Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
This pneumatic crimp tool is suitable for x-pins in sizes 12, 16 and 18. Pneumatic tools are known for their trouble-free handling and for their adaptability in both military and industrial settings. The compact size as well as its light weight allows this tool to be used as hand tool and also as high production bench tool. The hand trigger is designed...
Power supply and central interface for AIREA, with DSP matrix, DSP functions in inputs and outputs, Dante inputs, AIREA input (AES / EBU), USB-C and Fohhn-Net interface, programmable switch contacts, 4x AIREA output, max. Fohhn-Net load 200W per outlet, black
Power supply and central interface for AIREA, with DSP matrix, DSP functions in inputs and outputs, 4x analog inputs, AIREA input (AES / EBU), USB-C and Fohhn-Net interface, programmable switch contacts, 4x AIREA output, max. Fohhn-Net load 200W per outlet, black
Dante Fiber input interface for DFM systems
Desktop 12x12 USB-C Audio/MIDI Interface
The RU-MLB4P is equipped to operate from a PoE enabled network switch. The RU-MLB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
?The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range.
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is...
The DDB-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is...
The RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
64-in/64-out MADI Card with Sample Rate Conversion
The RU-LB4P is equipped to operate from a PoE enabled network switch. The RU-LB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
Microphone USB soundcard with LEA DSP Engine for automatic level control, USB 2.0 Full Speed, 24bit/192kHz, ASIO+WDM driver, AES-3 in/out, Mic In with phantom, external power supply YT4290 included
The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected.
Perfect for both studio and live environments, the TASCAM Studio Bridge seamlessly bridges the gap between your beloved analog mixer and modern digital workflows, so you can experience the best of both worlds - the warmth of analog and the precision of digital.
Délai habituel entre 4 et 6 semaines
Dual Line output and 1x IFB output module - EBU-Compliant Audio Level Version
Délai habituel entre 2 et 3 semaines
The RU-MLB2P is equipped to operate from a PoE enabled network switch. The RU-MLB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
Crimping instrument for Syntax SVK-Series.
The RU-FNP is equipped for PoE which powers the RU-FN and the connected Format-A senders. If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding the Format-A RJ45 connector is separately protected...
The RU-LB4 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network.
The RU-NL4P is equipped to operate from a PoE enabled network switch. The RU-NL4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NL4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
26 x 30, 32-bit / 192 kHz Recording Interface with Studio One Pro and 12-Month Studio One+ Hybrid Membership Included
The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.
Line Level Audio to Network Interface
The RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
DANTE Adapter IO 2 CH PRO
The RU-LB2P is equipped to operate from a PoE enabled network switch. The RU-LB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
FC?404NETxl is a hybrid, analog and Dante, audio cross?connect mixer. Input audio, either analog lines/microphones or Dante audio over IP channels, are mixed and cross?connected to the analog audio output lines and/or Dante audio over IP output streams. The mixer accepts PoE via its network connection.
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2.
The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
PUC2 LEA - Microphone USB soundcard with LEA DSP Engine for automatic level control, USB 2.0 Full Speed, 24bit/192kHz, ASIO+WDM driver, AES-3 in/out, Mic In with phantom, external power supply YT4290 included
Dual Mic/Line Input Module - EBU-Compliant Audio Level Version
Délai habituel entre 2 et 3 semaines
The RU-NL4 is a high quality converter that provides professional line-level outputs from four Dante network audio channels. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain.
The RU-NL2P is equipped to operate from a PoE enabled network switch. The RU-NL2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
The RU-LB2 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate conversion from the USB input to the Dante network.
The RU-NL2 is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain.
The RU2-CS1 Serial Controlled Interface is a device that controls (8) open-collector outputs and provides (8) separate 0 to 10VDC outputs to control external VCAs or other equipment with control inputs in this range. It also features (8) status inputs to sense external switch or transistor closures. Use this unit to control your RDL modules or OEM products.
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion.
This foot pedal is suitable for pneumatic crimping tools and is ideal for any work bench and for quick assembly. Air supply requirements are 5.5 to 8.0 atmospheres clean dry air. The system requires standard safety valves.
Bench mount adjustable. Bench mounted, the optional foot valve allows handsfree operation. The bench mount will allow the tool to be secured at virtually any angle for individual comfort, thereby minimizing operator fatigue.
PUC2 Professional USB audio interface, AES / EBU inputs on XLR, inputs balanced analog outputs on XLR
PUC2 Professional USB Audio Interface, AES / EBU Input Outputs, Input Outputs balanced analog, SUB-D25 connector
The PreSonus Quantum 2626 is a professional ultra-low-latency audio interface that provides up to 26 inputs and 26 outputs of combined analog and digital connections. The units converters allow for low-latency recording as well as dynamic ranges of 115 dB on both AD (analog to digital) and DA (digital to analog) conversions.
8-in/8-out AES/EBU Card with Sample Rate Conversion
USB 3.0 Audio Converter
20 x 24, 32-bit / 192 kHz Recording Interface with Studio One Pro and 12-Month Studio One+ Hybrid Membership Included
PUC2 Lite Professional USB audio interface with AES / EBU outputs on XLR
A complete recording package that combines the Quantum ES 2 desktop 2x2 USB-C audio/MIDI interface, M9 large-diaphragm condenser microphone, HD9 professional headphones, and a pair of Eris 3.5BT 2nd Gen active Bluetooth speakers.
Inline female 150 pins gold crimp rubber diameter 22 to 32mm
The Dante Audinate ADP-BT-AU-2X1 AVIO Bluetooth adapter provides wireless connectivity to Dante networks for mobile devices and computers.
The A-2 live has been specially developed to enable a high-quality, trouble-free transfer of digital audio data from a computer to a professional sound reinforcement system
The A-1 live has been specially developed to enable a high-quality, trouble-free transfer of audio data from a computer to a professional sound reinforcement system
4 x 4, 24-bit / 192 kHz Recording Interface with 6-Month Studio One+ Membership Included
Interface Card with MIDI I/O and 5-in/5-out GPI I/O
Dante AVIO 2x2 AES3/EBU I/O Adapter for Dante Audio Network
The Audinate Dante AVIO 2-Channel Analog Input Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog mixers, DI boxes, keyboard instruments, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of...
The Audinate Dante AVIO 2-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of...
A complete recording package that combines the AudioBox USB 96 (25th-Anniversary) desktop 2x2 USB-C audio interface, M7 MKII large-diaphragm condenser microphone, HD7 professional headphones, and a pair of Eris 3.5BT 2nd Gen active bluetooth speakers.
The PreSonus ioStation 24c Audio Interface and Production Controller is an elegant, ergonomic desktop device that provides the essential tools you need to record, mix, and produce in any home studio, project studio, or podcast setup, all with tactile control over your session using a single USB Type-C cable.
This universal positioner is a crimping die for SVKTCRIMP-versions.
The NA-11 Fohhn-Net USB Adapter is an essential tool for configurating all devices in a Fohhn-Net via PC.
The Dante AVIO USB Adapter lets you connect any computer to a Dante audio network with zero software installation, and can be used with any audio application for playout or recording. Ideal for conference rooms and presentation events.
The Audinate Dante AVIO 1-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of...
The Audinate Dante AVIO 2x2 USB I/O Adapter is a full-featured Dante device that supports 2 x 2 channels of bidirectional audio, allowing PCs and mobile devices to record and playback audio with any Dante-enabled device over a standard IP network.
The Audinate Dante AVIO 1-Channel Analog Input Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog mixers, DI boxes, keyboard instruments, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of...
2 x 2, 24-bit / 192 kHz Recording Interface with 6-Month Studio One+ Membership Included
USB 3.0 Audio Converter
150 Pins for cables with diameter 19-28mm. Female cable connectors without contacts.
150 Pins for cables with diameter 22-32 mm. Female cable connectors without contacts.
The d:vice from DPA Microphones is a mobile A/D audio interface developed for content makers who need to capture high-fidelity audio with their smartphones or tablets, when on the go.
The ZOOM UAC-232 USB Audio Converter is the first dedicated 32-bit float audio interface, designed for musicians who demand more quality in their productions.
Type A, length 4, 40 IN (female/send) and 4 OUT (male/return)
Complete recording package with USB-C audio interface, high-definition headphones, and cardioid condenser microphone for aspiring creators.
Audio Interface for Music & Streaming
Removal tool for Syntax contacts with the size 18 for connectors with 100 to 150 pins.
Front plate for woodbox large with 48 D-Series cut-outs
150 Pins Female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
Audio Interface for Music & Streaming
Cable connector gold solder cable diameter 6-12 mm
Adapter SPK08 male/female silver contacts
The U-24 is a compact, 2-in/4-out audio interface that provides all of the essential tools you need for recording and performing with high resolution, 24-bit/96 kHz audioanywhere you go
Inserting tool for Syntax contacts with the size 18 for connectors with 150 pins. The gripper has a specially customized profile for pins to enable easy assembling.
Type A, length 2, 20 IN (female/send) and 4 OUT (male/return)
25 Pins, cable diameter 6-13 mm. Female cable connector with standard locking ring and gold-plated crimp contacts. The housinds are made of aluminium alloy and are black anodized and for heavy duty. The bayonet locking is protected by a ring of stainless steel and has a visible, audible and noticeable marking for the lock.
25 Pins, cable diameter 13-18 mm. Female cable connector with golden crimp contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
25 Pins, cable diameter 13-18 mm. Female cable connector with standard locking ring and gold-plated crimp contacts. The housinds are made of aluminium alloy and are black anodized and for heavy duty. The bayonet locking is protected by a ring of stainless steel and has a visible, audible and noticeable marking for the lock.
25 Pins, cable diameter 6-13 mm. Female cable connector with golden crimp contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
Inline female 25 pins solder contacts diameter 13-18mm
Inline female 25 pins solder contacts diameter 6-13mm
25 pins black anodised female receptacle with gold-plated crimp contacts AWG 20÷26.
25 pins female receptacle with gold solder contacts made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
25 pins female receptacle with gold crimp contacts made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
85 Pins for cables with diameter 19-28 mm. Female cable connectors without contacts.
85 Pins for cables with diameter 15-23 mm. Female cable connectors without contacts.
85 Pins for cables with diameter 22-32 mm. Female cable connectors without contacts.
AudioBox USB 96 25th Anniversary Edition - Audio Interface
Type B, length 2, 16 IN (female/send)
Type C, length 2, 12 IN (female/send) and 4 OUT (male/return)
Female Cable Connector 8 pole with rubber locking ring, silver solder pins, M32 Normal (11-21 mm) cable gland.
StageBox Type B 12 Inputs
On-the-go solo musicians looking for a compact audio interface will appreciate the streamlined and easy-to-use feature set on the Zoom AMS-22, an ultraportable solution for recording and streaming to a Mac/Windows computer or iOS/Android mobile device with a TRS/XLR input, two TRS outputs, a 3.5mm headphone jack, and a USB-C connector.
Inserting tool for Syntax contacts with the size 16 for connectors with 25 to 85 pins. The gripper has a specially customized profile for pins to enable easy assembling.
Removal tool for Syntax contacts with the size 16 for connectors with 25 to 85 pins.
Cable Connector 8 pole with rubber locking ring, silver solder pins, M32 Normal (11-21 mm) cable gland.
25 Pins, cable diameter 6-13 mm. Black anodised male cable connectors with gold-plated crimp contacts.
25 Pins, cable diameter 6-13 mm. Male cable connectors with golden crimp contacts for AWG 20÷26.
54 Pins for cables with diameter 11-21 mm. Female cable connectors without contacts.
54 Pins for cables with diameter 18-25 mm. Female cable connectors without contacts.
Fastening tool for multipin connectors
85 Pins for cables with diameter 15-23 mm. Male cable connectors without contacts.
85 Pins for cables with diameter 22-32 mm. Male cable connectors without contacts.
85 Pins for cables with diameter 19-28 mm. Male cable connectors without contacts.
19 Pins, cable diameter 10-14 mm. Male cable connectors with golden crimp contacts for AWG 20÷26.
19 Pins for cables with diameter 10-14 mm. Male cable connectors with golden solder contacts.
37 Pins for cables with diameter 11-21 mm. Female cable connectors without contacts.
37 Pins for cables with diameter 18-25 mm. Female cable connectors without contacts.
54 Pins for cables with diameter 11-21 mm. Male cable connectors without contacts.
54 Pins for cables with diameter 18-25 mm. Male cable connectors without contacts.
USB Audio Interface, 2In/2Out, USB-C
85 pins Female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
19 pins female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
19 Pins for cables with diameter 14-25 mm. Female cable connectors without contacts.
54 pins female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
Type A, length 1, 8 IN (female/send) and 4 OUT (male/return)
13 Pins for cables with diameter 6-12 mm . Female cable connectors without contacts.
Inline M 54pin No Con Pg29
19 Pins for cables with diameter 10-14 mm. Male cable connectors without contacts.
25 Pins for cables with diameter 13-18 mm. Female cable connectors without contacts.
25 Pins for cables with diameter 6-13 mm. Female cable connectors without contacts.
A 4x4 cm small, mobile and flexible audio interface for two microphones and headphones.
37 Pins for cables with diameter 11-21 mm. Male cable connectors without contacts.
37 Pins for cables with diameter 18-25 mm. Male cable connectors without contacts.
Female Cable Connector 8 pole, no ring, silver solder pins pre-assembled, M32 Normal (11-21 mm) cable gland.
37 pins Female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
Dust Cap Female 85/100/150/201pin
Black Y-splitter kit for the assembly with powerCON TRUE1 chassis connectors NAC3PX, NAC3FPX, NAC3FXW, NAC3MXW and NPFK-X-Y-Z
13 Pins for cables with diameter 6-12 mm. Male cable connectors without contacts.
6U Rack mount kit for Studio Bridge
Délai habituel entre 4 et 6 semaines
25 pins female receptacle without contacts, made of aluminium alloy shells with high resistance black finish. Bayonet ramp protrusion protected by stainless steel ring with an audible, visual and tactile indication of locking.
Cable Connector 8 pole, silver solder pins, M32 Normal (11-21 mm) cable gland.
Type B, length 1, 8 IN (female/send)
Dust Cap Male 85/100/150/201pin
Type C, length 1, 8 IN (female/send)
Empty black BoXo Snakebite corpus with 4x D-size cut-outs, without front panels, housing with real M3 threads for easy assembly, incl. 8 screws for the front plates and screws/threads for the assembly of the D-size chassis connectors.
Dust Cap Female 37 pin
Dust Cap Female 54 pin
25 pins male receptacles with gold-plated crimp contacts.
25 pins male receptacle with golden crimp contacts for AWG 26÷20
25 pins male receptacle with golden solder contacts.
Dust Cap Male 37 pin
Dust Cap Male 54 pin
Audio Interface Holder for U-Series Interfaces
Male receptacle without contacts for connectors with 150 Pins
BoXo Classic corpus, without frontpanels Case with real M3 threads for easy assembly. Corpus with a 44 mm cavity and 4x M4 threads for assembly of a schuko plug socket
Empty BoXo classic corpus made of aluminium, without front panels, housing with real M3 threads for easy assembly, incl. 8 screws for front plate mounting.
Male receptacle without contacts for connectors with 85 Pins.
Dust Cap Female 13pin -19pin
Fastening tool for multipin connectors in all key dimensions.
Dust Cap Male 25 pin
Male receptacle without contacts for connectors with 54 Pins
Dust Cap Male 13pin-19pin
Male receptacle without contacts for connectors with 19 Pins.
Empty BoXo classic corpus made of aluminium, without front panels, housing with real M3 threads for easy assembly, incl. 8 screws for front plate mounting.
Empty black BoXo classic corpus made of aluminium, without front panels, housing with real M3 threads for easy assembly, incl. 8 screws for front plate mounting.
Male receptacle without contacts for connectors with 25 Pins
Male receptacle without contacts for connectors with 37 Pins.
Black, empty BoXo Classic front plate made of aluminium, with two D-sized cut-outs. The mounting screws, threads and the MFD M3 mounting frame for the D-format chassis connectors are included in delivery.
Black, empty BoXo Mini universal housing with M3 threads, for self-made assembly of XLR chassis connectors, without front plates.
The Neumann MIDI Adapter Set includes two cables for connecting the 1/4" MIDI input and output on the MT 48 audio interface to various MIDI devices. The cables are terminated with a 5-pin DIN male connector on one end and a 1/4" male connector on the other.
Black, empty BoXo Classic front plate made of aluminium, with one D-size cut-out. The mounting screws, threads and the MFD M3 mounting frame for the D-format chassis connectors are included in delivery.
Black, empty BoXo Classic front plate with one speakON NLT8MP cut-out. Connector is not included in delivery.
Black, empty BoXo Classic front plate with one powerCON TRUE1 NAC3PX cut-out. Connector not included in delivery.
Black, empty BoXo Classic front plate with one powerCON TRUE1 NAC3FPX cut-out.Connector not included in delivery.
Black, empty BoXo Snakebite front plate made of aluminium, with one D-size cut-out. The mounting screws, threads and the MFD M3 mounting frame for the D-format chassis connectors are included in delivery.
Black, empty BoXo Mini front plate with one D-size cut-out. The front plate comes with screws and threads for the D-size chassis connector.
Black, empty BoXo Classic front plate with one MG20 cut-out, for cables with a diameter between 7 to 13 mm. The MG cable screw is not included in delivery.
Black BoXo Classic cover front plate made of aluminium.
Black, empty BoXo Classic front plate with two MG20 cut-outs, for cables with a diameter between 7 to 13 mm. The MG cable screws are not included in delivery.
Black BoXo Snakebite cover front plate made of aluminium.
Black, empty BoXo Classic front plate with one MG25 cut-out, for cables with a diameter between 9 to 17 mm. The MG cable screw is not included in delivery.
Black, empty BoXo Snakebite front plate made of aluminium, with one MG25 cut-out, with M3 threads for assembly of front plates.
Black, empty BoXo Mini front plate with one M25 cut-out.
Black, empty BoXo Mini front plate with one M20 cut-out.
Black, empty BoXo Mini front plate with one M16 cut-out.
Black BoXo Mini cover front plate made of aluminium.
Black, empty BoXo Snakebite front plate made of aluminium, with one MG20 cut-out, with M3 threads for assembly of front plates.
Black, empty BoXo Snakebite front plate with one speakON G-type cut-out for NL8MP* chassis connectors. Connectors are not included in delivery.
Guide pin for female contact size 16 for connectors of 13 up to 85 pins.
Guide pin for female contact size 18 for a connector of 100 to 150 pins.
Black cover plate with 8x D-size cut-out for all stage box trapezoids with the size for 8 connectors. This allows individual assembling.
Closed black cover plate for all stage box trapezoids with the size for 8 connectors.
Black cover plate with 4x D-size cut-out for all stage box trapezoids with the size for 4 connectors. This allows individual assembling.
Closed black cover plate for all stage box trapezoids with the size for 4 connectors.
Gold plated crimp contact, female, size 16 for connectors of 13 up to 85 pins.
Gold plated solder contact, female, size 16 for connectors of 13 up to 85 pins.
Gold plated crimp contact, female, size 16 for connectors of 13 up to 85 pins.
Gold plated crimp contact, female, size 18 for a connector of 100 to 150 pins.
Gold plated solder contact, male, size 16 for connectors of 13 up to 85 pins.
Gold plated crimp contact, male, for connectors of 13 up to 85 pins / AWG 26-20.
Gold plated crimp contact, male, size 16 for connectors of 13 up to 85 pins.
Gold plated crimp contact, male, size 18 for a connector of 100 to 150 pins.
DustCap RJ45 Plug w. fastening