Aja 3G-SDI To SMPTE ST 2110 Video And Audio IP Encoder
IPT-10G2-SDI is designed to integrate traditional 3G-SDI video sources into SMPTE ST 2110 IP Video infrastructure.
The IPT-10G2-SDI receives baseband video plus up to 16 embedded audio channels over 3G-SDI, then formats the data for output as SMPTE ST 2110 over 10 GigE. Associated audio from the video stream is extracted, synchronized, and embedded into the SMPTE ST 2110 stream and also output on two channels of analog audio RCA.
2x 10 GigE SFP+ cages are provided, allowing “hitless switching” (ST 2022-7) redundancy protection for critical transmission environments.
IPT-10G2-SDI transmits a SMPTE ST 2110 essence from an incoming 3G-SDI input source. Providing two SFP+ cases for protection with "hitless switching" (ST 2022-7), it's rugged, fanless, Mini-Converter design is ideal for placement in a wide range of scenarios, from on-set to in the studio.
With new IP based facilities often requiring integration with traditional baseband sources, and with existing 3G/1.5G-SDI routers often at capacity while facilities undertake their transition to IP, IPT-10G2-SDI provides a solution for converting baseband camera, router or edit bay sources, and then formatting and transmitting via IP to provide that content to a range of destinations.
IPT-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration and firmware updates.
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
|
Specifications
|
|
Video Formats
|
(HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920x1080i 50, 59.94
(HD) 1280x720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
|
Video Quality
|
10-bit, 4:2:2, uncompressed
|
Media Transport Interfaces
|
SMPTE ST 2110 (-10, -20, -21, -30)
2x SFP+ Cages - SFPs not included
Recommended 10 GigE SFP+ modules:
Arista Networks SFP-10G-SR Compatible 10GBASE-SR
Fiberstore SFP-10GSR-85 10G SFP+ 850nm
Finisar FTLX1471D3BCL (for single mode 1310nm)
Mellanox MFM1T02A-SR 850nm 10G
|
Video Input Digital
|
1x 3G SDI BNC (single source, with loop through)
Up to 1080 60p, 4:2:2, 10-bits/pixel, YCbCr
|
Audio Input Digital
|
Up to 16-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
|
Audio Input Analog
|
2x RCA analog audio
Levels at -10 dBu (nominal)
|
Video Output IP
|
SMPTE ST 2110
Single video channel output
SMPTE ST 2022-7 dual stream output for hitless switching
Tx support for Narrow, Gapped Mode
|
Audio Output IP
|
SMPTE ST 2110
Up to 16 channels audio, 24-bit per channel, 48 kHz synchronous
1 ms or 125 µs packet interval
SMPTE ST 2022-7 dual stream input for hitless switching
|
Reference
|
1x BNC
|
Discovery, Registration and Control
|
NMOS Tx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0
Ember+ control (no discovery, control only)
AJA REST API control (discovery via SSDP or MDNS)
Supported over dedicated management Ethernet port and in-band over media ports
|
IP Clock
|
PTP support compliant with PTP PTPv2 / IEEE 1588-2008
SMPTE ST 2059-1 compliant
|
User Controls
|
1x RJ-45 for 10/100/1000 Base-T Ethernet
Web and REST clients supported for remote network setup and configuration
1x USB 2.0 Mini-B connector
AJA eMini-Setup supported for network setup
and configuration via local desktop computer
Web and REST configuration is also supported in-band over media ports
|
Size (w x d x h)
|
5.07" x 0.94" x 5.06" (128.8 x 23.9 x 128.4 mm)
|
Weight
|
0.6 lb (0.3 kg)
|
Power
|
5-20VDC Regulated, 13 Watts, Power supply required
|
Environment
|
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
|
