Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
WP-789R is a high-performance, long-reach HDBaseT wall-plate receiver for 4K@60Hz (4:2:0) HDMI and HDCP 2.2 signals over twisted pair.
USB type-C cable retractor for data, video, and charging
High-Speed HDMI 4K cable retractor with PT-3H2 signal extender
Round Table Connection Bus for Power Socket , USB Charging and Cable PassThroughs
Round Table Connection Bus - Sand-blasted Anodized Aluminum Top - Black
Round Table Connection Bus - Sand-blasted Anodized Aluminum Top - Silver
CAT 6 cable retractor with RJ-45 connector
USB 3.0 cable retractor with USB type-A connector
VGA cable retractor with VGA connector
Audio cable retractor with 3.5mm mini jack connector
DisplayPort cable retractor with DisplayPort connector
High-speed HDMI with Ethernet cable retractor with HDMI connector
The Sonifex CM-TC1 is a Commentator Unit Transport Case which can be used with the AVN-CU4-Dante. It can also be used with the CM-CU1 and CM-CU21 commentator units.
Podium Table Bus with Decora Wall-Plate and Inserts
TBUS-1-KWC adaptor for smart phones Wireless charger
TBUS-1-KWC adaptor for smart phones Wireless charger
The CM-TC2 is a Transport Case which can be used with anything you wish. The foam has push out blocks to make the cut out shape you require.
Round Table Mount 4 Cable Pass-Through - Black, Sand-blasted Anodized Aluminum Top
Round Table Mount 4 Cable Pass-Through - Silver, Sand-blasted Anodized Aluminum Top
TBUS Dual socket module with 1 Universal AC power socket and 2 USB charging ports
Two 5V DC USB Power Outlets - Provide up to 20W/4A of total power (shared between the two connectors) for charging mobile devices such as smartphones and tablets.
Two 5V DC USB Power Outlets - Provide up to 20W/4A of total power (shared between the two connectors) for charging mobile devices such as smartphones and tablets.
2 USB Charging in a power bracket module
Inner Frame for TBUS20XL (WAVES)
HDMI, 3.5mm Audio & USB-B Passive Wall Plate (White)
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate. WXA-H-D model supplied with DECORA design frame.
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang black
The AMS-HR6 is a mounting panel that allows you to mount up to 6 AMS-series accessories in a standard equipment rack. These accessories include switches, controls, indicators, and jacks.
FLF1 black, with push switch, illuminated, Off / AC, 10A, 230VAC
Mounting Panel for Four AMS Accessories
The Kramer OWB-3G 3 Gang On-Wall Box is a white plastic box that is used for installing a single 3 gang US wall plate (such as the WP-500). The box is mounted on the wall for applications where in-wall installation is not possible in US and non-US installations.
Dual Gang On Wall Box
3.5mm Audio Passive Wall Plate (White)
Frame For Wall Plate Inserts - 2 Gang
The On-Wall Box (Decora) is a white plastic box for installing a single 1 or 2 gang Decora wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
Frame for Wall Plate Inserts - 2 Gang
The On-Wall Box (EU) is a white plastic box for installing a single 1 or 2 gang European wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
The black DB-MJPT Mini-Jack Pass-Through Plate from RDL is a Decora style wall plate with a mini-jack input or output connector. It allows for quick installations of audio signals (such as computer or portable media player) via a mini-jack connection. The panel is suitable for mounting on a wall or in an RDL DC-1 Decora style countertop chassis.
A bracket for installing two inserts in a power socket opening.
TBUS Bracket to Install Four Inserts in a Dual Power Socket Opening
Bracket for 1Gang Decora
Panel for installing RC-8IR in TBUS-1A inner frame
Wall Plate Insert - HDMI
Wall Plate Insert - HDMI
Stereo Audio Wall Plate Insert
Wall Plate Insert - HDMI
Stereo Audio Wall Plate Insert
Dual Ethernet Wall Plate Insert
Dual Ethernet Wall Plate Insert
Stereo Audio Wall Plate Insert
Dual Ethernet Wall Plate Insert
Wall Plate Insert - RJ-45
G4K AC/DC Power Adapter
The On-Wall Box (Decora) is a white plastic box for installing a single 1 or 2 gang Decora wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
The On-Wall Box (EU) is a white plastic box for installing a single 1 or 2 gang European wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
Single Gang On Wall Box
KRT-4-M1 is a bracket for mounting KRT-4 cable retractor on the underside of a table.
Wall Plate Insert - DisplayPort
Wall Plate Insert - DisplayPort
Wall Plate Insert - 3.5mm Stereo Audio & RJ-45
Wall Plate Insert - DisplayPort
Wall Plate Insert - 3.5mm Stereo Audio & RJ-45
Wall Plate Insert - XLR (F)
Wall Plate Insert - DVI
Wall Plate Insert - XLR (F)
Wall Plate Insert - XLR (F)
Frame for Wall Plate Inserts - 1 Gang
Frame for Wall Plate Inserts - 1 Gang
Black Frame and Faceplate Set for Wall Plate
Black Frame and Faceplate Set for WP-789R Wall Plate
Wall Plate Insert - Two-Sized Cable Pass-Through
Mounting Plate-Set EDIZIOdue, plastic with connector plate; black, 88 x 88 mm
AMS is an accessory mounting system for jacks, indicators, switches and controls.
LF mounting plate black, with metal clamps, cutout for 1x D-Series versions, without plug. This mounting plate is supplied with screws and lock nuts.
Wall Plate Insert - Cable Pass-Through
Two-Sized Cable Pass-Through Wall Plate Insert
Wall Plate Insert - Cable Pass-Through
Dual Cable Pass-Through Wall Plate Insert.
Einsatz für Wandanschlussfeld - Doppelte Kabeldurchführung
Wall Plate Insert - Dual Cable Pass-Through - Gray
Wall Plate Insert - Dual Cable Pass-Through - White
Wall Plate Insert -Cable Pass-Through
Wall Plate Insert - Dual Cable Pass-Through - White
Mounting Plate-Set EDIZIOdue, plastic with connector plate; white, 88 x 88 mm
The AMS-PJ1 Power Jack Assembly is an accessory port for solder blocks; it allows 24VDC power supplies equipped with jacks to be included in your system. The port is specially designed to fit RDL's AMS-UF1 Universal Frame, an accessory mounting system for RACK-UP mounting bays.
The AMS-1RC Single Phono Jack is an accessory port for solder blocks. The jack is specially designed allow unbalanced audio or video jacks to fit into RDL's AMS-UF1 Universal Frame, an accessory mounting system for RACK-UP mounting bays.
The AMS-LEDB Blue LED Indicator is suitable for use with AMS mounts.
The AMS-LEDG Green LED Indicator is suitable for use with AMS mounts.
The AMS-LEDR Red LED Indicator is suitable for use with AMS mounts.
The AMS-LEDY Yellow LED Indicator is suitable for use with AMS mounts.
TBUS-1A Blank for IF/1XPS/1&3XTOOL(P/N:80-005299&80-005199)
For use with RDL SMB-3 and DC-3 for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
For use with RDL SMB-2, DC-2 and WB2U for mounting RDL remote controls and jack panels.
The AV-AC2 Cable Kit is a pair of dual 1/8" phono-to-stereo mini-plugs. The kit includes two adapter cables, and is ideal for replacing the AV-AC2 included with RDL's AV-PAK audio isolation module.
For use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.
For use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.