Aja Single Channel SMPTE ST 2110 Video And Audio IP Decoder
Monitor ST 2110 Video and Audio from anywhere on the Network
The IPR-10G2-SDI is a SMPTE ST 2110 to SDI Mini-Converter suited for point-of-use applications including source monitoring and 3G-SDI output to compatible devices. With two 3G-SDI outputs with mirrored source video, you can drive a display and connect to 3G-SDI simultaneously.
With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide SDI monitoring at the destination while feeding your video and audio further into a 3G-SDI chain.
The AJA IPR-10G2-SDI receives SMPTE ST 2110 IP video and audio, then formats the data for output over 3G-SDI.
The audio associated with the video stream is extracted, synchronized, and then embedded into the SDI interface as well as output on an analog RCA interface.
Workflow
IPR-10G2-SDI provides two SDI outputs from SMPTE ST 2110 video and audio over IP compatible devices. Combine your IPR-10G2-SDI units with AJA KONA IP (I/O card for use in desktop workstations) to instantly create a real-world ST 2110 workflow for video over IP production and monitoring.
User Control
IPR-10G2-SDI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates.
- 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
- HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
- Web and REST clients supported
- 1x USB 2.0 Mini-B (IEC 62680-1) connector
- AJA eMini-Setup of network parameters
Universal Power Supply
All AJA Mini-Converters ship with a universal power supply that includes international plug connections for use around the world.
Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.
|
Specifications
|
|
Video Formats
|
(HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920 x 1080i 50, 59.94
(HD) 1280 x 720p 50, 59.94, 60
(SD) 625i 50
(SD) 525i 59.94
|
Video Quality
|
10-bit, 4:2:2, uncompressed
|
Discovery, Registration and Control
|
NMOS
Ember Plus (no discovery, control only)
|
Media Transport Interfaces
|
SMPTE ST 2110
2x SFP+ Cages - SFPs not included
Recommended 10 GigE SFP+ modules:
Arista Networks SFP-10G-SR Compatible 10GBASE-SR
Fiberstore SFP-10GSR-85 10G SFP+ 850nm
Finisar FTLX1471D3BCL (for single mode 1310nm)
Mellanox MFM1T02A-SR 850nm 10G
|
Video Input IP
|
SMPTE ST 2110
Single channel input
Dual channel input for hitless switching (based on SMPTE ST 2022-7)
|
Video Output Digital
|
2x 3G SDI BNC (single source, mirrored output)
4:2:2 10-bits/pixel (embedded audio)
|
Audio Output Digital
|
Up to 8-Channel, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
|
Audio Output Analog
|
2x RCA analog audio
Levels at -10 dBu (nominal)
|
Reference
|
1x BNC
Analog Color Black or HD tri-level sync
Reference input is terminated into 75 ohms
|
User Controls
|
1x RJ-45 for 10/100/1000 Base-T Ethernet
Web and REST clients supported
1x USB 2.0 Mini-B connector
AJA eMini-Setup of network parameters via local desktop computer
|
Size (w x d x h)
|
5.07" x 0.94" x 5.06" (128.78 x 23.88 x 128.52 mm)
|
Weight
|
0.6 lb (0.3 kg)
|
Power
|
5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
|
Environment
|
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet)
|
