Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
French Flag for MB 450 +455-R1 foldable
Flexi-Insert-Ring - for 110mm screw-in - e.g. MB450. Light protection for lens diameter s between 50 and 85 mm.
French Flag for MB 601
Pivot Mechanism + Fixing Screws for Side Wings at MB 601 (1 pair for spare)
Flexi-Insert-Ring - for 110 mm screw-in - e.g. MB450. Light protection for lens diameter s between 75 and 98 mm
1pc. Carbon 19mm Bar, Length: 400mm
105mm to M72 Threaded XL Step-Down Ring
80mm Lens Attachment Ring for MB-T04 and MB-T06
Délai de livraison de 4 à 6 semaines
95mm Lens Attachment Ring for MB-T04 and MB-T06
Délai de livraison de 4 à 6 semaines
134mm Lens Attachment Ring for MB-T04 and MB-T06
Délai de livraison de 4 à 6 semaines
Left Side Flag for MB-T04, MB-T06
Délai de livraison de 4 à 6 semaines
Right Side Flag for MB-T04, MB-T06
Délai de livraison de 4 à 6 semaines
114mm Lens Attachment Ring for MB-T04 and MB-T06
Délai de livraison de 4 à 6 semaines
R8 Screw-In Reduction Ring 150-128 mm
R8 Screw-In Reduction Ring 150-114 mm - With internal thread for use with R4 Reduction Rings.
R8 Screw-In Reduction Ring 150-117 mm
R8 Screw-In Reduction Ring 150-120 mm
R8 Screw-In Reduction Ring 150-130 mm
R8 Screw-In Reduction Ring 150-142 mm - For Red 18-85 Zoom.
R8 Screw-In Reduction Ring 150-136 mm - For Cooke CXX - Cooke S4 180 mm and Angenieux 25-250 HR.
R8 Screw-In Reduction Ring 150-134 mm - For Master Prime Lens 150mm + Arri/Fujinon Alura Zooms.
R4 Screw-In Reduction Ring 114 mm-103 mm
Adaptor diameter 110:81 mm outer diameter MB 450
Adaptor diameter 110:91 mm outer diameter MB 450
Adaptor diameter 110:91 mm outer diameter MB 450 short shaft (e.g. for Canon 6x zoom lens)
15mm LWS Rod Adapter for MB-T12 Matte Box
Délai de livraison de 4 à 6 semaines
Protect your lens and camera filters when they are installed in your Mirage matte box with this Filter Protector Kit from Tilta. The kit features an aluminum frame and a clear glass filter, and the assembly installs onto the front of the matte box using four integrated clips. It is designed to protect your 4 x 5.6" and circular filters, as well as the...
Délai de livraison de 4 à 6 semaines
Vocas Drive Gear M0.5/75 for the Vocas follow focus MFC-1.
R4 Screw-In Reduction Ring 114 mm-94 mm - for Fujinon 14x5.8 mm (Sony EX-1 - EX-3) - Canon Xl-H1 - SonyHXR-NX5
R4 Screw-In Reduction Ring 114 mm-80 mm - for SonyHVR-V1E
R4 Screw-In Reduction Ring 114 mm-82 mm - for Canon 24-70 mm photo DSLR zoom
R4 Screw-In Reduction Ring 114 mm-87 mm
R4 Screw-In Reduction Ring 114 mm-89 mm - for SonyHDR-FX1E and HVR-Z1E
R4 Screw-In Reduction Ring 114 mm-91 mm - for SonyHVR-Z7E andPanasonic AG HVX-200
R4 Screw-In Reduction Ring 114 mm-100 mm - for Fujinon XS8x4mm (Sony EX-3) - With internal thread for use with R5 reduction rings
R4 Screw-In Reduction Ring 114 mm-95 mm WA
R4 Screw-In Reduction Ring 114 mm-96 mm
R4 Screw-In Reduction Ring 114 mm-98 mm
R4 Screw-In Reduction Ring 114 mm-105 mm
R4 Screw-In Reduction Ring 114 mm-110 mm - for Cooke S4 and LDS Cooke S4
R4 Screw-In Reduction Ring 114 mm-95 mm
Step-down Ring diameter 104:95 mm
Step-down Ring diameter 104:83 mm
Step-down Ring diameter 104:85 mm
Step-down Ring diameter 104:M82mm Fujinon screw in thread with collar for 104mm clamp.
Step-down Ring diameter 104:86 mm
Step-down Ring diameter 104:87 mm
Step-down Ring diameter 104:90 mm
Step-down Ring diameter 104:94 mm
Step-down Ring diameter 104:100 mm
Step-down Ring diameter 104:98 mm
Step-down Ring diameter 104:98,5 mm
Step-down Ring diameter 104:95mm for SD 411-53/50 to use with only 1 fh up to focal length 4.5mm
Step-down Ring diameter 104:75mm
Step-down Ring diameter 104:95 mm for CF-SS/ST to use with only 1 FH up to focal length 4.5mm
Step-down Ring diameter 104:97 mm
Step-down Ring diameter 110:87 mm - e. g. for Cooke Panchro lenses
Single rosette (Hirth) for handle on MB 565
Step-down Ring diameter 104:92 mm
Step-down Ring diameter 104:80 mm
Insertring diameter 110:80 mm (24mm tube-shaped) for telescoping photo lenses
Adapterring diameter 104:62mm (thread for Sony HVR-V1)
Insertring diameter 110:100 mm
Insertring diameter 110:85 mm
Insertring diameter 110:85 mm (22mm tube-shaped) for telescoping photo lenses.
Insertring diameter 110:86 mm - not for MB 450
Insertring diameter 110:95 mm
Insertring diameter 110:96 mm
Insertring diameter 110:98 mm
Insertring diameter 110:90 mm
Insertring diameter 110:105 mm
Insertring diameter 110:95 mm to use with only 1 filterholder up to focal length 4.5mm
Insertring diameter 110:87mm - e. g. for Cooke Panchro lenses
Insertring diameter 110:104mm Cine Xenare Mrk III
Insertring diameter 110:80 mm
Adapter ring diameter 104:M 77mm (screw-in size for DV/HDV)
Intermediate Ring diameter 104:105mm (for Century Tele converter)
Adapterring diameter 104:M 82mm (screw-in size for DV/HDV)
Adapter Ring diameter 104:M 72 mm (screw-in DV/HDV Canon + Panasonic)
Adapter Ring diameter 104:M 72 mm - version e. g. for Sony S270 and SD411 / SD440
Separate Flat plate for F55 shoulder base plate
Separate Flat base plate Short for F55 shoulder base plate
Separate Dovetail plate for F55 shoulder base plate
Carbon fibre filter holder 4x4
105mm to M77 step-down adapter ring, for inside M77 threaded lens fronts. Suitable for Clip-on Wide Angle Mattebox 0200-0250 to Sony PMW-EX1.
The Wooden Camera Zip Box holds one 4 x 4" filter and is useful for handheld, stabilized, and drone filming where a small profile and low weight is desirable.
Délai habituel entre 8 et 12 semaines
1pc. Carbon 15mm Bar, Length: 8500
1pc. Carbon 19mm Bar, Length: 300mm
Combine multiple 95mm circular filters to achieve a unique aesthetic with the 95mm Tilta Dual Circular Filter Tray for Mirage Matte Box. It slides into the slot behind the matte box hood and in front of the lens mount. It replaces the standard circular filter tray, adding the ability to combine two filters, combining their effects.
Délai de livraison de 4 à 6 semaines
Add protection for your 95mm filter and VND module on the Mirage matte box with this Glass Filter Protector from Tilta. The protector is made from clear glass that doesn't affect the image or block any light. It mounts onto the front of the matte box to protect the inside filters from dust or damage.
Délai de livraison de 4 à 6 semaines
Combine multiple 4 x 5.65" filters to achieve a unique aesthetic with the Tilta 4 x 5.65" Stackable Filter Tray Holder, meant to connect your Mirage Matte Box to Stackable Filter Trays (available separately). Together, this setup enables you to always have the option of adding one more filter tray to the front of your stack.
Délai de livraison de 4 à 6 semaines
Combine multiple 4 x 5.65" filters to achieve a unique aesthetic with a set of the Tilta 4 x 5.65" Stackable Filter Tray, meant to attach to your Mirage Matte Box via the Stackable Filter Tray Holder (available separately). Each tray has space for one filter and a rack for an additional filter tray, so you'll always have the option of adding one more...
Délai de livraison de 4 à 6 semaines
Zip Box Flag Set (Top and Sides)
Délai habituel entre 8 et 12 semaines
Rubber Donut Backing for MB-T04 and MB-T06
Délai de livraison de 4 à 6 semaines
1pc. Carbon 15mm Bar, Length: 350mm
Screw-In Reduction Ring 100mm-80mm
Carbon Fiber Top Flag for Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
Replace the original aluminum hood on your Mirage matte box with the Rubber Hood from Tilta. The rubber hood snaps onto your matte box clamp to replace the original hood when shooting close-up or action shots. It can accept a single 4 x 5.65" filter and can also be used with the VND system.
Délai de livraison de 4 à 6 semaines
Mask for MatteBox 450 - spare part
Quick-release mask for CWAH-1FH + SD 411
Insertring diameter 100:95 mm to use with only 1 filterholder up to focal length 4.5mm
Insertring diameter 100:86mm
Insertring diameter 100:62 mm
Insertring diameter 100:70 mm
Insertring diameter 100:92 mm
Insertring diameter 100:65 mm
Insertring diameter 100:75 mm
Insertring diameter 100:94 mm
Insertring diameter 100:98 mm
Insertring diameter 100:85 mm
Insertring diameter 100:90 mm
Insertring diameter 100:80 mm for Video
Insertring diameter 100:80 mm for cine lenses
Insertring diameter 100:83 mm
Insertring diameter 100:87 mm
Insertring diameter 95mm for Retaining Ring (spare)
Insertring diameter 100:95 mm
Insertring diameter 100 mm for Retaining Ring (spare)
Insertring diameter 110 mm for Retaining Ring (spare)
Viewfinder Adapter MMB-2 - with 1/4 and 3/8 threads
MMB-2 Flexible Light Protection
15 mm Rubber chest brace
1pc. Carbon 19mm Bar, Length: 200mm
SmallRig Adapter Rings Kit 3383 is an optional accessory that works with Mini Matte Box 3196.
Délai habituel entre 4 et 5 semaines
French flag. Top flag for MB-450. Item #0430-0001.
Keep scratches and dust off your polarizer or variable ND with the 95mm Filter Protection Cover for Mirage Matte Box from Tilta. Save time when switching locations by attaching the cover instead of breaking down your rig for safe storage.
Délai de livraison de 4 à 6 semaines
Shooters who wish to secure filters to the front of their lens without the use of a matte box can do so with the Lightweight Filter Clamp-On Adapter from Tilta. It is compatible with the Tilta Variable ND, enabling camera operators to keep their apertures wide, even in bright sunlight, as well as the polarizing filter, creating a sharp contrast between...
Délai de livraison de 4 à 6 semaines
The Nucleus Nano Motor Adapter for Tilta Mirage enables you to access motorized control for a 95mm Variable ND Module. Slide the mechanical adapter onto a separately available 15mm rod, then engage its gear with your Nucleus Nano Hand Wheel or Wireless Controller for Tilta Mirage. This aluminum and steel adapter is also compatible with other similarly...
Délai de livraison de 4 à 6 semaines
15mm Rod Support Kit for Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
Top Flag Part Only for MB-T03 and MB-T05
Délai de livraison de 4 à 6 semaines
15mm Bar, 1 pc. Length 250mm
Top flag wide (42cm wide) for MB-3xx
Vocas Top flag (compact) for MB-430 / 450 Matte Box. 38cm wide.
Top flag MB-4XX medium
Donut Ring Part Only for replacement on MB-T03 and MB-T05 Matte Boxes
Délai de livraison de 4 à 6 semaines
Clamp On Matte Box Flexible Adapter Ring 124-95mm
Clamp On Matte Box Flexible Adapter Ring 124-104mm
Clamp On Matte Box Flexible Adapter Ring 124-114mm
Clamp On Matte Box Flexible Adapter Ring 124-100mm
Make fine adjustments to your variable ND and circular polarizer filters with the Tilta Advanced Control Knob for Mirage Matte Box. The control knob mounts directly onto compatible 95mm rotating filters and filter trays for the Tilta Mirage matte box. The knob is also compatible with Tilta's lightweight clamp-on adapter to control Tilta rotating filters...
Délai de livraison de 4 à 6 semaines
This matte black accessory rod uses built-in locating pins for secure mounting and enables you to attach lens motors, handgrips, and other rod-mounted accessories.
Délai habituel entre 8 et 12 semaines
Top flag standard (31cm wide). MKII
Spare Mask for the MB4XX, 16:9.
15mm Bar set lenngth 500mm.
Aluminum Rod (60cm).
Filmmakers can use the 80mm Tilta Cinema Adapter Ring to secure a lens with an 80mm outer diameter to the Tilta Mirage matte box. The 95mm outer diameter of the adapter ring fits snugly and securely into the Mirage matte box.
Délai de livraison de 4 à 6 semaines
Pre-Marked Focus Ring - 2m minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 10' minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 6' minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Iris Ring - 1-32
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 3m minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 0.5m minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 1m minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 0.25m minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 36" minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 20 minimum focus
Délai habituel entre 2 et 6 semaines
Pre-Marked Focus Ring - 10 minimum focus
Délai habituel entre 2 et 6 semaines
1 pc. Length 400mm
1pc. 15mm Bar, Length: 450mm
Separate rubber donut set for flexible donut adapter ring MB 435 / MB-436 & MB-455
Focus scale ring for Aladin / Genio / FOX handwheel
15mm Rod Support Arm for Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
Use the 14500 Power Supply to power a Tilta Mirage Wireless Motor. This lightweight solution uses a single, separately available 14500 battery to power your Mirage lens motor.
Délai de livraison de 4 à 6 semaines
Separate rubber donut set for flexible donut adapter ring 114 mm
15mm Bar, 1 pc. Length 750mm
This Adapter Ring for the Tilta Mirage Matte Box allows you to mount the system directly to a photography lens with a front diameter between 52mm and 85mm. These adapter rings screw into the filter threads on your lens and allow you to clamp the Mirage Matte Box directly onto the adapter.
Délai de livraison de 4 à 6 semaines
4x4 Fabric Donut for MB-T03/MB-T05
Délai de livraison de 4 à 6 semaines
Scale for Aladin Iris control
1 pc. Length 170mm
1 pc. Length 350mm
1 pc. Length 300mm
1 pc. Length 235mm
1 pc. Length 183mm
1 pc. Length 160mm
1 pc. Length 143mm
1 pc. Length 105mm
1 pc. Length 60mm
1 pc. Length 35mm
67mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 85mm Adapter Ring to secure a lens with 85mm filter threading to their Tilta Mirage matte box. The adapter ring also features 85mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
82mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 82mm Adapter Ring to secure a lens with 82mm filter threading to their Tilta Mirage matte box. The adapter ring also features 82mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 77mm Adapter Ring to secure a lens with 77mm filter threading to their Tilta Mirage matte box. The adapter ring also features 77mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
72mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 72mm Adapter Ring to secure a lens with 72mm filter threading to their Tilta Mirage matte box. The adapter ring also features 72mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
77mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 67mm Adapter Ring to secure a lens with 67mm filter threading to their Tilta Mirage matte box. The adapter ring also features 67mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 62mm Adapter Ring to secure a lens with 62mm filter threading to their Tilta Mirage matte box. The adapter ring also features 62mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
58mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 58mm Adapter Ring to secure a lens with 58mm filter threading to their Tilta Mirage matte box. The adapter ring also features 58mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
55mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 55mm Adapter Ring to secure a lens with 55mm filter threading to their Tilta Mirage matte box. The adapter ring also features 55mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
Filmmakers can use the Tilta 52mm Adapter Ring to secure a lens with 52mm filter threading to their Tilta Mirage matte box. The adapter ring also features 52mm female threading on its front, allowing the attachment of a screw-on filter to the lens.
Délai de livraison de 4 à 6 semaines
62mm Adapter Ring for Tilta Mirage V2
Délai de livraison de 4 à 6 semaines
SmallRig 95-114mm Threaded Adapter Ring for Matte Box 2661 is designed to adapt your lenses with a filter thread of 95mm to 114mm in diameter that allows you to mount the Matte Box 2660.The ring screws onto the front of the lens firmly via the thread with a low probability of looseness. The surface of the adapter ring is matte finish to reduce reflections.
Délai habituel entre 4 et 5 semaines
UMB-1 Flag Rod M4 Tiny Thumbscrew
Délai habituel entre 8 et 12 semaines
95 mm Adapter Ring for Tilta Mirage
Délai de livraison de 4 à 6 semaines
85mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
82 mm Lens Attachments for MB-T15 Mini Clamp-on Matte Box V2
Délai de livraison de 4 à 6 semaines
85mm Cinema Adapter Ring for Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
80mm Cinema Adapter Ring for Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
86mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
67mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
77mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
72mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
62mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
58mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
55mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
52mm Lens Attachements for MB-T15 Mini Clamp-on Matte Box
Délai de livraison de 4 à 6 semaines
Rubber donut set for flexible adapter ring MB-4XX consisting of 5 different rings hole diameters are: 80mm 90mm 100mm 110mm 120mm
SmallRig Filter Tray (4 x 4) 3320 forms part of Mini Matte Box 3196 and allows for quick installation of 4 x 4" plug-in filters of 4mm in thickness.
Délai habituel entre 4 et 5 semaines
Spare set of screws (incl. spring washers) for one pivot mechanism for side wings
UMB-1 Flag Rod Captured M4 Knob
Délai habituel entre 8 et 12 semaines
UMB-1 Side Flag Adjustment M4 Knob
Délai habituel entre 8 et 12 semaines
UMB-1 Wooden Logo Badge
Délai habituel entre 8 et 12 semaines
UMB-1 Knob Silver (Rotation Lock)
Délai habituel entre 8 et 12 semaines
UMB-1 Knob Red (Filter Lock)
Délai habituel entre 8 et 12 semaines