Au service des professionnels et passionnés
Tascam ML-4D/OUT-X - 4 Out Dante-Analog Converter with DSP Mixer, XLR
The ML-4D/OUT-X 4-Channel Line-Output Dante Converter with Built-In DSP Mixer from Tascam is a compact half-rack converter that can be used to convert 4-channel Dante input/output signals into 4-channel analog output signals on 3-pin XLR connectors for pro-audio applications.
The ML-4D/OUT-X features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide-area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets are included.
Features
- 4 analog outputs on 3-pin XLR connectors
- 4 Dante inputs/outputs
- Supports PoE (Power over Ethernet)
- Sample rate up to 24-bit / 96 kHz
- Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch
- Compatible with Dante Domain Manager and Dante AES67 mode
- Flexible scene preset function allows you to work in different area situations (up to 50 presets)
- Two types of user-control software available for Windows/Mac/iOS/Android devices:
- TASCAM DCP CONNECT, for integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
- TASCAM EZ CONNECT, for end-users: simple app design for only the necessary functions such as area-volume settings, etc.
- Remote control via Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor analog output signals
- Configurable reference level (via remote control only)
- Surface-mount adapters for installation under desks included
|
Specifications |
|
General |
|
|
Formats Supported |
44.1/48/88.2/96 kHz, 16/24-Bit, 4 Channels |
|
Input/Output |
|
|
Connector |
RJ-45 |
|
Transmission Protocol |
Dante |
|
Gigabit Ethernet |
1000 BASE-T (IEEE 802.3ab) |
|
Cable |
Category 5e or Faster STP Cables |
|
Analog Outputs |
|
|
Connector |
3-Pin XLR (1: Gnd, 2: Hot, 3: Cold) |
|
Nominal Output Levels |
+4 dBu (when Ref. Level Not −9 dBFS) |
|
Maximum Output Level |
Switchable: |
|
Output Impedance |
200 Ohms or Lower |
|
Audio Performance |
|
|
Frequency Response |
Dante In / Line Out: |
|
Distortion |
0.002 % (when −1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
|
Signal to Noise Ratio |
105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
|
Crosstalk |
100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
|
Dynamic Range |
108 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
|
Other Features |
|
|
Power |
PoE Class 0 |
|
Power Consumption |
4 W |
|
Operating Temperature |
32 to 104°F / 0 to 40°C |
|
Dimensions (W x H x D) |
8.4 x 1.8 x 5.4" / 21.4 x 4.4 x 13.6 cm |
|
Weight |
30.4 oz / 863 g |
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
