Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Projection Attachment with 19 degree Lens (FM Mount)
1 pièce (s) en stock
Sola ENG Softbox (with Diffuser Filter) and Bag
1 pièce (s) en stock
Falcon Eyes Accessory Set LA-K7 for Mini Fresnel
1 pièce (s) en stock
It can be either fitted clipped on the fixture or spaced away, by adding extension cords to be ordered separately.
Délai habituel entre 2 et 3 mois
Separate Vari-White & Colour LED LIGHT ENGINE (White Light is produced with Warm and Cold White LEDs offering 2.700 to 6.500 °K Enhanced CRI >95. The colour engine uses separate LED for Red, Green Blue and Amber colours.
Délai habituel entre 2 et 3 mois
LED Retrofits for De Lux 6 Fluorescents
Délai habituel entre 2 et 3 mois
Nova P600c Light
The Nanlux Parallel Beam Reflector features a narrow 6° beam angle, creating a nearly parallel beam of light. This focused beam is ideal for scenarios where precise light placement is crucial, effectively minimizing light loss due to scattering. As a result, you can achieve maximum light efficiency, ensuring that every lumen is used to its fullest potential.
Complete wide-angle imager with iris module and 70mm projection lens. Fits SERIES 1200 and DLED12 / DLED30 focusing light heads.
Délai de livraison de 4 à 6 semaines
Complete wide-angle imager with universal module and 70mm projection lens. Fits SERIES 1200 and DLED12 focusing light heads
Délai de livraison de 4 à 6 semaines
the same retrofit is good for both Analog and DMX De Lux version
Délai habituel entre 2 et 3 mois
SOFT LED 2 Vari White 90-250V 120W Vari White from 2800 to 6600 degree K Enhanced CRI >95 , M.O. DMX
Délai habituel entre 2 et 3 mois
Complete wide-angle imager with framing-shutter-blade module and 70mm projection lens. Fits SERIES 1200 and DLED12 focusing light heads
Délai de livraison de 4 à 6 semaines
to convert De Lux versions analog or non dim to LED and to DMX
Délai habituel entre 2 et 3 mois
Parallel Beam intensifier LED monocolor, 21cm diameter. Fits: DLED12-D, DLED30-D. May be used with DPBA-21HON honeycomb
Capture soft images with hardly any shadow when using your Orbiter light with this Orbiter Bag-o-Light from ARRI. This tubular diffuser mounts onto the standard 15° Open Face optic and can be inflated by an optional pump or by your own breath. Its internal mirror reflection design provides soft, virtually shadow-free light onto your subject.
to convert De Lux versions analog or non dim to LED and to DMX
Délai habituel entre 2 et 3 mois
Take advantage of the flexibility the NL Mount Projection Attachment for Evoke Series from Nanlux will bring to your productions. Featuring zoom and focus compatibilities, this projection attachment enables highly precision lighting with maximum light shaping control.
Complete imager with iris module and 150mm projection lens. Fits SERIES 1200 and DLED12 / DLED30 focusing light heads.
Délai de livraison de 4 à 6 semaines
the same retrofit is good for both Analog and DMX De Lux versions
Délai habituel entre 2 et 3 mois
FL-35YK-S Fresnel Lens with Trolley Case
Led Array for F14HP VW
Délai habituel entre 2 et 3 mois
Chimera Dome L for Orbiter
DoPchoice Dome L for Orbiter
Chimera Lightbank M for Orbiter
The kit is lightweight and includes a 15°, 30° and 60° Open Face optic. The optics are packed in a robust bag with reinforced corners, all around-velcro fastenings and adjustable shoulder strap.
Fresnel Lens
Chimera Lightbank S for Orbiter
Chimera Dome M for Orbiter
DoPchoice Dome M for Orbiter
DoPchoice Dome S for Orbiter
Compact fresnel with Bowens Mount, designed for the STORM 1000c and 1200x
Nanlux has put together this Reflector Kit for Evoke 2400B to offer you options for both a narrower and wider beam spread when using your Evoke 2400B fixture. The kit includes a 30° reflector for a moderate spot and a 60° reflector for a wide beam spread.
Led Array for F10hp VW
Délai habituel entre 2 et 3 mois
Led Array for F10HP T/F14 T/F14HP T
Délai habituel entre 2 et 3 mois
Led Array for F10HP D/F14 D/F14HP D
Délai habituel entre 2 et 3 mois
Parallel Beam intensifier for Classic sized light heads, 14cm diameter. Fits: DLED7-BI, DLED4-D/-T/-BI, DLH4, DLH200D. May be used with DPBA-7HON honeycomb
Chimera Lightbank Daylite Junior Plus "S", incl. 3 front screens (8225)
The Nanlite Projection Attachment for Bowens Mount with 19° Lens allows you to achieve complex and bold lighting effects using lights that have a Bowens mount, such as the Nanlite FS Series and larger Forza monolights. The Projection Attachment dramatically increases the output of the light you use it with.
Délai habituel entre 3 et 6 semaines
The Nanlite Projection Attachment for Bowens Mount with 36° Lens allows you to achieve complex and bold lighting effects using lights that have a Bowens mount, such as the Nanlite FS Series and larger Forza monolights. The Projection Attachment dramatically increases the output of the light you use it with.
Délai habituel entre 3 et 6 semaines
Base Driver for S8-S8XL-S12-S36 VW+C
Délai habituel entre 2 et 3 mois
CILINDRICAL SKIRT for Space Light
Délai habituel entre 2 et 3 mois
Master Driver Board VariWhite for F10SHP, F14HP - S8 - S8XL
Délai habituel entre 2 et 3 mois
Driver Board VariWhite for F6 - F7 - F10 - F10HP - F14HP - S1XL - S2 - S2XL - S4 - S8 - S8XL
Délai habituel entre 2 et 3 mois
Driver for F4.7 Variwhite
Délai habituel entre 2 et 3 mois
Asymmetric universal projection attachment/imager for DLED2 and DLED3 LED light heads. Incl. DPL60M lens.
Délai de livraison de 4 à 6 semaines
Asymmetric projection attachment with built-in framing shutter blades for DLED2 and DLED3 LED light heads. Incl. DPL60M lens.
Délai de livraison de 4 à 6 semaines
Chimera Lightbank Video Pro Plus "S", incl. 3 front screens (8125)
Intensifier for SOFT LED 8XL fixtures
Délai habituel entre 2 et 3 mois
Base Driver for Fresnels & S2-S2XL-S4 VW+C
Délai habituel entre 2 et 3 mois
Additional 4CH Driver for Fresnels + S2-S2XL-S4 VW+C
Délai habituel entre 2 et 3 mois
This 30° Reflector from Nanlux is a specifically designed modifier with an NL mount for the Evoke 2400B. The reflector produces a high output and a directional beam of 60°. Nanlux includes a fabric-covered drum case for convenient storage, protection, and transportation.
Control Panel for Orbiter
Barndoor for SOFT LED 8XL fixtures
Délai habituel entre 2 et 3 mois
Intensifier for SOFT LED 8XL fixtures
Délai habituel entre 2 et 3 mois
Single Board for Softled VW+C
Délai habituel entre 2 et 3 mois
Asymmetric universal projection attachment/imager for DLED2 and DLED3 LED light heads. Please order projection lens separately. (DPL30M / DPL50M / DPL60M / DPL85M)
Délai de livraison de 4 à 6 semaines
Asymmetric projection attachment with built-in framing shutter blades for DLED2 and DLED3 LED light heads. Please order projection lens separately (DPL30M / DPL50M / DPL60M / DPL85M)
Délai de livraison de 4 à 6 semaines
Projection Attachment with 19 degree and 36 degree Lens (FM Mount)
Délai habituel entre 3 et 6 semaines
Driver 1 Channel 3A for F4.7 - F6 - F7 - F10 - S1 - S2 - S4 - S1XL - S2XL
Délai habituel entre 2 et 3 mois
Cyclorama HOOD for asymmetrical emsission of SOFT LED 8 fixtures to illuminate backgrounds & cycs.
Délai habituel entre 2 et 3 mois
CPU Board VariWhite for F6 - F7 - F10 - F10HP - F14HP - S1XL - S2 - S2XL - S4 - S8 - S8XL
Délai habituel entre 2 et 3 mois
Add a third-party accessory such as a projection, Fresnel, or cyc optic to your Orbiter light with this black Orbiter Docking Ring from ARRI. While ARRI brand Orbiter accessories don't require a docking mount, this docking ring allows you to mount other third-party extensions onto the light using a quick and easy mounting process.
Intensifier for SOFT LED 8 fixtures
Délai habituel entre 2 et 3 mois
CPU and display for F4.7 - F6 - F7 - F10 - F14HP - S1 - S2 - S4 - S8 - S1XL - S2XL - S8XL
Délai habituel entre 2 et 3 mois
Open Face Optic 15 degree Single for Orbiter / Carton Box
CPU for VW+C
Délai habituel entre 2 et 3 mois
Parallel beam intensifier for DLED2 and DLED3
Front Adapter & Shutter Barrel for Piccoletto Flex Profile Function
Délai habituel entre 2 et 3 mois
10 ° Lens for FM Mount Projection Attachment
Délai habituel entre 3 et 6 semaines
Driver-PSU for F4.7-s1 Fixed White
Délai habituel entre 2 et 3 mois
Parallel beam intensifier for DLED4, DLED7, DLH4 and DLH200D
The Dual Head Yoke for the Nova P600c allows users to stack two Nova P600c lamp heads and mount them to a single durable aluminium frame, making it easy to operate them simultaneously for a high power 2 x 2 soft light fixture with 1200W of RGBWW output.
Designed for studio use and permanent installations, this Aputure Pole Operated Yoke allows you to mount the Nova P600c LED Panel to a lighting grid. By rotating the knobs affixed to the yoke, the pan and tilt axes of the fixture can be independently adjusted for 360 degrees rotation.
Additional 2CH Driver for S8-S8XL-S12-S36 VW+C
Délai habituel entre 2 et 3 mois
Pole Operated Stirrup with B.S. spigot for SOFT LED 8XL fixtures
Délai habituel entre 2 et 3 mois
Pole Operated Stirrup with DIN spigot for SOFT LED 8XL fixtures
Délai habituel entre 2 et 3 mois
Barndoor for SOFT LED 8 fixtures
Délai habituel entre 2 et 3 mois
This 60° Reflector from Nanlux is a specifically designed modifier with an NL mount for the Evoke 2400B. The reflector produces a high output and a directional beam of 60°. Nanlux includes a fabric-covered drum case for convenient storage, protection, and transportation.
Cyclorama HOOD for asymmetrical emsission of SOFT LED 4 fixtures to illuminate backgrounds & cycs.
Délai habituel entre 2 et 3 mois
Imager projection attachment with built-in framing shutters and 85 mm lens
Délai de livraison de 4 à 6 semaines
Astra 1x1 DMX (RJ-45) Communications Module
PSU for F10-F14-S8-S8XL VW
Délai habituel entre 2 et 3 mois
Nanlite PJ-BM-LENS-19 is a 19 ° interchangeable lens dedicated to Nanlite PJ-BM Projection Attachment (which is sold separately). This lens provides a tighter beam and greatly increases the brightness of the attached light. While extra power is a huge bonus, the biggest benefits are the endless creative possibilities it offers.
Délai habituel entre 3 et 6 semaines
Imager projection attachment with 85 mm lens
Délai de livraison de 4 à 6 semaines
Intensifier for SOFT LED 1XL fixtures
Délai habituel entre 2 et 3 mois
Pole Operated Stirrup with DIN spigot for SOFT LED 8 fixtures
Délai habituel entre 2 et 3 mois
Intensifier for SOFT LED 2XL fixtures
Délai habituel entre 2 et 3 mois
Pole Operated Stirrup with B.S. spigot for SOFT LED 8 fixtures
Délai habituel entre 2 et 3 mois
Nanlite PJFMM36 Projector Attachment Mount for Forza 60/60B with 36 degree Lens. The Nanlite Forza 60/60B Projector Mount with 36 degree Lens. Enables complex and bold lighting effects and increases the light output while still maintaining a smooth, even beam with minimal fall-off. Includes 4x Gobos, Gobo Frame and Gel Frame.
Délai habituel entre 3 et 6 semaines
Projection attachment with built-in framing shutter blades for DLED2 LED light heads. Includes 60mm lens
Délai de livraison de 4 à 6 semaines
Nanlite PJ-BM-LENS-36 is a 36 ° interchangeable lens dedicated to Nanlite PJ-BM Projection Attachment (which is sold separately). This lens provides a tight beam that adapts to filming / shooting in smaller spaces and increases light intensity. While extra production is a huge bonus, the biggest benefits are the endless creative possibilities it offers.
Délai habituel entre 3 et 6 semaines
Led Array for F6 VW/F7 VW/F10 VW
Délai habituel entre 2 et 3 mois
Cyclorama HOOD for asymmetrical emsission of SOFT LED 1 fixtures to illuminate backgrounds & cycs.
Délai habituel entre 2 et 3 mois
Cyclorama HOOD for asymmetrical emsission of SOFT LED 2 fixtures to illuminate backgrounds & cycs.
Délai habituel entre 2 et 3 mois
Universal projection attachment/imager for DLED2 LED light heads. Includes steel gobo holder and 60mm lens
Délai de livraison de 4 à 6 semaines
Barndoor for SOFT LED 1XL fixtures
Délai habituel entre 2 et 3 mois
Barndoor for SOFT LED 2XL fixtures
Délai habituel entre 2 et 3 mois
Barndoor for SOFT LED 4 fixtures
Délai habituel entre 2 et 3 mois
LIGHT SPILL Protection RING for F14, with integrated Filter Frame
Délai habituel entre 2 et 3 mois