Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
1x4 4K60 HDMI 2.0 Ultra Slim Splitter with HDCP 2.2 and down scaling
2 pièce (s) en stock
Mini Converter SDI Distribution 4K
4 pièce (s) en stock
1x2 4K60 HDMI 2.0 Ultra slim Splitter with HDCP 2.2 and down scaling
1 pièce (s) en stock
The D8 8K Splicer 1-Channel HDMI 2.1 Input Interface from RGBlink is a multi-screen video processing splicer with an HDMI 2.1 input capable of handling resolutions up to 8K60 and with four HDMI outputs.
2x1:8 4K UHD HDMI and HDBaseT Distribution Amplifier
2x1:8 4K UHD HDMI and Long-reach HDBaseT DA
The VM-214DT is a 2x1:4 4K@60Hz (4:2:0) HDMI & extended-reach HDBaseT DA for HDMI & HDBaseT signals. It reclocks and equalizes the signal and distributes it to four identical HDBaseT outputs and a looping HDMI output.
VM-8UX is a compact and high performance 1:8 4K distributor for standard broadcast-grade SDI signals of up to 12G transmitted data rate
VM-10H2 is a 1:10 distribution amplifier for up to 4K HDR, HDMI 2.0 signals that comply with HDCP 2.2 content protection standard. The unit takes one HDMI input, equalizes and reclocks the signal, and distributes it to ten identical outputs
VM-4DT is a high-quality, long-reach 4K@60Hz (4:2:0) HDBaseT extender distributor that takes one long-reach HDBaseT input, equalizes and reclocks the signal and distributes it to four identical HDBaseT outputs
The VM-16H is a distribution amplifier for HDMI signals.
The VM-16H is a distribution amplifier for HDMI signals. It reclocks and equalizes the signal and distributes it to 16 identical outputs.
The VM-216H is a distribution amplifier for HDMI signals. It reclocks and equalizes one of 2 selectable input signals and distributes it to 8 or 16 identical outputs.
The VM-4HDT is a high-quality 1:4 4K@60Hz (4:2:0) HDBaseT to HDBaseT distribution amplifier that takes one HDMI input, equalizes and reclocks the signal and distributes it to four identical HDBaseT outputs.
VM-3DT is a high-quality, long-reach 4K@60Hz (4:2:0) HDBaseT extender distributor that takes one long-reach HDBaseT input, equalizes and reclocks the signal and distributes it to three identical HDBaseT outputs
1:3+1 4K60 HDMI to Long-Range HDBaseT Distribution Amplifier
The VM-1021N is a high-performance distribution amplifier for composite or SD-SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.
2x1:8 HDMI Distribution Amplifier
1:2+1 4K60 4:2:0 HDMI to Long-Range HDBaseT Distribution Amplifier
1:2 4K60 4:2:0 Long-Reach HDBaseT DA
The RU-VCA6A is a six-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources. The unit has six audio channels for level control of surround sound (5.1) or six individual analog audio channels. Each module can be remote controlled from a single or multiple locations.
The VM-4UX is a compact and high performance 1:4 4K distributor for standard broadcast-grade SDI signals of up to 12G transmitted data rate.
The VM-24H is a distribution amplifier for HDMI signals. The unit reclocks and equalizes one of two selectable input signals and distributes it to four identical outputs.
The VM-10HDxl is a high-performance distribution amplifier for 3G HD-SDI signals. The unit takes one input, provides reclocking and equalization and distributes the signal to ten identical outputs.
The VM-8H is a distribution amplifier for HDMI signals. It reclocks and equalizes the signal and distributes it to 8 identical outputs.
Dual 1x4 12G-SDI Distribution Amplifier, dual input channels with four each 12G-SDI outputs, DashBoard support
The VM-24HC is a high-performance switcher and distribution amplifier for HDMI signals. The unit accepts one of two HDMI inputs and distributes the selected signal to four HDMI outputs.
The VM-2UX is a compact and high-performance 1:2 4K distributor for standard broadcast-grade SDI signals of up to 12G transmitted data rate.
The VM-4HDCPxl is a high-performance distribution amplifier for DVI signals. The unit reclocks and equalizes one input signal and distributes it to four identical outputs.
Dual 1 to 3 12G SDI Distribution Amplifier, (supports 270Mbit/s, 1.5GBit/s, 3Gbit/s, 6GBit/s, 12GBit/s). A 20% restocking fee applies to all product returns.
The VM-2DH is a converter for DisplayPort signals. The unit inputs a DisplayPort signal that it converts to HDMI and DVI outputs.
The VM-4H2 is a 1:4 distribution amplifier for up to 4K@60Hz (4:4:4) HDMI 2.0 signals, complying with HDCP 2.2 content protection standard.
The VM-80VN is a high-performance distribution amplifier for composite or SDI signals.
The RU-VCA2A 2-Channel Digitally Controlled Attenuator is a full-featured, studio-quality, dual-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources. This module can be remote controlled from a single or multiple locations. Rear-panel terminals provide flexible control options using a variety of...
1x6 12G HD/SD SDI Reclocking Distribution Amplifier, 120M 12G cable equalization
he VM-400HDCPxl is a 4K@60Hz (4:2:0) 1:4 distribution amplifier for HDMI signals via single-link DVI.
1 to7 12G SDI Distribution Amplifier, (supports 270Mbit/s, 1.5GBit/s, 3Gbit/s, 6GBit/s, 12GBit/s). A 20% restocking fee applies to all product returns.
Dual Channel 1 to 3 SDI Dustribution Amplifier (up to 3GBit/s). A 20% restocking fee applies to all product returns.
1 to 7 SDI Dustribution Amplifier (up to 3GBit/s). A 20% restocking fee applies to all product returns. A 20% restocking fee applies to all product returns.
1 in, 5 out reclocking 3G-SDI, HD-SDI, SDI and ASI distribution amplifier. In non reclocked mode data rates down to 10MHz can be handled. Outputs 1 and 4 are polarity sensitive and may not pass ASI
Délai habituel entre 2 et 3 semaines
The VM-3H2 is a 1:3 distribution amplifier for up to 4K@60Hz (4:4:4) HDMI 2.0 signals, complying with HDCP 2.2 content protection standard.
1:2 4K DVI DA
The RU-VDA4 is a 1x4 Composite Video distribution amplifier; it accepts one Composite Video signal on a BNC connector and outputs four Composite Video signals. It features gain control and a RACK-UP housing.
1x6 3G HD/SD SDI Reclocking Distribution Amplifier, 120M 3G cable equalization
The VM-22H is a distribution amplifier for HDMI signals. The unit reclocks and equalizes one of two selectable input signals and distributes it to two identical outputs.
4K HDMI 2.0 1:2 Verteilverstärker
The OG-C10DA-R0 Analog Video 1x9 openGear Distribution Amplifier from AJA is an openGear compatible analog BNC video DA. It has one input, one loop output, and eight BNC outputs, all supporting NTSC and PAL signals.
1 input to 8 outputs 12G/6G/3G/HD/SD-SDI Distribution Amplifier with equalization and re-clocking. Auto detect input
Délai habituel entre 3 et 4 semaines
The FP-VDA4 is a 1x4 Composite Video distribution amplifier; it accepts one Composite Video signal on a BNC connector and outputs four Composite Video signals. It features gain control and a flat pack housing.
The VM-50AN is a high-performance distribution amplifier for balanced and unbalanced stereo audio signals. It takes one balanced or unbalanced stereo input and distributes the signal simultaneously to ten stereo outputs (five balanced and five unbalanced).
The 907 is a high-performance power amplifier for line-level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and delivers 40 watts per channel into an 8 ohm load.
UHD Signage player with Platform SSSP 6.0, WiFi embedded - open
The VM-2Hxl is a distribution amplifier for HDMI signals. The unit reclocks and equalizes the signal and distributes it to two identical outputs.
Wide Band Analog Video / Sync Disctribution Amplifier. A 20% restocking fee applies to all product returns.
The TX-VLA1 is the ideal choice in installations where video signals are being fed into long cables, or where a low video signal needs to be amplified. The unique power supply input allows the TX-VLA1 to be powered from a wide variety of existing ac or dc power sources.
The RU-VA2 is the optimum choice where connectorized, rack-mounted video attenuation is needed. This unit features two separate, passive isolated channels. A single input jack is provided for each attenuator. The output jack is intended to be connected to a 75 Ohm terminated load. A front-panel knob is provided to adjust hot video levels down to the...
The FP-SPR1 SPDIF Repeater & Amplifier is single-channel module designed to perform conversion between SPDIF connector types and recovery of low SPDIF signal levels. It features an input and output for each conventional SPDIF format: BNC, phono, and optical. Only one of the three outputs or a combination of the coaxial and optical outputs may be used...
Passive splitter for the Fohhn Net control network on 4 × RJ-45
The EZ-VDA3B is a composite video distribution amplifier with three outputs. The input and outputs are all 75 Ohm on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and equalization trimmers may be adjusted to restore picture clarity. Includes worldwide power supply (specify plug).
The 105VB is a high-performance distribution amplifier for composite video signals. It takes one input, provides correct buffering and isolation and distributes the signal to five identical outputs.
HD/SD SDI Distribution Amplifier/Repeater, 1X4, EQ, 143Mb-1.5Gb
The VM-3VN is a distribution amplifier for composite video signals. The unit takes one input, provides correct buffering and isolation and distributes the signal to three identical outputs.
The VP-840 is a 1x4 HDMI Distribution Amplifier featuring the capability to repeat HDMI source to 4 displays simultaneously
Délai habituel entre 3 et 4 semaines
The 104LN is a high-performance line amplifier for composite or SDI video signals. It includes differential circuitry to help eliminate noise often found on the input cable in a long run.
The VM-3AN is a high-performance distribution amplifier for balanced stereo audio signals. The unit takes one stereo input and distributes the signal to three identical outputs.
The VP-200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.
The 105A is a high-performance distribution amplifier for unbalanced stereo audio signals. It takes one stereo input and distributes the signal to five identical stereo outputs.
The EZ-VDA2B is a composite video distribution amplifier with two outputs. The input and outputs are all 75 Ohm on BNC connectors. If the outputs are connected to long coaxial cables (typically 100 to 1000 feet) the front-panel gain and equalization trimmers may be adjusted to restore picture clarity. Includes worldwide power supply (specify plug).
The PT-102SN is a high-performance video distribution amplifier for s-Video (Y/C) video signals. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.
The PT-102VN is a distribution amplifier for composite video or SDI signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs.
The VP-200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.
The VP-200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.
The AVN-GPS5 is a GPS receiver antenna with a 5m lead and is supplied with an adhesive pad. It is ideal for use with the Sonifex AVN-GMCS.
This Autocue 1x2 HDMI Splitter divides a single HDMI signal between two teleprompters with HDMI ports. Easily set up the splitter in your studio thanks to the included HDMI cable.
GPS Receiver Extension Lead, SMA M to F
Replacement 12V 1A PSU for MG-DA-618
Délai habituel entre 2 et 3 semaines
Replacement 5v, 1A Locking PSU; for 1T-SX-654, MG-DA-612, MG-DA-614
Délai habituel entre 2 et 3 semaines