Au service des professionnels et passionnés
Sound-Devices CL-16 - Linear Fader Control for Scorpio & 8-Series
Designed for 8-series or Scorpio mixers, the Sound Devices CL-16 is a mixer controller that combines the functionality of a traditional channel strip with the power and versatility of modern digital mixers. Once you connect it to your mixer-recorder via the included USB Type-B to USB Type-A cable, you can use the CL-16 to control channels, outputs, menus, metadata, and even on-set communications, and thus, improve the experience of cart-based location mixing.
The CL-16 provides 16 Penny & Giles 100mm linear faders, which are considered some of the smoothest faders around. The unit also offers 16 dedicated trim pots and a panoramic LCD screen that is readable in sunlight. This display will handle much of the necessary read-out information from your 8-series mixer-recorder.
You'll find 32 multifunction controls for adjusting gains past channel 16, as well as for controlling bus gains, output gains, panning adjustments, and EQ. Five user-assignable buttons can be programmed to handle tasks you deem the most important, and built-in USB ports on the rear provide charging for phones, tablets, battery chargers, or other compatible gear. You'll find three USB Type-A and two USB Type-C ports.
Use the ten-pin remote input for custom wiring of LEDs and switches, and make use of the TRS footswitch input as well, for which a 1/4" cable has been supplied. You'll find two headphone jacks—one 1/4", and the other 3.5mm.
Features
- Compatible with the 888 and Scorpio at launch, with support for the 833 in a later firmware update
- 16 dedicated rotary trim controls
- 16 dedicated faders
- Channels 1 to 16 have dedicated, non-banking controls like a traditional analog console
- 32 multifunction rotary controls for EQ, pan, channels 17 to 32 gains, bus gains, output gains, and more
- Large, sunlight-readable LCD screen folds down for easy and safe storage and transport
- High-reliability, silent, soft-touch buttons for key functions like record, stop, metadata, coms, returns, and more
- Five user-assignable buttons
- Built-in 5-port USB hub with (two USB Type-C and three USB Type-A) for keyboards, SD-Remote tablet, and other USB peripherals
- 1/4” and 1/8” headphone jacks
- Remote 10-pin connector for custom wiring of LEDs and switches, along with 1/4” foot pedal input
- Connects via USB type-B
- 12 VDC powered via 4-pin XLR
- 16 ultra-smooth gliding Penny & Giles 100mm linear faders
- Quick bottom-panel access for field servicing of faders
|
Specifications |
|
Headphone Outputs |
1 x 1/4" Output |
|
Voltage |
0 to 18 VDC over XLR-4 (Available Separately) |
|
Current Draw |
Min: 560 mA Quiescent at 12 VDC in, All USB Ports Left Open |
|
USB |
USB Type-A Ports: 5 V, 1.5 A Each |
|
Ports |
Remote Port Power: 5 V, 1 A Available on Pin 10 |
|
Foot Switch |
1 kOhms, Typical |
|
Fader Range |
3.9" / 10.0 cm |
|
Dimensions (H x W x D) |
Screen Folded Down: 3.2 x 17.1 x 13.0" / 8.0 x 43.5 x 32.9 cm |
|
Weight |
10.4 lb / 4.7 kg |
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
