Tascam MX-8A - 10-Channel Matrix Mixer with DSP

1025812

Neuf

10-channel matrix mixer with DSP

Prix Visuals :

988,85 CHF


1 068,95 CHF TTC  

Rectangle
Garantie : garantie Garantie Visuals 12 mois
Service interne : révision, réparation & backup.

Disponibilité : clock

Délai habituel entre 4 et 6 semaines


Commandez maintenant, nous vous livrons dès que possible ou
contactez-nous pour connaitre les alternatives 022 561 07 07.

- +

1025812
En savoir plus  
Tascam 10-Channel Matrix Mixer With DSP

The MX-8A 8-Input / 8-Output Matrix Mixer with DSP from Tascam features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimization in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.

The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric EQ, auto level, ducking, and more. In addition, the output DSP offers 10-band EQ, high-pass filters, low-pass filters, delay, and limiter effects.

Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.


Features

- Matrix mixer with eight mic/line input channels and eight line output channels

- Euroblock terminals, which are optimal for permanent installations, used for input/output connectors

- Extensive onboard DSP for audio processing according to application and conditions

- Remote control via Ethernet possible

- USB audio interface supports easy recording and background music playback with a computer

- Support for serial control systems possible with built-in RS-232C connector

- RS-485 connector enables connection of a dedicated external controller

- Compact 1U rackmount size


 

 



Specifications



 



Format



44.1 kHz / 48 kHz, 16-Bit / 24-Bit



Connector



4-Pin USB b-Type



Transfer Rate



USB 2.0 High-Speed (480 Mbps)



Analog In



Connector: Euroblock (Balanced) 3.81 mm Pitch



Minimum Input Level



-70 dBu



Maximum Input Levels



Microphone: +26 dBu

Line: +24 dBu

Input Impedance: 2.2 kOhms or Higher



Analog Output



Connector: Euroblock (Balanced) 3.81 mm Pitch



Nominal Output Level



+4dBu (When Ref.Level Set to Other Than -9 dBFS)

+6dBu (When Ref.Level Set to -9 dBFS)



Maximum Output Level



Switchable:

+15 dBu (Ref.Level: -9 dBFS)

+18 dBu (Ref.Level: -14 dBFS)

+20 dBu (Ref.Level: -16 dBFS)

+22 dBu (Ref.Level: -18 dBFS)

+24 dBu (Ref.Level: -20 dBFS)



Output Impedance



200 Ohms or Lower



RS-485



Connector: RJ-45

Cables: Category 5e or Faster STP Cables



Ethernet



Connector: RJ-45

Transmission Protocol: TCP/IP

Ethernet Standard: 100BASE-TX

Cables: Category 5e or Faster STP Cables



Power



AC 100 to 240 V, 50/60 Hz



Power Consumption



21 W



Operating Temperature Range



32 to 104°F / 0 to 40°C



Dimensions (W x H x D)



19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm



Weight



6.6 lb / 3.0 kg




 


    Besoin d'aide,
    Besoin d'un financement,
    Appellez-nous !

  • GE : + 41 22 561 07 07
  • ZH : + 41 43 255 59 00
  • TI   : + 41 91 985 25 11

Menu