Background Support System (9' Width)
2 pieces in stock
Light / Heavy Triple Riser Kit Stand - Black
9 pieces in stock
2.8m Telescopic Operators Pole (2 Section)
1 pieces in stock
2 to 4 Ft. (610-1220mm) Light Weight Telescoping Hanger With Pipe Clamp
4 pieces in stock
1.5 to 3ft (457-914mm) Light Weight Telescoping Hanger with Pipe Clamp
4 pieces in stock
Hollywood Superflex Arm Snap-in
1 pieces in stock
1 to 2 Ft. (305-610mm) Light Weight Telescoping Hanger With Pipe Clamp
2 pieces in stock
Pump Cup - 6 inches Suction Cup with 5/8 inches Pin
1 pieces in stock
Quick Action Junior Clamp 1-1/8" Socket
1 pieces in stock
Falcon Eyes Background System B-1313 390x420 (HxW)
2 pieces in stock
Studio Rail 3.0m (Silver)
2 pieces in stock
Studio Rail 2.0m (Black)
3 pieces in stock
Matthellini Clamp - 2 inches Center Jaw
4 pieces in stock
MQ Mount for LED and Fluorescent Light Tubes
2 pieces in stock
Matthellini Clamp - 2 inches End Jaw
5 pieces in stock
Junior Wall Plate
5 pieces in stock
Corner for 1inches Square Tube
8 pieces in stock
Studio Rail Extension Bracket - Adjustable Supplied With Rail Clamps
20 pieces in stock
Double Grip Head
3 pieces in stock
Baby Grid Clamp
4 pieces in stock
Junior Pipe Clamp
23 pieces in stock
MP Swivel Eye Coupler
4 pieces in stock
Mini Matthellini
7 pieces in stock
Doughty Clamp (Black)
4 pieces in stock
Cupped Curtain Brake
11 pieces in stock
Cable Car X 5 (Steel Frame With Bearings)
1 pieces in stock
Studio Rail Adjustable Angle Bracket Supplied With Rail Clamps
1 pieces in stock
40'' Grip Arm With Hex Baby Pin - Black
2 pieces in stock
Matthellini Clamp - 6 inches End Jaw
4 pieces in stock
Baby Plate with 16 mm Swivel Spigot
11 pieces in stock
4 Wheel Car 5/8" Mini Spigot (Brake)
2 pieces in stock
Full Mini Apple Box 12 inches x 8 inches x 10 inches
4 pieces in stock
2 1/2" Grip Head (Black)
13 pieces in stock
Curtain Car X 5 (Steel Frame With Bearings)
20 pieces in stock
This holder accepts the 30 cm (12) Dedoflex diffusers and reflectors and is mounted between the stand and the light head. Weight: 180 g (6.3 oz)
15 pieces in stock
1/4-20 to 5/8inch Female Receiver
13 pieces in stock
The Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is a versatile aluminum bracket that will fit on almost any light stand. It includes two removable, reversible studs with 1/4 inch-20 threads, to adapt to light stands with top studs smaller than the standard 5/8 inch. It requires an optional shoe for use of shoe-mount flash
2 pieces in stock
Studio Rail 90 Degree Crossover Bracket Supplied With 4 X Rail Clamps
4 pieces in stock
3 inches Baby Plate
10 pieces in stock
Adapter Kit
2 pieces in stock
Able to support up to 6.6 lb, the 3/8inches ARRI-Style Anti-Rotation Adapter from Manfrotto is compatible with the 244 Mini and Micro Arms. It features a widely used connection in the video and cinema industries regularly found on camera housing rigs, monitors, LED lights, and tripods. The adapter has a knurled tightening knob, 3/8 inches -16 male...
1 pieces in stock
The C4461 MP Coupler with 1 1/8" (28mm) Spigot is ideal suspending lights from pipe lengths or trussing in theaters, on film sets or public venues
2 pieces in stock
2 1/2" Grip Head W/ Big Handle - Silver
1 pieces in stock
Studio Rail Ceiling Bracket 25mm High (Top Hat) Supplied With Rail Clamps
18 pieces in stock
Studio Rail Ceiling Bracket 50mm High (Top Hat) Supplied With Rail Clamps
9 pieces in stock
6 inches Pin with Collar
4 pieces in stock
Adapter 3/8inches to 1/4inches for Micro Grip
18 pieces in stock
Super Clamp In Box (Bulk)
14 pieces in stock
Baby plates allow for the quick mounting of fixtures in places where light stands and clamps cannot be used
12 pieces in stock
To mount on tubes and boards. Also useful as a holding clamp on tripods and fixtures
10 pieces in stock
16mm receptacle (female) to hot-shoe mount adapter (female). Fits DLED2HSM and DLED2YHSM light heads.
1 pieces in stock
The Manfrotto 143BKT Camera Platform is a replacement camera platform for the Magic Arm. It has a standard 1/4-20 inch thread mount for a small camera
5 pieces in stock
16mm Male Adapter 5/8"with 17mm
4 pieces in stock
Studio Rail Studio Rail Joiner Kit (Black)
10 pieces in stock
Baby Pin Adapter 5/8" Female to 1/4-20" Male
11 pieces in stock
Hot Shoe Adapter 3/8inches to 1/4inches
25 pieces in stock
Studio Rail Studio Rail Joiner Kit (Silver)
1 pieces in stock
Fork attachment for styrene gobos: supplied with 1/4In and 3/8In female attachment
11 pieces in stock
The Avenger C1000 Drop Ceiling Scissor Clamp is used to mount a small to medium size light fixture from a drop ceiling frame. It terminates in a standard 5/8" Baby stud.
9 pieces in stock
Spring Clamp, Universal clamp with 5/8 '' socket
9 pieces in stock
Female shoe adapter to 1/4 male
6 pieces in stock
Doughty Rail - Joint Kit (Includes Joint Pin)
2 pieces in stock
For lighting units, cameras, etc. With foam shell and grip shape. Connection thread 1/4" with washer made of elastic plastic, tripod thread 1/4". Includes snap-hook with key-ring and fixture for tripod thread
8 pieces in stock
Falcon Eyes Wall Mount FA-027B H 12 cm
4 pieces in stock
With 1/4 and 3/8 mounting threads. For use with stands, clamps and other mounting devices with 16 mm standard sleeve. Pin is mounted to the light and is inserted into the 16 mm sleeve of the stand or mounting accessory.
15 pieces in stock
The PavoTube II Transparent Polycarbonate T12 Clip with Magnetfrom Nanlite is the waterproof end cap thet prevents water damage and allows the tube to be submerged when using the optional transparent waterbag.
2 pieces in stock
Doughty Rail - Wall Bracket
4 pieces in stock
Studio Rail Spare Joint Pins X 5
5 pieces in stock
The Mafrotto Standard Stud with 3/8" Screw snaps into a Super Clamp socket. It has a 3/8" screw thread at its other end. Use it directly with equipment that features a 3/8" socket, or with a camera head
10 pieces in stock
Doughty Rail - Slide in End Stop
1 pieces in stock
Female 1/4-20 to Male 3/8 inch Thread Adapter
1 pieces in stock
Falcon Eyes Suspended Clamp CL-C35
10 pieces in stock
Doughty Rail - Channel Nut - (M6 Unistrut Nut)
44 pieces in stock
Device for retro-digitizing sensitive historical books and documents in critical condition, especially for books that cannot be opened more than 45°.
Litemover
Usually ships within 4 to 6 weeks
Heavy-duty copy stand for analogue and digital image capturing work with two-level motor-driven adjustment. Accepts originals up to 100 x 80 cm (39.4 x 31.5 in.). Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales
Max
Usually ships within 4 to 6 weeks
Profoto offers three special light bars in 70cm, 130cm, and 190cm lengths. All are 10cm wide and offer a very even light distribution to create homogeneous highlights. This Large Striplight is equipped with three separate lamp cables, which allow distribution of the light differently for graduation control.
Professional floor stand for reprography of the rePRO system. Camera stand with motorized height adjustment via PC/laptop or wired remote control
Heavy-duty copy stand for analogue and digital image capturing work with motor-driven height adjustment. Extremely sturdy column, made of a multi-section special extrusion, black anodized, with printed cm and inch scales
Complete kit for large studios composed of 2 fixed rails 5m long, 3 mobile rails 3m long and supports for 5 light sources (4 Top Pantographs)
Usually ships within 4 to 8 weeks
Lazy Suzy
Usually ships within 4 to 6 weeks
Track Drive - Electric - Track Mounted
Complete kit for medium-sized studios composed of 2 fixed rails 4m long, 2 mobile rails 3m long and supports for 3 light sources (3 Top Pantographs)
Usually ships within 4 to 8 weeks
Dutti Dolly Rental Kit (Black)
Usually ships within 4 to 6 weeks
Sixtrack Points System
Made of special aluminum tube, black anodized, with printed cm and inch scales. Height adjustment motorized, with two speeds. Cable remote control
Profoto offers three special light bars in 28, 51 or 75" lengths. All are 10cm wide and offer a very even light distribution to create homogeneous highlights. The Profoto StripLights can be used with all Acute2, D4, Pro-7 and Pro-B2 power packs. A power supply for this flash head is required.
Complete kit for small studios composed of 2 fixed rails 3m long, 2 mobile rails 3m long and supports for 3 light sources (1 Top Pantograph and 2 Telescopic Post)
Usually ships within 4 to 8 weeks
Special version, built on order only. Delivery times on request. Motorized yoke for 650 Watt light head, separate DMX control box incl. PSU. 650 Watt light head not included (DLH650 / DLH650-DMX).
Delivery time of 4 to 6 weeks
Special version, built on order only. Delivery times on request. Motorized yoke for 650 Watt light head, separate DMX control box incl. PSU. 650 Watt light head not included (DLH652T / DLH652T-DMX)
Delivery time of 4 to 6 weeks
The Ossium Ladder Kit with Lift Bar from Quasar Science is a slim and versatile light-hanging system for mounting LED tube lights, such as the Quasar Science Rainbow. Made to be hung from overhead, the system is composed of pipes, wires, and brackets that allow you to hang up to 16 tube lights to make one large array.
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales. Camera carrier made of aluminum section, can be horizontally adjusted over approx. 25 cm (9.8 in.) with rack-and-pinion parallel guides
Motorized Background Expan Drive Kit for 4 Backgrounds
Usually ships within 4 to 8 weeks
Foba's Cmbitube System is the build-anything, rig-anything, hold-anything solution to hundreds of studio problems. Dozens of tubes, connectors, clamps and stands can be combined in an infinite variety of ways.
Motorised expan 220V composed by control box, holder for four backgrounds, main power cable (European), and four background roll supporting spigots
Usually ships within 4 to 8 weeks
Height adjustment motorized, with two speeds. Cable remote control. Constant adjustment speed, independent of load. Automatic end switch by magnet sensor
16m Overlap Track Kit
The CAM Tank Mount from Matthews is used with all large format camera plates or directly mounts to any large or medium format camera equipped with 3/8"-16 mounting holes.
Usually ships within 4 to 6 weeks
A cast iron wall mounted worm gear winch for heavy duty theatre applications.
15m Overlap Track Kit
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales
14m Overlap Track Kit
Dutti Dolly (Black, 20 x 24")
Usually ships within 4 to 6 weeks
13m Overlap Track Kit
12m Overlap Track Kit
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales
To be inserted in the 5615 table frame. Illuminated area 48 x 43 cm (18.9 x 16.9 in.), glass cover plate. Total working area 80 x 60 cm 31.5 x 23.6 in.) Lamps: 4 x 55 W. Built-in fan cooling, no thermal load on originals
Mini Max
Usually ships within 4 to 6 weeks
11m Overlap Track Kit
15.0m Line Operated Six Track Kit
10m Overlap Track Kit
14.0m Line Operated Six Track Kit
Hand-cranked, rack-and-pinion height adjustment, additionally counter-balanced by a built-in coil spring. Blocking screw to stop accidental changing of height
9m Overlap Track Kit
13.0m Line Operated Six Track Kit
Pantograph 5 Spring X 5.0m (36kg Swl)
The Foba Combitube Midi Kit is a versatile studio or location grip kit. The heart of the Foba Combitube system is the tube itself. The combitubes are made of aluminum and have a non-reflective matte black surface. The unique cone connectors allow you to connect an unlimited number of combitubes.
12.0m Line Operated Six Track Kit
Pantograph 5 Spring X 4.0m (36kg Swl)
11.0m Line Operated Six Track Kit
8m Overlap Track Kit
A cast iron wall mounted worm gear winch for heavy duty theatre applications.
Vee Clamp
7m Overlap Track Kit
10.0m Line Operated Six Track Kit
Column made of special aluminum multisection tubing, matt black anodized, with cm and inch scales
Focusing LED light head, Bicolor incl. DMX power supply with digital display for Kelvin values, studio edition(90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
Pantograph 4 Spring X 4.0m (27kg Swl)
15.0m Walk Along Six Track Kit
The Manfrotto 425B Mega Boom is the largest boom in the Manfrotto line. Movements including pan, tilt and rotation, as well as the telescopic extension of the boom arm are controlled by smooth-operating geared crank handles. This two section Mega Boom has a 12' (3.6 m) maximum extension. It has dual receptors Junior (1-1/8") and Baby (5/8")
Usually ships within 4 to 8 weeks
Easydeck Ramp System (500mm-750mm)
Pantograph 3 Spring X 5.0m (20kg Swl)
6m Overlap Track Kit
Easydeck Ramp System (250mm-500mm)
The Foba Combitube Mini Kit is a versatile studio or location grip kit. The heart of the Foba Combitube system is the tube itself. The combitubes are made of aluminum and have a non-reflective matte black surface. The unique cone connectors allow you to connect an unlimited number of combitubes.
14.0m Walk Along Six Track Kit
9.0m Line Operated Six Track Kit
Mastermount Cart Mount System
Usually ships within 4 to 6 weeks
Easydeck Ramp System (0mm-250mm)
5m Overlap Track Kit
Focusing LED light head, Bicolor incl. power supply, studio edition (90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
2.5m Meat Rack
12K Extension Ear (set of 3)
Usually ships within 4 to 6 weeks
Pantograph 2 Spring X 5.0m (12kg Swl)
Compact Tank Trap Transporter Trolley
8.0m Line Operated Six Track Kit
13.0m Walk Along Six Track Kit
Pantograph 3 Spring X 4.0m (20kg Swl)
Line operated track kits with overlap include all the components required to install your chosen track length.
A cast iron wall mounted worm gear winch for heavy duty theatre applications.
With aluminum die-cast base for 5612 column. Demountable steel tube construction. Stacking tray 80 x 50 cm (31 x 20 in.) Height-adjustable feet
The Mini Boom Rolling Kit from Matthews enables you to reposition your key light effortlessly throughout your shoot.
Usually ships within 4 to 6 weeks
12.0m Walk Along Six Track Kit
Pantograph 4 Spring X 3.0m (27kg Swl)
OPERATING POLE for MOTORIZED TOOL HBDTK
Usually ships within 2 to 3 months
Hi-Hi Overhead Roller Stand with Rocky Mountain Leg
Usually ships within 4 to 6 weeks
MAX 720 Pipe Adapter
Usually ships within 4 to 6 weeks
CT70 90° radius 3 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
CT70 90° radius 2,855 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
7.0m Line Operated Six Track Kit
Pantograph 2 Spring X 4.0m (12kg Swl)
Wheeled table for RSP Xtra (5711) copy stand. Sturdy steel tube construction, lower rods with additional track rollers for sliding on the RSP Xtra copy stand base
DLED4 special LED light head - UV 400 nm wavelength technology, "black-light" - slightly UV-A radiation
Delivery time of 4 to 6 weeks
Pantograph 4 Spring X 2.20m (27kg Swl)
OPERATING POLE for MOTORIZED TOOL HBDTK
Usually ships within 2 to 3 months
11.0m Walk Along Six Track Kit
MANUAL LIGHTING OPERATING POLE
Usually ships within 2 to 3 months
The Matthews Magic Stand 2-Section Riser Column is a telescoping 4.5 to 12.5' riser. It can be added to a Combo stand as an extension or used as a portable light boom on its own.
Usually ships within 4 to 6 weeks
Hi-Hi Overhead Roller Stand
Usually ships within 4 to 6 weeks
Focusing LED light head, tungsten incl. DMX power supply, studio edition (90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
Short Link Grade 8 Chain (black)
CT70 90° radius 2 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
CT70 90° radius 1,855 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
6.0m Line Operated Six Track Kit
Focusing LED light head, Daylight incl. DMX power supply, studio edition (90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
Promount Car Mount Sysyem
Usually ships within 4 to 6 weeks
10.0m Walk Along Six Track Kit
Pantograph 3 Spring X 3.0m (20kg Swl)
MANUAL LIGHTING OPERATING POLE
Usually ships within 2 to 3 months
Big non-reflecting matt grey baseplate with printed grid, cm and inch scale. Feet adjustable in height. Spirit level in column base. Especially wide and low-vibration column made of matt black anodized aluminium tubing with cm and inch scale
Elemac to Mitchell Adapter
Usually ships within 4 to 6 weeks
Heavy Duty Tilt Headw/ Crank Handle
Usually ships within 12 weeks
Superboom Black A17+014 with 008B
Usually ships within 4 to 8 weeks
Complete ceiling rail system with four pantographs and 4m rails.
Usually ships within 2 to 4 weeks
5.0m Line Operated Six Track Kit
Ossium Frame Arrays are a strong and simple frame rigging system for use in both standard and virtual production environments.
Focusing LED light head, tungsten incl. power supply, studio edition (90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
The Pole-Op Assembly for Image L80 DMX LED Panel from Kino Flo replaces the light's standard yoke, allowing control of it from below with a pole when mounted overhead on a grid or pipe.
Delivery time of 4 to 6 weeks
This set contains a ST-1324 photo table and a SLH4-SB5050 + LH-ESB6060K daylight set. A great combo to produce professional product photos. The daylight set consists of drei lamps, to reduce shadows. The photo table contributes to a egal white background.
Usually ships within 2 to 4 weeks
Pantograph 3 Spring X 2.20m (20kg Swl)
Superboom Black A17+014 with Cine
Usually ships within 4 to 8 weeks
9.0m Walk Along Six Track Kit
MIMIK 120 Yoke Assembly
Delivery time of 4 to 6 weeks
Still Life Table without Cover
Usually ships within 4 to 8 weeks
Pantograph 2 Spring X 3.0m (12kg Swl)
10" Vacuum Cup with Swivel Head
Usually ships within 4 to 6 weeks
Focusing LED light head, Daylight incl. power supply, studio edition (90 - 264 V AC, European cable)
Delivery time of 4 to 6 weeks
Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales
IR version of DLED4.1. 860nm (requires power supply)
Delivery time of 4 to 6 weeks
CT70 90° radius 1 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
CT70 90° radius 0,855 m. Corner Section with 0,5m straight ends
Usually ships within 2 to 3 months
2-Way Tilt Plate
Usually ships within 4 to 6 weeks
Strong square tube frame fitted with height-adjustable feet at the front and lockable castors at the back. Mounting facilities for reflected and transmitted lighting
Kaiser book holder 69/50 AR for max. Original size 69 x 50 cm
Still Life Table Black without Cover
Usually ships within 4 to 8 weeks
8.0m Walk Along Six Track Kit
Junior Stand Double Riser - Rolling
Usually ships within 4 to 6 weeks
Micro Grip Master Kit
Usually ships within 4 to 6 weeks
The Pole-Op Assembly for Image L40 DMX LED Panel from Kino Flo replaces the light's standard yoke, allowing control of it from below with a pole when mounted overhead on a grid or pipe.
Delivery time of 4 to 6 weeks
For 5631 Book Cradle. Sturdy steel tube construction. Matt-grey, plastic-laminated base board 86 x 3.2 x 60 cm (33.9 x 1.3 x 23.6 in.). Can be equipped with casters or height-adjustable feet
4.0m Line Operated Six Track Kit
Celeb 400 Pole-Op Assembly
Delivery time of 4 to 6 weeks
Celeb 400Q Pole-Op Assembly
Delivery time of 4 to 6 weeks
2' Ossium Frame w/ Yoke
Pantograph 2 Spring X 2.20m (12kg Swl)
This 4' Quasar Science 4-Bank Shell with Ossium Plate gives you everything you need to control the shape of the beam while thwarting spill light using the shell's articulating doors.
Low Boy Junior Double Riser - Rolling
Usually ships within 4 to 6 weeks
Elemac to 100mm Bowl
Usually ships within 4 to 6 weeks
MAX 6' Extension Arm w/Locking Swivel Pin
Usually ships within 4 to 6 weeks
Celeb 200 Pole-Op Assembly
Delivery time of 4 to 6 weeks
Medium Overhead Roller Stand
Usually ships within 4 to 6 weeks
Pole operated yoke, fits Gemini 1x1 only
Lightweight Pantograph 3 Spring X 3.0m (C/w 16mm Spigot and Studio Rail Mount) 3 - 15kg Weight Range
Celeb 850 Pole-Op Assembly
Delivery time of 4 to 6 weeks
7.0m Walk Along Six Track Kit
Large non-reflecting, matt grey baseboard with a printed fine grid and cm/inch scale. Height-adjustable feet. Spirit level integrated into the base
Lightweight Pantograph 3 Spring X 2.0m(C/w 16mm Spigot and Studio Rail Mount) 3 - 15kg Weight Rang
This 2' Quasar Science 2-Bank Shell with Ossium Plate gives you everything you need to control the shape of the beam while thwarting spill light using the shell's articulating doors.
Ultra Boom
Usually ships within 12 weeks
VistaBeam 63 Center Mount Assembly.
Delivery time of 4 to 6 weeks
Hi-Hat Box
Usually ships within 12 weeks
Quad Gemini 1x1 Array Kit, including hardware and yoke for mounting four (4) Gemini 1x1 fixtures in a 2 by 2 (2 wide by 2 high) configuration
For wall mounting the 5612 column and the columns of 5710/5711. Lower part with base, spirit level and compartment for power supply. Top section adjustable for vertical column positioning. Screws and dowels included
With RT 1 copy and titling arm with two camera mounting points for portrait and landscape formats. Mounting the camera on the inside of the camera carrier for landscape format produces images which are not upside-down. This is very convenient for comic, animation and stop-motion films
Mini Telescope. Manual lighting Suspension with Compensated LOAD System. Suggested for hanging heights up to 4,5 m.
Usually ships within 2 to 3 months
Bolton Twill Curtain Valance 750mm Drop X 6mtr Long
Focusing LED light head, tungsten
Delivery time of 4 to 6 weeks
Superboom Black A17+014 without stand
Usually ships within 4 to 8 weeks
180mm Standard Pulley (Quin Sheave) (Rope)
180mm Standard Pulley (Quin Sheave) (Wire Rope)
Stage Clamp, 28mm Socket Set, 10
Usually ships within 4 to 8 weeks
For converting RS1 system and RSD (5602), RSD mot (5603) copy stands from table to free-standing model. Also suitable for all Kaiser baseboards from 45 x 50 cm to 60 x 80 cm (17.7 x 19.7 in. to 23.6 x 31.5 in.). Height-adjustable feet. Slide-in compartment for control box of optional lighting unit
6.0m Walk Along Six Track Kit
Track Drive - Hand Operated - Floor Mounted
Pole Operated yoke, fits Gemini only
The Falcon Eyes B-3030C Ceiling Rail System is complete with 4 Pantographs and is ideal for a photo studio.
Usually ships within 2 to 4 weeks
This 4' Quasar Science 4-Bank Shell with Ossium Plate gives you everything you need to control the shape of the beam while thwarting spill light using the shell's articulating doors.
Connects two Gemini units together side by side, includes yoke
Connects four Gemini units together, includes yoke
Soft bag kit, including 3x DSTM stands and 2x DSTFX40 flexible stand extensions. This stand kit completes all the SLEDM-Kits.
Delivery time of 4 to 6 weeks
Lightweight Pantograph 3 Spring X 3.0m (C/w 16mm Spigot and Receiver) 3 - 15kg Weight Range
Elemack To Mitchell Adapter 6"
Usually ships within 4 to 6 weeks
Light Boom 35 Black A25 with Cine
Usually ships within 4 to 8 weeks
The Auroris Truss Ladder is the ideal solution when building a custom light box. Constructed of a lightweight alloy with a brushed aluminum finish, this frame gives rigidity to your overhead truss system.
Lightweight Pantograph 3 Spring X 2.0m(C/w 16mm Spigot and Receiver) 3 - 15kg Weight Range
Fits on top of the RSP 2motion stand base board. For holding originals up to size A0 with magnetic holders (not included)
This set contains a ST-1020A photo table and a LH-ESB6060K daylight set.
Usually ships within 2 to 4 weeks
Ball Head Assembly w/ 10inches Suction Cup
Usually ships within 4 to 6 weeks
with RA 1 camera arm with interchangeable threaded bush 1/4/ 3/8 and camera adjustment device. Maximum load: 4 kg (8.8 lbs.)
Superboom Black A17+014 without Stand
Usually ships within 4 to 8 weeks
TV Bracket 42"
Tripple stud boom with sliding receptacle. Length 42 cm.
Delivery time of 4 to 6 weeks
Connects two Gemini units together, includes yoke
Bolton Twill Curtain Valance 500mm Drop X 6mtr Long
Baby Jr. Triple Riser
Usually ships within 4 to 6 weeks
Studio Rail 80 Curve Radius 150cm, Silver
Trailer Hitch Adapter
Usually ships within 12 weeks
For wall mounting of a RD column. Lower part with base, spirit level and compartment for power supply. Top section adjustable for vertical column positioning. Screws and dowels included
This 2' Quasar Science 2-Bank Shell with Ossium Plate gives you everything you need to control the shape of the beam while thwarting spill light using the shell's articulating doors.
TV Bracket 37"
Baby Jr. Double Riser
Usually ships within 4 to 6 weeks
Studio Rail 80 Curve Radius 135cm, Silver
5.0m Walk Along Six Track Kit
Track Drive - Hand Operated - Wall Mounted
200mm Heavy Duty Pulley (Quin Sheave) (Wire Rope)
200mm Heavy Duty Pulley (Quin Sheave) (Rope)
Studio Rail 80 Curve Radius 120cm, Silver
Telescoping Hanger Double Extension 5 to10 Ft.
Usually ships within 4 to 6 weeks
Mitchell to Elemac Adapter
Usually ships within 4 to 6 weeks
180mm Standard Pulley (Quad Sheave) (Wire Rope)
180mm Standard Pulley (Quad Sheave) (Rope)
Box Shelve - Silver
Usually ships within 12 weeks
TV Bracket 32"
Falcon Eyes Photo Table ST-1324 130x240
Usually ships within 2 to 4 weeks
Infinity Arm Kit
Usually ships within 4 to 6 weeks
The Tank Trap Trolley is a compact trolley to transport and store ten 3 Position Tank Traps.
Grip Helper Junior - Black
Usually ships within 4 to 6 weeks
Allows Gemini 2x1 to stand on floor
Articulating ball mount with junior pin, fits Gemini 2x1 to junior stand
Soft bag stand kit, including 4x DST stands. This stand kit completes all the SLED2x2-Kits.
Delivery time of 4 to 6 weeks
Studio Rail 80 Curved Radius 105cm, (Silver)
Euro Mount Female to 150mm
Usually ships within 12 weeks
Platform for Image Mobile Station
Usually ships within 12 weeks
Black chrome plated steel stand. 4 sections, 3 risers. 1 levelling leg. There is a reason we call this the super stand! Incredible reach of 477cm that can support fixtures up to 40kg
Usually ships within 4 to 8 weeks
Swivel Truss Adapter W/ 2" Couplers & Junior Pin
Usually ships within 12 weeks
Powers Gemini 2x1 with 2 Gold Mount 14.4V Batteries
Powers Gemini 2x1 with 2 V Mount 14.4V Batteries
Camera carrier turns ± 90° and can be blocked in every position. With spirit level for fine adjustment. Camera mount horizontally adjustable via parallel guides with fine adjustment
150mm Standard Pulley (Quin Sheave) (Rope)
150mm Standard Pulley (Quin Sheave) (Wire Rope)
Auroris Ladder Truss, 1.5 m
Telescoping Hanger Double Extension 4 to 8 Ft.
Usually ships within 4 to 6 weeks
Extension Ear (Set for 3)
Usually ships within 12 weeks
Euro Mount Female to Mitchell
Usually ships within 12 weeks
Pole Operated Yoke for Astra 1x1 - for tilt and panning control of ceiling-mounted Astra 1x1 fixtures with a dedicated pole.
Trolley Chassis With Castors (Pair)
Auroris Truss Corner
Dual Gemini 1x1 Array Kit, including hardware and yoke for mounting two Gemini 1x1 fixtures side by side.
4.0m Walk Along Six Track Kit
With two camera carriers which can be adjusted separately. For mounting two cameras, e.g. for comparison shots
Followspot Rail Mount Swl 100kg
Hollywood Corners - Set of 4
Usually ships within 4 to 6 weeks
200mm Heavy Duty Pulley (Quad Sheave) (Wire Rope)
200mm Heavy Duty Pulley (Quad Sheave) (Rope)
Bolton Twill Curtain Valance 250mm Drop X 6mtr Long
Adjustable Modular Extension 2.0m to (Silver)
Adjustable Modular Extension 2.0m to (Black)
Easydeck Triple Step Module 750mm High
Optional Remote Control
MiniGrip Mounting Kit
Usually ships within 4 to 6 weeks
150mm Heavy Duty Pulley (Quin Sheave) (Wire Rope)
150mm Heavy Duty Pulley (Quin Sheave) (Rope)
Telescoping thanger Triple Extension 2-6ft
Usually ships within 4 to 6 weeks
7.4m Telescopic Operators Pole (3 Section)
Ball Head Assembly w/ 6inches Suction Cup
Usually ships within 4 to 6 weeks
Telescoping Hanger Double Extension 3 to 6 Ft.
Usually ships within 4 to 6 weeks
Celeb 850 Yoke Assembly
Delivery time of 4 to 6 weeks
Sliding Plate Set of 7
Usually ships within 4 to 8 weeks
180mm Standard Pulley (Triple Sheave) (Rope)
Studio Rail 80 4.0m (Silver) Free delivery does not apply to this product. Prices and delivery fees on request
Studio Rail 80 Curve Radius 90cm, Silver
180mm Standard Pulley (Triple Sheave) (Wire Rope)
This set contains a ST-0613T photo table and a LH-ESB5050K3 daylight set. A great combo to produce professional product photos. The daylight set consists of three lamps, to reduce shadows. The photo table contributes to an egal white background.
Usually ships within 2 to 4 weeks
Support Arm Coupler
Usually ships within 12 weeks
6-axle Background Support Kit BE-6R (electric)
Usually ships within 3 to 6 weeks
Stage Clamp Set, 20 pcs.
Usually ships within 4 to 8 weeks
150mm Standard Pulley (Quad Sheave) (Wire Rope)
150mm Standard Pulley (Quad Sheave) (Rope)
10inch Vacuum Cup w/Cheese Plate
Usually ships within 4 to 6 weeks
Set of motorized adapter with rotating 16mm stud. Contains: 1 x DMRSA16, 1 x DCSM1/4, 1 x DDCC-EXT5, 1 x DLPS-12
Delivery time of 4 to 6 weeks
Maxi Matthpole (99 inches to 187 inches) Black
Usually ships within 4 to 6 weeks
Junior Triple Header
Usually ships within 4 to 6 weeks
Followspot Rail Mount Swl 50kg
200mm Heavy Duty Pulley (Triple Sheave) (Wire Rope)
200mm Heavy Duty Pulley (Triple Sheave) (Rope)
Six Track 3 Metre 90 Degree Radius Track (3 Sections)
Elemac Mounting Plate
Usually ships within 4 to 6 weeks
Auroris Truss Eyebolt
Rack Frame 24 RU 305mm (12 Inch) Deep
Dark grey finished steel plate with die-cast base for 4407, 4475 or other R1 system columns. Receptacle for accessories (e.g. 5965, 5040) with 16 mm (0.6 in.) standard spigot, mounts on right or left side. Height adjustable feet
Doughty Universal Hanger (Junior/baby)
Double Pipe Boom Rig for Pipe 1-1/4" Sch. 40 (42.4mm)- Black
Usually ships within 12 weeks
Junior Boom Arm
Usually ships within 12 weeks
CT70 Extruded Aluminum linear rail section of 6 meters
Usually ships within 2 to 3 months
Double Pipe Boom Rig for Pipe 1-1/2" Sch. 40 (48.3mm)- Black
Usually ships within 12 weeks
Easydeck Double Step Module 500mm High
Celeb 450Q Yoke Assembly
Delivery time of 4 to 6 weeks
Studio Rail 6.0m (Black) Free delivery does not apply to this product. Prices and delivery fees on request
Background Roll Supporting Spigots
Usually ships within 4 to 8 weeks
Book Holder 44/41 for max. Template size 44 x 41 cm
Pipe-to-pipe Coupler, Black Parallel W/ T-knob ( Set of 2)
Usually ships within 12 weeks
Studio Rail 80 Curve Radius 75cm, Silver
Gimbals Doucking Bracket
Usually ships within 12 weeks
Celeb 400 Yoke Assembly
Delivery time of 4 to 6 weeks
150mm Heavy Duty Pulley (Quad Sheave) (Rope)
150mm Heavy Duty Pulley (Quad Sheave) (Wire Rope)
Mini Boom - Black
Usually ships within 4 to 6 weeks
Flexible Wire Rope 100m X 6mm (Black)
5.5m Telescopic Operators Pole (3 Section)
Menace Arm Kit for 1 1/4" Schedule 40 Aluminum Pipe Rail
Usually ships within 4 to 6 weeks
Menace Arm Kit for 1 1/2" Schedule 40 Aluminum Pipe Rail
Usually ships within 4 to 6 weeks
The Double Vertical Yoke allows for mount two SkyPanel S30 fixtures one directly above the other.
Rack Frame 20 RU 305mm (12 Inch) Deep
H Frame Assembly(Large)
H Frame Assembly(Large) (Black)
Rack Frame 12 RU 485mm (19 Inch) Deep
LiteMount with Convi Clamp (Mafer)
The Falcon Eyes ST-1020A Photo Table is a professional tool used to take shadow free, product photos. The ST-1020A is therefore suitable for advertisement or webshop product photography.
Usually ships within 2 to 4 weeks
The Falcon Eyes Background System B-8510 with Vinyl Chroma Key Green is a background system complete with a green chroma key background (2.75 x 6.09m), which is commonly used for photography and filming purposes.
Usually ships within 2 to 4 weeks
This combination is consisting out of 2 Falcon Eyes L3900GA/B Heavy Duty Light Stands, two tube clamps with spigot CL-35 and a Falcon Eyes Flag panel.
Usually ships within 2 to 4 weeks
Micro Grip Basic Kit
Usually ships within 4 to 6 weeks
Assembly Support
Usually ships within 4 to 8 weeks
Diva-Lite 41 Yoke Assembly
Delivery time of 4 to 6 weeks
Diva-Lite 31 Yoke Assembly
Delivery time of 4 to 6 weeks
Universal Tv Tilt Stand Mount
Usually ships within 12 weeks
17"X10"X1/2" Mitchell Chesse Plate Dolly
Usually ships within 12 weeks
Studio Rail 6.0m (Silver) Free delivery does not apply to this product. Prices and delivery fees on request
Heavy duty Baby Side Arm
Usually ships within 4 to 6 weeks
Easydeck Storage Dolly
Motorized adapter with rotating 16mm (5/8"). Rotating speed 5 to 30 rpm. Mounting joint with 16mm receptable. Powered by 12V power supply.
Delivery time of 4 to 6 weeks
Intensifier for SOFT LED 4 fixtures
Usually ships within 2 to 3 months
Camera platform can be shifted horizontally to left or right and and can be blocked in any position. Adjustable stops for end position of camera
Century Stand Door Rack
Usually ships within 4 to 6 weeks
Adjustable Modular Extension 1.0m to (Silver)
Adjustable Modular Extension 1.0m to (Black)
Rack Frame 8 RU 305mm (19 Inch) Deep
Monitor Mount
Usually ships within 4 to 6 weeks
200mm Heavy Duty Pulley (Double Sheave) (Wire Rope)
200mm Heavy Duty Pulley (Double Sheave) (Rope)
Celeb 200 Yoke Assembly
Delivery time of 4 to 6 weeks
Pump Cup - 10 inches Suction Cup
Usually ships within 4 to 6 weeks
Studio Rail 80 3.0m (Silver)
4.6m Telescopic Operators Pole (3 Section)
The cheese plate car seat is designed for in-car camera mounts that allow you to photograph from inside a moving car.
Usually ships within 12 weeks
Rack Frame 16 RU 305mm (12 Inch) Deep
100mm Heavy Duty Pulley (Quin Sheave) (Wire Rope)
100mm Heavy Duty Pulley (Quin Sheave) (Rope)
Camera Assistant Front Box
Usually ships within 12 weeks
Tooling Apple Box (Full) 20"X12"X8"
Usually ships within 12 weeks
Dutti Dolly Speed Wheels Set
Usually ships within 4 to 6 weeks
Dutti Dlly Grende Kit (Set Of 4)
Usually ships within 4 to 6 weeks
11" Rock's Arm
Usually ships within 12 weeks
3 Aixs Camera Mounting Plate Kit
Usually ships within 12 weeks
Falcon Eyes Camera Stabilizer VST-02
Usually ships within 2 to 4 weeks
Diva-Lite 21 Yoke Assembly
Delivery time of 4 to 6 weeks
Large Noga Arm
Usually ships within 4 to 6 weeks
3 to 6 Ft. with Pipe Clamp & Stirrup Hanger
Usually ships within 4 to 6 weeks
H Frame Assembly(Small) (Black)
H Frame Assembly(Small)
Telescopic H.28mm Pin & Bushing
Usually ships within 4 to 8 weeks
4 to 8 Ft. with Pipe Clamp & Stirrup Hanger
Usually ships within 4 to 6 weeks
150mm Standard Pulley (Triple Sheave) (Wire Rope)
150mm Standard Pulley (Triple Sheave) (Rope)
Tank Trap 3 Position
5 to 10 Ft. with Pipe Clamp & Stirrup Hanger
Usually ships within 4 to 6 weeks
Studio Rail 80 Articulated Carriage
Studio Rail 60 Curve Radius 150cm, Black (3.85 Kg)
Falcon Eyes Background System SPK-3 with 3 Rolls Black/White/Blue 1.35x11 m
Usually ships within 2 to 4 weeks
The Falcon Eyes VRG-S-2 Shoulder Support Rig is a shoulder rig designed to stabilize DSLR cameras and video cameras while shooting and filming.
Usually ships within 2 to 4 weeks
1.5 to 3 Ft. with Pipe Clamp & Stirrup Hanger
Usually ships within 4 to 6 weeks
Auroris Ground Setup Tarp, 3 x 3 m (12 x 12 ft)
150mm Heavy Duty Pulley (Triple Sheave) (Wire Rope)
150mm Heavy Duty Pulley (Triple Sheave) (Rope)
Six Track 2 Metre 90 Degree Radius Track (2 Sections)
Studio Overhead Grip Arm
Usually ships within 4 to 6 weeks
Riser & Mitchell Kit - required when using 377709 - 100mm & 377714 - 150 mm Bowl Adapters
Usually ships within 4 to 6 weeks
Studio Rail 60 Curve Radius 135cm, Black (3.51 Kg)
10" Rock's Arm
Usually ships within 12 weeks
Studio Rail 60 Curve Radius 120cm, Black (3.18 Kg)
100mm Standard Pulley (Quin Sheave) (Rope)
100mm Standard Pulley (Quin Sheave) (Wire Rope)
This 4-pack of the 8' Ossium Ladder Cable from Quasar Science is designed for use with the Ossium ladder system and allows you to attach additional LED tubes to your array.
Studio Rail 60 Curve Radius 150cm, Silver (3.85 Kg)
Wall Spreader - 2 x 4
Usually ships within 4 to 6 weeks
The Pipe Spreader from Matthews is a 2-piece system that allows positioning a pipe between two flat surfaces like ceilings or walls
Usually ships within 4 to 6 weeks
Flexible Wire Rope 100m X 5mm (Black)
Studio Rail Articulated Carriage + 3 Pt Receiver
A white transparent background acrylic-glass plate that is mounted on the Basic Support 5921 to form a concave shaped base
Short Yoke for SkyPanel S360-C (incl. Pin)
Falcon Eyes Background System Electric B-4WE for 4 rolls
Usually ships within 2 to 4 weeks
The LiteDimmer truss mount provides secure attachment of the LiteDimmer Spectrum AC600 to any 1.5" to 2" pipe.
LiteDimmer Stand Mount (kMount to Mafer)
Intensifier for SOFT LED 1 fixtures
Usually ships within 2 to 3 months
Intensifier for SOFT LED 2 fixtures
Usually ships within 2 to 3 months
Studio Rail 60 Curve Radius 105cm, Black (2.83 Kg)
4-axle Background Support Kit BE-4RS (electric)
Usually ships within 3 to 6 weeks
The Kupo Heavy Duty VESA Mount made by CNC aluminum construction, ensuring exceptional strength without compromising its lightweight design. This allows for the effortless loading of a 30kg monitor onto various support equipment such as light stands, C-Stands, or any other grip gear featuring a 5/8" (16mm) baby stud.
Usually ships within 12 weeks
Suitable for documents and originals up to 210 x 148 mm (8.2 x 5.8 in.). Two adjustable stop rails for accurate positioning of the document
Studio Rail 60 Curve Radius 135, Silver (3.51 Kg)
3.7m Telescopic Operators Pole (2 Section)
Steel Heavy Duty Baby Boom
Usually ships within 12 weeks
Catch & Release Clip Set ( Coupler for Dia. 25-30mm)
Usually ships within 12 weeks
4-axle Background Support Kit BE-4R (electric)
Usually ships within 3 to 6 weeks
Made of thickness 6mm sturdy steel plate, boom base offers a flexible method to support a 48mm vertical tube for setting the lights.
Usually ships within 12 weeks
Non-reflective matt grey baseboard with printed fine grid and cm/inch scale. Matt-black anodised aluminum section tube column with cm/inch scale
Medium Noga Arm
Usually ships within 4 to 6 weeks
Studio Rail 60 Curve Radius 120cm, Silver (3.18 Kg)
Rack Frame 12 RU 305mm (12 Inch) Deep
Three Stage Extension (1.08m - 2.50m) (Black)
Three Stage Extension (1.08m - 2.50m)
The Swan Neck Mount for Titan X2 LED Soft Light from Rotolight attaches centrally to the back of the fixture, allowing it to be rotated omnidirectionally. The mount has a 5/8" receiver for light stands with a 5/8" stud.
Usually ships within 2 to 3 weeks
180mm Standard Pulley (Double Sheave) (Wire Rope)
180mm Standard Pulley (Double Sheave) (Rope)
Braced Boom Arm 1000mm (Black)
To be inserted in the 5615 Table Frame. Dimensions (WXD): 80 x 60 cm (31.5 x 23.6 in.). High-compressed wooden material, all-side plastic-laminated, with printed grid and cm and inch scales. Includes slide-in carrier for control box of optional lighting unit
5 to 10 Ft. (1524-3048mm) Light Weight Telescoping Hanger w / Pipe Clamp
Usually ships within 4 to 6 weeks
Made of European beech, the Kupo camera cradle allows you to convert your stand or tripod into a camera docking cradle during set lighting, talent blocking, and rehearsals.
Usually ships within 12 weeks
Grip Helper-junior Black
Usually ships within 12 weeks
Rack Frame 9 RU 305mm (12 Inch) Deep
"D" RAIL DOUBLE SWIVELING TROLLEY WITH DOUBLE BRAKE, including: TOP trolley with Pole Operated brake; BOTTOM trolley with Pole; perated brake; Compatible with IPE 80 standard I beam
Usually ships within 2 to 3 months
2 to 4 Ft. with Pipe Clamp & Stirrup Hanger
Usually ships within 4 to 6 weeks
100mm Heavy Duty Pulley (Quad Sheave) (Wire Rope)
100mm Heavy Duty Pulley (Quad Sheave) (Rope)
Studio Rail Swivel Arm With 25 X 2.0m Tube
4 to 8 Ft. (1219-2438mm) Light Weight Telescoping Hanger With Pipe Clamp
Usually ships within 4 to 6 weeks
Easydeck Standard 1 Metre Module (750mm)
Matthpole (53 inches to 97.5 inches) Black
Usually ships within 4 to 6 weeks
6 in One Nesting Apple Box Set
Usually ships within 12 weeks
PanAura 7 extension arm for angled position operation
Delivery time of 4 to 6 weeks
Rack Frame 4u 305mm deep
Rack Frame 8 Ru 305mm (12") Deep
Studio Rail 60 Curve Radius 105cm, Silver (2.83 Kg)
Column Arm
Usually ships within 12 weeks
Pivoting Yoke for Matthboard - Black
Usually ships within 4 to 6 weeks
To mount and individually align cameras, lights and accessories. Mounted with reversible thread adapter on tripods and clamps with a 16 mm (0.6 in.) sleeve
200mm Heavy Duty Pulley (Single Sheave) (Wire Rope)
200mm Heavy Duty Pulley (Single Sheave) (Rope)
The DVK-380SL from Falcon Eyes is a photo table with LED lighting, which is suitable to photograph many products
Usually ships within 2 to 4 weeks
Heavy Duty Boom Arm 1000mm (Black)
Rubber Stopper Coupler
Usually ships within 12 weeks
The Manfrotto Variable Friction Magic Arm with Quick Release is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°.
Usually ships within 4 to 8 weeks
Celeb 450 Center Mount Assembly
Delivery time of 4 to 6 weeks
Falcon Eyes Flag Panel Set CR-1520K1-CR-T 150x200cm
Usually ships within 2 to 4 weeks
Studio Rail 4.0m (Black) Free delivery does not apply to this product. Prices and delivery fees on request
Grab Clamp with Universal Head
Usually ships within 4 to 8 weeks
"D" RAIL TROLLEY WITH BRAKE - for Tracking and swivelling facility of D RAIL or IPE 80 sections under 2 upper D RAIL or IPE 80 sections, including: TOP Trolley with brake; BOTTOM swivelling flange with fixing clamps for D Rail.
Usually ships within 2 to 3 months
Self-Locking Air Cushioned Light Stand, Black, 7' (2.1 m)
Usually ships within 4 to 8 weeks
HW Jr. Offset Arm
Usually ships within 4 to 6 weeks
Kit - Medium Duty Maxi Steel
Usually ships within 4 to 6 weeks