Au service des professionnels et passionnés
Yamaha DXR8MKII - 8 inches 2-way Powered Loudspeaker
The Yamaha DXR8mkII is a 15" 1100W 2-Way active loudspeaker which provides clear audio and extremely high output levels in an unobtrusive and durable design, ideal for live sound applications that require wide bandwidth audio reproduction. The cabinet has a rugged ABS construction with a bass-reflex design for enhanced bass performance with reduced turbulence. The high-power 15" woofer and 1.75" compression tweeter offer high-resolution audio with a wide frequency response and deep bass. Integrated DSP uses a FIR-X linear phase filter for an ultra-smooth crossover, while the protection circuits optimize and protect driver performance.
The speaker has a biamplified Class-D design that provides a combined peak output power of 1100W for a strong performance with minimal distortion. The integrated D-contour processor allows you to use the speaker as a main/FOH speaker or as a stage monitor. The rear panel has XLR, 1/4", and RCA inputs, as well as XLR thru and output connectors for wide compatibility with a variety of professional sound systems and devices.
The speaker can be placed on a floor or stage, but also has useful mounting options. A dual 35mm pole socket allows you to mount the speaker on top of a subwoofer with horizontal or 7° tilt toward the floor, while M8 fly points allow suspended installation. An optional U-bracket is available separately for wall mounting. The Yamaha DXR8mkII ships with a power cord.
Features
- 8" powered loudspeaker with 1100W Class-D amplifier
- Achieves high SPL output with remarkable clarity throughout its frequency response
- 1.75" neodymium high-frequency compression driver and high-output 8" woofer which combine for a wide frequency response with powerful bass
- Frequency Range: 57 Hz to 20 kHz
- Max SPL: 130 dB
- Precision 48-bit DSP processing for clear high-definition sound and built-in D-Contour intelligent dynamic control
- Durable and compact ABS enclosure
- Symmetrical Design for mirror-mode floor monitoring
- FIR-X tuning
- Proprietary sound-processing technology utilizing a linear-phase FIR filter delivers high-quality sound at high resolution with a smooth frequency response that is unaffected by phase interference near the crossover point
- D-CONTOUR (Dynamic CONTOUR)
- D-CONTOUR is a multiband compressor that dynamically controls the level of each frequency range according to the application and human hearing characteristics
- FOH/MAIN: For use as a main speaker
- MONITOR: Optimized for use as a floor monitor
- Mixing/LINK functionality
- Features mixing functionality, enabling you to mix sounds by directly inputting three channel signals into the unit
- LINK function enables you to easily configure a stereo or dual-mono SR (Sound Reinforcement) system using two DXR mkIIs
- DSP-controlled advanced protection system
- Powerful protection circuits ensure secure protection in the speaker unit, amplifier unit, and power supply unit
- Protection functionality promotes optimal performance of each component and optimum reliability without distortion even in challenging environments
|
Specifications |
|
PA Speaker |
|
|
Configuration |
Active 2-Way |
|
Enclosure Type |
Bass-Reflex Loudspeaker |
|
Total Power Capacity |
1100 W Peak |
|
Amplifier Power Rating |
LF: |
|
Amplifier Class |
Class-D |
|
Drivers |
|
|
HF Driver |
1 x 1.75" / 44.45 mm Compression Driver with 1" / 25 mm Throat |
|
LF Driver |
1 x 8" / 20.32 cm Woofer |
|
LF Voice Coil |
2" / 5.08 cm |
|
Magnet |
HF: |
|
Performance |
|
|
Frequency Range |
57 Hz to 20 kHz -10 dB |
|
Maximum SPL |
130 dB SPL |
|
Coverage Angle |
90° H x 60° V (Horn) |
|
Input Sensitivity |
Line Input: |
|
Max Input Level |
Line Input: |
|
I/O Impedance |
XLR Mic Input: |
|
Protections |
AC Coupling, Crossover Overload, DC Fault |
|
Connectivity |
|
|
Audio I/O |
1 x XLR Input |
|
Signal Processing |
|
|
Crossover |
2.4 kHz |
|
Filters |
2 x High-Pass: |
|
Dynamic Processing |
Compression, Multiband Limiter |
|
Digital Signal Processing |
48-Bit DSP: FIR Filter, Venue Settings |
|
Max Sample Rate/Resolution |
48 kHz / 24-Bit |
|
Power |
|
|
AC Input Power |
Universal: |
|
AC Power Connector |
1 x IEC Input |
|
Power Consumption |
90 W |
|
Physical |
|
|
Mounting |
2 x M8 (Top) |
|
Handles |
1 x Top |
|
Cooling |
Fan (Variable Speed) |
|
Construction Material |
ABS |
|
Dimensions |
11 x 18 x 11" / 280 x 458 x 280 mm |
|
Weight |
28.2 lb / 12.8 kg |
|
Mounting |
2 x M8 (Top) |
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
