Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Mk2 Sync E Timecode Generator with Bluetooth (Dual Set)
3 pièce (s) en stock
Mini Converter Sync Generator includes 6 crystal stabilized video reference outputs for referencing all the video equipment in your studio in either high definition Tri-Sync or standard definition Black Burst television standards.
3 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to Micro 3-Pin LEMO Cable, For Audio Limited A10-TX transmitter , Zaxcom ZFR 400, Length 40 cm /16 inches
1 pièce (s) en stock
3.5 mm Jack Plug (Neutrik) to 4-Pin LEMO, 40mm/16 inches e.g. RED Raven, Epic, Scarlet, Weapon (not RED One)
3 pièce (s) en stock
3.5 mm Jack Plug (Neutrik) to 5-Pin LEMO, 35mm/14 inches e.g. ARRI Alexa, Sound Devices, Ambient TCGs
10 pièce (s) en stock
5-Pin LEMO to 3.5 mm Jack plug (Neutrik), 35mm/14inches e.g. ARRI Alexa, Sound Devices, Ambient TCGs
13 pièce (s) en stock
2 x 3.5 mm Jack Plugs 90° (Neutrik) + HICON 3.5 mm Mini Jack Metal Connector, Tentacle to Cameras with Mini Jack Input and Use an Additional External Microphone. Length 20 cm/8 inches
3 pièce (s) en stock
2 x 3.5mm Jack Plugs 90° (Neutrik) + HICON 3.5mm Mini Jack Metal Connector,Tentacle to Cameras with Mini Jack Input and use an Additional External Microphone. 20cm/8 inches
10 pièce (s) en stock
Cable to feed timecode from Tentacle SYNC E or ORIGINAL to devices with a DIN 1.0/2.3 input like the Canon EOS R5C.
10 pièce (s) en stock
3.5 mm Jack Plug (Neutrik) to XLR Male, 30cm/12 inches e.g. Audio Timecode, Tascam HD-P2, Canon C100, FS5, etc.
12 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to TA3 Female, 40cm/16 inches for Sound Devices 552
8 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to 90° BNC, 40cm/16 inches e.g. ALEXA Amira, Canon C300, Sony PDW-700,etc.
4 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to 4-Pin Mini Jack for recording Audio TC on iOS Devices, 20cm/8 inches
3 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to XLR Female, 30cm/12 inches e.g. Studio Environment
5 pièce (s) en stock
Adapter cable to feed timecode from any Tentacle timecode generator to a Sony FX3 and FX30 via the Sony Multi/Micro USB Terminal.
1 pièce (s) en stock
3.5mm Jack Plug (Neutrik) to BNC, 40cm/16 inches e.g. ALEXA Amira, Canon C300, Sony PDW-700, etc.
7 pièce (s) en stock
3,5mm Mini Jack 90° to 3,5 mm Mini Jack 90°, 30cm/12 inches e.g.Canon 5D, Sony A7s, GH4/5, Sony RX0, Mix-Pre 3/6, etc.
10 pièce (s) en stock
Multi-purpose 3,5mm 4-Pin Mini Jack Cable, 45cm/18 inches
2 pièce (s) en stock
he Deity TC-SL1 is the worlds first Bluetooth® enabled smart slate.
Analog Sync / Video Fiber Optic Transmitter with passive looped analog input - 10km - 1310nm - Fiber ST connectors. A 20% restocking fee applies to all product returns.
Analog Sync / Video Fiber Optic Transmitter with passive looped analog input - Mulitmode - 850 nm - Fiber LC connectors. A 20% restocking fee applies to all product returns.
Analog Sync / Video Fiber Optic Transmitter with passive looped analog input - 10km - 1310nm - Fiber SC connectors. A 20% restocking fee applies to all product returns.
Analog Sync / Video Fiber Optic Transmitter with passive looped analog input - 10km - 1310nm - Fiber LC connectors. A 20% restocking fee applies to all product returns.
Analogue Sync/Video to Fiber Optic Transmitter (Multimode, 850nm, LC connector). A 20% restocking fee applies to all product returns.
Analogue Sync/Video to Fiber Optic Transmitter (Singlemode, 1310nm, ST connector, 10km). A 20% restocking fee applies to all product returns.
Analog Sync / Video Fiber Optic Receiver - Fiber SC connectors. A 20% restocking fee applies to all product returns.
HD/SD Sync Pulse Generator with Reference Input. A 20% restocking fee applies to all product returns.
Analog Sync / Video Fiber Optic Receiver - Fiber LC connectors. A 20% restocking fee applies to all product returns.
The kit includes the TIMEBAR - a multipurpose timecode display - paired with a high-quality board, clapper sticks and a custom holder, that also serves as a mount for the TIMEBAR.
Délai habituel entre 4 et 6 semaines
The Deity TC-1 is a wireless timecode box designed to feel familiar. The on-board menu and display allow you to operate the unit and wireless sync multiple TC-1 units at the same time. With the free Bluetooth app, users are able to control every aspect of the TC-1 as well as other products from Deity from the Sidus Audio family of products.
Two super-small and user-friendly Timecode Generators. Come with: (2) Software License Keys; (2) TRS Sync Cables C07; (2) USB-C Cables for Charging and Setup; (2) Clamps for Locking a 90° Mini Jack Plug; (1)0 Velcro Loop Pads for Mounting; (4) Coloured Rubber Bands; (1) Branded Mesh Bag
TIMEBAR - Multipurpose Timecode Display
Délai habituel entre 4 et 6 semaines
Slate Kit for TIMEBAR including a board, clapper sticks and a holder from Filmsticks.
Délai habituel entre 4 et 6 semaines
The Tentacle Sync E mkII Timecode Generator single set pairs the lightweight, super-compact Sync E mk2 timecode generator with a downloadable Tentacle Sync Studio software license (macOS). This update to the Tentacle Sync E features Bluetooth 5.0 setup and battery management improvements.
Délai habituel entre 4 et 6 semaines
The Deity TC-1 is a wireless timecode box designed to feel familiar. The on-board menu and display allow you to operate the unit and wireless sync multiple TC-1 units at the same time. With the free Bluetooth app, users are able to control every aspect of the TC-1 as well as other products from Deity from the Sidus Audio family of products.
3.5mm Jack Plug (Neutrik) to 5-Pin LEMO 90°, 35cm/14 inches e.g. ARRI ALEXA Mini (cable direction to top)
Délai habituel entre 4 et 6 semaines
Deity C14 is a locking 3.5mm to 5-Pin LEMO timecode cable.
Tentacle to USB-C (A20-Mini) - Timecode Cable
Délai habituel entre 4 et 6 semaines
C16 (3.5 Locking TRS to Lemo 4 Timecode Cable)
Adapter cable to feed timecode from any Tentacle Sync Box to RED KOMODO cameras via the 9-pin EXT connector.
Délai habituel entre 4 et 6 semaines
Battery & Housing Exchange Kit for the Original Tentacle (2015-2017)
Délai habituel entre 4 et 6 semaines
Tentacle TRACK E Pocket Audio Recorder - Basic Box without lavalier microphone and accessories.
Délai habituel entre 4 et 6 semaines
Battery Replacement Kit with 5 batteries for the Tentacle SYNC E timecode generator (2017- )
Délai habituel entre 4 et 6 semaines
Anodized aluminum handle in orange for the Tentacle TIMEBAR with multiple thread options for mounting.
Délai habituel entre 4 et 6 semaines
Use the Deity Microphones C13 cable to feed timecode signal from a TC-1 timecode box generator to an Arri Alexa Mini camera. This cable features a right-angle, locking 3.5mm TRS male connector at one end and a right-angle 5-pin LEMO connector at the other.
C19 (3.5 Locking TRS to Din 1.0/2.3 Timecode Cable)
Anodized aluminum bracket for the Tentacle TIMEBAR with 1/4 and 3/8 threads and clamping mechanism, exclusively manufactured by LanParte.
Délai habituel entre 4 et 6 semaines
Microphone adapter to connect any lavalier microphone with a LEMO 3-pin connector (like Sennheiser, Audio Limited A10, Wisycom, Zaxcom) to the TRACK E Timecode Audio Recorder.
Délai habituel entre 4 et 6 semaines
This microphone adapter is used to connect any DPA lavalier microphones with a MicroDot connector to the lockable 3.5mm mini jack input of the TRACK E timecode audio recorder.
Délai habituel entre 4 et 6 semaines
Cable to feed timecode from any Tentacle Sync device to Panasonic LUMIX S1H, GH5s, GH6 and GH7 via Flash synchro connector (PC connector).
Délai habituel entre 4 et 6 semaines
3.5mm Jack Plug (Neutrik) to 1/4'' Plug 90°, 35mm/14inches e.g. BMD Production Camera, Tascam DR680etc.
Délai habituel entre 4 et 6 semaines
Deity C15 is a locking 3.5mm to BNC timecode cable.
The TC-SL1 Screen Protector offers very good protection for the wipeable area of ??the TC-SL1 Timecode Slate. It protects the digital clapperboard from damage caused by felt-tip pens or adhesive residue from adhesive tape.
Battery & Housing Exchange Kit for the Tentacle ORIGINAL timecode generator (2015-2017).
Délai habituel entre 4 et 6 semaines
Battery Replacement Kit for the Tentacle SYNC E (2017- ) Everything you need to replace your old built-in battery of the SYNC E by yourself.
Délai habituel entre 4 et 6 semaines
Battery DIY replacement kit for the Tentacle TRACK E Timecode Audio Recorder.
Délai habituel entre 4 et 6 semaines
It is compatible with any camera with a TRS input. It puts the timecode on channel L, and the audio from the built-in microphone (from the TC-1, not included) on channel R.
Tentacle Sync E accessory kit, incl. 2x clamps and 9x coloured rubber bands
Délai habituel entre 4 et 6 semaines
Pack of five locking clamps for SYNC E timecode generator.
Délai habituel entre 4 et 6 semaines
Loop Pads - 25 pieces
Délai habituel entre 4 et 6 semaines