Au service des professionnels et passionnés
Filtres
Filtre
Liste des produits Steadicam
Steadicam is a brand of camera stabilizer mounts for motion picture cameras invented by Garrett Brown and introduced in 1975 by Cinema Products Corporation. It mechanically isolates the camera from the operator's movement, allowing for a smooth shot,
Steadicam is a brand of camera stabilizer mounts for motion picture cameras invented by Garrett Brown and introduced in 1975 by Cinema Products Corporation. It mechanically isolates the camera from the operator's movement, allowing for a smooth shot, even when the operator moves over an irregular surface.
-
Steadicam AXIS-GM - Axis Electronic-Assisted Stabilizer (Gold Mount)
This electronically assisted, 3-axis camera stabilizer enables the operator to directly control the framing of the shot without feeling disconnected from the camera.
Délai habituel entre 2 et 4 semaines
10 496,28 CHF HT
11 346,48 CHF TTC en stock -
Steadicam AXIS-VL - Axis Electronic-Assisted Stabilizer (V-Mount)
This electronically assisted, 3-axis camera stabilizer enables the operator to directly control the framing of the shot without feeling disconnected from the camera.
Délai habituel entre 2 et 4 semaines
10 496,28 CHF HT
11 346,48 CHF TTC en stock -
Steadicam SDMRS-A30VK - Steadimate-rs System a-30 Arm & Vest
The Steadimate-RS Aero 30 Arm and Zephyr Vest Kit from Steadicam converts your DJI RS 2, RS 3, RS 3 Pro, or RS 4 Pro handheld gimbal into a body-worn stabilizer system. This kit provides the gimbal yoke, post assembly, and balance stud from the Steadimate-RS, along with the required stabilizer arm and vest to complete your setup.
Délai habituel entre 2 et 4 semaines
3 494,16 CHF HT
3 777,19 CHF TTC en stock -
Steadicam SDMRS-A15VK - Steadimate-rs System a-15 Arm & Vest
The Steadimate-RS Aero 15 Arm and Aero Vest Kit from Steadicam converts your DJI RS 2, RS 3, RS 3 Pro, or RS 4 Pro handheld gimbal into a body-worn stabilizer system. This kit provides the gimbal yoke, post assembly, and balance stud from the Steadimate-RS, along with the required stabilizer arm and vest to complete your setup.
Délai habituel entre 2 et 4 semaines
1 628,40 CHF HT
1 760,30 CHF TTC en stock -
Steadicam 011-0440 - Hard Case, Zephyr Arm & Vest
The Steadicam Hard Case for Zephyr Arm and Vest is custom made to fit your steady gear, protecting it from impact and damage during transport and storage.
Délai habituel entre 2 et 4 semaines
950,82 CHF HT
1 027,84 CHF TTC en stock -
Steadicam 825-7550-01 - AERO VL Battery Mount
This V-Mount Battery Plate from Steadicam is designed to attach to the Steadicam AERO 15 or AERO 30 stabilizer and support V-Mount batteries to power the stabilizer. The plate also features a D-Tap output for powering accessories.
Délai habituel entre 2 et 4 semaines
757,62 CHF HT
818,99 CHF TTC en stock -
Steadicam 825-7550 - Assy, 7" 2200nit Hd Lcd Monitor W-mount
Assy, 7" 2200nit Hd Lcd Monitor W-mount
Délai habituel entre 2 et 4 semaines
698,28 CHF HT
754,84 CHF TTC en stock -
Steadicam 078-7393-01 - Low Mode Kit: F-Bracket & Handle Clamp
Low mode handle clamp and F-bracket.
Délai habituel entre 2 et 4 semaines
547,86 CHF HT
592,24 CHF TTC en stock -
Steadicam 802-7417 - Small Stage Camera Mounting Plate
The STEADICAM Camera Dovetail Plate Assembly for Medium Stage from Tiffen includes a rack for fore-aft adjustment.
Délai habituel entre 2 et 4 semaines
500,94 CHF HT
541,52 CHF TTC en stock -
Steadicam FGS-900045A - Heavy-Duty Balancing Stand with 5/8" Baby Pin
The Heavy-Duty Balancing Stand with 5/8" Baby Pin from Steadicam is a versatile, height-adjustable, three-section stand with a steel leg and riser, a wide 3.18' footprint, and boasting a branded Steadicam carry handle.
Délai habituel entre 2 et 4 semaines
495,42 CHF HT
535,55 CHF TTC en stock -
Steadicam SDMRS-GIM - Steadimate-rs Gimbal Weight & Spud
Designed for select DJI RS gimbal stabilizers, the Steadimate-RS Gimbal Yoke, Base, and Balance Stud from Steadicam provides you with the tools needed to attach your gimbal to a body-worn system.
Délai habituel entre 2 et 4 semaines
460,92 CHF HT
498,25 CHF TTC en stock -
Steadicam 825-7300-04 - Aero Canon LP-E6 Battery Mount
This is a Canon LP-E6 Battery Mount from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 Stabilizer and support Canon LP-E6 batteries to power the stabilizer.
Délai habituel entre 2 et 4 semaines
349,14 CHF HT
377,42 CHF TTC en stock -
Steadicam 825-7300-01 - Aero VL Battery Mount, W/D-Tap
This is a V-Mount Battery Plate from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 stabilizer and support V-Mount batteries to power the stabilizer.
Délai habituel entre 2 et 4 semaines
349,14 CHF HT
377,42 CHF TTC en stock -
Steadicam 825-7300-02 - Aero AB Battery Mount, W/D-Tap
This is a Gold-Mount Battery Plate from Steadicam designed to attach to the Steadicam AERO 15 or AERO 30 stabilizer and support Gold-Mount batteries to power the stabilizer.
Délai habituel entre 2 et 4 semaines
349,14 CHF HT
377,42 CHF TTC en stock -
Steadicam AXIS-CASE - Carry Case for Axis Sled
Carry Case for Axis Sled
Délai habituel entre 2 et 4 semaines
291,18 CHF HT
314,77 CHF TTC en stock -
Steadicam FGS-900046A - Balancing Stand Wheels Set
The Heavy-Duty Balancing Stand with 5/8" Baby Pin & Wheel Set from Steadicam is a versatile, height-adjustable, three-section stand with a steel leg and riser, a wide 3.28' footprint, and boasting a branded Steadicam carry handle.
Délai habituel entre 2 et 4 semaines
262,20 CHF HT
283,44 CHF TTC en stock -
Steadicam 802-0046 - Accessory Cable, 24v, Open End, Lemo Ob
24 volt power cable with one 3-pin Lemo connector and open end.
Délai habituel entre 2 et 4 semaines
231,84 CHF HT
250,62 CHF TTC en stock -
Steadicam 300-7901 - Low Mode F-bracket, 1/2" Post
Steadicam Low Mode F Bracket: Used with Cage for Flyer Stabilization System.
Délai habituel entre 2 et 4 semaines
231,84 CHF HT
250,62 CHF TTC en stock -
Steadicam 078-7351-01 - Cable
The 12 volt power cable is a versatile accessory that is compatible with a variety of devices. It features a 3-pin Lemo (0B) connector on one end and a female XLR connector on the other, making it easy to connect to different equipment.
Délai habituel entre 2 et 4 semaines
227,70 CHF HT
246,14 CHF TTC en stock -
Steadicam 850-7350-01 - Gold Mount Battery Mount
Large Dovetail V-Lock Battery Mount
Délai habituel entre 2 et 4 semaines
146,28 CHF HT
158,13 CHF TTC en stock -
Steadicam 850-7350-02 - V-lock Battery Mount
Large Dovetail Anton Bauer Battery Mount
Délai habituel entre 2 et 4 semaines
146,28 CHF HT
158,13 CHF TTC en stock -
Steadicam 807-7970 - Bag for AERO Solo or Zephyr Vest
This Steadicam Bag for AERO Solo or Zephyr Vest is designed and manufactured to carry your vest securely and safely, while the wide zippered opening makes it easy to remove and replace the vest.
Délai habituel entre 2 et 4 semaines
102,12 CHF HT
110,39 CHF TTC en stock -
Steadicam 825-7420 - Aero Camera Plate (Spare)
The Steadicam AERO Camera Plate is compatible with the sled of both the AERO 15 and AERO 30 stabilizer systems. It's a dovetail plate that mounts the camera on the top stage of the sled.
Délai habituel entre 2 et 4 semaines
99,36 CHF HT
107,41 CHF TTC en stock -
Steadicam 800-7970 - Assy Weight, 1 Lb W/1/4-20 Threads
The 1 lb Assembly Weight from Steadicam is used to balance your video setup. It can be added above or attached directly to the bottom of the Archer2 and Zephyr Camera Stabilizing Systems.
Délai habituel entre 2 et 4 semaines
80,04 CHF HT
86,52 CHF TTC en stock -
Steadicam 850-7916 - Steadicam Axis, Additional Weight Kit 4x 1/4lb/ 2x 1/2lb
Steadicam Axis, Additional Weight Kit 4x 1/4lb/ 2x 1/2lb
Délai habituel entre 2 et 4 semaines
52,44 CHF HT
56,69 CHF TTC en stock -
Steadicam 078-4122-01P - BNC Video Cable (24")
Connect your camera to your sled with this BNC Video Cable from Steadicam. This cable features BNC male connectors on each end and allows you to connect your camera to a Steadicam Ultra2c, Ultra 2, Ultra, Phantom, or Clipper 312.
Délai habituel entre 2 et 4 semaines
46,92 CHF HT
50,72 CHF TTC en stock -
Steadicam 807-7960 - Bag for Aero A-15 or Steadimate A-30 Arm
This Steadicam Bag for Aero A-15 or Steadimate A-30 Arm is designed and manufactured to carry your arm securely and safely, while the wide zippered opening makes it easy to remove and replace the arm. It features a single sewn strap for carrying.
Délai habituel entre 2 et 4 semaines
44,16 CHF HT
47,74 CHF TTC en stock -
Steadicam 807-7275-01 - Arm Drop Pin
Replacement aircraft pin for Steadicam Aero and Zephyr A-30 Arm.
Délai habituel entre 2 et 4 semaines
41,40 CHF HT
44,75 CHF TTC en stock -
Steadicam 807-7275-02 - Arm Drop Pin
Drop Pin, Quick Release 3.5" (a-15 Arm)
Délai habituel entre 2 et 4 semaines
41,40 CHF HT
44,75 CHF TTC en stock -
Steadicam FFR-000014 - Steadicam Sandbag (Sand Not Included)
The Steadicam FFR-000014 is a sand bag for stabilization of static equipment. This sand bag can be used as ballast on a C-Stand or other stand used for Steadicam docking.
Délai habituel entre 2 et 4 semaines
37,26 CHF HT
40,28 CHF TTC en stock -
Steadicam 801-7920-06 - End Weight W/ O-ring Zephyr, 3/8" Thread
End weight for Steadicam Merlin Stabilizer System
Délai habituel entre 2 et 4 semaines
34,50 CHF HT
37,29 CHF TTC en stock -
Steadicam 801-7920-04 - Start Weight W/ O-ring Zephyr, 3/8" Thread
The Steadicam 801-7920-04 is a starting weight that fits on the end portion of the Merlin System. This weight is the initial weight with the Merlin stabilizer and works for small cameras. An O-ring is included for security after balance has been achieved.
Délai habituel entre 2 et 4 semaines
34,50 CHF HT
37,29 CHF TTC en stock -
Steadicam 801-7920-05 - Middle Weight W/ O-ring Zephyr, 3/8" Thread
The Steadicam 801-7920-05 is a weight option that fits on the middle portion of the Merlin System. This weight works for specific applications where a larger piece of equipment or monitor is added to the system.
Délai habituel entre 2 et 4 semaines
34,50 CHF HT
37,29 CHF TTC en stock -
Steadicam 850-0100 - Axis Gimbal Cable
Axis Gimbal Cable
Délai habituel entre 2 et 4 semaines
28,98 CHF HT
31,33 CHF TTC en stock -
Steadicam FFR-000013 - Toolbag (Tools Not Included)
The Steadicam FFR-000013 is a cloth, zippered bag. This bag is made of strong materials offering a transport capability for tools needed to assemble and adjust Steadicam Stabilization Systems.
Délai habituel entre 2 et 4 semaines
24,84 CHF HT
26,85 CHF TTC en stock -
Steadicam 816-7923-03 - 3/4" Arm Post Insert Steadimate
The 3/4" Steadicam Arm Post & Vest Adapter for Motorized Gimbals & Steadimate System helps take the weight of your motorized gimbal from the operator's arm and transfer it to your body, allowing you to avoid fatigue and shoot for longer durations.
Délai habituel entre 2 et 4 semaines
22,08 CHF HT
23,87 CHF TTC en stock -
Steadicam 816-7927-03 - 3/4" Balance Spud Steadimate
The 3/4" Steadicam Arm Post & Vest Adapter for Motorized Gimbals and Steadimate System helps take the weight of your motorized gimbal from the operator's arm and transfer it to your body, allowing you to avoid fatigue and shoot for a longer duration.
Délai habituel entre 2 et 4 semaines
19,32 CHF HT
20,88 CHF TTC en stock -
Steadicam 078-4122 - Cable, Video 12" BNC/BNC
Male BNC to male BNC video cable.
Délai habituel entre 2 et 4 semaines
16,56 CHF HT
17,90 CHF TTC en stock -
Steadicam 078-1121 - Camera Mnt Screw, 1/4-20
1/4"-20 Stainless steel camera mounting screw.
Délai habituel entre 2 et 4 semaines
11,04 CHF HT
11,93 CHF TTC en stock -
Steadicam 821-7910 - Aero Balance Weight 1/4 Lb 1/4-20 Thread (Spare)
Aero Balance Weight 1/4 Lb 1/4-20 Thread (Spare)
Délai habituel entre 2 et 4 semaines
11,04 CHF HT
11,93 CHF TTC en stock -
Steadicam 078-1122 - Camera Mnt Screw, 3/8-16
3/8"- 16 Stainless steel camera mounting screw.
Délai habituel entre 2 et 4 semaines
9,66 CHF HT
10,44 CHF TTC en stock -
Steadicam 601-7411 - 1/4-20 to 3/8" Camera Mounting Spacer
Steadicam's 1/4-20" Spacer is a 1/4-20" spacer for the Steadicam Solo System.
Délai habituel entre 2 et 4 semaines
8,28 CHF HT
8,95 CHF TTC en stock -
Steadicam 900-1035 - Balance Weight
Additional Weights for the Steadicam Axis. 1/4-20 thread attachment.
Délai habituel entre 2 et 4 semaines
6,90 CHF HT
7,46 CHF TTC en stock -
Steadicam 900-1036 - Balance Weight
Balance Weight, 1/2lb / 228g, 1/4-20
Délai habituel entre 2 et 4 semaines
6,90 CHF HT
7,46 CHF TTC en stock
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
