Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
EVF Tilt Adapter Swiss warranty. A unique tool to expand the usability of the FUJIFILM GFX 50S's removable electronic viewfinder, the EVF-TL1 EVF Tilt Adapter permits adjusting the angle at which the EVF is attached to the camera body.
2 pièce (s) en stock
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfinder brackets and is the most flexible and comfortable method to attach a viewfinder to a camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb screw and freely repositioning the viewfinder, which will remain in place thanks to double...
Attaches MVF-1 viewfinder to ALEXA Mini via 15mm LWS rods and viewfinder mount. Requires MAP-2 for 15mm rod support.
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
FF Heavy OLPF (OLPF-FF3)
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Viewfinder bracket universal
This viewfinder bracket is designed for the Arri viewfinders
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
Viewfinder bracket with rosette
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
FF Light OLPF (OLPF-FF1)
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Mounting bracket for EVF (V)
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
This viewfinder bracket is designed for the Arri viewfinders
Viewfinder bracket for Sony PXW-FS7
Magnify your viewfinder's center image area by 2x with Nikon DG-2 Eyepiece Magnifier, which flips up to quickly view the entire image area when needed.
The SAS-2 is a modernization of the original SAS-1 that can be attached pointing rearward at the front of the handle CCH-5, optimizing space with short lenses set-ups.
The Mini Mount for EAGLE SDI e-Viewfinder from Kinefinity mounts easily on your camera using a standard 1/4"-20 screw. This aluminum alloy support attaches to the EAGLE EVF via its quick-lock system. It features 360° rotation for optimal viewing and a red, knurled thumbscrew.
SDI e-Viewfinder Cord (RS, 70cm)
Viewfinder Adapter VFA-3
Connect your Eagle SDI e-Viewfinder to your SDI camera with this Power, Run/Stop & BNC Cable from Kinefinity. The cable is designed to connect both SDI video output from your camera to the viewfinder as well as power and run/stop triggering.
Single sided 15 mm NATO rail long; length: 170 mm
The 27.6" D-Tap Cable for EAGLE SDI e-Viewfinder from Kinefinity combines two cables in one with a sheath that binds them neatly together.
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
The 15.7" D-Tap Cable for EAGLE SDI e-Viewfinder from Kinefinity combines two cables in one with a sheath that binds them neatly together.
Separate 15 mm viewfinder adapter for top handgrip
Viewfinder extender
HDMI e-Viewfinder Cord (D-Tap, 50cm)
U/F6 Focusing Screen
M/F6 Focusing Screen
J/F6 Focusing Screen
L/F6 Focusing Screen
?h? N?k?n ? ???? F??u??ng ??r??n ?? th? ?t?nd?rd f??u??ng ??r??n ?u??l??d f?r ?ll N?k?n ?F ?LR ??m?r??. ?h?? ??rt??ul?r ??r??n ?? t? f?t th? N?k?n D3 D?LR. ?h? ???? ? F??u??ng ??r??n ?? ?n ?nt?r?h?ng??bl? f??u??ng ??r??n th?t ?ff?r? un?b?tru?t?d v??w?ng ?nd ???? f??u??ng ?v?r th? ?nt?r? m?tt? ?urf???. ?h?? ??r??n ?? ?d??l f?r g?n?r?l ?h?t?gr??h?.
E/F6 Focusing Screen
The ZMU-4 ARRI Rosette can be mounted as a second rosette on the ZMU-4. This second rosette is already premounted on the ZMU-4 when ordering KK.0043770 ZMU-4 Basic Set.
The Nikon DK-17A Anti-Fog Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece includes a fog-resistant optical element and provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
The Nikon DK-17 Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
The Nikon DK-17F Fluorine-Coated Finder Eyepiece is a replacement eyepiece for select Nikon DSLR cameras. This eyepiece features fluorine coated glass and soft durable rubber and is safe for eyeglass users.
The Nikon DK-27 Eyepiece Adapter for D5 DSLR is a replacement eyepiece for the Nikon D5 DSLR camera. The eyepiece provides a comfortable frame with which to utilize the camera's viewfinder.
Dedicated to the Nikon Z9 and Z8 mirrorless cameras, the DK-33 Rubber Eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
Bracket Adapter
Accsoon Toprig Battery Plate
Use this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.
This Viewfinder Eyecup from SmallRig features a soft, silicone design to ensure comfort, reduce eye fatigue, and keep sunlight from entering your viewfinder. It's compatible with the eyepiece of the Sony a7C II and a7CR mirrorless cameras.
Délai habituel entre 4 et 5 semaines
DK-30 Rubber Eyecup
Eyepiece shield made from comfortable soft rubber. Minimises the amount of stray light that enters the viewfinder.
The DK-32 Rubber Eyecup is dedicated for the Nikon Zfc mirrorless camera and aids in the comfortable viewing through the camera's viewfinder.
Dedicated to the Nikon Z 7 and Z 6 mirrorless cameras, the DK-29 Rubber Eyecup is a spare or replacement item for the one originally included with the camera. This eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
The Nikon DK-28 Rubber Eyecup, which improves viewing comfort when the camera is against your face, fits right onto the viewfinder of the Nikon D7500. The eyecup also blocks stray light from entering the viewfinder and creating glare, which prevents you from seeing the image clearly.
The Nikon DK-19 Rubber Eyecup allows for more comfortable viewing through the camera's viewfinder, especially for eyeglass wearers. Less stray light enters the viewfinder and a less flared, clearer image with which to compose your shot is provided.
E-Viewfinder Rosette (1/4"-20)
E-Viewfinder Rosette (M6)
NATO Rail
Eye Cup XT
Eye Cup XT
The Nikon DK-9 Rubber Eyecup fits Nikon N80 SLR cameras, easily mounting to the viewfinder; it provides a comfortable surface for the area around your eye, preventing scratches or damage to your eyeglasses.
HDMI e-Viewfinder Cord (Type-C, 50cm)
Round Eyecup for GFX 50S, X-T2, and X-T1
Long Eyecup
The Nikon DK-16 Rubber Eyecup for Select Nikon Cameras is a viewfinder frame for select Nikon DSLR and SLR cameras. This eyecup is intended to prevent stray light, which could make focusing and composing an image difficult, from coming in between a compatible camera's viewfinder and the eye it is held up to.
The Nikon DK-22 Eyepiece Adapter allows the use of eyepiece accessories made for other cameras that feature the round eyepiece.
The Nikon DK-25 Rubber Eyecup is a replacement for the eyecup included with the D5300 DSLR camera. It allows for more comfortable viewing through the camera's viewfinder. It also decreases the amount of stray light that can enter the viewfinder and cause flare.
HDMI e-Viewfinder Cord (Type-C, 25cm)
KineEVF Eyecushion
E-Viewfinder Eyecup
The DK-26 Eyepiece Cap from Nikon is compatible with the Nikon Df DSLR Camera. It is designed to cover the viewfinder window to keep stray light from entering the viewfinder and causing flare that negatively affects your exposures.
The DK-5 Eyepiece Cap from Nikon protects select camera's viewfinders from dust and moisture when not in use. It is also useful when using the self-timer or remote release functions in conjunction with long exposures, in order to prevent light from entering the viewfinder and affecting auto-exposure results.
USB-C Cable (C2C, 25cm)