Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
This special white FLF mounting plate is assembled with two POAG-ID6 connectors. The POAG terminations (POAG = potential equalisation) are designed according to DIN 42801, and are mainly used in hospitals or other working areas to balance potentials between the human bodies, electronic equipment and other conductive parts.
This special black FLF mounting plate is assembled with two POAG-ID6 connectors. The POAG terminations (POAG = potential equalisation) are designed according to DIN 42801, and are mainly used in hospitals or other working areas to balance potentials between the human bodies, electronic equipment and other conductive parts.
Black in-wall mounting set EDIZIOdue, equipped with 2x gold-plated phono jacks (black/red) as feed-through female/female and one cover frame made of plastic.
HDMI, 3.5mm Audio & USB-B Passive Wall Plate (White)
Mounting Plate Set EDIZIOdue, plastic white, including: connector plate, assembled with 1x VGA Gender Changer f/f (15pole, D-Sub HD) and 2x Phono (black/red) gold-plated solder contacts.
White on-wall mounting set EDIZIOdue, equipped with one VGA 15-pole D-sub HD feed-through female/female, 2x gold-plated phono jacks (black/red) with solder contacts and one cover frame made of plastic. Dimensions: 74 x 74 x 54 mm.
The D-J3 is a wall mount mic/line input panel. The panel has a balanced XLR mic input and a pair of unbalanced RCA line inputs. The RCA inputs can be used in mono or stereo mode, are transformer isolated, and feature hum cancellation for clean audio. The rear of the panel has a balanced mic/line screw terminal output.
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate. WXA-H-D model supplied with DECORA design frame.
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate. WXA-H-D model supplied with DECORA design frame.
UTBUS-2XL including: 6 bands, User Manual & Quick Start
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate. WXA-H-D model supplied with DECORA design frame.
The D-J2 is a wall mount line-level input panel. The panel has a pair of RCA unbalanced inputs for mono or stereo use. The inputs are transformer isolated and feature hum cancellation for clean audio. The rear of the panel has a balanced line-level screw terminal output.
Mounting Plate-Set EDIZIOdue, plastic white, including: connector plate, assembled with 1x HDMI Gender Changer female/female, measurements 88 x 88 mm.
UP-EDIZIOdue, white, assembled with a short HDMI cable of almost 10 cm, female / female.
White on-wall mounting set EDIZIOdue, equipped with one short HDMI breakout cable 1.4 (female/female) of approx. 10 cm length and one cover frame made of plastic.
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang
Frame - Plastic for Wall Plate Inserts - 1 Gang black
EU-Size Black Frame
19" connector panel made of black anodised 3 mm thick aluminium, with 12x cut-outs for D-series chassis connectors. The unequipped panel of 1 RU comes with 1x pre-mounted aluminium cable tension relief, 4x rack screws and 1x labelling strap and 25x M3 screws (BN3333-BL).
19 '' connection panel made of black anodized, 3 mm thick aluminum, 1 U, with M3 thread and 16x cut-outs for built-in connectors of the D series. The panel is delivered with an installed aluminum bracket including 33x M3 screws (BN3333-BL), 4x rack screws and 1x labeling strips.
2 Single Power Sockets Slot, 3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through Inserts)
Black FLF mounting plate with one USB3 feed-through and one breakout cable female/female. Length: 18 cm.
Passive Wall Plate - HDMI
Passive Wall Plate - HDMI
HDMI Passive Wall Plate
White in-wall mounting set EDIZIOdue, equipped with 2x gold-plated phono jacks (black/red) as feed-through female/female and one cover frame made of plastic.
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
2 Single Power Sockets Slots, 2 Insert Slots, 2 Fixed 15-pin HD (PC), 2 Fixed RJ-45 (Ethernet), 2 Fixed 3.5mm (Audio, 2 Fixed USB-A
2 Single Power Socket Slots, 3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through Inserts)
2 Single Power Sockets Slots, 2 Fixed 15-pin HD (PC), 2 Fixed USB-A, 2, Fixed RJ-45 (Ethernet), 2 Fixed3.5mm (Audio)
The T3F inner frame comes in three different configurations that can hold a single power socket, single or double inserts or fixed cable pass-throughs.
1 Power Socket Slot, 1 Fixed 15-pin HD (PC), 1 Fixed USB-A, 1 Fixed RJ-45 (Ethernet), 1 3.5mm (Audio)
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
The T1AF inner frame comes in six different configurations that can hold single or double power sockets, single or double inserts, long inserts and Kramer Tools.
The T10F inner frame comes in two different configurations: one with one dual and one single power sockets, two blank inserts and one cable pass-through (T10F-33), and one with two single power sockets, one blank insert, one cable pass-through and a slot for SID-X1N (or Kramer MegaTOOL) (T10F-22M).
The T10F inner frame comes in two different configurations: one with one dual and one single power sockets, two blank inserts and one cable pass-through (T10F-33), and one with two single power sockets, one blank insert, one cable pass-through and a slot for SID-X1N (or Kramer MegaTOOL) (T10F-22M).
This special FLF mounting plate is assembled with a POAG-ID6 connector. The POAG terminations (POAG = potential equalisation) are designed according to DIN 42801, and are mainly used in hospitals or other areas to balance potentials between the human bodies, electronic equipment and other conductive parts. Black
This special FLF mounting plate is assembled with a POAG-ID6 connector. The POAG terminations (POAG = potential equalisation) are designed according to DIN 42801, and are mainly used in hospitals or other areas to balance potentials between the human bodies, electronic equipment and other conductive parts. White
The AMS-HR6 is a mounting panel that allows you to mount up to 6 AMS-series accessories in a standard equipment rack. These accessories include switches, controls, indicators, and jacks.
100-240V AC, 50/60Hz, 5A Maximum 5A/2.5A per power outlet
TBUS Power Socket Modules Universal
White on-wall mounting set EDIZIOdue, equipped with one VGA 15-pole D-sub HD feed-through female/female and one cover frame made of plastic. Dimensions 74 x 74 x 54 mm.
FLF1 black, with push switch, illuminated, Off / AC, 10A, 230VAC
The T3F inner frame comes in three different configurations that can hold a single power socket, single or double inserts or fixed cable pass-throughs.
The T3F inner frame comes in three different configurations that can hold a single power socket, single or double inserts or fixed cable pass-throughs.
1 Power Socket Slot, 3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through Inserts)
White FLF mounting plate with one USB3 feed-through and one breakout cable female/female. Length: 18 cm.
FLF black fitted with DVI-I carrying female / female
White FLF mounting plate, fitted with 2x 75 Ohm BNC feed-throughs female/female.
Black FLF mounting plate, fitted with 2x 75 Ohm BNC feed-throughs female/female.
FLF mounting plate white, with metal clamps, fitted with 1 x 3.5 mm jack stereo and 1 x VGA (D-Sub 15 pole HD) carrying female / female
FLF mounting plate black, with metal clamps, packed with 1 x 3.5 mm jack stereo and D-Sub 15pin. HD carrying female / female
White FLF mounting plate, equipped with 2x gold-plated phono jacks (black/red) with solder terminals and one VGA 15-pole D-sub HD feed-through female/female.
FLF white fitted with HDMI carrying female / female
FLF mounting plate black set, fitted with HDMI carrying female / female
19 '' connection panel with 16 cutouts for Neutrik BNC built-in connectors. The front panel is 1 U high and is made of black anodized, 3 mm thick aluminum. The panel is delivered unequipped with mounted aluminum bracket, 4x rack screws and 1x labeling strips.
Mounting Panel for Four AMS Accessories
Mounting Plate Set EDIZIOdue, plastic white, including: connector plate, assembled for 2 Loudspeaker-connection with terminal strip
Black in-wall mounting plate STANDARDdue made of high-quality thermosetting material, with one D-series cut-out and one cover frame with a diameter of 58 mm. The inner mounting frame is made of steel. The dimensions of 90 x 90 mm cover wall excavations easily.
Black FLF mounting plate, assembled with a short HDMI cable, 10 cm female / female.
The UTBUS-1xl is the enclosure of a new modular system. A complete UTBUS system requires the enclosure, a power socket, inserts and a power cord.
Wall Plate insert - USB3.0 Type C(F) to Type A(F) Cable
Wall Plate insert - USB3.0 Type C(F) to Type A(F) Cable
The Kramer OWB-3G 3 Gang On-Wall Box is a white plastic box that is used for installing a single 3 gang US wall plate (such as the WP-500). The box is mounted on the wall for applications where in-wall installation is not possible in US and non-US installations.
White FLF mounting plate, assembled with a short HDMI cable, 10 cm female / female.
FLF mounting plate white, with metal clamps, fitted with 3.5 mm jack cable stereo (25 cm) and 1 x VGA (D-sub 15 pole HD) carrying female / female.
FLF mounting plate black, with metal clamps, fitted with 3.5 mm jack cable stereo (25 cm) and 1 x VGA (D-Sub 15 pole HD) carrying female / female.
White FLF mounting plate, equipped with one silver-plated 3.5 mm stereo mini jack with breakout cable of approx. 10 cm length on the rear side.
Black FLF mounting plate, equipped with one silver-plated 3.5 mm stereo mini jack with breakout cable of approx. 10 cm length on the rear side.
In-wall mounting plate EDIZIOdue with 1 cut-out for 1 powerCON TRUE1, mounting plate with M3 thread, white plastic, dimensions: 88x88 mm.
Black FLF mounting plate as carrying female / female, fitted with 2x gold-plated RCA jacks (black / red).
White FLF mounting plate as carrying female / female, fitted with 2x gold-plated RCA jacks (black / red).
100-240V AC, 50/60Hz, 5A. Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A. Maximum 5A per power outlet
100-240V AC, 50/60Hz, 5A. Maximum 5A per power outlet
Dual Gang On Wall Box
3.5mm Audio Passive Wall Plate (White)
TBUS Power Socket - Universal
The On-Wall Box (Decora) is a white plastic box for installing a single 1 or 2 gang Decora wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
The On-Wall Box (EU) is a white plastic box for installing a single 1 or 2 gang European wall plate. The box is mounted on the wall for applications where in-wall installation is not possible.
Frame for Wall Plate Inserts - 2 Gang
Frame For Wall Plate Inserts - 2 Gang
Mounting Box-Set EDIZIOdue, plastic including: connector plate, with two mounting holes for D-Serie connector types (XLR, BNC, EtherCon, Phono (RCA), Jack, Speakon, etc.). Measurements: 74 x 74 x 54 mm.
White FLF mounting plate, equipped with one silver-plated 3.5 mm stereo mini jack with solder terminal.
Black FLF mounting plate, equipped with one silver-plated 3.5 mm stereo mini jack with solder terminal.
Mounting Plate Set EDIZIOdue, plastic black, including: connector plate, with two mounting holes for D-Serie connector types. The mounting plate has M3 threads and isolates to the ground plate. Measurements 88 x 88 mm. This mounting plate is supplied with screws.
Mounting Box-Set EDIZIOdue, plastic including: connector plate, with one mounting hole for D-Series connector types (XLR, BNC, EtherCon, Phono (RCA), Jack, Speakon, etc.). Measurements 74 x 74 x 54 mm.
The black DB-MJPT Mini-Jack Pass-Through Plate from RDL is a Decora style wall plate with a mini-jack input or output connector. It allows for quick installations of audio signals (such as computer or portable media player) via a mini-jack connection. The panel is suitable for mounting on a wall or in an RDL DC-1 Decora style countertop chassis.
Mounting Plate Set EDIZIOdue, plastic grey, including: connector plate, with two mounting holes for D-Serie connector types. The mounting plate has M3 threads and isolates to the ground plate. Measurements 88 x 88 mm. This mounting plate is supplied with screws.
Mounting Plate Set EDIZIOdue, Plastic Dark Gray
Mounting Plate Set EDIZIOdue, black plastic, including: connector plate, with one mounting hole for D-Serie connector types (XLR, BNC, EtherCon, Phono (RCA), Jack, Speakon, etc.). The mounting plate has M3 threads and isolates to the ground plate. Measurements 88 x 88 mm. This mounting plate is supplied with screws.
White in-wall mounting plate STANDARDdue made of high-quality thermosetting material, with one D-series cut-out and one cover frame with a diameter of 58 mm. The inner mounting frame is made of steel. The dimensions of 90 x 90 mm cover wall excavations easily.
FLF mounting plate black, with metal clamps equipped with 1 x VGA (D-Sub 15 pole HD) carrying female / female
FLF mounting plate white, with metal clamps equipped with 1 x VGA (D-Sub 15 pole "HD") carrying female / female
The WU-2AA is a single wall plate insert with two USB 2.0 Type A ports and two cables with USB Type A connectors at the rear.
The WU-2AA is a single wall plate insert with two USB 2.0 Type A ports and two cables with USB Type A connectors at the rear.