|
Specifications
|
|
Analog Input
|
|
Input Connectors
|
Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm
Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm
Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm
Channels 9/10: 1x XLR, 2x RCA
Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack
|
Load Impedance
|
Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics
Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms nominal with lines
Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal
Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms mics nominal
Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms lines nominal
|
Input Level
|
Sensitivity
Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV)
Channel 1-4 (XLR, Line): -30 dBu (24.5 mV)
Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV)
Channel 1-4 (1/4", Line): -20 dBu (77.5 mV)
Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV)
Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV)
Channels 5-12 (XLR): -60 dBu (0.775 mV)
Channels 5-8 (1/4"): -20 dBu (77.5 mV)
Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV)
Nominal
Channel 1-4 (XLR, Mic): -43 dBu (5.48 mV)
Channel 1-4 (XLR, Line): -13 dBu (173 mV)
Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV)
Channel 1-4 (1/4", Line): -3 dBu (548 mV)
Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV)
Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV)
Channels 5-12 (XLR): -43 dBu (5.48 mV)
Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV)
Maximum Before Clip
Channel 1-4 (XLR, Mic): -15 dBu (138 mV)
Channel 1-4 (XLR, Line): +15 dBu (4.36 V)
Channel 1-4 (1/4", Mic): -5 dBu (436 mV)
Channel 1-4 (1/4", Line): +25 dBu (13.8 V)
Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV)
Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V)
Channels 5-12 (XLR): -15 dBu (138 mV)
Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V)
|
Analog Output
|
|
Output Connectors
|
Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced
Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced
Rec Out (L/R): 2x RCA unbalanced
|
Impedance
|
Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines
Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines
Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines
|
Output Level
|
Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping
Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping
Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping
|
Loudspeaker Outputs
|
|
Connectors
|
Speakers A/B: 2x Neutrik speakON NL4, 1/4" / 6.35 mm
|
Impedance
|
Actual Source Impedance: < 0.1 Ohms
For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers
|
Output Level
|
4 Ohm Speakers: 600 W (1 Hz THD+N < 1%), 710 W (1 kHz THD+N < 10% [CEA2006])
8 Ohm Speakers: 400 W (1 Hz THD+N < 1%), 500 W (1 kHz THD+N < 10% [CEA2006])
|
General
|
|
Output Power
|
1 kHz THD+N < 10% (CEA2006): 710 W + 710 W (4 Ohms), 500 W + 500 W (8 Ohms)
1 kHz THD+N < 1%: 600 W + 600 W (4 Ohms), 400 W + 400 W (8 Ohms)
|
Frequency Response
|
Frequency Response Refer to the nominal output level @ 1 kHz
Input to Speakers: +1/-3 dB (40 Hz to 20 kHz)
Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz)
|
THD + N
|
Input to Speakers (Mic/Line): 0.1% @ 10 W (40 Hz to 20 kHz)
Input to Speakers (Line - Channels 1-4) 0.04% @ 65 W (1 kHz)
Input to Stereo Out, Aux 1/2 Send (Mic/Line): 0.02% @ +14 dBu (20 Hz to 20 kHz)
Input to Stereo Out, Aux 1/2 Send (Line - Channels 1-4): 0.007% @ +20 dBu (1 kHz)
|
Hum & Noise
|
EIN: -117 dBu
Residual Output Noise
Input to Speakers: -70 dBu (40 Hz to 20 kHz, Stereo Master Level: min)
Input to Stereo Out, Aux 1/2 Sends: -82 dBu (20 Hz to 20 kHz, Stereo Master Level: min)
|
Crosstalk
|
(1 kHz): -85 dB
|
Input Channels
|
Mono (Mic/Line): 8
Stereo: (Line): 4
Total: 12
|
Output Channels
|
Speakers: A/B
Aux 1 Send
Aux 2 Send
Stereo Out: L/R
Rec Out: L/R
|
Bus
|
Stereo: 1
Aux: 2 (including FX)
|
Pad
|
Channels 1-4: 30 dB
|
Hi-Z Input
|
Channel 4: Supported
|
HPF
|
High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave
|
EQ Section
|
High: 10 kHz +15/-15 dB
Mid: 2.5 kHz +15/-15 dB
Low: 100 Hz +15/-15 dB
|
Compressor
|
Single knob compressor
|
Audio Level Meter
|
2x 12 Points LED Meter: (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, Peak)
|
Built-in Effects
|
SPX Algorithm: 24 programs
|
Output Channel Function
|
Graphic EQ
Speaker Processor
Feedback Suppressor
|
Phantom Power
|
+48 V
|
Footswitch Input
|
Effect mute on/off
|
Protection
|
Load Protection: DC-fault
Amplifier Protection: Overheat protection, overcurrent protection, integral power protection
Power Supply Protection: Overheat protection, overcurrent protection
|
Power
|
Power Requirements: 100-240 VAC, 50/60 Hz
Power Consumption: 45 W (Idle) / 250 W (1/8 power)
|
Operating Temperature
|
32 to 104°F / 0 to 40°C
|
Dimensions (W x H x D)
|
18.3 x 12.1 x 12.8" / 464.8 x 307.3 x 325.1 mm
|
Weight
|
20.9 lb / 9.5 kg
|