Yamaha MG16 - 16-Input Mixer

Référence 180452

État : Neuf

16 CH, 10 mic, 4 line ST, Phantompower, 2-Band CH EQ, HPF & PAD, 8 Comp, 4 Groups, 4...

Prix constructeur :
573,00 CHF HT

Prix Visuals :

504,24 CHF

545,08 CHF TTC

Garantie : Garantie Visuals 24 mois Service interne : révision, réparation & backup.

Disponibilité :

Délai habituel entre 2 et 4 semaines

Prévenez-moi lorsque le produit est disponible

- +

SKU: 180452

Plus d'informations

Yamaha 16-Input Mixer

The MG16 from Yamaha is a compact mixer capable of sixteen simultaneous inputs and is ideal for performances, recordings lectures and more. The mixer features eight mono mic/line combo input channels, two stereo line input channels that can also be used as mono mic or line inputs (XLR and stereo 1/4" inputs), and two stereo line inputs with 1/4" and RCA jacks.

Channels 1-12 are each equipped with D-PRE mic preamps, 3-band EQ, pan control and a high-pass filter. The D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. Channels 1-8 each also feature 26dB attenuation switches for use with loud sound sources such as guitar amplifiers and drums.

The MG16 mixer has XLR and TRS stereo outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as additional TRS 1/4" stereo monitor outs for sending to powered speakers, amplifiers or devices such as digital recorders.

Features

- Four TRS auxiliary outputs with dedicated send level controls on each channel for routing aux mixes to external devices such as reverb units, monitor mixers and more

- Four group buses (two stereo) with overall level control fader and dedicated outputs for creating a sub mix such as a drum group, or for routing separate mixes to amplifiers, powered speakers or other external equipment

- 3-band EQ on channels 1-8 and 2-band EQ on channels 9-16

- Pan/balance control on each channel

- One-knob compressor on channels 1-8 to smooth out the dynamics of vocals and instruments to help them sit better in your mix

- Rugged metal chassis built to withstand wear and tear

- Internal universal power supply for worldwide use

	Specifications
	Phantom Power	+48 V switchable, channels 1 - 12
	Input Channels	8x mono [mic/line] 2x mono/stereo [mic/line] 2x stereo [line]
	Output Channels	2x stereo out 1x monitor out 1x headphone out 4x aux out 4x group out
	Bus	Stereo: 1 AUX: 4 GROUP: 4
	Pad	26 dB (mono)
	HPF	80 Hz, 12 dB/oct (mono/stereo: MIC only)
	Compressor	Threshold: +22 dBu to -8 dBu Ratio: 1:1 to 4:1 Output level: 0 dB to 7 dB Attack time: approx. 25 msec Release time: approx. 300 msec
	Equalizer	EQ high gain: +15 dB/-15 dB, frequency: 10 kHz shelving EQ mid gain: +15 dB/-15 dB, frequency: mono 250 Hz - 5 kHz peaking EQ low gain: +15 dB/-15 dB, frequency: 100 Hz shelving
	LED	Peak LED turns on when post EQ signal reaches 3 dB below clipping
	Total Harmonic Distortion	0.03% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.005% @ +24 dBu (1 kHz), GAIN knob: Min
	Frequency Response	+0.5 dB/-1.5 dB (20 Hz to 48 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: Min
	Equivalent Input Noise	-128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max)
	Residual Output Noise	-102 dBu (STEREO OUT, STEREO master fader: min)
	Crosstalk	-78 dB
	Power Requirement	AC 100 - 240 V, 50 / 60 Hz
	Power Consumption	30 W
	Dimensions	17.5 x 5.1 x 19.7" (444 x 130 x 500 mm)
	Net Weight	14.6 lb (6.6 kg)

BESOIN D'AIDE ?

GE : + 41 22 561 07 07
ZH : + 41 43 255 59 00
TI : + 41 91 985 25 11