Au service des professionnels et passionnés
Sonnet USB3-PRO-4P10-E - Allegro Pro USB 3.1 PCIe Card With 4-10Gb charging ports
Add four 10 Gb/s USB 3.2 Gen 2 Type-A ports to your compatible Windows, Mac, or Linux system using the Allegro Pro 4-Port USB 3.2 Gen 2 Type-A PCIe Card from Sonnet. Built with a PCIe 2.0 x4 interface, this card features dual USB 3.2 Gen 2 controllers, each of which drives two of the USB ports. Data transfer speeds are supported up to 800 MB/s when one drive is connected, and up to 600 MB/s when two drives are connected. With all four ports in use, each port supports speeds up to 300 MB/s. Designed to be hot-pluggable and hot-swappable, this card may also be used in Thunderbolt 2 or Thunderbolt 3-to-PCIe card-expansion systems, including Sonnet's Echo Express and xMac.
Features
Four 10 Gb/s USB Type-A Ports
Adds four 10 Gb/s USB Type-A ports to your Mac Pro, Windows, or Linux computer with PCIe slots, or Thunderbolt-to-PCIe card-expansion system.
Dual USB 3.2 Gen 2 Controllers
Supports data transfers at up to twice as fast as USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), and boosts data transfer speeds between connected drives.
Powered Ports
Supports USB bus-powered SSD, SSD RAID, and hard drives with up to 7.5W power per port.
Supports Charge & Sync
Supports USB 3.0 charging port handshake, and will simultaneously sync and charge iPads and other devices that support USB 3.0 charging at 1.5A per device
Protected Power Delivery
Independent power regulation isolates each port to prevent cross-coupled power glitches that may cause accidental disconnects; resettable device overcurrent fuses protect the card and computer, and may be reset by a simple shutdown.
Add USB 3.2 Gen 2 to Thunderbolt Expansion Systems
Add four 10 Gb/s USB Type-A ports to Thunderbolt-to-PCIe card-expansion systems.
Easy Installation
Quick and easy user installation into an available PCIe slot.
Broad USB Device Support & Compatibility
Supports storage, hubs, and other USB-IF compliant USB devices.
|
Specifications |
|
Hardware |
|
|
Form Factor |
PCIe Computer Card |
|
Bus Interface |
PCI Express 2.0 x4 |
|
Peripherals Supported |
USB 3.2 Gen 2 (USB 3.1 Gen 2 / USB 3.1), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), USB 2.0, and USB 1.1 |
|
Bus-Powered Peripherals Supported |
- HDDs, SSDs, and SSD RAIDs |
|
Cables Supported |
- USB Type-A (10 Gb/s) |
|
Chipset |
2 x AS Media 3142 |
|
RoHS Compliant |
Yes |
|
USB Support |
|
|
Standard |
Complies with OHCI (Open Host Controller Interface), EHCI (Enhanced Host Controller Interface), and xHCI (eXtensible Host Controller Interface) standards |
|
UASP Support |
USB Attached SCSI Protocol Supported Under macOS 10.10 & 10.12+, Windows 10 |
|
USB Charging |
USB Battery Charging 1.2 Compliant (up to 7.5 W per port) |
|
Chipset Throughput |
20 Gb/s Combined Port Throughput |
|
Number of Devices Supported |
Up to 62 |
|
Hot Plug |
Supports Hot-Pluggable and Hot-Swappable Device Connections |
|
Boot Support |
No Computers Supporting Booting At This Time |
|
Compatibility |
|
|
Mac Compatibility |
- Mac Pro (3.1, 4.1, 5.1, or 7.1) |
|
Windows Compatibility |
- Computer with PCIe Slots |
|
Linux Compatibility |
- Computer with PCIe Slots |
|
Thunderbolt Compatibility |
- Supports USB 3.1 Peripherals on a Mac or Windows PC When Installed In a Thunderbolt 2 or Thunderbolt 3 PCIe Expansion System |
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
