Au service des professionnels et passionnés
- Microphone filaire
- Microphone sans fil
- Préampli micro
- Softie micro
- Perche
- Suspension micro
- Pied de micro
- Support fixation
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Support fixation
Support fixation sur Visuals, le spécialiste du matériel audio en Suisse
-
Neumann LH 32 - Wall Bracket
Neumann LH 32 Wall Bracket for KH 120 Monitor allows you to mount your KH 120 monitor to a wall. It allows it to be tilted horizontally and vertically. Mounting hardware is included
84,37 CHF HT
91,20 CHF TTC en stock2 pièce (s) en stock
-
König & Meyer 26736.000.55 - Distance rod - black
Steel tube combination to connect satellite systems. With bottom M20 thread to attach connector plate 24116. Zero backlash and absolute vertical position. Height adjustment with spring-loaded locking screw and safety bolt
77,00 CHF HT
83,24 CHF TTC en stock1 pièce (s) en stock
-
Sennheiser MZH-440 - Fur Windshield for MKE 440
Fur Windshield for MKE 440 Stereo Shotgun Microphone
39,71 CHF HT
42,93 CHF TTC en stock1 pièce (s) en stock
-
Fohhn WAL-03 - Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, white
Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, white
-
-
-
Fohhn FF-FV-100/200 - Flying Cradle for Focus Venue
Flying frame for FV-100 and FV-200, load capacity up to 1.300kg
-
-
-
-
Fohhn ILS-PS-800 - Flight rail adapter kit for PS-800 (2 pieces)
Flight rail adapter kit for PS-800 (2 pieces)
-
Mackie FB100 - Flyware Kit for DRM12A and DRM18S
The Mackie FB100 Flyware Kit is designed for suspending or ground stacking up to four DRM12A active or passive loudspeakers and two DRM18S active or passive subwoofers. The kit includes the flybar, ground stack foot bracket, mounting screws, and locking washers.
1 336,00 CHF HT
1 444,22 CHF TTC en stockDélai habituel entre 2 et 3 semaines
-
-
-
-
-
Fohhn 8207-B0000 - FreeStand III, black
The new Fohhn® Free Stand designer stands have been developed specially for the design speakers and allow the user to arrange different Linea and Arc speaker systems perfectly around the room.
-
Fohhn 8207-W0000 - FreeStand III, white
The new Fohhn® Free Stand designer stands have been developed specially for the design speakers and allow the user to arrange different Linea and Arc speaker systems perfectly around the room.
-
Fohhn VESA XL - Vesa holder for Scale-1/2, black
Vesa holder for Scale-1/2, 75 "- 100", 600x400 to 1000x600, black
-
Fohhn 8206-W0000 - Free Stand II, white
The new Fohhn® Free Stand designer stands have been developed specially for the design speakers and allow the user to arrange different Linea and Arc speaker systems perfectly around the room.
-
Fohhn 8206-B0000 - Free Stand II, black
The new Fohhn® Free Stand designer stands have been developed specially for the design speakers and allow the user to arrange different Linea and Arc speaker systems perfectly around the room.
-
-
DPA Microphones UA0836 - Stereo Boom with Holders UA0836
The DPA Microphones Stereo Boom with Holders UA0836 is a precision-crafted microphone boom, perfect for secure mounting of microphone pairs for A-B stereo recordings. It can be adjusted for both microphone spacing and microphone angle.
Délai habituel entre 2 et 4 semaines
639,74 CHF HT
691,56 CHF TTC en stock -
-
Fohhn Free Stand 180 - Designer stand
Freestanding design stand, cable routing in the profile tube, tube length 1800mm, continuous T-slot, steel base plate (WxDxH) 772 x 578 x 13mm, incl. 4 slot nuts M5, tube natural aluminum, base plate white aluminum (RAL9006)
-
Fohhn Free Stand 180 Black - Designer stand
Freestanding design stand, cable routing in the profile tube, tube length 1800mm, continuous T-slot, steel base plate (WxDxH) 772 x 578 x 13mm, incl. 4 slot nuts M5, black
-
Neumann LH 42 - Ceiling Mount System
The Neumann LH 42 Ceiling Mount System is the ceiling mount and all associated hardware needed to suspend the Neumann 0 410 Active Studio Monitor from a ceiling
Délai habituel entre 2 et 4 semaines
587,93 CHF HT
635,55 CHF TTC en stock -
-
-
Fohhn WLX-600 - Wall bracket for LX-500/501/600/601 et AT-35/40/50, black
Wall bracket for LX-500/501/600/601 et AT-35/40/50, black
-
Fohhn WLX-600 - Wall bracket for LX-500/501/600/601 et AT-35/40/50, white
Wall bracket for LX-500/501/600/601 et AT-35/40/50, white
-
Fohhn SA-8 - Pivot reducing flange, black
Pivot reducing flange, 36mm dia for Linea LX-500/501/600/601, tilting angle continously adjustable of +3°/-10°, black, quickmount system with quick release pin
-
Fohhn SA-8 - Pivot reducing flange, white
Pivot reducing flange, 36mm dia for Linea LX-500/501/600/601, tilting angle continously adjustable of +3°/-10°, white, quickmount system with quick release pin
-
Fohhn VPT-70 - Universal support PT-70 with black spigot TV
Universal support PT-70 with black spigot TV
-
-
-
Fohhn VPT-70-SA-3 Black - Universal Bracket for PT-70, Black
Universal bracket for PT-70, with foot adapter, black
-
DPA Microphones UA0837 - Stereo Boom Excluding Holders
The DPA Microphones Stereo Boom Excluding Holders UA0837 is a precision-crafted microphone boom, perfect for secure mounting of microphone pairs for A-B stereo recordings.
Délai habituel entre 2 et 4 semaines
519,03 CHF HT
561,07 CHF TTC en stock -
Yellowtec YT3822 - EasyLift Monitor Arm L
EasyLift Monitor Arm L - 7-15kg
Délai habituel entre 2 et 4 semaines
464,25 CHF HT
501,85 CHF TTC en stock -
Yellowtec YT3821 - EasyLift Monitor Arm L
EasyLift Monitor Arm L - 3-8kg
Délai habituel entre 2 et 4 semaines
464,25 CHF HT
501,85 CHF TTC en stock -
Yellowtec YT3812 - EasyLift Monitor Arm M
EasyLift Monitor Arm M - 7-15kg
Délai habituel entre 2 et 4 semaines
436,40 CHF HT
471,75 CHF TTC en stock -
Yellowtec YT3811 - EasyLift Monitor Arm M
EasyLift Monitor Arm M - 3-8kg
Délai habituel entre 2 et 4 semaines
436,40 CHF HT
471,75 CHF TTC en stock -
DPA Microphones SBS0400 - Stereo Boom with Shock Mounted Microphone
The lightweight SBS0400 Stereo Boom with Shock Mounted Microphone Holders from DPA Microphones addresses the need for quick, precise, and repeatable ways to switch between AB, XY, ORTF, and DIN stereo principles.
Délai habituel entre 2 et 4 semaines
426,18 CHF HT
460,70 CHF TTC en stock -
Fohhn VLX-600 - Flying adapter for LX-600/601
Flying adapter for LX-600/601 incl. TV spigot (without clamp!), tilting angle adjustable of +3°/-10°, black, quickmount system with quick release pin
-
Yellowtec YT3801 - EasyLift Monitor Arm S
EasyLift Monitor Arm S - 3-8kg
Délai habituel entre 2 et 4 semaines
408,54 CHF HT
441,63 CHF TTC en stock -
Yellowtec YT3802 - EasyLift Monitor Arm S
EasyLift Monitor Arm S - 7-15kg
Délai habituel entre 2 et 4 semaines
408,54 CHF HT
441,63 CHF TTC en stock -
Fohhn VL-1 - Flight adapter for DLI with tilt function, black
Flight adapter for DLI with tilt function, black
-
Neumann LH 46 - Adjustable Ceiling Drop Adapter
The Neumann LH 46 Adjustable Ceiling Drop Adapter is used to vertically suspend a single Neumann monitor off of a ceiling
Délai habituel entre 2 et 4 semaines
394,59 CHF HT
426,55 CHF TTC en stock -
-
-
Yellowtec YT3229 - Monitor Arm XL
700 mm radius, Max 10kg support, Attach to MMS pole, Swivel head with 105° horizontal range, Includes QuickFix for VESA75/100, Adjustable friction for swivel head
Délai habituel entre 2 et 4 semaines
315,69 CHF HT
341,26 CHF TTC en stock -
Yellowtec YT3629 - Folding Monitor Arm XL
Folding Monitor Arm XL 70cm with VESA standard attachment 75/100 and quick release catch black. Supports loads up to 10kg
Délai habituel entre 2 et 4 semaines
315,69 CHF HT
341,26 CHF TTC en stock -
-
Contrik RDL-STR-19B - Stick-On Series Racking System (10 Modules)
The STR-19B Stick-On Series Racking System (10 Modules) is a mounting kit designed to accommodate (10) RDL Stick-On modules. It can be mounted in a rack or secured to almost any flat surface. The unit features a series of angled slots that accept Stick-On modules and provide easy access for configuration and changes.
Délai habituel entre 2 et 4 semaines
308,76 CHF HT
333,77 CHF TTC en stock -
DPA Microphones UA0897 - Shock Mount
The UA0897 Shock Mount is designed for use in environments where vibration levels are unusually high. Its ultra-compact, robust design significantly reduces the amount of vibration that reaches the mic.
Délai habituel entre 2 et 4 semaines
296,19 CHF HT
320,18 CHF TTC en stock -
-
-
Fohhn VXT-10 - Stand bracket and flying applications for XT-10
Stand bracket and flying applications for XT-10, speaker rotates and tilts (without stand adapter)
-
Fohhn VXT-1 - Stand bracket and flying applications for XT-1
Stand bracket and flying applications for XT-1, speaker rotates and tilts (without stand adapter)
-
Yellowtec YT3630 - Folding Monitor Arm
Folding Monitor Arm 50cm with VESA standard attachment 75/100 and quick release catch black. Supports loads up to 15kg
Délai habituel entre 2 et 4 semaines
269,27 CHF HT
291,08 CHF TTC en stock -
Yellowtec YT3230 - Monitor Arm M
505 mm radius, Max 15kg support, Attach to MMS pole, Swivel head with 105° horizontal range, Includes QuickFix for VESA75/100, Adjustable friction for swivel head
Délai habituel entre 2 et 4 semaines
269,27 CHF HT
291,08 CHF TTC en stock -
Contrik RDL-RC-1UR - 19" Universal Rack Chassis
The RC-1UR is a 1RU utility chassis for mounting RDL modules and accessories. The front and rear each feature three RACK-UP mounting bays. The mounting bays fit RACK-UP series products and AMS accessories (using AMS-HR4 adapters, available separately). The interior provides space to mount various STICK-ON and TX series modules.
Délai habituel entre 2 et 4 semaines
263,76 CHF HT
285,12 CHF TTC en stock -
-
-
Contrik RDL-STR-19A - Stick-On Series Racking System (12 Modules)
The STR-19A Stick-On Series Racking System (12 Modules) is a mounting kit designed to accommodate (12) RDL Stick-On modules. It can be mounted in a rack or secured to almost any flat surface. The unit features a series of specially designed slots that accept Stick-On modules.
Délai habituel entre 2 et 4 semaines
259,70 CHF HT
280,74 CHF TTC en stock -
Contrik CR-A2-1HE-ST-SW - Black 19 inch desk drawer or tray (mounted upside down)
Black 19 inch desk drawer or tray (mounted upside down) made of steel, 1 RU, with lateral handles, without full pull-out.
Délai habituel entre 2 et 4 semaines
259,23 CHF HT
280,23 CHF TTC en stock -
Fohhn Vesa-Bracket-DXL Black - VESA holder
VESA holder for Scale product in horizontal version, suitable for screen size 55 "- 100", VESA up to 300 × 300 to 1000 × 600, with mounting for DSP amplifier, black
-
Neumann LH 36 - Titling Adapter for Monitor
The LH 36 Titling Adapter for Monitor from Neumann is designed to mount a monitor to a stand or a ceiling, enabling the monitor to tilt forwards or backwards up to 18° (or 13° for the 0 500 C Digital Active Main Monitor)
Délai habituel entre 2 et 4 semaines
253,98 CHF HT
274,55 CHF TTC en stock -
Contrik RDL-STR-H6A - 10.4" Rack Adapter
The STR-H6A 10.4" Rack Adapter allows you to securely rack mount up to 6 STICK-ON modules. This adapter fits 10.4" (26.41 cm) racks.
Délai habituel entre 2 et 4 semaines
242,18 CHF HT
261,80 CHF TTC en stock -
Contrik RDL-RK-2U - 19" 2RU Utility Rack Chassis
The RK-2U 19" 2U Utility Rack Chassis is a portable and versatile equipment rack that can be placed on or mounted to any flat surface. It has a rack height of 2U and accommodates standard 19" equipment. This solution is ideal for RDL modules or any other equipment that requires a flexible lightweight racking solution.
Délai habituel entre 2 et 4 semaines
240,85 CHF HT
260,36 CHF TTC en stock -
Yamaha BWS50-260 - Wall Bracket
Wall Bracket for MSR100, Stagepas300, MSP7 Studio PAIR
Délai habituel entre 2 et 4 semaines
235,84 CHF HT
254,94 CHF TTC en stock -
Yamaha UB-DZR15HW - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR15H is a horizontal U-bracket enabling simple and easy rigging for DZR15, DZR15-D, and CZR15 loudspeakers.
Délai habituel entre 2 et 4 semaines
234,08 CHF HT
253,04 CHF TTC en stock -
Yamaha UB-DZR15VW - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR15V is a vertical U-bracket enabling simple and easy rigging for DZR15, DZR15-D, and CZR15 loudspeakers.
Délai habituel entre 2 et 4 semaines
234,08 CHF HT
253,04 CHF TTC en stock -
Yamaha UB-DZR15H - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR15H is a horizontal U-bracket enabling simple and easy rigging for DZR15, DZR15-D, and CZR15 loudspeakers.
Délai habituel entre 2 et 4 semaines
234,08 CHF HT
253,04 CHF TTC en stock -
Yamaha UB-DZR15V - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR15V is a vertical U-bracket enabling simple and easy rigging for DZR15, DZR15-D, and CZR15 loudspeakers.
Délai habituel entre 2 et 4 semaines
234,08 CHF HT
253,04 CHF TTC en stock -
DPA Microphones SB0400 - Stereo Boom
The lightweight DPA SB0400 Stereo Boom, with or without a shock mounted microphone holder, addresses the need for quick, precise, and repeatable ways to switch between AB, XY, ORTF, and DIN stereo principles.
Délai habituel entre 2 et 4 semaines
231,20 CHF HT
249,93 CHF TTC en stock -
Sonifex SOL-MS53 - S2 Solutions Monitor Speaker Stands
S2 Solutions Monitor Speaker Stands, 53cm High, Black, Pair
Délai habituel entre 2 et 4 semaines
227,63 CHF HT
246,07 CHF TTC en stock -
Neumann LH 45 - Wall Mount L Bracket
The Neumann LH 45 Wall Mount L Bracket is the surface mount and all associated hardware needed to mount Neumann monitors such as the 0 410 Active Studio Monitor
Délai habituel entre 2 et 4 semaines
227,61 CHF HT
246,05 CHF TTC en stock -
Yamaha BBS251 - Baton Bracket
Baton Bracket for MSR400, MSR100, MSP7 Studio (pc)
Délai habituel entre 2 et 4 semaines
227,04 CHF HT
245,43 CHF TTC en stock -
Fohhn WLX-100 - Wall bracket, black
Wall bracket for LX-60/61, LX-60 ASX, LC-60/100/150 and LEN-60/100/150
-
Fohhn WLX-100 - Wall bracket, white
Wall bracket for LX-60/61, LX-60 ASX, LC-60/100/150 and LEN-60/100/150
-
Yellowtec YT3628 - Monitor Arm SL
Monitor Arm SL Single 45cm with VESA standard attachment 75/100 and quick release catch black. Supports loads up to 15kg
Délai habituel entre 2 et 4 semaines
222,84 CHF HT
240,89 CHF TTC en stock -
Yellowtec YT3228 - Monitor Arm SL
450 mm radius, Ideal for new iPad mount and Copy Stands, Attach to MMS pole, Swivel head with 105° horizontal range, Includes QuickFix for VESA75/100, Adjustable friction for swivel head
Délai habituel entre 2 et 4 semaines
222,84 CHF HT
240,89 CHF TTC en stock -
Contrik RDL-UC-2R - Double Wide RACK-UP Enclosure
The UC-2R is a tabletop utility chassis for mounting RDL modules and accessories. The front and rear each feature two RACK-UP mounting bays. The mounting bays fit RACK-UP series products and AMS accessories (using AMS-HR4 adapters, available separately). The interior provides space to mount various STICK-ON and TX series modules.
Délai habituel entre 2 et 4 semaines
217,64 CHF HT
235,27 CHF TTC en stock -
Contrik CR-A3-1HE-ST-SW - Extendible and lockable 19 inch desk drawer
Extendible and lockable 19 inch desk drawer made of black steel, 1 RU, with full pull-out.
Délai habituel entre 2 et 4 semaines
215,44 CHF HT
232,89 CHF TTC en stock -
Sonifex SOL-MS40 - S2 Solutions Monitor Speaker Stands
S2 Solutions Monitor Speaker Stands, 40cm High, Black, Pair
Délai habituel entre 2 et 4 semaines
213,83 CHF HT
231,15 CHF TTC en stock -
Yamaha UB-DZR12V - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR12V is a vertical U-bracket enabling simple and easy rigging for DZR12, DZR12-D, and CZR12 loudspeakers.
Délai habituel entre 2 et 4 semaines
211,20 CHF HT
228,31 CHF TTC en stock -
Yamaha UB-DZR12VW - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR12V is a vertical U-bracket enabling simple and easy rigging for DZR12, DZR12-D, and CZR12 loudspeakers.
Délai habituel entre 2 et 4 semaines
211,20 CHF HT
228,31 CHF TTC en stock -
Yamaha UB-DZR12HW - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR12H is a horizontal U-bracket enabling simple and easy rigging for DZR12, DZR12-D, and CZR12 loudspeakers.
Délai habituel entre 2 et 4 semaines
211,20 CHF HT
228,31 CHF TTC en stock -
Yamaha UB-DZR12H - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR12H is a horizontal U-bracket enabling simple and easy rigging for DZR12, DZR12-D, and CZR12 loudspeakers.
Délai habituel entre 2 et 4 semaines
211,20 CHF HT
228,31 CHF TTC en stock -
Yamaha BWS251-400 - Wall Bracket
Wall Bracket for MSR400, MSR100, Stagepas300 (pc)
Délai habituel entre 2 et 4 semaines
210,32 CHF HT
227,36 CHF TTC en stock -
Yamaha BWS251-300 - Wall Bracket
Wall Bracket for CBR, DBR, MSR400, MSR100, Stagepas 300 (piece)
Délai habituel entre 2 et 4 semaines
210,32 CHF HT
227,36 CHF TTC en stock -
Yamaha UB2112 - U-Bracket for IF2112/64/95/99/AS, black
U-Bracket for IF2112/64/95/99/AS, black
Délai habituel entre 2 et 4 semaines
204,16 CHF HT
220,70 CHF TTC en stock -
-
Yamaha VUB 2112 - K&M U-Bracket IF2112
K&M U-Bracket IF2112 for portrait mounting with TV-Spigot, swivel / tilt adjustment, inc. TV-spigot
Délai habituel entre 2 et 4 semaines
200,64 CHF HT
216,89 CHF TTC en stock -
Sonifex SOL-MS32 - S2 Solutions Monitor Speaker Stands
S2 Solutions Monitor Speaker Stands, 32cm High, Black, Pair
Délai habituel entre 2 et 4 semaines
200,03 CHF HT
216,23 CHF TTC en stock -
-
-
Yamaha BCS20-150 - Ceiling fixing for small speakers
Ceiling fixing for small speakers: S55, S15, S15W, MSP5 STUDIO, HS5I, MS101III
Délai habituel entre 2 et 4 semaines
196,24 CHF HT
212,14 CHF TTC en stock -
Mackie FKDRM18S - Suspension kit for DRM185
Suspension kit for DRM185S. Requires the FB100
192,00 CHF HT
207,55 CHF TTC en stockDélai habituel entre 2 et 3 semaines
-
Yellowtec YT3292 - MMS Wall 130 cm / 47.3 inch
Horizontal bar to connect two MMS poles for mounting mic arms between poles
Délai habituel entre 2 et 4 semaines
188,49 CHF HT
203,76 CHF TTC en stock -
Yamaha UB-DZR10V - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR10V is a vertical U-bracket enabling simple and easy rigging for DZR10, DZR10-D, and CZR10 loudspeakers.
Délai habituel entre 2 et 4 semaines
187,44 CHF HT
202,62 CHF TTC en stock -
Yamaha UB-DZR10H - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR10H is a horizontal U-bracket enabling simple and easy rigging for DZR10, DZR10-D, and CZR10 loudspeakers.
Délai habituel entre 2 et 4 semaines
187,44 CHF HT
202,62 CHF TTC en stock -
Yamaha UB-DZR10HW - U-Bracket for Rigging (Horizontal)
The Yamaha UB-DZR10H is a horizontal U-bracket enabling simple and easy rigging for DZR10, DZR10-D, and CZR10 loudspeakers.
Délai habituel entre 2 et 4 semaines
187,44 CHF HT
202,62 CHF TTC en stock -
Yamaha UB-DZR10VW - U-Bracket for Rigging (Vertical)
The Yamaha UB-DZR10V is a vertical U-bracket enabling simple and easy rigging for DZR10, DZR10-D, and CZR10 loudspeakers.
Délai habituel entre 2 et 4 semaines
187,44 CHF HT
202,62 CHF TTC en stock -
Yamaha BWS50-190 - Wall Bracket
Wall Bracket for Stagepas300, MSP7 Studio PAIR
Délai habituel entre 2 et 4 semaines
187,44 CHF HT
202,62 CHF TTC en stock -
Sonifex SOL-MS21 - S2 Solutions Monitor Speaker Stands
S2 Solutions Monitor Speaker Stands, 21cm High, Black, Pair
Délai habituel entre 2 et 4 semaines
186,23 CHF HT
201,31 CHF TTC en stock -
Yamaha BCS20-210 - Ceiling fixing for small speakers
Ceiling fixing for small speakers: S55, S15, S15W, MSP5 STUDIO, HS5I, MS101III
Délai habituel entre 2 et 4 semaines
184,80 CHF HT
199,77 CHF TTC en stock -
Sennheiser SL-CM-FB - Ceiling suspension kit
Ceiling suspension kit
Délai habituel entre 2 et 4 semaines
184,36 CHF HT
199,29 CHF TTC en stock -
Symetrix 80-0192-A - T-10 Table Mount
T-10 Table Mount - Table mount for T-10 touchscreen
Délai habituel entre 2 et 4 semaines
181,06 CHF HT
195,73 CHF TTC en stock -
Fohhn VAT-09 - Vertical stand for AT-05/061/07/08/09, black
Vertical stand for AT-05/061/07/08/09, black
-
Fohhn VAT-09 - Vertical stand for AT-05/061/07/08/09, white
Vertical stand for AT-05/061/07/08/09, white
-
-
-
Contrik RDL-SF-RA1 - SysFlex Rack Adapter
The SF-RA1 rack mounts several SysFlex modules in fixed or mobile installations. Modules quickly snap into the SysFlex rack mount and each is firmly secured with a single screw. The racking system segregates network and power wiring from the audio and digital audio connectors.
Délai habituel entre 2 et 4 semaines
177,50 CHF HT
191,88 CHF TTC en stock -
Contrik RDL-DC-4W - Desktop or Wall Mounted Chassis for 4 Decora Units White
The white DC-4W Desktop or Wall Mounted Chassis is designed to hold 1, 2, 3, or 4 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
177,45 CHF HT
191,82 CHF TTC en stock -
Fohhn VAT-20 - Vertical stand for AT-201 and AT-221w, black
Vertical stand for AT-201 and AT-221w, black
-
Fohhn VAT-20 - Vertical stand for AT-201 and AT-221w, white
Vertical stand for AT-201 and AT-221w, white
-
-
-
-
Yamaha UB-DXR15 - U-bracket for DXR15
U-bracket for DXR15
Délai habituel entre 2 et 4 semaines
176,00 CHF HT
190,26 CHF TTC en stock -
Neumann LH 65 - Table Stand
The Neumann LH 65 Table Stand for KH 120 Monitor is height and angle adjustable. Easily mount the Neumann KH 120 A/D active monitor and adjust angle vertically and horizontally
Délai habituel entre 2 et 4 semaines
174,89 CHF HT
189,06 CHF TTC en stock -
Sonifex SOL-MS11 - S2 Solutions Monitor Speaker Stands
S2 Solutions Monitor Speaker Stands, 11cm High, Black, Pair
Délai habituel entre 2 et 4 semaines
172,43 CHF HT
186,40 CHF TTC en stock -
Symetrix 80-0107-A - 1 U Rack Tray
19 inch rack tray for mounting up to two half rack units in a 1 U rack space.
Délai habituel entre 2 et 4 semaines
171,77 CHF HT
185,68 CHF TTC en stock -
Yamaha UB2208 - U-bracket for the IF2208 speaker, Black
U-bracket for the IF2208 speaker, Black
Délai habituel entre 2 et 4 semaines
169,84 CHF HT
183,60 CHF TTC en stock -
Yamaha UB2208W - U-bracket for the IF2208 speaker, White
U-bracket for the IF2208 speaker, White
Délai habituel entre 2 et 4 semaines
169,84 CHF HT
183,60 CHF TTC en stock -
Neumann LH 41 - Loudspeaker Base Plate
The LH 41 Loudspeaker Base Plate for Tripod Stand from Neumann is an adapter to fit a loudspeaker onto a tripod stand
Délai habituel entre 2 et 4 semaines
166,10 CHF HT
179,55 CHF TTC en stock -
Neumann LH 43 - Surface Mount System
The Neumann LH 43 Surface Mount System is the surface mount and all associated hardware needed to mount Neumann monitors such as the 0 410 Active Studio Monitor. The LH 43 may be used with the LH 42 ceiling mount
Délai habituel entre 2 et 4 semaines
166,10 CHF HT
179,55 CHF TTC en stock -
Fohhn SA-6 - Stand adapter, white
Stand adapter for Linea LX-100 and LX-150, removable, for mobile applications
-
Fohhn SA-6 - Stand adapter, black
Stand adapter for Linea LX-100 and LX-150, removable, for mobile applications
-
Yamaha UB-DXR12 - U-bracket for DXR12
U-bracket for DXR12
Délai habituel entre 2 et 4 semaines
164,56 CHF HT
177,89 CHF TTC en stock -
Contrik CR-S2-3HE-ST-SW - Black, lockable 19 inch steel rack drawer, 3RU
Black, lockable 19 inch steel rack drawer with full pull-out and rounded edges and locking. 3 RU, height: 132 mm, 360 mm depth.
Délai habituel entre 2 et 4 semaines
164,44 CHF HT
177,76 CHF TTC en stock -
Yellowtec YT3291 - MMS Wall 100 cm / 39.4 inch
Horizontal bar to connect two MMS poles for mounting mic arms between poles
Délai habituel entre 2 et 4 semaines
163,42 CHF HT
176,66 CHF TTC en stock -
Contrik RDL-UC-1R - RACK-UP Enclosure
The UC-1R is a tabletop utility chassis for mounting RDL modules and accessories. The front and rear each feature one RACK-UP mounting bay. The mounting bays fit RACK-UP series products and AMS accessories (using AMS-HR4 adapters, available separately). The interior provides space to mount various STICK-ON and TX series modules.
Délai habituel entre 2 et 4 semaines
162,78 CHF HT
175,97 CHF TTC en stock -
Contrik RDL-SR-4 - Stick-On Series Mounting Rack
The SR-4 Stick-On Series Mounting Rack is a kit that allows you to mount Stick-On modules to a backboard, wall, or nearly any other flat surface. The unit will accommodate (4) Stick-On power amplifiers or (7) standard Stick-On modules. TX modules may also be used with this unit.
Délai habituel entre 2 et 4 semaines
161,86 CHF HT
174,97 CHF TTC en stock -
Yellowtec YT3231 - Monitor Arm XS
Swivel only, Max 15kg support, Attach to MMS pole, Swivel head with 105° horizontal range, Includes QuickFix for VESA75/100, Adjustable friction for swivel head
Délai habituel entre 2 et 4 semaines
161,56 CHF HT
174,65 CHF TTC en stock -
Yellowtec YT3631 - Monitor Support Carriage
Monitor Support Carriage with VESA standard attachment 75/100 black. Supports loads up to 15kg
Délai habituel entre 2 et 4 semaines
161,56 CHF HT
174,65 CHF TTC en stock -
Fohhn VAT-08 - Vertical stand for AT-05/061/07/08/09, white
Vertical stand for AT-05/061/07/08/09, white
-
-
-
-
-
Fohhn VAT-08 - Vertical stand for AT-05/061/07/08/09, black
Vertical stand for AT-05/061/07/08/09, black
-
Contrik CR-S2-2HE-ST-SW - Black, lockable 19 inch steel rack drawer, 2RU
Black, lockable 19 inch steel rack drawer with full pull-out and rounded edges and locking. 2 RU, height: 88 mm, 360 mm depth.
Délai habituel entre 2 et 4 semaines
157,60 CHF HT
170,37 CHF TTC en stock -
DPA Microphones CSM4000 - Compact Microphone Shock Mount
The DPA Compact Microphone Shock Mount is a shock mount designed for use with compact microphones measured at 19mm in diameter (.75"). The mount features rubber isolation for optimum resistance against noise caused by shock and a threaded fitting that accommodates the most popular international threads.
Délai habituel entre 2 et 4 semaines
156,92 CHF HT
169,63 CHF TTC en stock -
DPA Microphones CXO4000 - Compact XY/ORTF Stereo Holder
Get the sound you want, by having the right microphone mount and the right mics. DPA designs this Compact XY/ORTF Stereo Holder for advanced sound reproduction. It brings boom sound, mono compatibility, and convenient compatibility with windscreens.
Délai habituel entre 2 et 4 semaines
156,92 CHF HT
169,63 CHF TTC en stock -
Contrik RDL-EZ-CC6 - Component Chassis for EZ Series Products
The EZ-CC6 is an enclosure that can hold electronics. It was specifically designed to house RDL's EZ Series of A/V components. It's a great solution for creating a custom installation of EZ modules, especially in situations where you don't need a full-blown 19" rack.
Délai habituel entre 2 et 4 semaines
156,82 CHF HT
169,52 CHF TTC en stock -
Contrik RDL-WDG1R - Table Top Wedge Chassis
The WDG1R is a tabletop enclosure for mounting any RACK-UP module. All steel construction.
Délai habituel entre 2 et 4 semaines
155,29 CHF HT
167,87 CHF TTC en stock -
Fohhn WLF-2 - Wall bracket, black
Wall bracket for Linea Focus DLI-130/230 and LFI-350*/450* and LF-120/220 (*2 pcs necessary)
-
Fohhn WLF-2 - Wall bracket, white
Wall bracket for Linea Focus DLI-130/230 and LFI-350*/450* and LF-120/220 (*2 pcs necessary)
-
Fohhn WLF-1 - Wall bracket, black
Wall bracket for Linea Focus DLI-130/230 and LFI-350*/450* and LF-120/220 (*Note: For secure mounting of LFI-350/450 two pieces of WLF-1 are necessary!)
-
Fohhn WLF-1 - Wall bracket, white
Wall bracket for Linea Focus DLI-130/230 and LFI-350*/450* and LF-120/220 (*Note: For secure mounting of LFI-350/450 two pieces of WLF-1 are necessary!)
-
Contrik CR-S1-3HE-ST-SW - Black 19 inch steel drawer, 3RU
Black 19 inch steel drawer, with full pullout and rounded edges. 3 RU, height: 132 mm, 360 mm depth.
Délai habituel entre 2 et 4 semaines
152,54 CHF HT
164,90 CHF TTC en stock -
Yamaha BAS-10 - Free angle clamp
Free angle clamp for MS101III, MSP3, S15, S55
Délai habituel entre 2 et 4 semaines
152,24 CHF HT
164,57 CHF TTC en stock -
Contrik RDL-DC-3W - Desktop or Wall Mounted Chassis for 3 Decora Units White
The white DC-3W Desktop or Wall Mounted Chassis is designed to hold 1, 2, or 3 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
151,73 CHF HT
164,02 CHF TTC en stock -
Contrik RDL-DC-3G - Desktop or Wall Mounted Chassis for 3 Decora Units Gray
The gray DC-3G Desktop or Wall Mounted Chassis is designed to hold 1, 2, or 3 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
151,73 CHF HT
164,02 CHF TTC en stock -
Yellowtec YT3290 - MMS Wall 80 cm / 31.5 inch
Horizontal bar to connect two MMS poles for mounting mic arms between poles
Délai habituel entre 2 et 4 semaines
149,49 CHF HT
161,60 CHF TTC en stock -
DPA Microphones GM1500 - Gooseneck Mount
Meant to be mounted in a piano frame (or any other magnetic surface), the DPA GM1500 Gooseneck Mount is a combination of magnet mount gooseneck and shock mount.
Délai habituel entre 2 et 4 semaines
147,63 CHF HT
159,59 CHF TTC en stock -
Contrik RDL-DC-4B - Desktop or Wall Mounted Chassis for 4 Decora Units Black
The black DC-4B Desktop or Wall Mounted Chassis is designed to hold 1, 2, 3, or 4 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
147,26 CHF HT
159,19 CHF TTC en stock -
Contrik RDL-DC-4G - Desktop or Wall Mounted Chassis for 4 Decora Units Gray
The gray DC-4G Desktop or Wall Mounted Chassis is designed to hold 1, 2, 3, or 4 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
147,26 CHF HT
159,19 CHF TTC en stock -
Yamaha UB-DXRDHR10 - U-bracket for DXR 10, DHR10 (piece)
U-bracket for DXR 10, DHR10 (piece)
Délai habituel entre 2 et 4 semaines
146,96 CHF HT
158,86 CHF TTC en stock -
Yamaha UB-DXRDHR12 - U-Bracket for DXR12MKII, DHR12, or CHR12 Speaker
It features two sturdy steel L-brackets that combine into a U-shape and three bags of parts to ensure proper attachment of the U-bracket to your compatible speaker. Additional mounting methods are possible using optional baton, wall, and ceiling brackets.
Délai habituel entre 2 et 4 semaines
146,96 CHF HT
158,86 CHF TTC en stock -
Contrik CR-A1-1HE-ST-SW - Extendible 19 inch desk drawer
Extendible 19 inch desk drawer made of black steel, with 1 RU.
Délai habituel entre 2 et 4 semaines
145,19 CHF HT
156,95 CHF TTC en stock -
Contrik RDL-FP-RRAH - Hinged Rack Adapter for Flat-Pak Modules
The FP-RRAH is a hinged 19 inch rack adapter for Flat-Pak modules. When the module is attached and the FP-RRAH is mounted to a standard audio rack the hinge allows easy access to the module if needed.
Délai habituel entre 2 et 4 semaines
144,85 CHF HT
156,58 CHF TTC en stock -
Contrik CR-S1-2HE-ST-SW - Black 19 inch steel drawer, 2RU
Black 19 inch steel drawer, with full pullout and rounded edges. 2 RU, height: 88 mm, 360 mm depth.
Délai habituel entre 2 et 4 semaines
144,80 CHF HT
156,53 CHF TTC en stock -
-
-
Yamaha VUB 2108 - K&M U-Bracket IF2108
K&M U-Bracket IF2108 for portrait mounting with TV-Spigot, swivel / tilt adjustment, incl. TV-spigot
Délai habituel entre 2 et 4 semaines
139,92 CHF HT
151,25 CHF TTC en stock -
Neumann LH 61 - Adjustable L-Bracket
The Neumann LH 61 Adjustable L-Bracket is used to mount the Neumann KH 120 D / KH 120 A Active Monitors and allow for angle adjustable positioning of ±20°
Délai habituel entre 2 et 4 semaines
139,74 CHF HT
151,06 CHF TTC en stock -
Fohhn SA-5 - Pivot reducing flange
Pivot reducing flange, 36mm dia. with 2x M6 screw for Linea AL-50/100/150 and AT-05/06/07/08/09
-
Yamaha UB2108W - U-Bracket For IF2108 Speaker, White
U-Bracket For IF2108 Speaker, White
Délai habituel entre 2 et 4 semaines
133,76 CHF HT
144,59 CHF TTC en stock -
Yamaha UB2108 - U-Bracket For IF2108 Speaker, Black
U-Bracket For IF2108 Speaker, Black
Délai habituel entre 2 et 4 semaines
133,76 CHF HT
144,59 CHF TTC en stock -
Contrik CR-A4-3HE-ST-SW - Extendible 19 inch desk drawer
Extendible 19 inch desk drawer made of black steel, 3 RU, with full pull-out.
Délai habituel entre 2 et 4 semaines
133,16 CHF HT
143,95 CHF TTC en stock -
-
-
Fohhn WAT-12 - Wall bracket, white
Wall bracket, universal adjustment 360° for AT-30/35/40/50 and heavy duty also for AT-08/09/10/201, adapter plate 90°-rotatable
-
Fohhn WAT-12 - Wall bracket, black
Wall bracket, universal adjustment 360° for AT-30/35/40/50 and heavy duty also for AT-08/09/10/201, adapter plate 90°-rotatable
-
-
Contrik RDL-RM-D9 - 19" Rack Mount for 9 Decora Modules
The RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.
Délai habituel entre 2 et 4 semaines
129,15 CHF HT
139,61 CHF TTC en stock -
DPA Microphones SM1500 - Shock Mount
The DPA Microphones SM1500 Shock Mount features a double pole construction on an adjustable microphone stand base.
Délai habituel entre 2 et 4 semaines
129,06 CHF HT
139,51 CHF TTC en stock -
Yamaha UB-DXR8 - U-bracket for DXR8
U-bracket for DXR8
Délai habituel entre 2 et 4 semaines
128,48 CHF HT
138,89 CHF TTC en stock -
Contrik RDL-DC-2W - Desktop or Wall Mounted Chassis for 2 Decora Unit White
The white DC-2W Desktop or Wall Mounted Chassis is designed to hold 1 or 2 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
126,47 CHF HT
136,71 CHF TTC en stock -
Contrik RDL-DC-2B - Desktop or Wall Mounted Chassis for 2 Decora Units Black
The black DC-2B Desktop or Wall Mounted Chassis is designed to hold 1 or 2 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
126,47 CHF HT
136,71 CHF TTC en stock -
Contrik RDL-DC-3B - Desktop or Wall Mounted Chassis for 3 Decora Units Black
The black DC-3B Desktop or Wall Mounted Chassis is designed to hold 1, 2, or 3 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
125,91 CHF HT
136,11 CHF TTC en stock -
Contrik RDL-SR-10 - Stick-On Series Mounting Rack
The SR-10 Stick-On Series Mounting Rack is a kit that allows you to mount Stick-On modules in a rack or to a backboard. It will accommodate up to (10) modules. The modules slide into specially designed slots, making it easy to change the configuration of your setup as needed
Délai habituel entre 2 et 4 semaines
124,69 CHF HT
134,79 CHF TTC en stock -
Contrik RDL-SR-12A - Stick-On Series Mounting Rack
The SR-12A Stick-On Series Mounting Rack is a kit that allows you to mount Stick-On modules in a rack or to a backboard. It will accommodate up to (12) modules. The modules slide into specially designed slots, making it easy to change the configuration of your setup as needed
Délai habituel entre 2 et 4 semaines
124,69 CHF HT
134,79 CHF TTC en stock -
Yamaha HUB2205 - K&M Horizontal U-Bracket for IF2205
K&M Horizontal U-Bracket for IF2205 with TV-Spigot, swivel/tilt adjustment, incl. TV-spigo
Délai habituel entre 2 et 4 semaines
119,68 CHF HT
129,37 CHF TTC en stock -
Yellowtec YT3275 - Pad Dock with QuickFix
Pad Dock with QuickFix: For use with Tablet Computers, Adapts to the size of your Tablet Computer, Extandable brackets, QuickFix for easy installation
Délai habituel entre 2 et 4 semaines
118,85 CHF HT
128,48 CHF TTC en stock -
Contrik RDL-HD-WM1 - Wall Mount Bracket for HD Series Amplifiers
The HD-WM1 mounts a compatible HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation. Special tabs are provided to firmly secure the wiring connected to the HD product.
Délai habituel entre 2 et 4 semaines
114,71 CHF HT
124,00 CHF TTC en stock -
Contrik RDL-FP-RRA - Rack Rail Adapter for Flat-Pak Modules
The FP-RRA is a 19 inch rack rail adapter for RDL Flat-Pak modules. The modules slip onto the FP-RRA, which in turn is mounted to a standard 19 inch audio rack.
Délai habituel entre 2 et 4 semaines
114,03 CHF HT
123,27 CHF TTC en stock -
Fohhn QAT-20 - Horizontal support for AT-201 / 22w, white
Horizontal support for AT-201 / 22w, white
-
Fohhn QAT-20 - Horizontal support for AT-201 / 22w, black
Horizontal support for AT-201 / 22w, black
-
Fohhn SA-7 - Special bracket for traverse mounting, white
Special bracket for traverse mounting e.g. with Clamp LC-50 and TV-spigot with M10 female thread
-
Fohhn SA-7 - Special bracket for traverse mounting, black
Special bracket for traverse mounting e.g. with Clamp LC-50 and TV-spigot with M10 female thread
-
Yamaha BWS20-190 - Wall bracket for MS101III, MSP3, HS5I (pair)
Wall bracket for MS101III, MSP3, HS5I (pair)
Délai habituel entre 2 et 4 semaines
111,76 CHF HT
120,81 CHF TTC en stock -
Contrik RDL-HD-RA2 - Rack Adapter
Mounts 2 HD series products. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel.
Délai habituel entre 2 et 4 semaines
108,62 CHF HT
117,42 CHF TTC en stock -
Contrik RDL-FP-HRA - 10.4" Rack Mount Adapter for FLAT-PAK Series
The FP-HRA 10.4" Rack Mount Adapter for FLAT-PAK Series is a rack mount for the FLAT-PAK modules. This adapter fits 10.4" standard racks. The back of this 3.4" high panel adapter features top and bottom rails to insert RDL modules. The required mounting length for multiple modules is the module length and an additional 0.65" for each power interconnection.
Délai habituel entre 2 et 4 semaines
107,78 CHF HT
116,51 CHF TTC en stock -
Contrik RDL-RU-RA3R - Rack Adapter for Three RACK-UP Series Modules
The RDL RU-RA3R is a rack adapter designed to mount three RACK-UP modules in mobile or fixed installations. RACK-UP series products easily drop into the chassis, slide into position, and are secured by tightening two screws provided with the RACK-UP product or accessory.
Délai habituel entre 2 et 4 semaines
107,26 CHF HT
115,95 CHF TTC en stock -
Yellowtec YT3214 - MMS Wall Bracket
MMS Wall Bracket: For mounting mic arm on a wall
Délai habituel entre 2 et 4 semaines
105,85 CHF HT
114,42 CHF TTC en stock -
Yamaha UB2205 - U-Brackets For IF2105 Speaker, Black
U-Brackets For IF2105 Speaker, Black
Délai habituel entre 2 et 4 semaines
105,60 CHF HT
114,15 CHF TTC en stock -
Yamaha UB2205W - U-Brackets For IF2105 Speaker, White
U-Brackets For IF2105 Speaker, White
Délai habituel entre 2 et 4 semaines
105,60 CHF HT
114,15 CHF TTC en stock -
Contrik RDL-DC-2G - Desktop or Wall Mounted Chassis for 2 Decora Unit Gray
The gray DC-2G Desktop or Wall Mounted Chassis is designed to hold 1 or 2 Decora style units, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
104,97 CHF HT
113,47 CHF TTC en stock -
Symetrix 80-0123-B - 1/2 U Filler Panel
Used with 19 1U Rack Tray to fill an unused 1/2 rack space.
Délai habituel entre 2 et 4 semaines
102,14 CHF HT
110,41 CHF TTC en stock -
Symetrix 80-0108-A - 1/2 U Surface Mount Bracket
Bracket for mounting a single half rack unit under table, onto wall, or onto other flat surfaces. Compatible Products. Prism 0x0, Prism 4x4. xIn 4, xOut 4, xIO 4x4. xControl, ARC-PSe. Compliance: RoHS
Délai habituel entre 2 et 4 semaines
102,14 CHF HT
110,41 CHF TTC en stock -
Fohhn DR-1 - Intermediate tube for satellite speaker, white
Intermediate tube for satellite speaker, white, height: 905 mm - 1.450 mm - end of tube: ? 35 mm, M20 threaded stud
-
Fohhn WS-5 - Wall Bracket, White
Wall bracket, rotating, for speakers with recess, integration into niches, white
-
-
Fohhn WS-2 - Wall bracket for Scale-1/2, rotatable, white
Wall bracket for Scale-1/2, rotatable, white
-
Fohhn WS-5 - Wall Bracket, Black
Wall bracket, rotating, for speakers with recess, integration into niches, balck
-
Fohhn DR-1 - Intermediate tube for satellite speaker, black
Intermediate tube for satellite speaker, black, height: 905 mm - 1.450 mm - end of tube: ? 35 mm, M20 threaded stud
-
Fohhn WS-2 - Wall bracket for Scale-1/2, rotatable, black
Wall bracket for Scale-1/2, rotatable, black
-
-
-
-
Contrik RDL-HD-HRA1 - 10.4" Rack Adapter
The HD-HRA1 10.4" Rack Adapter allows you to securely mount a single HD series product. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel. This adapter fits 10.4" (26.41 cm) racks.
Délai habituel entre 2 et 4 semaines
101,22 CHF HT
109,42 CHF TTC en stock -
Yellowtec YT3295 - MMS Wall Adapter
Horizontal bar to connect two MMS poles for mounting mic arms between poles,To mount mic arm to MMS Wall
Délai habituel entre 2 et 4 semaines
101,21 CHF HT
109,41 CHF TTC en stock -
DPA Microphones UA0961 - Microphone Holder
Mount your microphone with true security; use DPA's Microphone Holder, which fits all DPA's large diaphragm and standard microphones plus other microphones with 19 mm housings. DPA delivers extreme quality; start here.
Délai habituel entre 2 et 4 semaines
101,21 CHF HT
109,41 CHF TTC en stock -
DPA Microphones GSM4000 - Gooseneck Shock Mount for d:dicate
The DPA Microphones Gooseneck Shock Mount for d:dictate can be used to mount a microphone on an instrument. It is a combination of an 4.5" long gooseneck and shock mount. You can use it together with your choice of instrument clip and easily attach the mount to your specific instrument.
Délai habituel entre 2 et 4 semaines
101,21 CHF HT
109,41 CHF TTC en stock -
Ultimate TS-80B - Tripod Load capacity of 150lbs, single, black
Tripod (Black) Load capacity of 150lbs single, Alu, weight 3.3kg, 1118-2007mm, max. 68.2 kg
Délai habituel entre 2 et 4 semaines
101,00 CHF HT
109,18 CHF TTC en stock -
Contrik RDL-DC-1B - Desktop or Wall Mounted Chassis Black
The black DC-1B Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
100,64 CHF HT
108,79 CHF TTC en stock -
Contrik RDL-DC-1G - Desktop or Wall Mounted Chassis Gray
The gray DC-1G Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
100,64 CHF HT
108,79 CHF TTC en stock -
Contrik RDL-DC-1W - Desktop or Wall Mounted Chassis White
The white DC-1W Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Délai habituel entre 2 et 4 semaines
100,64 CHF HT
108,79 CHF TTC en stock -
Contrik RDL-RC-PS5 - 19" Rackmount for 5 Desktop Power Supplies
The RC-PS5 19" Rackmount for 5 Desktop Power Supplies can be used to mount up to 5 RDL desktop power supplies. Wiring can be routed out the sides or rear of the chassis.
Délai habituel entre 2 et 4 semaines
97,63 CHF HT
105,54 CHF TTC en stock -
Contrik RDL-RK-2UX - 19" Utility Rack Chassis, 2 RU extension
The RK-2UX is an extension kit that adds 2RU in height to any RK-2U. Multiple kits may be added to an RK-2U to make it any height.
Délai habituel entre 2 et 4 semaines
97,26 CHF HT
105,14 CHF TTC en stock -
Mackie DB-200 - Premium Desktop Microphone Boom Arm
Keep you microphone ready for action while reducing cable clutter with the Mackie DB-200, a stylish and sturdy premium desktop microphone boom arm that can be articulated to the perfect position.
97,00 CHF HT
104,86 CHF TTC en stockDélai habituel entre 2 et 3 semaines
-
Contrik RDL-HD-WM2 - Wall Mount Bracket for HD Series Amplifiers
The HD-WM2 mounts a compatible HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation. Special tabs are provided to firmly secure the wiring connected to the HD product.
Délai habituel entre 2 et 4 semaines
96,86 CHF HT
104,71 CHF TTC en stock -
Neumann LH 25 - Speaker Mounting Bracket
The LH 25 Speaker Mounting Bracket from Neumann allows you to mount your speaker monitor on a wall or ceiling. The LH 25 can also be fixed onto a loudspeaker stand
Délai habituel entre 2 et 4 semaines
95,79 CHF HT
103,55 CHF TTC en stock -
Neumann LH 29 - TV Spigot
The LH 29 TV-Spigot from Neumann is designed for mounting a monitor onto a lighting stand or G-clamp and truss bar
Délai habituel entre 2 et 4 semaines
95,79 CHF HT
103,55 CHF TTC en stock -
Contrik RDL-WH1 - Power Supply Mounting Adapter Kit
The WH1 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Délai habituel entre 2 et 4 semaines
93,99 CHF HT
101,60 CHF TTC en stock -
Contrik RDL-WH2 - Power Supply Mounting Adapter Kit
The WH2 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Délai habituel entre 2 et 4 semaines
93,99 CHF HT
101,60 CHF TTC en stock -
Contrik RDL-HR-RA2 - Rack Adapter for HALF-RACK Series
The HR-RA2 Rack Adapter is ideal for mounting two HALF-RACK products, plates or accessories side-by-side in one rack space.
Délai habituel entre 2 et 4 semaines
93,92 CHF HT
101,53 CHF TTC en stock -
Contrik RDL-HD-FP2L - Filler Panel with Lens
The HD-FP2L Filler Panel with Lens is designed to mount in front of an HD series product and facilitates complete viewing while preventing user adjustments or tampering with the device. Included lens can be removed during installation.
Délai habituel entre 2 et 4 semaines
92,35 CHF HT
99,83 CHF TTC en stock -
DPA Microphones UA0639 - Microphone Clip
DPA Microphones' UA0639 Microphone Clip is a stand adapter for handheld mics that offers a tight grip while still letting you remove and secure your mic with ease.
Délai habituel entre 2 et 4 semaines
91,92 CHF HT
99,37 CHF TTC en stock -
DPA Microphones TB4000 - Table Base
The DPA TB4000 Microphone Table Base works with most microphone holders with a 3/8-inch thread although its specifically optimized for use with Compact Shock Mount CSM4000. It's black non-reflective surface will match your microphone set up and blend into the background creating a pleasant aesthetic.
Délai habituel entre 2 et 4 semaines
91,92 CHF HT
99,37 CHF TTC en stock -
DPA Microphones MC4001 - Microphone Clip for MMP-E Active Cable
The MC4001 Microphone Clip from DPA fits the recess at the MMP-E active cable preamp. It can be used with hanging mics or low-profile table or instrument mics (sold separately) to attach them to a 3/8" threaded mic stand.
Délai habituel entre 2 et 4 semaines
91,92 CHF HT
99,37 CHF TTC en stock -
Fohhn WAT-08 - Wall bracket, white
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-60/100/150, adapter plate 90°-rotatable
-
-
Fohhn WAT-08k - Wall bracket, white
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-100/150, adapter plate 90°-rotatable
-
Fohhn WAT-08k - Wall bracket, black
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-100/150, adapter plate 90°-rotatable
-
-
Fohhn WAT-08 - Wall bracket, black
Wall bracket, universal adjustment 360° for AT-05, AT-061, AT-07, AT-08, AT-09, AT-10, AT-201, AL-50/100/150, LX-60/100/150, adapter plate 90°-rotatable
-
-
Contrik RDL-RC-HPS3 - 10.4" Rack Adapter
The RC-HPS3 10.4" Rack Adapter mounts up to 3 desktop-style power supplies. Wiring may be routed out the sides and rear of the chassis. It features the Dual-Lok interlocking fastening system to allow you to secure your power supplies. The RC-HPS3 is compatible with all RDL desktop power supplies and with any other desktop power supply having dimensions...
Délai habituel entre 2 et 4 semaines
89,74 CHF HT
97,01 CHF TTC en stock -
Contrik RDL-RM-D3 - 19" Rack Mount for 3 Decora Modules
The RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.
Délai habituel entre 2 et 4 semaines
89,14 CHF HT
96,36 CHF TTC en stock -
Contrik RDL-EZ-RA6 - Rack Adapter for 6 Increments of 1/6 Rack Width
The RDL EZ-RA6 Rack Adapter for 6 Increments of 1/6 Rack Width attaches to only one rack space and slides out for easy product mounting.
Délai habituel entre 2 et 4 semaines
89,09 CHF HT
96,31 CHF TTC en stock -
PreSonus NSB8.8-RACK-KIT - Rackmount Kit for NSB 8.8 AVB Network Stage Box
The PreSonus NSB 8.8 Rackmount Kit allows you to install your NSB 8.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Délai habituel entre 2 et 4 semaines
88,21 CHF HT
95,36 CHF TTC en stock -
PreSonus NSB16.8-RACK-KIT - Rackmount Kit for NSB 16.8 AVB Network Stage Box
The PreSonus NSB 16.8 Rackmount Kit allows you to install your NSB 16.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Délai habituel entre 2 et 4 semaines
88,21 CHF HT
95,36 CHF TTC en stock -
Contrik RDL-HD-BP1 - BACK-PACK Rear Cover
The BACK-PACK Rear Cover is designed to mount onto the HD Series Mixer or Amplifier and prevents users from accessing the rear panel of the device. Accommodating the power supply unit, the Rear Cover offers a fully closed back for the installed amplifier.
Délai habituel entre 2 et 4 semaines
87,05 CHF HT
94,10 CHF TTC en stock -
Contrik RDL-EZ-DC2 - Desktop Chassis for 1/3 Rack Width EZ Series Products
The EZ-DC2 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/3 rack width EZ Series of A/V components. The EZ-DC2 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Délai habituel entre 2 et 4 semaines
86,26 CHF HT
93,25 CHF TTC en stock -
Contrik RDL-HR-HRA1 - 10.4" Rack Adapter
The HR-HRA1 10.4" Rack Adapter is a 1RU rack chassis for mounting one RDL HALF-RACK product, plate, or accessory. HALF-RACK series products drop into the chassis, slide into position, and are secured by tightening 2 or 4 screws provided with the HALF-RACK product or accessory. This adapter fits 10.4" (26.41 cm) racks.
Délai habituel entre 2 et 4 semaines
85,10 CHF HT
91,99 CHF TTC en stock -
Rycote RYC185809 - PCS-Utility Half Coupler Kit Small
PCS-Utility Half Coupler Kit Small
83,16 CHF HT
89,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Rycote RYC185810 - PCS-Utility Half Coupler Kit Large
PCS-Utility Half Coupler Kit Large
83,16 CHF HT
89,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Yamaha STAGEPASSPKSTD - Tripod for Club, BR, MS and MSR Series
Tripod for Club, BR, MS and MSR Series, Stagepas 400/600 (piece)
Délai habituel entre 2 et 4 semaines
82,72 CHF HT
89,42 CHF TTC en stock -
Contrik RDL-EZ-DC1 - Desktop Chassis for 1/6 Rack Width EZ Series Products
The EZ-DC1 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/6 rack width EZ Series of A/V components. The EZ-DC1 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Délai habituel entre 2 et 4 semaines
79,07 CHF HT
85,47 CHF TTC en stock -
Fohhn SA-100 Black - Stand Adapter
SA-100 is particularly suitable for mounting systems with T-slots on a conventional tripod. The adapter head can be tilted and locked.
-
-
-
-
-
Fohhn SA-1 - Reducing flange
Reducing flange, suitable for all speaker stands with 36mm dia., with M6x18mm male thread
-
Fohhn SA-2 - Reducing flange
Reducing flange, 36mm dia. with M8x18mm male thread for AT-10/201/30/35/40/50
-
Yamaha WM2X08 - K&M Wall Mount for IF2108 & IF2208
K&M Wall Mount for IF2108 & IF2208 vertical & horizontal wall mounting
Délai habituel entre 2 et 4 semaines
78,32 CHF HT
84,66 CHF TTC en stock -
Contrik RDL-HR-RU1 - Mounting Adapter Kit
The HR-RU1 is a mounting adapter kit that allows you to mount a RACK-UP module in one side of an HR-RA2 Rack Adapter. The kit consists of 2 mounting brackets and the necessary mounting screws.
Délai habituel entre 2 et 4 semaines
78,23 CHF HT
84,57 CHF TTC en stock -
Neumann LH 28 - Tripod Speaker Stand Adapter
The LH 28 Tripod Speaker Stand Adapter from Neumann is a mounting adaptor for mounting standard tripods with a 35 mm diameter mounting pole. It features a locking screw knob for safety
Délai habituel entre 2 et 4 semaines
75,58 CHF HT
81,70 CHF TTC en stock -
Neumann LH 37 - Mounting Flange Adapter
The LH 37 Mounting Flange Adapter from Neumann is designed for mounting on to a subwoofer with a top panel flange
Délai habituel entre 2 et 4 semaines
75,58 CHF HT
81,70 CHF TTC en stock -
-
-
Contrik RDL-EZ-HRA3 - 10.4" Rack Adapter
The RDL EZ-HRA3 10.4" Rack Adapter when used with the EZ-RA6 Base Plate Assembly (sold separately) allows you to mount any EZ A/V device and occupies 1 RU 10.4" (26.41 cm) space.
Délai habituel entre 2 et 4 semaines
73,97 CHF HT
79,96 CHF TTC en stock -
Yamaha RK-MG12 - Rackmount Kit for MG12 and MG12XU
Rackmount Kit for MG12 and MG12XU
Délai habituel entre 2 et 4 semaines
73,92 CHF HT
79,91 CHF TTC en stock -
Rycote RYC185803 - PCS-Spigot
The PCS-Spigot is the ideal accessory to convert your stands and arms with spigot connections into super reliable, quick release systems and attach any kit with a 3/8" thread.
73,91 CHF HT
79,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Rycote RYC185804 - PCS-Utility
The PCS-Utility is made from robust, high-quality materials whilst being super versatile. With milled anodised aluminium on the exterior for a lightweight but robust body, ensuring durability even in the most challenging conditions
73,91 CHF HT
79,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Cineboutique A-CARDELPLCM - CARDELLINI - Mic Clamp
CARDELLINI - Mic Clamp
Délai habituel entre 2 et 4 semaines
73,13 CHF HT
79,05 CHF TTC en stock -
Yamaha RK-EMX7 - Rackmount Kit for EMX7
Rackmount Kit for EMX7
Délai habituel entre 2 et 4 semaines
73,04 CHF HT
78,96 CHF TTC en stock -
Ultimate TS-70B - Tripod Load capacity of 150lbs, single, black
Tripod (Black) Load capacity of 150lbs single, Alu, weight 2.4kg, 1270-1956mm, max. 68.2 kg
Délai habituel entre 2 et 4 semaines
69,00 CHF HT
74,59 CHF TTC en stock -
Cineboutique A-CARDELPECM - CARDELLINI - Mic Clamp
CARDELLINI - Mini narrow press - Male Congress
Délai habituel entre 2 et 4 semaines
68,25 CHF HT
73,78 CHF TTC en stock -
-
-
Contrik RDL-FP-PSB1A - Desktop Power Supply Mounting Bracket
The RDL FP-PSB1 is a mounting bracket designed for the PS-24U2 power supply. A provision is included for mounting other modules, and any FP-PA20 type audio power amplifier can be mounted directly to the FP-PSB1 as well. The FP-PSB1 can be mounted in an FP-RRA or FP-RRAH Flat-Pak series rack mount panel or to any flat surface.
Délai habituel entre 2 et 4 semaines
67,83 CHF HT
73,32 CHF TTC en stock -
Neumann LH 47 - Mounting Adapter Plate
The Neumann LH 47 Mounting Adapter Plate is used in conjunction with Neumann LH series active monitor mounting accessories
Délai habituel entre 2 et 4 semaines
67,67 CHF HT
73,15 CHF TTC en stock -
Contrik RDL-SF-MSM1 - Microphone Stand Mount for SysFlex Modules
Mounts any SysFlex Module on a Mic Stand (Standard 5/8" 27 TPI). Compatible with All SysFlex Modules. Each SysFlex Module Secured by One Single Screw
Délai habituel entre 2 et 4 semaines
66,47 CHF HT
71,85 CHF TTC en stock -
Contrik RDL-ST-PBR4 - Stick-On Mounting Bracket
The ST-PBR4 Stick-On Mounting Bracket is a mounting frame with slots for four Stick-On modules. It mounts on an FP-PSB1A power supply bracket (available separately) or to any flat surface. The mounting bracket design allows the installer to secure the modules without using any adhesive pads and to slide into a FLAT-PAK rack mount track (available...
Délai habituel entre 2 et 4 semaines
65,70 CHF HT
71,02 CHF TTC en stock -
Fohhn WAL-03 - Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
-
-
-
PreSonus EM-MOUNT - Mounting Kit for PreSonus EarMix 16M
The PreSonus EM-Mount Mounting Kit is designed specifically for the PreSonus EarMix 16M AVB personal monitor mixer and allows for the unit to be mounted to a music stand or microphone stand. The mount can be deployed with two options: it can attach to the standard screw mount at the top of a microphone stand or it can be clamped horizontally to a pole.
Délai habituel entre 2 et 4 semaines
60,35 CHF HT
65,24 CHF TTC en stock -
Contrik RDL-TX-HRA3 - 10.4" Rack Adapter
The TX-HRA3 10.4" Rack Adapter allows you to securely rack mount up to 3 TX modules. This adapter fits 10.4" (26.41 cm) racks.
Délai habituel entre 2 et 4 semaines
59,68 CHF HT
64,51 CHF TTC en stock -
Neumann LH 48 - Tripod Adapter Plate
The black LH 48 Tripod Adapter Plate from Neumann is a 4.5 (115 mm) flange adapter for mounting a monitor or loudspeaker on König & Meyer tripods No. 26790 and No. 26795
Délai habituel entre 2 et 4 semaines
58,88 CHF HT
63,65 CHF TTC en stock -
Neumann LH 64 - Omnimount/VESA Adaptor
An adapter to convert a pair of 70 mm spaced M8 mounting points to the standard Omnimount 75, VESA 75, and VESA 100 mounting points
Délai habituel entre 2 et 4 semaines
58,88 CHF HT
63,65 CHF TTC en stock -
Contrik RDL-RU-BR1 - Mounting Bracket for Rack-Up Module
The RU-BR1 Mounting Bracket for Rack-Up Module is a special mounting bracket designed for use with RDL Rack-Up modules. The bracket allows you to mount (1) module above or below any horizontal surface.
Délai habituel entre 2 et 4 semaines
56,91 CHF HT
61,52 CHF TTC en stock -
Yamaha WM 2205 - K&M Wall Mount for IF2205
K&M Wall Mount for IF2205 vertical & horizontal mounting
Délai habituel entre 2 et 4 semaines
56,32 CHF HT
60,88 CHF TTC en stock -
Yamaha Kit Rack G55/V55 - Rack mounting kit for G55 and XD-V55
Rack mounting kit for G55 and XD-V55
Délai habituel entre 2 et 4 semaines
56,06 CHF HT
60,60 CHF TTC en stock -
Fohhn VAS-12 - Flying- and mounting bracket, black
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
-
Fohhn VAS-12 - Flying- and mounting bracket, white
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
-
-
-
Contrik RDL-RU-HRA1 - 10.4" Rack Adapter
The RU-HRA1 10.4" Rack Adapter mounts 1 RACK-UP module or mounting frame for AMS accessories. This adapter fits 10.4" (26.41 cm) racks.
Délai habituel entre 2 et 4 semaines
55,86 CHF HT
60,38 CHF TTC en stock -
Contrik RDL-HD-FP1 - Filler Panel
The Filler Panel is designed to fill the empty space in the rack adapter or mount in front of an HD series mixer or amplifier, and prevents users from making adjustments or tampering with the device.
Délai habituel entre 2 et 4 semaines
55,07 CHF HT
59,53 CHF TTC en stock -
Fohhn SA-3 - Reducing flange
Reducing flange, 36mm dia. with M10 female thread for vertical brackets VAT-10/20/34/50, VXT-2/3/5, VLX-11, VPT-6 and VPT-70
-
Vocas 0350-1460 - Mic holder 15mm
Mic holder 15mm
Délai habituel entre 2 et 4 semaines
54,37 CHF HT
58,77 CHF TTC en stock -
Contrik RDL-EZ-SD2 - 1/3 Rack Width Storage Drawer
The EZ-SD2 is a slide-out rack drawer that can hold cables, adapters, and more. It was designed to easily mount into the RDL EZ-RA6 rack tray, or the EZ-CC6 component chassis. The EZ-SD2 is a great solution for creating a custom installation of EZ-Series gear in a rack that even has its own storage space.
Délai habituel entre 2 et 4 semaines
54,29 CHF HT
58,69 CHF TTC en stock -
Contrik RDL-SMK-12 - Stick-On Mounting Kit
The SMK-12 Stick-On Mounting Kit is a kit that allows you to mount Stick-On modules to a flat surface. It will accommodate up to (6) modules mounted flat or up to (12) modules mounted on their edge. The modules are fastened to the mounting board using screws.
Délai habituel entre 2 et 4 semaines
53,39 CHF HT
57,71 CHF TTC en stock -
Contrik RDL-EZ-SD1 - 1/6 Rack Width Storage Drawer
The EZ-SD1 is a slide-out rack drawer that can hold cables, adapters, and more. It was designed to easily mount into the RDL EZ-RA6 rack tray, or the EZ-CC6 component chassis. The EZ-SD1 is a great solution for creating a custom installation of EZ-Series gear in a rack that even has its own storage space.
Délai habituel entre 2 et 4 semaines
52,08 CHF HT
56,30 CHF TTC en stock -
-
-
Yamaha BMS10A - Mic Stand adapter
Mic Stand adapter for AG03/06, MG06/10, MS101II, MSP3, STAGEPAS 400i/600i, EMX2
Délai habituel entre 2 et 4 semaines
51,92 CHF HT
56,13 CHF TTC en stock -
PreSonus SLMAD-RACK - StudioLive Series III Console Rackmount Kit
The PreSonus Series III Rackmount Kit allows you to rackmount any StudioLive Series III console, including the 16, 24, and 32 channel versions. The 6-RU rack ears attach to the side of the console with the included mounting screws. A minimum depth of 23" (14 RU) should be allowed for installation.
Délai habituel entre 2 et 4 semaines
51,07 CHF HT
55,21 CHF TTC en stock -
Contrik RDL-HR-FP1 - Half Rack Filler Panel
The HR-FP1 is a filler panel that occupies half of a rack space, or one product space in RDL half rack mounting chassis, like the HR-RA2. It's designed to blend in seamlessly with other half rack products.
Délai habituel entre 2 et 4 semaines
50,56 CHF HT
54,66 CHF TTC en stock -
Yamaha RK1 - Rackmount Kit for QL1
Rackmount Kit for QL1
Délai habituel entre 2 et 4 semaines
49,28 CHF HT
53,27 CHF TTC en stock -
Contrik RDL-HD-ASC1 - Amplifier Security Cover
The Amplifier Security Cover is designed to mount onto the HD Series Mixer or Amplifier and prevents users from making adjustments or tampering with the device. You can access the power buttons and indicators even after mounting the cover on the amplifier/mixer.
Délai habituel entre 2 et 4 semaines
48,88 CHF HT
52,84 CHF TTC en stock -
Contrik RDL-EZ-SMB2 - Surface Mounting Bezel for 1/3 Rack Width Modules
The EZ-SMB2 is a simple wall-mounting bezel that can hold electronics. It was specifically designed for mounting RDL's 1/3 rack width EZ Series of A/V components. The EZ-SMB2 is a great solution for creating a custom installation, especially in situations where you need a seamless mount on a flat surface.
Délai habituel entre 2 et 4 semaines
48,72 CHF HT
52,67 CHF TTC en stock -
Fostex EB-6301 - Mounting bracket for 6301N/6301B series
Mounting bracket for 6301N/6301B series
48,21 CHF HT
52,12 CHF TTC en stockDélai de livraison habituel 4 semaines
-
Mackie Bracket SRM350/C200 - Mounting - Flight Bracket to SRM 350 / C 200
Mounting - Flight bracket to SRM 350 / C 200
48,00 CHF HT
51,89 CHF TTC en stockDélai habituel entre 2 et 3 semaines
-
Blueshape MMIC-S - Wireless stand adaptor
Wireless microphone receiver stand. Fits directly on top of the battery without additional screws. Provided with spare fasteners.
Délai habituel entre 2 et 4 semaines
47,78 CHF HT
51,65 CHF TTC en stock -
Contrik RDL-RC-HPS1 - 10.4" Rack Mount for Desktop Power Supply and TX Module
The RC-HPS1 10.4" Rack Mount for Desktop Power Supply and TX Module mounts one desktop style power supply and one RDL TX module. The RC-HPS1 is compatible with all RDL desktop power supplies and with any desktop power supply with maximum dimensions of 5.8 x 3.0 x 1.7". This adapter fits standard 10.4" racks.
Délai habituel entre 2 et 4 semaines
46,29 CHF HT
50,04 CHF TTC en stock -
Contrik RDL-EZ-SMB1 - Surface Mounting Bezel for 1/6 Rack Width Modules
The EZ-SMB1 is a simple wall-mounting bezel that can hold electronics. It was specifically designed for mounting RDL's 1/6 rack width EZ Series of A/V components. The EZ-SMB1 is a great solution for creating a custom installation, especially in situations where you need a seamless mount on a flat surface.
Délai habituel entre 2 et 4 semaines
45,31 CHF HT
48,98 CHF TTC en stock -
-
-
Fohhn VL-89 - Extension for VAT-08/09, black
Extension for VAT-08/09, long: 180 mm, M10 thread, black
-
Fohhn VL-89 - Extension for VAT-08/09, white
Extension for VAT-08/09, long: 180 mm, M10 thread, white
-
Fohhn WAL-1 - Pair of L-brackets, black
Pair of L-brackets for Linea LX-100/150, DLI-130/230, LC-20/60/100/150/220 and LEN-20/60/100/150/220
-
Fohhn WAL-1 - Pair of L-brackets, white
Pair of L-brackets for Linea LX-100/150, DLI-130/230, LC-20/60/100/150/220 and LEN-20/60/100/150/220
-
PreSonus SL1602-RACK EAR - Rack adapter for SL 1602
Rack adapter for SL 1602
Délai habituel entre 2 et 4 semaines
41,78 CHF HT
45,16 CHF TTC en stock -
Rycote RYC185812 - PCS-Lite 5/8"
Designed with the MI industry in mind, the PCS-Lite is made from durable, non-reflective high-quality materials in neutral colors and comes with 5/8" threaded fittings, allowing for quick and easy microphone changes whilst maintaining a secure connection to your microphone stand. Perfect for use with the Invision-USM and other studio microphone shock mounts.
41,54 CHF HT
44,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Rycote RYC185800 - PCS-Organizer
Made from durable, high-quality materials in a non-reflective finish, this Professional Connection System will reduce time wasted on attaching and positioning microphone shock mounts, windshields, monitors and antennas, significantly improving efficiencies in your workflow.
41,54 CHF HT
44,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Rycote RYC185802 - PCS-Lite 3/8"
Made from durable, high-quality materials in a non-reflective finish, this Professional Connection System will reduce time wasted on attaching microphone shock mounts, windshields or lighting accessories to stands, arms or booms and improve efficiencies in your workflow.
41,54 CHF HT
44,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
-
-
Sennheiser Mobile Kit - Mini Tripod and Smartphone Clamp for Mobile Recording
Perfect for mobile journalists, YouTubers, vloggers, and more, the Sennheiser Mobile Kit is designed to provide stable mounting and easy positioning for your smartphone and existing microphone or wireless receiver.
Délai habituel entre 2 et 4 semaines
39,57 CHF HT
42,78 CHF TTC en stock -
Shape MICMO - Universal Camera Microphone Shock Mount
Universal Camera Microphone Shock Mount
Délai habituel entre 2 et 4 semaines
38,14 CHF HT
41,23 CHF TTC en stock -
-
Contrik RDL-ST-RRB1 - Mounting Kit for Stick-On
The ST-RRB1 Mounting Kit for Stick-On is a bracket mount that allows you to attach (1) Stick-On module to a rack rail or virtually any flat surface. The module slides into the bracket and snaps securely into place, making for easy insertion and removal as needed.
Délai habituel entre 2 et 4 semaines
37,98 CHF HT
41,06 CHF TTC en stock -
Yamaha STAGEPASMIXSTD - Microphone stand
Micstand for Stagepas300 Mixer, MG82CX, MG102C
Délai habituel entre 2 et 4 semaines
33,44 CHF HT
36,15 CHF TTC en stock -
Contrik RDL-EZ-UCB2 - Under-Counter Gear Mounting Brackets
The EZ-UCB2 are simple under-counter mounting brackets that can hold electronics. They were designed for mounting RDL's EZ Series of A/V components. The EZ-UCB2 is a great solution for creating a custom installation, especially in situations where you need to mount equipment under a shelf, counter, or desk.
Délai habituel entre 2 et 4 semaines
31,92 CHF HT
34,51 CHF TTC en stock -
Contrik RDL-SF-UCB2 - UnderCounterBracket pair for SysFlex
UnderCounterBracket pair for SysFlex
Délai habituel entre 2 et 4 semaines
31,92 CHF HT
34,51 CHF TTC en stock -
Contrik RDL-RM-FP2 - 2RU Filler Panel for 19" Rack
The RM-FP2 2RU Filler Panel for 19" Rack is a 1U blank panel designed for use with standard 19" racks and enclosures. Use this panel to fill unsightly gaps in your rack or to protect your equipment from foreign debris and dust.
Délai habituel entre 2 et 4 semaines
28,09 CHF HT
30,37 CHF TTC en stock -
Contrik RDL-SR-TB10 - Terminal Block Assembly for SR-4
The SR-TB10 Terminal Block Assembly for SR-4 is a 10-position terminal block designed for use with the SR-4 Stick-On series mounting rack. The block features a polycarbonate numbered label strip that facilitates managing connections. Use this unit to build a custom product with screw connections using a variety of RDL modules. Mounting screws for...
Délai habituel entre 2 et 4 semaines
26,20 CHF HT
28,32 CHF TTC en stock -
Contrik RDL-WB-2U - Universal Wall Box (Double)
WB-2U Universal Wall Box (Double) is a wall box that will accept many RDL modules and standard electrical control devices. It is sized to fit in double-wide international or U.S. standard wall and cabinet electrical openings. Two sets of knockouts ensure that the box will work with either metric or U.S. conduits. The unit mounts securely by means of side...
Délai habituel entre 2 et 4 semaines
25,63 CHF HT
27,71 CHF TTC en stock -
Contrik RDL-WB-1U - Universal Wall Box (Single)
The WB-1U Universal Wall Box (Single) is a wall box that will accept many single RDL modules and standard electrical control devices. It is sized to fit in international or U.S. standard wall and cabinet electrical openings. Two sets of knockouts ensure that the box will work with either metric or U.S. conduits. The unit mounts securely by means of side...
Délai habituel entre 2 et 4 semaines
23,80 CHF HT
25,73 CHF TTC en stock -
Rycote RYC185811 - Half Coupler Large 48-51mm w/3/8" Bolt
The large Rycote Half Coupler is an ideal solution for film, lighting, and sound crews who need to affix a mic, shockmount, windshield, or lighting accessory to a pole such as a truss, scaffolding, or rigging setup.
23,03 CHF HT
24,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Rycote RYC185806 - Half Coupler Small 32-35mm w/3/8" Bolt
Half Coupler Small 32-35mm w/3/8" Bolt
23,03 CHF HT
24,90 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Contrik RDL-FP-RRB1 - Rear Rack Rail Mounting Kit for Flat-Pak
The FP-RRB1 is a rear rack rail mounting kit designed to support any module from the Flat-Pak line of products.
Délai habituel entre 2 et 4 semaines
23,00 CHF HT
24,86 CHF TTC en stock -
Contrik RDL-RU-D1 - RACK-UP Adapter Mount for Decora D-Series Products
The RDL RU-D1 is a RACK-UP adapter for mounting one Decora product such as D-Series remote controls, connector plates, and loudspeakers. The durable laminated front panel matches the appearance of RDL RACK-UP products.
Délai habituel entre 2 et 4 semaines
22,52 CHF HT
24,34 CHF TTC en stock -
Yamaha RMA1MB - Rail Mount Adapter for VXS series M model
Rail Mount Adapter for VXS series M model
Délai habituel entre 2 et 4 semaines
22,00 CHF HT
23,78 CHF TTC en stock -
Yamaha SINGLE MOUNT - Stand adapter for Stagepas 150M (piece)
Yamaha presents the Stagepasmount Kit for Stagepas 150m/300.
Délai habituel entre 2 et 4 semaines
22,00 CHF HT
23,78 CHF TTC en stock -
-
Fohhn Support - 19" long mounting bracket, for one MA-4.100
19" long mounting bracket, for one MA-4.100
-
Contrik RDL-RM-FP1 - 1RU Filler Panel for 19" rack
The RM-FP1 1RU Filler Panel for 19" Rack is a 1U blank panel designed for use with standard 19" racks and enclosures. Use this panel to fill unsightly gaps in your rack or to protect your equipment from foreign debris and dust.
Délai habituel entre 2 et 4 semaines
20,66 CHF HT
22,33 CHF TTC en stock -
Contrik RDL-RU-SMA1 - Rack-Up Mounting Plate
The RU-SMA1 is a mounting plate designed for mounting a "Rack-Up" series module to any flat surface. It is ideal for mounting a module inside a cabinet or lecturn.
Délai habituel entre 2 et 4 semaines
20,42 CHF HT
22,07 CHF TTC en stock -
Contrik RDL-TX-RRB1 - Rear Rack Rail Mounting Kit for TX-Series
The TX-RRB1 is a mounting bracket that allows you to attach a TX module to a rear rack rail or any flat surface.
Délai habituel entre 2 et 4 semaines
19,88 CHF HT
21,49 CHF TTC en stock -
Contrik RDL-RU-FP1R - RACK-UP Filler Panel for Mounting Adapter
The RU-FP1R fills unused openings in any RACK-UP series mounting adapter.
Délai habituel entre 2 et 4 semaines
19,85 CHF HT
21,46 CHF TTC en stock -
PreSonus SL-AR8 RACK EAR - Rack Ear Kit for StudioLive AR8 Mixer
The Rack Ear Kit for StudioLive AR8 Mixer from Presonus is designed to allow you to rackmount your StudioLive AR8 USB 8-Channel hybrid performance and recording mixer.
Délai habituel entre 2 et 4 semaines
17,64 CHF HT
19,07 CHF TTC en stock -
PreSonus SL-AR12 RACK EAR - Rack Ear Kit for StudioLive AR12 Mixer
The Rack Ear Kit for StudioLive AR12 Mixer from Presonus is designed to allow you to rackmount your StudioLive AR12 USB 14-channel hybrid performance and recording mixer.
Délai habituel entre 2 et 4 semaines
17,64 CHF HT
19,07 CHF TTC en stock -
Contrik RDL-DRA-35T - TX series DIN Rail Adapter
The DRA-35T provides mounting for any RDL TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
Délai habituel entre 2 et 4 semaines
16,01 CHF HT
17,31 CHF TTC en stock -
Contrik RDL-EZ-FP1 - 1/6 Rack Width Filler Panel
The EZ-FP1 is a simple rack panel that occupies 1/6 of a rack's width. It was designed specifically for use in RDL's EZ Series EZ-RA6 Rack Adapter and the EZ-CC6 Component Chassis. The EZ-FP1 is a great solution for creating a custom installation, especially in situations where you need to fill in the extra little spaces in a rack for an ultra-finished look.
Délai habituel entre 2 et 4 semaines
15,96 CHF HT
17,25 CHF TTC en stock -
Contrik RDL-FP-CT1 - Locking Cable Tie Bracket for FP-RRA and FP-RRAH
The FP-CT1 is a mounting bracket that fits the mounting track on FP-RRA and FP-RRAH rack mount panels. The set screw allows the installer to secure the bracket into position. An FP-CT1 can be secured at each end of an installed FLAT-PAK module, thereby securing the FLAT-PAK in mobile installations. Slots in the front surface of the bracket allow the...
Délai habituel entre 2 et 4 semaines
13,49 CHF HT
14,58 CHF TTC en stock -
Manfrotto MICC2 - Microphone Clip Universal Spring
Rubber dampening system to absorb vibrations. Swiveling yoke has 3/8'' threaded hole
12,00 CHF HT
12,97 CHF TTC en stockDélai habituel entre 4 et 8 semaines
-
Contrik RDL-DMK-5 - Detachable Mounting Tabs Kit
The DMK5 includes a complete set of five detachable mounting tabs to mount RDL modules.
Délai habituel entre 2 et 4 semaines
9,77 CHF HT
10,56 CHF TTC en stock -
Contrik RDL-MB-3 - Mounting Kit
The MB-3 Mounting Kit is designed to mount ST Stick-On or TX series modules on an FP panel. The mounting piece can be fastened to the modules with screws. Once attached, the mount and the module slide into the FP-RRA/H track.
Délai habituel entre 2 et 4 semaines
9,71 CHF HT
10,50 CHF TTC en stock -
-
-
Sennheiser Profile Wireless Cold Shoe
The black Sennheiser Profile Wireless Replacement Cold Shoe Mount for Receiver does exactly what the name implies; it allows you to attach the dual-channel Profile wireless microphone receiver directly to your DSLR/mirrorless camera's cold shoe.
Délai habituel entre 2 et 4 semaines
7,58 CHF HT
8,19 CHF TTC en stock -
Contrik RDL-MB-1 - Mounting Kit
The MB-1 Mounting Kit is a set of (2) small mounting brackets designed to mount RU Rack-Up, ST Stick-On, or TX series modules to a flat surface. The brackets custom fit these modules. Screws secure the brackets to both the module and the mounting surface.
Délai habituel entre 2 et 4 semaines
5,83 CHF HT
6,30 CHF TTC en stock -
Contrik RDL-RM-DFP1 - Decora Filler Panel
The RM-DFP1 is a filler panel for unused cutouts in Decora style rack chassis such as the RM-D3 or the RM-D9. The RM-DFP1 is constructed of steel with a black powdercoat finish to match the appearance of the rack chassis.
Délai habituel entre 2 et 4 semaines
4,94 CHF HT
5,34 CHF TTC en stock -
Sennheiser Profile Wireless Clip Magnet
The Profile Wireless Replacement Clip Magnet for Transmitter from Sennheiser is a magnet mount for the clip-on transmitter. Place the magnet behind the fabric of your garment and the magnet on the back of the transmitter's clip will attach to it, allowing you to secure it without using the clip mechanism.
Délai habituel entre 2 et 4 semaines
4,21 CHF HT
4,55 CHF TTC en stock -
Contrik NRJ-NUT-MS - Nickel plated metal ring nut
Nickel plated metal ring nut
Délai habituel entre 2 et 4 semaines
0,43 CHF HT
0,46 CHF TTC en stock -
Contrik NRJ-NUT-MK - Ring nut, knurled, nickel-plated brass
Ring nut, knurled, nickel-plated brass
Délai habituel entre 2 et 4 semaines
0,28 CHF HT
0,30 CHF TTC en stock -
Contrik NRJ-NUT-B - Hexagonal black plastic nut
Hexagonal black plastic nut
Délai habituel entre 2 et 4 semaines
0,20 CHF HT
0,22 CHF TTC en stock -
Contrik NRJ-NUT-MN - Hexagonal metal nut
Hexagonal metal nut (for metal screw jack only)
Délai habituel entre 2 et 4 semaines
0,18 CHF HT
0,19 CHF TTC en stock
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
