshield from Deity Microphones ensures your audio is protected from wind distortion. The furry windscreen features an internal rubber gasket to prevent it from slipping off your microphone. It can withstand wind speeds up to 9.3 mph.
Compatible with a wide range of shotgun microphones, including the S-Mic 2 and S-Mic 3, this W01 Deluxe Windshield from Deity Microphones ensures your audio is protected from wind distortion. The furry windscreen features an internal rubber gasket to prevent it from slipping off your microphone.
Windscreen to MK4
WS400/700 Windscreen VT401HS/401/VT700, Black WS400/700B - beige WS400/700H
Délai de livraison habituel 4 semaines
Windscreen charcoal grey for OPUS83 - MC910/930/950 - M101/201/422 - MCE84/93/94
Single Black Lavalier Windjammer
Délai habituel entre 4 et 5 semaines
Pack of 100 Stickies, 100 uses
Délai habituel entre 4 et 5 semaines
Single Grey Lavalier Windjammer
Délai habituel entre 4 et 5 semaines
18 cm Large Hole Foam
Délai habituel entre 4 et 5 semaines
Lavalier Foams (BLACK)
Délai habituel entre 4 et 5 semaines
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
Designed to offer discreet protection for your mic, the WS14 looks great on camera for streams, while simultaneously maintaining its shape and providing potent protection with high-density foam and rib supports.
The Sennheiser MZW 8030 Foam Windshield is designed to fit the MKH 8030 figure-8 compact microphone. The windscreen protects against noise caused by light wind.
Protect your EleMent Series Microphone with the PF-100 Pop Screen from Mackie. This pop filter is sized specifically for EleMent Series microphones, which is good, because it attaches directly to the capsule by means of included elastic bands. Once affixed to the mic, it helps reduce low-frequency pops and thumps, filtering them out of your voice for the...
Délai habituel entre 2 et 3 semaines
The WS8 Deluxe Windshield from Rode Microphone is an easy-to-use high-performance windshield for microphones of 0.79 (20mm) diameter and 1.06 (27mm) capsule depth. It is designed for use with the NT5, NT55, and NT6 small diaphragm condenser microphones.
Ceiling mount black
Ceiling mount white
WS100/8 Special Windscreen with rubber, Black
Délai de livraison habituel 4 semaines
The DUA0573 Windscreen from DPA Microphones is designed for use with 4090 / 4091 Omni Microphones. It is well suited for outdoor applications and for speech and singing at close distances.
DPA's UA0896 Windscreen for 0.75" (19mm) Microphones works well indoors and outdoors but is best suited for vocal performances from short distances.
Foam windshield for 4003/4006
Deluxe Wind Shield for Videomicro, Videomic Me, Blue
WS-Chroma is a set of two foam windshields for the VideoMic NTG coloured blue and green, making them suitable for chroma keying.
Deluxe windscreen for Videomicro, Videomic Me, pink
Deluxe Wind Shield for Videomicro, Videomic Me, Orange
Deluxe Wind Shield for Videomicro, Videomic Me, Green
Windscreen
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 200 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 200 shotgun microphone.
Windscreen for MKE 600, anthracite
Deluxe Wind Shield for Video Micro, Videomic ME
A set of 3 extra windjammers in black for the Tentacle Lavalier Microphone.
Délai habituel entre 4 et 6 semaines
Miniature Windscreen for VT403/403WA White
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT DUPLEX-VOCAL Beige
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT401 Beige
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT401
Délai de livraison habituel 4 semaines
Miniature Windscreen for VT701/VT901 Beige
Délai de livraison habituel 4 semaines
Foam Windshield/Windscreen for Opus 62, Opus 67, Opus 82, Opus 86, Opus 87, Opus 88, DT 280, DT 287, DT 290 and DT 297 - Charcoal Grey
For MCE530, Opus 53, M424, MC930, black
Micro Windjammer - 30 uses
Délai habituel entre 4 et 5 semaines
White Overcovers: 30 x Stickies & 6 White Fur Discs
Délai habituel entre 4 et 5 semaines
Overcover Pack, 30 uses (re-useable fur covers)
Délai habituel entre 4 et 5 semaines
The Rode WS-HS1-P Pop Filter is a foam windscreen for suppressing popping and wind noise on the Rode HS1 microphone. It is supplied in packs of 3.
Undercover Pack, 30 uses
Délai habituel entre 4 et 5 semaines
Protect your microphone from wind noise and the elements with the Rycote FWS-40/55 Reporter Mic Foam.
Délai habituel entre 4 et 5 semaines
Rode WS3 Windscreen is built to fit the NT3 microphone. Properly equip your microphone with the WS3 to avoid wind noise and pop.
Rode WS5 Windscreen is built to fit the NT5 and NT6 microphones. Properly equip your microphone with the WS5 to avoid wind noise and pop.
SmallRig Windshield with Cold Shoe Adapter for Nikon Z 30 3859 is designed to eliminate wind noise for better sound quality in outdoor scenes thanks to the selected artificial wool and thick linings.
Délai habituel entre 4 et 5 semaines
Standard Windscreen for VT500/506 Series
Délai de livraison habituel 4 semaines
Protective grilles for MCE10, black
Windscreen foam ME 36
Windscreen for VT DUPLEX-CARDIOID
Délai de livraison habituel 4 semaines
Wind- and pop screen for BKE 4-4
Windscreen large for HME 26
HMD 46/ HME 27 - Windscreen
Windshield Accessory for Headmic 4 in Beige
Windshield Accessory for Headmic 4 in Black
Foam Windscreen for H1, H1n, H1n-VP
The black Sennheiser Profile Wireless Replacement Windscreen for Charging Bar is a windscreen designed to work with the charging bar when you're using it in conjunction with one or two of the clip-on transmitters as a handheld or desktop microphone/transmitter.
HMD 26 Small Foam mic Windscreen
WS800 Windscreen WS800B Black or WS800H Beige
Délai de livraison habituel 4 semaines
W720 Windscreen to VT720W
Délai de livraison habituel 4 semaines
Windscreen for VT910
Délai de livraison habituel 4 semaines
The black Sennheiser Profile Wireless Replacement Windscreen for Clip-On Transmitter is a replacement furry windscreen designed for use with the transmitter/mic/recorder.
Windscreen for VT701/VT901
Délai de livraison habituel 4 semaines
Windproof microphone covers help reduce wind noise and improve audio quality when calling in windy conditions.