Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
OLED Electronic View Finder EVF-V70
1 pièce (s) en stock
EVF Tilt Adapter Swiss warranty. A unique tool to expand the usability of the FUJIFILM GFX 50S's removable electronic viewfinder, the EVF-TL1 EVF Tilt Adapter permits adjusting the angle at which the EVF is attached to the camera body.
2 pièce (s) en stock
High quality viewfinder with built in proximity sensor, 4 element glass diopter, built in status information, and a digital focus chart.
1 pièce (s) en stock
The Z-Finder for Sony FX6 from Zacuto is an optical viewfinder that uses 2.5x magnification to turn the camera's LCD monitor into a clear, easy-to-focus viewfinder.
2 pièce (s) en stock
Glasses model HoodEYE eyecup for Canon 7D, 1D & 1DS MARK III / IV
5 pièce (s) en stock
The MVF-2 is a low latency (?1 frame delay) electronic color viewfinder with a high contrast OLED viewfinder display (1920 x 1080) and 4" LCD flip-out monitor (800 x 400). The eyepiece is based on the ARRICAM design and offers high contrast, low distortion, an evenly illuminated viewing area for a clean image and a wide exit pupil for freedom of movement...
The viewfinder is included in the AMIRA K0 camera packages and does not need to be ordered separately when ordering a AMIRA K0 camera package
Full HD OLED & LCD VF for HDC/HSC/HDW/PDW/F65/PXW/PMW-500
Full HD OLED VF for HDC/HSC/HDW/F65/PDW/PXW/PMW-500
7.4'' Colour OLED Viewfinder for HDC/HSC/PDW/HDW
Full HD (1920x1080) OLED Viewfinder for F5/55 Camera. Lemo connector, Knobs for brightness, Peaking and Contrast
2 16:9 widescreen B/W CRT viewfinder for the HDW Series, HDC1000R series and the New HSC300 HD/SD Cameras. ()Viewable area measured diagonally.
Panasonic AJ-HVF21KG is a 2inch B&W viewfinder compatible with the HPX-3100 camera.
Délai habituel 6 semaines
Colour LCD VF for HDVF compatible camera and camcorders
3.5Inches Color Lcd Hd Viewfinder Pmw-320/350/400/500
KineEVF2 Pack
KineEVF2 Full-HD OLED Viewfinder
Add the high-resolution URSA Cine EVF to your Blackmagic Design URSA Cine 12K or PYXIS 6K camera for crisp, clear images, making shooting easy in any environment. The EVF features a 1920 x 1080 color OLED display supporting up to 60 fps to view your image with status information, frame guides, and even a built-in focus chart to help you achieve the...
A heated eyecup compatible with the AMIRA MVF-1 (new eyepice) and the ALEXA EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with AMIRA MVF-1 (old eyepiece) or film camera eyepieces. Includes heated eyecup cable KC-42 (K2.47771.0).
The Blackmagic URSA Viewfinder is designed specifically for use with the URSA and URSA mini digital film cameras.
he EVF101 Electronic Viewfinder from Z CAM offers a crisp viewing option for your Z CAM or other camera lacking an integrated viewfinder. This viewfinder has an HDMI input that supports up to UHD 4K30 video and an SDI input supporting up to 1080p60 video.
Largely extended range for positioning the eye in avertical and horizontal direction. Includes an improved position for the approach sensor with increased compatibility for "left eye operators" and also for using individual eyecushions. Only for MVF-1 with serail number 2150 and below, MVF-1 with serial number 2151 and higher do include this upgrade already.
The VMB-5 is a medium length viewfinder mounting bracket with fast and comfortable adjustment. The VMB-5 attaches to the Square Accessory Sleeve SAS-1. The SAS-1 attaches to any two M4 attachment points that are 20 mm apart. The ARRI viewfinders EVF-1, EVF-2, MVF-1 or MVF-2 can be attached to the dovetail on the VMB-5.
Compatible with the Sigma fp series of mirrorless cameras, the EVF-11 Electronic Viewfinder is an auxiliary viewfinder offering bright, high-magnification eye-level monitoring.
Délai habituel entre 6 et 8 semaines
The Viewfinder Mounting Bracket VMB-5 offers a longer reach than traditional viewfinder brackets and is the most flexible and comfortable method to attach a viewfinder to a camera. Positioning the viewfinder in a 360° arc is done by loosening a single thumb screw and freely repositioning the viewfinder, which will remain in place thanks to double...
Attaches MVF-1 viewfinder to ALEXA Mini via 15mm LWS rods and viewfinder mount. Requires MAP-2 for 15mm rod support.
Ready to use directors viewfinder kit for any camera with an E mount.
The PYXIS Monitor EVF Kit from Blackmagic Design is a versatile, high-brightness monitor designed specifically for the Blackmagic PYXIS camera. Performing as much more than just an external display, it functions as a powerful camera extension with a touchscreen interface, allowing users to control all camera features.
Sturdy telescoping bracket that positions the Electronic Viewfinder EVF-1 or MVF-1 at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable.
The Canon EVF-V50 OLED Viewfinder for C500 Mark II is a tilting EVF that you can mount on your Canon C500 Mark II camera.
Délai habituel 2 semaines
LCD View Finder LVF-11 (fp)
Délai habituel entre 6 et 8 semaines
Used on current ARRI cameras, this proven viewfinder bracket offers the best adjustment range and sturdiness for this type of viewfinder from the Sony FS7II/ FX9.
Featuring a 5" LCD touchscreen, the PYXIS Monitor is ideal for use as a viewfinder for more accurate focusing and framing. This kit comes with a clip-on sunshade, fixed and swivel mounts, a dovetail shoe with mounting screws, and a USB-C viewfinder cable that connects to your camera.
The VFA-4 optimizes handheld operating with on-board monitors by profiting from the adjustability of classic ARRI viewfinder mounts such as ARRI VMB-3, MVB-1 or VMB-5. The VFA-4 is well suited for operating with suspension harness and suits particularly well the ARRI Camera Control Monitor CCM-1.
Connects the Electronic Viewfinder EVF-1 to the EVF socket on ALEXA and ALEXA XT cameras. Ideal length for use of EVF-1 on camera left side in handheld mode.
This viewfinder bracket is designed for the Canon EOS C200 viewfinder kit
Blackmagic PYXIS Monitor is a versatile 5? HDR touchscreen monitor with full camera control that can be mounted almost anywhere. It provides an additional monitoring and camera control option that can be mounted anywhere so its perfect for use when rigging or other accessories block Blackmagic PYXIS' internal display.
Délai inconnu
FF Heavy OLPF (OLPF-FF3)
An attachment that allows the AMIRA viewfinder to be mounted to two 15 mm lightweight rods above the lens - as can be found on the Universal Adapter Plate UAP-2 (K2.0001221). This bracket is already included in the Universal Adapter Plate UAP-2 Set (K0.0001280).
Viewfinder bracket universal
This viewfinder bracket is designed for the Arri viewfinders
The Nikon DR-6 Rectangular Right Angle Viewfinder provides an upright, unreversed image for right-angle viewing, which is very convenient for waist-level or low-angle photography.
The DR-5 Screw-In Right Angle Viewfinder from Nikon provides an upright, unreversed image for right-angle viewing, very convenient for waist-level or low-angle photography.
Viewfinder bracket with rosette
Separate top handgrip including top 15mm rails (Fits directly on Blackmagic Cinema Camera)
This viewfinder bracket is designed for the Canon EOS C200 viewfinder
This viewfinder bracket kit is designed for use with any viewfinder with a 1/4" thread on the bottom side
FF Light OLPF (OLPF-FF1)
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Mounting bracket for EVF (V)
This viewfinder bracket kit is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole
This viewfinder bracket is designed for the Arri viewfinders
Viewfinder bracket for Sony PXW-FS7
Magnify your viewfinder's center image area by 2x with Nikon DG-2 Eyepiece Magnifier, which flips up to quickly view the entire image area when needed.
The SAS-2 is a modernization of the original SAS-1 that can be attached pointing rearward at the front of the handle CCH-5, optimizing space with short lenses set-ups.
Viewfinder Adapter VFA-3
Single sided 15 mm NATO rail long; length: 170 mm
This viewfinder bracket is designed for the Sony PXW-FS7 / FS7 II and is meant to replace the original viewfinder bracket of this camera
Separate 15 mm viewfinder adapter for top handgrip
Viewfinder extender
M/F6 Focusing Screen
U/F6 Focusing Screen
L/F6 Focusing Screen
J/F6 Focusing Screen
E/F6 Focusing Screen
?h? N?k?n ? ???? F??u??ng ??r??n ?? th? ?t?nd?rd f??u??ng ??r??n ?u??l??d f?r ?ll N?k?n ?F ?LR ??m?r??. ?h?? ??rt??ul?r ??r??n ?? t? f?t th? N?k?n D3 D?LR. ?h? ???? ? F??u??ng ??r??n ?? ?n ?nt?r?h?ng??bl? f??u??ng ??r??n th?t ?ff?r? un?b?tru?t?d v??w?ng ?nd ???? f??u??ng ?v?r th? ?nt?r? m?tt? ?urf???. ?h?? ??r??n ?? ?d??l f?r g?n?r?l ?h?t?gr??h?.
The ZMU-4 ARRI Rosette can be mounted as a second rosette on the ZMU-4. This second rosette is already premounted on the ZMU-4 when ordering KK.0043770 ZMU-4 Basic Set.
The Nikon DK-17A Anti-Fog Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece includes a fog-resistant optical element and provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
The Nikon DK-27 Eyepiece Adapter for D5 DSLR is a replacement eyepiece for the Nikon D5 DSLR camera. The eyepiece provides a comfortable frame with which to utilize the camera's viewfinder.
Dedicated to the Nikon Z9 and Z8 mirrorless cameras, the DK-33 Rubber Eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
The Nikon DK-17F Fluorine-Coated Finder Eyepiece is a replacement eyepiece for select Nikon DSLR cameras. This eyepiece features fluorine coated glass and soft durable rubber and is safe for eyeglass users.
The Nikon DK-17 Eyepiece is a replacement eyepiece for select Nikon SLR and DSLR cameras. This eyepiece provides a comfortable surface for the area around your eye while framing a subject through the camera's viewfinder.
Use this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.
This Viewfinder Eyecup from SmallRig features a soft, silicone design to ensure comfort, reduce eye fatigue, and keep sunlight from entering your viewfinder. It's compatible with the eyepiece of the Sony a7C II and a7CR mirrorless cameras.
Délai habituel entre 4 et 5 semaines
KineEVF Eyecushion
The DK-32 Rubber Eyecup is dedicated for the Nikon Zfc mirrorless camera and aids in the comfortable viewing through the camera's viewfinder.
The Nikon DK-19 Rubber Eyecup allows for more comfortable viewing through the camera's viewfinder, especially for eyeglass wearers. Less stray light enters the viewfinder and a less flared, clearer image with which to compose your shot is provided.
The Nikon DK-28 Rubber Eyecup, which improves viewing comfort when the camera is against your face, fits right onto the viewfinder of the Nikon D7500. The eyecup also blocks stray light from entering the viewfinder and creating glare, which prevents you from seeing the image clearly.
Dedicated to the Nikon Z 7 and Z 6 mirrorless cameras, the DK-29 Rubber Eyecup is a spare or replacement item for the one originally included with the camera. This eyecup blocks stray light from causing glare and simultaneously improves viewing comfort.
DK-30 Rubber Eyecup
Eyepiece shield made from comfortable soft rubber. Minimises the amount of stray light that enters the viewfinder.
Eye Cup XT
Eye Cup XT
The Nikon DK-9 Rubber Eyecup fits Nikon N80 SLR cameras, easily mounting to the viewfinder; it provides a comfortable surface for the area around your eye, preventing scratches or damage to your eyeglasses.
Round Eyecup for GFX 50S, X-T2, and X-T1
Long Eyecup
The Nikon DK-16 Rubber Eyecup for Select Nikon Cameras is a viewfinder frame for select Nikon DSLR and SLR cameras. This eyecup is intended to prevent stray light, which could make focusing and composing an image difficult, from coming in between a compatible camera's viewfinder and the eye it is held up to.
The Nikon DK-22 Eyepiece Adapter allows the use of eyepiece accessories made for other cameras that feature the round eyepiece.
The Nikon DK-25 Rubber Eyecup is a replacement for the eyecup included with the D5300 DSLR camera. It allows for more comfortable viewing through the camera's viewfinder. It also decreases the amount of stray light that can enter the viewfinder and cause flare.
The DK-26 Eyepiece Cap from Nikon is compatible with the Nikon Df DSLR Camera. It is designed to cover the viewfinder window to keep stray light from entering the viewfinder and causing flare that negatively affects your exposures.
The DK-5 Eyepiece Cap from Nikon protects select camera's viewfinders from dust and moisture when not in use. It is also useful when using the self-timer or remote release functions in conjunction with long exposures, in order to prevent light from entering the viewfinder and affecting auto-exposure results.