Au service des professionnels et passionnés
Filtres
UMB-1 Universal Mattebox (Clamp On)
2 pièce (s) en stock
Battery Slide Pro V-Mount (RED Komodo)
3 pièce (s) en stock
Battery Swing
1 pièce (s) en stock
Gimbal Handle Bar Bracket (V-Mount)
1 pièce (s) en stock
Wooden Camera - WC V-Mount (RED DSMC1, DSMC2)
1 pièce (s) en stock
Unified Baseplate (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500)
2 pièce (s) en stock
The Battery Slide Pro V-Mount for Sony FX9 from Wooden Camera attaches to the rear of the camera and supports a V-mount battery while leaving access to the camera's standard battery compartment.
2 pièce (s) en stock
WC Pro V-Mount (3x D-Tap)
1 pièce (s) en stock
Sony A7/A9 Unified Accessory Kit (Advanced)
1 pièce (s) en stock
Top Handle V2 (2" Slotted Screw Channel).
1 pièce (s) en stock
Wooden Camera - Quick Back v2
1 pièce (s) en stock
Canon C200 / C200B PL Modification Kit
1 pièce (s) en stock
Wooden Camera - Rod Clamp (15mm LW)
1 pièce (s) en stock
Wooden Camera - 15mm Tube Clamp
4 pièce (s) en stock
Touch and Go Plate Only (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
1 pièce (s) en stock
Canon C-Series Handgrip Extension Cable
2 pièce (s) en stock
Wooden Camera - Easy Stick
5 pièce (s) en stock
D-Tap to Sony FS7, FS5, Panasonic EVA1
6 pièce (s) en stock
D-Box Panel (2pin LEMO)
1 pièce (s) en stock
Wooden Camera - UMB-1 Mattebox Clamp On Ring (143-136mm)
1 pièce (s) en stock
Wooden Camera - LCD Sun Shade (4 to 5 Inch)
3 pièce (s) en stock
Director's Monitor Cage v2 Rubber Grip Set of Two (3/8-16 Thread)
10 pièce (s) en stock
WC Super Clamp
18 pièce (s) en stock
Ultra Arm Ball (Male Hot Shoe)
6 pièce (s) en stock
Universal 15mm Rod Clamp (1/4-20)
7 pièce (s) en stock
Microphone Shock Mount
5 pièce (s) en stock
Zip Box Adapter Rings (49, 52, 55, 58, 62, 67, 72, 77mm)
1 pièce (s) en stock
Multi-tool (Metric, Imperial, Screwdriver) (3/16 inch, 2.5mm, 3mm, 4mm, T10, T20, #1 Phillips, Flat Head)
25 pièce (s) en stock
Wooden Camera - WC Coiled Right Angle Micro HDMI to Full HDMI (20")
2 pièce (s) en stock
Wooden Camera - 1/4-20 Hot Shoe
11 pièce (s) en stock
Wooden Camera - WC Coiled Right Angle Micro HDMI to Micro HDMI (12")
2 pièce (s) en stock
Wooden Camera - Pocket Lock (Power)
1 pièce (s) en stock
Wooden Camera - Bag Of Screws
26 pièce (s) en stock
Wooden Camera - Wrench Set (Star)
9 pièce (s) en stock
Wooden Camera - Wrench Set (Metric)
8 pièce (s) en stock
Wooden Camera - Wrench Set (Standard)
8 pièce (s) en stock
8-in-1 Universal Snap Ring Pliers Set
4 pièce (s) en stock
Wooden Camera - Offset Flat Head Screwdriver
9 pièce (s) en stock
The Elite Cage System includes a front cage, a rear cage, six dual NATO carriage clamps, three accessory 18" NATO rails, a cage extension, and three flags.
Délai habituel entre 8 et 12 semaines
The system includes a front cage, a rear cage, six dual NATO carriage clamps, and three accessory 18" NATO rails.
Délai habituel entre 8 et 12 semaines
he system includes an Arca-type baseplate system, a side rail system with left and right side plates, a modular top plate system with front, center, and rear plates, and a front and rear mounting kit for your CCH-5 top handle. The top plate system also includes two rod clamps and an antenna guard color kit.
Délai habituel entre 8 et 12 semaines
The system allows you to mount flags around the top and sides on the front of the Fujinon Duvo HZK 25-1000mm box lens to provide protection from glare and flaring into the lens.
Délai habituel entre 8 et 12 semaines
The Elite Accessory System from Wooden Camera gives you a complete accessory mounting, rig configuring solution for your Sony VENICE or VENICE 2 cinema camera.
Délai habituel entre 8 et 12 semaines
The modular system includes an Arca-type baseplate with an Arca-type riser system, a top plate system with two left/right plates and a center plate, an Ultra Handle 5" standard kit, a bolt-on EVF adapter for the Ultra Handle, a NATO side rail, an 8" safety dovetail plate, two 12" long 15mm rods, and a pro Gold mount battery slide.
Délai habituel entre 8 et 12 semaines
The modular system includes an Arca-type baseplate with an Arca-type riser system, a top plate system with two left/right plates and a center plate, an Ultra Handle 5" standard kit, a bolt-on EVF adapter for the Ultra Handle, a NATO side rail, an 8" safety dovetail plate, two 12" long 15mm rods, and a pro V-mount battery slide.
Délai habituel entre 8 et 12 semaines
Add a complete cage system to your Sony BURANO that includes numerous mounting points, handheld support, and EVF relocation with this Elite Accessory System from Wooden Camera.
Délai habituel entre 8 et 12 semaines
RED DSMC2 Accessory Kit (Pro, 19mm).
Délai habituel entre 8 et 12 semaines
RED DSMC2 Accessory Kit (Pro, 15mm Studio).
Délai habituel entre 8 et 12 semaines
Canon C300mkIII / C500mkII Unified Accessory Kit (Pro)
Délai habituel entre 8 et 12 semaines
The system includes the Upright Ultra Handle, which is the core of the top handle system and includes one 1" Extension module, one 4" Extension module, two 3" Extension modules, one right-angle Extension module, a 1/4"-20 Support Bracket, a Support Bracket for the KOMODO-X with the RMI extension, and a Color Ring Pack of 24 color rings to insert between...
Délai habituel entre 8 et 12 semaines
UFF-1 Universal Follow Focus (Pro)
Délai habituel entre 8 et 12 semaines
D-Box (Sony Venice, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Sony Venice camera
Délai habituel entre 8 et 12 semaines
D-Box (Sony Venice , Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Sony Venice camera
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Pro)
Délai habituel entre 8 et 12 semaines
Add a complete mounting and accessory kit to your Canon EOS C80 with this Elite Accessory System from Wooden Camera. The system includes an Arca-type baseplate, an Arca-type riser plate, a top plate, a NATO side rail, an Ultra Handle with 4 and 1" extensions, an 8" safety dovetail, two 12" 15mm rods, and a V-mount battery slide pro.
Délai habituel entre 8 et 12 semaines
Add a complete mounting and accessory kit to your Canon EOS C80 with this Elite Accessory System from Wooden Camera. The system includes an Arca-type baseplate, an Arca-type riser plate, a top plate, a NATO side rail, an Ultra Handle with 4 and 1" extensions, an 8" safety dovetail, two 12" 15mm rods, and a Gold mount battery slide pro.
Délai habituel entre 8 et 12 semaines
Centered around the FX9 Unified Baseplate, this kit can function in handheld shoots and on stationary rigs.
Délai habituel entre 8 et 12 semaines
Wooden Camera 264600 - RED DSMC2 Accessory Kit (Advanced).
Délai habituel entre 8 et 12 semaines
This V-mount battery version of the FUJIFILM X-H2S Unified Accessory Pro Kit from Wooden Camera is the ultimate bundle to build a rig for your FUJIFILM X-H2S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, a 12" safety dovetail,...
Délai habituel entre 8 et 12 semaines
This Gold mount battery version of the FUJIFILM X-H2S Unified Accessory Pro Kit from Wooden Camera is the ultimate bundle to build a rig for your FUJIFILM X-H2S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, a 12" safety...
Délai habituel entre 8 et 12 semaines
This Gold mount battery version of the FUJIFILM GFX 100S Unified Accessory Pro Kit from Wooden Camera is the ultimate bundle to build a rig for your FUJIFILM GFX 100S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, a 12" safety...
Délai habituel entre 8 et 12 semaines
This V-mount battery version of the FUJIFILM GFX 100S Unified Accessory Pro Kit from Wooden Camera is the ultimate bundle to build a rig for your FUJIFILM GFX 100S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, a 12" safety...
Délai habituel entre 8 et 12 semaines
Sony A7/A9 Unified Accessory Kit (Pro)
Délai habituel entre 8 et 12 semaines
Panasonic GH5 Unified Accessory Kit (Pro)
Délai habituel entre 8 et 12 semaines
Blackmagic Pocket Cinema Camera 6K Pro Unified Accessory Kit (Pro, Gold Mount) is a camera support package designed for the Blackmagic Pocket Cinema Camera 6K Pro camera.
Délai habituel entre 8 et 12 semaines
The Blackmagic Pocket Cinema Camera 6K Pro Unified Accessory Kit (Pro, V-Mount) is a camera support package designed for the Blackmagic Pocket Cinema Camera 6K Pro camera.
Délai habituel entre 8 et 12 semaines
Sony FX6 Unified Accesssory Kit (Pro, V-Mount)
Délai habituel entre 8 et 12 semaines
Sony FX6 Unified Accessory Kit (Pro, Gold Mount)
Délai habituel entre 8 et 12 semaines
The Panasonic BGH1 Accessory Kit (Pro, V-Mount) is a professional camera support package designed for the Panasonic LUMIX BGH1 camera.
Délai habituel entre 8 et 12 semaines
The Panasonic BGH1 Accessory Kit (Pro, Gold Mount) is a professional camera support package designed for the Panasonic LUMIX BGH1 camera.
Délai habituel entre 8 et 12 semaines
ARRI LPL Mount v2 for Sony VENICE, VENICE 2 Cameras
Délai habituel entre 8 et 12 semaines
Add all the accessories you need to your Canon EOS C400 cinema camera with this Core Accessory System from Wooden Camera. The modular system includes an Arca-type baseplate with an Arca-type riser system, two versatile left/right top plates, a top handle cheese-style plate, a NATO side rail, and a pro Gold mount battery slide.
Délai habituel entre 8 et 12 semaines
Add all the accessories you need to your Canon EOS C400 cinema camera with this Core Accessory System from Wooden Camera. The modular system includes an Arca-type baseplate with an Arca-type riser system, two versatile left/right top plates, a top handle cheese-style plate, a NATO side rail, and a pro V-mount battery slide.
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Swing Away)
Délai habituel entre 8 et 12 semaines
ARRI Alexa LF 24V Sharkfin Battery Bracket (V-Mount).
Délai habituel entre 8 et 12 semaines
The Wooden Camera Accessory System outfits your Sony FX3 or FX30 camera with a comprehensive mounting system for handheld or tripod-mounted shooting. Included in the system bundle are a half camera cage, two cheese-style mounting plates, and a right-side handgrip that directly mounts on your camera and its XLR handle.
Délai habituel entre 8 et 12 semaines
The Wooden Camera Accessory System outfits your Sony FX3 or FX30 camera with a comprehensive mounting system for handheld or tripod-mounted shooting.
Délai habituel entre 8 et 12 semaines
Sony FX6 Unified Accessory Kit (Pro, V-Mount) is a professional camera support package designed for the Sony FX6 camera and utilizes the Wooden camera Unified Baseplate System.
Délai habituel entre 8 et 12 semaines
ARRI LPL Mount for RED DSMC2 Cameras.
Délai habituel entre 8 et 12 semaines
This ARRI LPL to PL Mount Adapter from Wooden Camera enables an ARRI LPL-mount lens to be used with the RED V-RAPTOR XL camera PL mount. The included shim set enables you to adjust the flange focal distance between your camera and lens, helping to ensure accurate focus.
Délai habituel entre 8 et 12 semaines
RED Komodo Accessory Kit (Pro, V-Mount)
Délai habituel entre 8 et 12 semaines
RED Komodo Accessory Kit (Pro, Gold Mount)
Délai habituel entre 8 et 12 semaines
Centered around the FX9 Unified Baseplate, this kit can function in both handheld shoots and on stationary rigs.
Délai habituel entre 8 et 12 semaines
Canon C300mkIII / C500mkII Unified Accessory Kit (Advanced)
Délai habituel entre 8 et 12 semaines
Blackmagic URSA Mini, URSA Mini Pro / 12K Unified Accessory Kit (Advanced)
Délai habituel entre 8 et 12 semaines
The cage wraps around the rear of the lens and provides multiple 1/4"-20 and 3/8"-16 anti-twist threads to mount a variety of accessories.
Délai habituel entre 8 et 12 semaines
The cage wraps around the front of the lens and provides multiple 1/4"-20 and 3/8"-16 anti-twist threads to mount a variety of accessories.
Délai habituel entre 8 et 12 semaines
Add power accessory options to your build by adding the D-Box and B-Box System to your Sony BURANO. The D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery.
Délai habituel entre 8 et 12 semaines
The bundle includes the D-Box power distribution unit with a Gold mount battery plate and the B-Box power extension unit. A remote cable and a link cable are included with the B-Box.
Délai habituel entre 8 et 12 semaines
D-Box (Weapon/Scarlet-W/Raven, V-Mount)
Délai habituel entre 8 et 12 semaines
D-Box (Weapon/Scarlet-W/Raven, Gold Mount)
Délai habituel entre 8 et 12 semaines
UFF-1 Universal Follow Focus (Base)
Délai habituel entre 8 et 12 semaines
The D-Box and B-Box System from Wooden Camera includes the D-Box with a Gold mount plate and the B-Box external control box.
Délai habituel entre 8 et 12 semaines
The D-Box and B-Box System from Wooden Camera includes the D-Box with a V-mount plate and the B-Box external control box.
Délai habituel entre 8 et 12 semaines
Wooden Camera - D-Box (Alexa Mini / Mini LF, Gold Mount)
Délai habituel entre 8 et 12 semaines
Wooden Camera - D-Box (Alexa Mini / Mini LF, V-Mount)
Délai habituel entre 8 et 12 semaines
The kit includes a formfitting cage, a mini top handle, a 15mm LWS baseplate, an 8" safety dovetail, and two 15mm rods that measure 9" in length.
Délai habituel entre 8 et 12 semaines
The FUJIFILM X-H2S Unified Accessory Advanced Kit from Wooden Camera is an upgraded bundle to build a rig for your FUJIFILM X-H2S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, an 8" safety dovetail, and two 9" 15mm rods.
Délai habituel entre 8 et 12 semaines
The FUJIFILM GFX 100S Unified Accessory Advanced Kit from Wooden Camera is an upgraded bundle to build a rig for your FUJIFILM X-H2S camera. The main piece of this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. The kit is expanded with the LW 15mm baseplate with ARRI dovetail, an 8" safety dovetail, and two 9" 15mm rods.
Délai habituel entre 8 et 12 semaines
26V Gold Mount Plus (Alexa LF, 65, SXT)
Délai habituel entre 8 et 12 semaines
RED DSMC2 Accessory Kit (Base).
Délai habituel entre 8 et 12 semaines
Canon C300mkIII / C500mkII Unified Accessory Kit (Base)
Délai habituel entre 8 et 12 semaines
Centered around the FX9 Unified Baseplate, this kit can function in handheld shoots and on stationary rigs.
Délai habituel entre 8 et 12 semaines
Blackmagic URSA Mini, URSA Mini Pro / 12K Unified Accessory Kit (Base)
Délai habituel entre 8 et 12 semaines
The Panasonic BGH1 Accessory Kit (Advanced) is a professional camera support package designed for the Panasonic LUMIX BGH1 camera.
Délai habituel entre 8 et 12 semaines
The Blackmagic Pocket Cinema Camera 6K Pro Unified Accessory Kit (Advanced) is a camera support package designed for the Blackmagic Pocket Cinema Camera 6K Pro camera.
Délai habituel entre 8 et 12 semaines
RED Komodo Accessory Kit (Advanced)
Délai habituel entre 8 et 12 semaines
D-Box (URSA Mini, URSA Mini Pro / 12K, Gold Mount)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Base)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (Clamp On Complete Kit 80, 87, 95, 100, 104, 110, 114mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle Kit (Brown Leather)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle Kit (Rubber)
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 (Pro, Rubber)
Délai habituel entre 8 et 12 semaines
This Ultra Handle System from Wooden Camera combines modular components to create a custom-configurable handle for your Sony VENICE series camera rig. Included in the complete system are two 5" extensions, one 3" extension, one 1" extension, a front connector, a rear connector, and a pack of multicolored rings.
Délai habituel entre 8 et 12 semaines
This Ultra Handle System from Wooden Camera combines modular components to create a custom-configurable handle for your camera rig. Included in the complete system are two 5" extensions, one 3" extension, one 1" extension, a front connector, a rear connector, and a pack of multicolored rings.
Délai habituel entre 8 et 12 semaines
D-Box (URSA Mini, URSA Mini Pro / 12K, V-Mount)
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 (Pro, Brown Leather)
Délai habituel entre 8 et 12 semaines
Sony FX6 Unified Accessory Kit (Advanced)
Délai habituel entre 8 et 12 semaines
PL Mount (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Panasonic GH5 Unified Accessory Kit (Advanced)
Délai habituel entre 8 et 12 semaines
Canon C300mkII Unified Accessory Kit (Base)
Délai habituel entre 8 et 12 semaines
The Elite Accessory System from Wooden Camera gives you a complete accessory mounting, rig configuring solution for your Sony VENICE Rialto or Rialto 2 cinema camera. Included in the system bundle are a quick release top plate and arca-type baseplate for efficient transition from handheld to mounted shooting.
Délai habituel entre 8 et 12 semaines
The kit includes a formfitting cage, a mini top handle, a 15mm LWS baseplate, and two 15mm rods that measure 9" in length.
Délai habituel entre 8 et 12 semaines
The FUJIFILM GFX 100S Unified Accessory Base Kit from Wooden Camera is an all-around bundle to build a customizable rig for your FUJIFILM GFX 100S camera. Included in this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. An LW 15mm baseplate with ARRI dovetail allows you to secure the rig to the two 9" 15mm rods.
Délai habituel entre 8 et 12 semaines
The FUJIFILM X-H2S Unified Accessory Base Kit from Wooden Camera is an all-around bundle to build a customizable rig for your FUJIFILM X-H2S camera. Included in this kit is a full custom-fit camera cage with various 1/4"-20 and 3/8"-16 threads. An LW 15mm baseplate with ARRI dovetail allows you to secure the rig to the two 9" 15mm rods.
Délai habituel entre 8 et 12 semaines
The D-Box from Wooden Camera is an adapter that provides power distribution, remote power on/off, and hot swap battery functions for the Sony Burano cinema camera.
Délai habituel entre 8 et 12 semaines
Add a full modular top handle system to your RED KOMODO-X cinema camera with this Ultra Handle System from Wooden Camera.
Délai habituel entre 8 et 12 semaines
The D-Box from Wooden Camera is an adapter that provides power distribution, remote power on/off, and hot swap battery functions for the Sony Burano cinema camera.
Délai habituel entre 8 et 12 semaines
Add rig mounting and top accessories to your Sony BURANO camera with this Core Accessory System from Wooden Camera. The system includes a 15mm Arca-type baseplate, an Arca-type baseplate riser, a top plate, and a 5" ultra handle top handle.
Délai habituel entre 8 et 12 semaines
The system includes an Arca Baseplate with 15mm support, an Arca Riser to keep the rig at the proper lens height, a Top Cheese Plate to add accessories and optional rig components, and the 3" Ultra Handle attachment with a 3/8"-16 mount to get your modular top handle system started.
Délai habituel entre 8 et 12 semaines
The D-Box from Wooden Camera is an adapter that provides power distribution, remote power on/off, and hot swap battery functions for the RED KOMODO-X cameras.
Délai habituel entre 8 et 12 semaines
The unit mounts onto the V-mount of your camera and connects to the camera via the included 9-pin EXT cable, and it provides a plate for a separately available Gold mount battery.
Délai habituel entre 8 et 12 semaines
The BMPCC 6K Pro accessory package features our Blackmagic Pocket Cinema Camera 6K Pro Camera Cage - a form-fitting camera cage for secure camera accessory attachment, the compact Top Handle (3/8-16), and our LW 15mm Baseplate for BMPCC6K Pro - a quick release baseplate that holds two 15mm rods at the correct lens height.
Délai habituel entre 8 et 12 semaines
Quickly switch your Canon EOS C80 mount between a tripod and shoulder rig and add accessories with this Core Accessory System from Wooden Camera. The system includes an Arca-type baseplate, an Arca-type riser plate, a top plate, and a ridge plate.
Délai habituel entre 8 et 12 semaines
The NATO Matte Flag from Wooden Camera will mount onto the Cage Extension for the Fujinon Duvo HZK 25-1000mm box lens using a NATO clamp to provide protection from glare and flaring into the lens.
Délai habituel entre 8 et 12 semaines
RED Komodo Accessory Kit (Base)
Délai habituel entre 8 et 12 semaines
Sony FX6 Unified Accessory Kit (Base)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 2060/2575/120EX Dovetail (24 inches)
Délai habituel entre 8 et 12 semaines
The system includes a variety of durable aluminum plates that provide different size plates, 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Délai habituel entre 8 et 12 semaines
Customize the top plate of your Sony VENICE or VENICE 2 camera in a configuration that best suits your mounting needs with this Quick Release Top Plate System from Wooden Camera. The main component of the system is the top plate which slides onto the camera's preexisting top dovetail mount.
Délai habituel entre 8 et 12 semaines
C-Box (Converter, Gold Mount)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Cable-less Gold Mount (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Cable-less V-Mount (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Dual Director's Monitor Cage v3
Délai habituel entre 8 et 12 semaines
Quickly mount your camera onto a wide range of mounts using this Baseplate System from Wooden Camera. The system comprises an Arca-type baseplate and an Arca-type riser plate that can be used together or individually
Délai habituel entre 8 et 12 semaines
Panasonic Leica L Mount to ARRI LPL Mount Adapter
Délai habituel entre 8 et 12 semaines
Easy Top (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Canon R Mount to ARRI LPL Mount Adapter
Délai habituel entre 8 et 12 semaines
Gold Mount Plus Cradle for Preston MDR3 (26v)
Délai habituel entre 8 et 12 semaines
The Canon C300mkII PL Modification Kit allows users to convert their Canon C300mkII camera to PL Mount through a short modification process
Délai habituel entre 8 et 12 semaines
Fujifilm G Mount (GFX) to ARRI LPL Mount Adapter
Délai habituel entre 8 et 12 semaines
Sony E-Mount to LPL Mount Adapter
Délai habituel entre 8 et 12 semaines
The accessory plate system includes a variety of durable aluminum plates that provide different size plates, 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Délai habituel entre 8 et 12 semaines
Canon RF to PL Mount Pro (RED Komodo)
Délai habituel entre 8 et 12 semaines
E-Mount to PL Mount Pro (1/4-20 Support Foot)
Délai habituel entre 8 et 12 semaines
Fujifilm X Mount to PL Mount Adapter is a shimmable version of our ARRI PL lens mount adapter that enables mounting of ARRI PL mount lenses onto the Fujifilm X mount cameras.
Délai habituel entre 8 et 12 semaines
An integrated DSLR foot with a 1/4"-20 thread allows you to attach the adapter to a tripod to reduce strain on your camera. The foot can also attach to the front of a Wooden Camera cage with two included screws.
Délai habituel entre 8 et 12 semaines
D-Box for Sony Rialto Power Strip provides 2x two-pin LEMOs at 12V, two three-pin Fischers at 24V with R/S, and one D-Tap at 12V. Five self-securing closure cable ties attach the included Y cable to the Rialto Head cable, and a new offset bracket allows you to seamlessly mount this indispensable distro module on the Rialto 2's new extruded form factor....
Délai habituel entre 8 et 12 semaines
Wooden Camera - 2060/2575/120EX Dovetail (18 inches)
Délai habituel entre 8 et 12 semaines
AIR EVF Mount (RED DSMC2 EVF)
Délai habituel entre 8 et 12 semaines
PL Mount Modification Kit (Blackmagic Pocket Cinema Camera 6K)
Délai habituel entre 8 et 12 semaines
The system includes a variety of durable aluminum plates that provide 1/4"-20 and 3/8"-16 threads, 15mm rod mounts, mini rails, and mini rail clamps.
Délai habituel entre 8 et 12 semaines
The system is made up of an EVF plate, a universal EVF swivel arm, a universal accessory rail swivel clamp, a bolt-on rail clamp, and a universal 15mm rod clamp.
Délai habituel entre 8 et 12 semaines
Mount this D-Box Power Strip with Y-Shaped Cable on your Sony VENICE Rialto 2 camera for expanded distribution of various power sources. Its offset bracket ensures seamless attachment of the power module and cable to your camera with its extruded form factor. Two 2-pin LEMO and one D-Tap port support 12V of power, while two 3-pin Fischer ports support 24V...
Délai habituel entre 8 et 12 semaines
E-Mount to PL Mount Pro (Sony FX6)
Délai habituel entre 8 et 12 semaines
This Wooden Camera Arca-Type Baseplate System matches your Sony VENICE or VENICE 2 camera height to that of ARRI-standard bridge plates for increased compatibility. The system includes an Arca-type riser and baseplate with lens-centered rod clamps and safety rails. Its design ensures your camera maintains a low profile and is optically centered.
Délai habituel entre 8 et 12 semaines
This system includes an Arca-type baseplate and an Arca-type riser/receiver that matches your ALEXA 35 camera height to that of ARRI-standard bridge plates for increased compatibility. The riser and baseplate system features lens-centered rod clamps and safety rails to ensure your camera maintains a low profile and is optically centered.
Délai habituel entre 8 et 12 semaines
The Top Plate System includes the modular top plate assembly that includes front, middle, and rear plates, as well as front and upper dual 15mm rod clamps and a set of five color antenna guards.
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (Swing Away)
Délai habituel entre 8 et 12 semaines
OConnor Easy Load ARRI Dovetail (2575, 2065, 120EX, 12")
Délai habituel entre 8 et 12 semaines
E-Mount to PL Mount Pro (Sony FS5, FS5mkII)
Délai habituel entre 8 et 12 semaines
Canon EOS R to PL Mount Adapter (Pro)
Délai habituel entre 8 et 12 semaines
Fujifilm X Mount to PL Mount Adapter
Délai habituel entre 8 et 12 semaines
Nikon Z Mount to PL Mount Adapter
Délai habituel entre 8 et 12 semaines
L-Mount to PL Mount Pro (Panasonic and Leica)
Délai habituel entre 8 et 12 semaines
MFT to PL Mount Pro (1/4-20 Support Foot)
Délai habituel entre 8 et 12 semaines
The Flag Cage Extension from Wooden Camera allows you to mount separately available flags onto the Fujinon Duvo HZK 25-1000mm box lens to protect from glare and flaring into the lens.
Délai habituel entre 8 et 12 semaines
Zip Focus (15mm LW Follow Focus)
Délai habituel entre 8 et 12 semaines
Zip Focus (19mm/15mm Studio Follow Focus)
Délai habituel entre 8 et 12 semaines
LW 15mm Baseplate (RED Komodo)
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 (Base) Brown Leather
Délai habituel entre 8 et 12 semaines
Quick Release Bridgeplate (19mm)
Délai habituel entre 8 et 12 semaines
Quick Release Bridgeplate (15mm Studio)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Universal Baseplate
Délai habituel entre 8 et 12 semaines
Quickly switch your Canon EOS C80 mount between a tripod and shoulder rig with this Baseplate System from Wooden Camera. The system includes an Arca-type baseplate and an Arca-type riser plate.
Délai habituel entre 8 et 12 semaines
Unified Baseplate (Sony Venice, Rialto, F55, F5, URSA Mini)
Délai habituel entre 8 et 12 semaines
LW 15mm Baseplate (Canon C70)
Délai habituel entre 8 et 12 semaines
Unified Baseplate (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35)
Délai habituel entre 8 et 12 semaines
Unified Bridgeplate (19mm)
Délai habituel entre 8 et 12 semaines
Unified Bridgeplate (15mm Studio)
Délai habituel entre 8 et 12 semaines
Unified Baseplate (Canon C300mkIII, C500mkII, C200, C200B, C700)
Délai habituel entre 8 et 12 semaines
Solid Baseplate (Sony Venice, F55, F5) is a fixed baseplate that provides pass-through lightweight 15mm rod support at the correct lens height along with ARRI standard rosettes on each side
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 (Base, Rubber)
Délai habituel entre 8 et 12 semaines
D-Box Sony Venice Replacement Power Strip Only.
Délai habituel entre 8 et 12 semaines
D-Box Sony Rialto Power Strip with Y Cable (220", 559 cm)
Délai habituel entre 8 et 12 semaines
D-Box Sony Rialto Power Strip mit Y-Kabel
Délai habituel entre 8 et 12 semaines
Unified VCT Wedge Plate
Délai habituel entre 8 et 12 semaines
AIR EVF Extension Arm (Sony Venice, DVF-EL200 EVF) is an ultra-lightweight extension for the AIR EVF Mount (Sony Venice, DVF-EL200 EVF) and also the Sony viewfinder mount that is included with the EVF
Délai habituel entre 8 et 12 semaines
Add a versatile Top Plate System from Wooden Camera to your Sony BURANO cinema camera. The system is made up of a cheese-style top plate, a front dual 15mm LWS rod clamp, and a 15mm LWS upper rod clamp.
Délai habituel entre 8 et 12 semaines
This Ultra Handle Standard Kit from Wooden Camera combines modular components to create a custom-configurable handle for your Sony VENICE series camera rig. Included in the standard kit is one 5" extension, one 1" extension, a front connector, and a rear connector. Various mounting threads and 3/8"-16 screws secure each part to one another along with the...
Délai habituel entre 8 et 12 semaines
This Ultra Handle Standard Kit from Wooden Camera combines modular components to create a custom-configurable handle for your camera rig. Included in the standard kit are one 5" and one 1" extension, a front connector, and a rear connector.
Délai habituel entre 8 et 12 semaines
Add a modular plate system to the top of your Canon EOS C400 cinema camera with this Top Plate System from Wooden Camera. The system includes a center top plate, two symmetrical left/right top plates, and a top plate-mounting front dual rod clamp.
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
B-Box (RED Komodo)
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (Canon C100, C100mkII, C300, C500).
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (RED Komodo)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Canon C70)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Canon C70)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro V-Mount (Sony FX6)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Sony FX6)
Délai habituel entre 8 et 12 semaines
Battery Slide Pro Gold Mount (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Mount your Sony BURANO cinema camera onto a sturdy but lightweight Baseplate System from Wooden Camera. The low-profile system is made up of a 15mm LWS Arca-type baseplate and an Arca-type riser plate.
Délai habituel entre 8 et 12 semaines
Cradle for Bolt LT TX allows you to mount the Teradek transmitter in-line with Gold or V-Mount camera-back power.
Délai habituel entre 8 et 12 semaines
Gold Mount Plus Cradle for Bolt 6 LT TX (26v)
Délai habituel entre 8 et 12 semaines
Use this V-mount Dual Battery Plate Cradle from Wooden Camera to power and store your Teradek Bolt LT transmitter between your camera and battery.
Délai habituel entre 8 et 12 semaines
Gold Mount Plus Sharkfin (26v)
Délai habituel entre 8 et 12 semaines
The cradle is dual-sided with a V-mount receiver to attach a battery and a Gold mount battery to secure to your camera, while transmitting SDI video simultaneously.
Délai habituel entre 8 et 12 semaines
Extend the power and run/stop capabilities of your Sony BURANO with the B-Box System from Wooden Camera. The system includes the core B-Box, a bolt-on side mount, a link cable, and a remote cable.
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Bellows Set)
Délai habituel entre 8 et 12 semaines
Eyepiece Leveler Bracket Base for OConnor Pan and Tilt Heads
Délai habituel entre 8 et 12 semaines
The Battery Slide Pro Gold Mount for Sony FX9 from Wooden Camera attaches to the rear of the camera and supports a Gold mount battery while leaving access to the camera's standard battery compartment.
Délai habituel entre 8 et 12 semaines
This Wooden Camera Arca-Type Baseplate System matches your Sony VENCIE Rialto or Rialto 2 camera height to that of the VENICE 2 to use VENICE 2 compatible accessories.
Délai habituel entre 8 et 12 semaines
Add this Ultra Handle 4" Kit from Wooden Camera to your RED DSMC3 cinema camera, such as the KOMODO, KOMODO-X, or V-RAPTOR, to add handheld support, trigger control, and additional accessories.
Délai habituel entre 8 et 12 semaines
UVF Mount (LCD, No Clamp)
Délai habituel entre 8 et 12 semaines
This Faceplate Cage System from Wooden Camera provides you with both a front plate cage and a dual 15mm rod clamp for your Sony VENICE series camera. Multiple mounting points on the main cage allow for easy integration of cine lens motors and accessories. Lens-centered mounting points for the dual 15mm rod clamp make integrating follow focus motors and...
Délai habituel entre 8 et 12 semaines
Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, V-Mount) utilizes an Anton/Bauer micro battery plate which provides an unregulated 14 Volts to a 2-Pin connector for camera power.
Délai habituel entre 8 et 12 semaines
Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 6K Pro, Gold Mount) utilizes an Anton/Bauer micro battery plate which provides unregulated 14v to a 2-Pin connector for camera power. T
Délai habituel entre 8 et 12 semaines
Add a high-capacity battery plate to power your Panasonic BGH1 rig with this compact Micro Battery Slide from Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
The plate supports one V-mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
Power your camera and accessories with a V-mount battery using this Micro Battery Slide Plate with Dual 15mm Dual Rod Clamp from Wooden Camera. The battery plate itself can slide up and down and be tightened in place using the attached lever for optimal placing on your rig. Two D-tap ports take power from your attached V-mount battery and deliver it to...
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (95mm Clamp On)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (87mm Clamp On)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (80mm Clamp On)
Délai habituel entre 8 et 12 semaines
Zip Box Double 4x5.65 Kit (80-85mm, 90-95mm, 100-105mm, 110-115mm, Adapter Rings)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 2060/2575/120EX Dovetail (12 inches)
Délai habituel entre 8 et 12 semaines
The battery plate itself can slide up and down and be tightened in place using the attached lever for optimal placing on your rig.
Délai habituel entre 8 et 12 semaines
Adapt your RED V-RAPTOR camera for use with full-sized V-mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 3.8A E-fuse that can be easily reset.
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (104mm Clamp On)
Délai habituel entre 8 et 12 semaines
Adapt your RED V-RAPTOR camera for use with Gold mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 3.8A E-fuse that can be easily reset.
Délai habituel entre 8 et 12 semaines
Convert your Gold mount camera or other pro video component to use V-mount batteries with this Micro Battery Plate Adapter from Wooden Camera. Constructed from lightweight yet durable aluminum, this compact adapter features two D-Tap ports for powering accessories and a 5.8A E-fuse
Délai habituel entre 8 et 12 semaines
Micro Battery Plate Adapter V-Mount to Gold Mount converts a V-Mount system to accept a Gold Mount battery. It is made from anodized aluminum which ensures both durability and secure battery mounting
Délai habituel entre 8 et 12 semaines
A V-mount micro battery plate provides unregulated 12V of power to your camera via a LEMO 3-pin connector. Two D-tap ports output 5.8A of power to compatible accessories like secondary monitors or fill lights.
Délai habituel entre 8 et 12 semaines
A Gold mount micro battery plate provides unregulated 12V of power to your camera via a LEMO 3-pin connector. Two D-tap ports output 5.8A of power to compatible accessories like secondary monitors or fill lights.
Délai habituel entre 8 et 12 semaines
The plate supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable.
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (100mm Clamp On)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (110mm Clamp On)
Délai habituel entre 8 et 12 semaines
Quickly swap your Canon C80 or C400 cinema camera between rigs with this Arca-Type Baseplate from Wooden Camera. The baseplate features an Arca-type dovetail designed to work with the Wooden Camera Baseplate System for the Canon C400.
Délai habituel entre 8 et 12 semaines
Outfit your Panasonic GH6 camera with this Full Camera Cage from Wooden Camera to protect the camera body while expanding its mounting capabilities.
Délai habituel entre 8 et 12 semaines
This two-piece cage mounts directly onto the rear of the KOMODO-X and provides multiple 3/8"-16 and 1/4"-20 anti-twist threads to add a variety of accessories.
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (4pin XLR Right Angle).
Délai habituel entre 8 et 12 semaines
Outfit your FUJIFILM X-H2S camera with this Full Camera Cage from Wooden Camera to protect the camera body while expanding its mounting capabilities. Its wraparound custom-fit design offers increased stability to your X-H2S without blocking ports and controls, as well as multiple 1/4"-20 and 3/8"-16 threads with ARRI-standard locating pins.
Délai habituel entre 8 et 12 semaines
Recorder Slide
Délai habituel entre 8 et 12 semaines
Wooden Camera - MFT to PL Adapter (Pocket)
Délai habituel entre 8 et 12 semaines
The baseplate is compatible with standard-height ARRI bridge plates, allowing you to use the camera with a shoulder support or tripod system, or to add 15mm LWS rod support for accessories like a follow focus, a matte box, or a lens motor. It is designed to put the ALEXA 35 camera at the proper lens height when mounted onto optional 15mm rods.
Délai habituel entre 8 et 12 semaines
Outfit your FUJIFILM GFX 100S camera with this Full Camera Cage from Wooden Camera to protect the camera body while expanding its mounting capabilities
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (114mm Clamp On)
Délai habituel entre 8 et 12 semaines
The baseplate maintains a low center of gravity thanks to its low-profile design.
Délai habituel entre 8 et 12 semaines
Complete Top Mount Kit (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Micro Touch and Go System (Sachtler FSB 10T, 8T, FSB 6T, Touch and Go Plate S)
Délai habituel entre 8 et 12 semaines
Mini Touch and Go System
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Large) with Rubber Grip
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Large)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (85mm Clamp On)
Délai habituel entre 8 et 12 semaines
Micro V-Mount Battery Slide (Panasonic BGH1)
Délai habituel entre 8 et 12 semaines
Touch and Go System (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
Délai habituel entre 8 et 12 semaines
WC Pro V-Mount (4pin XLR Right Angle).
Délai habituel entre 8 et 12 semaines
PL Mount (RED DSMC1, DSMC2)
Délai habituel entre 8 et 12 semaines
The B-Box Kit from Wooden Camera is an EXT port breakout box for RED DSMC3 cinema cameras such as the KOMODO, KOMODO-X, and V-RAPTOR. This adapter mounts onto the camera or separately available D-Box and features a 9-pin extension port
Délai habituel entre 8 et 12 semaines
Simple Canon Mount (RED DSMC1, DSMC2)
Délai habituel entre 8 et 12 semaines
Tilt and Swing Arm for UMB-1 Universal Mattebox
Délai habituel entre 8 et 12 semaines
Wooden Camera - AIR EVF Mount (ARRI Alexa Mini MVF-1 / Mini LF MVF-2, Friction Knuckle and 19mm Rod Only)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Safety Dovetail (18")
Délai habituel entre 8 et 12 semaines
Master Top Handle (ARRI Alexa XT, SXT, SXT-W, Classic) (Main Handle Section Only)
Délai habituel entre 8 et 12 semaines
The power strip provides two 12V 2-pin LEMO-type connectors, two 24V 3-pin Fischer connectors, and a D-Tap port.
Délai habituel entre 8 et 12 semaines
The baseplate features an Arca-type dovetail designed to work with the Wooden Camera Baseplate System for the Sony BURANO.
Délai habituel entre 8 et 12 semaines
This Ultra Handle Kit with 5" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your handheld camera rig.
Délai habituel entre 8 et 12 semaines
This Ultra Handle Kit with 5" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your Sony VENICE series camera rig. Included in the kit is one 5" extension, one 1" extension, and one front connector. Various mounting threads and 3/8"-16 screws secure each part to one another along with the included Allen key.
Délai habituel entre 8 et 12 semaines
Trigger Handle (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Unified Baseplate Core Unit (No Dovetails)
Délai habituel entre 8 et 12 semaines
Simplify using your camera with cine-style accessories with this Wooden Camera Lightweight 15mm Baseplate for the Panasonic LUMIX BGH1 camera.
Délai habituel entre 8 et 12 semaines
The cage wraps around three sides of the camera, leaving the handgrip exposed for accessibility.
Délai habituel entre 8 et 12 semaines
Unified BMPCC4K / BMPCC6K Camera Cage (Blackmagic Pocket Cinema Camera 4K / 6K) with Wood Grip
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Clamp On Set)
Délai habituel entre 8 et 12 semaines
Pass Through Top Plate (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Eyepiece Leveler Telescoping Arm
Délai habituel entre 8 et 12 semaines
Revolva Pass Through Top Plate (DSMC2)
Délai habituel entre 8 et 12 semaines
Integrate 15mm rod support systems at the correct lens height for your FUJIFILM GFX 100S or X-H2S camera using this LW 15mm Baseplate from Wooden Camera. The quick release baseplate has dual 15mm rod ports that have two locking thumbscrews to tighten or release the system.
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 Dovetail and Shoulder Pad Assembly
Délai habituel entre 8 et 12 semaines
This Arca-type baseplate mounts onto the included Bridge Plate Dovetail and features dual 15mm rod ports for mounting optional 15mm accessories.
Délai habituel entre 8 et 12 semaines
UVF Mount (Sony FX9, FS7, FS7mkII, Panasonic EVA1, No Clamp)
Délai habituel entre 8 et 12 semaines
Micro Touch and Go Receiver Only (Sachtler FSB 10T, 8T, FSB 6T, Touch and Go Plate S)
Délai habituel entre 8 et 12 semaines
Mini Touch and Go Receiver Only
Délai habituel entre 8 et 12 semaines
This Wooden Camera Quick Release Top Plate is designed to slide onto your Sony VENICE/VENICE 2's top dovetail mount for seamless, tool-free attachment to expand the mounting points on your rig.
Délai habituel entre 8 et 12 semaines
Touch and Go Receiver Only (120mm Oconnor Euro, Sacthler 35, Ronford Baker RBQ Compatible)
Délai habituel entre 8 et 12 semaines
WC Pro V-Mount Camera Side to Gold Mount Battery Side Adapter (3x D-Tap and Digital Fuse).
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount Camera Side to V-Mount Battery Side Adapter (3x D-Tap and Digital Fuse).
Délai habituel entre 8 et 12 semaines
WC Pro V-Mount (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (BMPCC4K / BMPCC6K, Blackmagic Pocket Cinema Camera 4K / 6K)
Délai habituel entre 8 et 12 semaines
The camera mounts into the cage with two bottom screws, and the cage protects your camera while maintaining access to controls and ports on all sides. Accessories can be mounted around the cage using the 1/4"-20 and 3/8"-16 threads as well as threads that feature ARRI-style anti-twist locating holes.
Délai habituel entre 8 et 12 semaines
This Faceplate Cage from Wooden Camera attaches to your select Sony VENICE Series camera with its existing mounting points to provide places to attach various accessories.
Délai habituel entre 8 et 12 semaines
The Fujifilm X-H1 Camera Cage is a quick release, height adjustable cage for the Fujifim's X-H1 DSLR
Délai habituel entre 8 et 12 semaines
This cage piece mounts directly onto the rear right side of the KOMODO-X and provides eight 3/8"-16 and five 1/4"-20 anti-twist threads to add a variety of accessories.
Délai habituel entre 8 et 12 semaines
This Ultra Handle Kit with 3" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your handheld camera rig.
Délai habituel entre 8 et 12 semaines
Add quick-release mounting functionality to your Sony VENICE Rialto or Rialto 2 camera using this Wooden Camera Arca-Type Baseplate. The baseplate maintains a low center of gravity thanks to its low-profile design
Délai habituel entre 8 et 12 semaines
This Ultra Handle Kit with 3" Extension from Wooden Camera combines modular components to create a custom-configurable handle for your Sony VENICE series camera rig. Included in the kit is one 3" extension, one 1" extension, and one front connector. Various mounting threads and 3/8"-16 screws secure each part to one another along with the included Allen key.
Délai habituel entre 8 et 12 semaines
The B-Box from Wooden Camera is a power breakout box extension for the D-Box for the Sony BURANO cinema camera. The B-Box plugs into the D-Box using a separately available 5-pin remote cable and draws power from the D-Box, and it provides two 12V 2-pin ports and a 24V 3-pin port.
Délai habituel entre 8 et 12 semaines
Top Handle Kit (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Medium) with Rubber Grip
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Medium) with Rubber Grip
Délai habituel entre 8 et 12 semaines
WC Gold Mount (RED DSMC1, DSMC2)
Délai habituel entre 8 et 12 semaines
UVF LCD Sled
Délai habituel entre 8 et 12 semaines
The two-piece plate attaches to the top of the camera using four included screws and provides 1/4"-20 3/8"-16 ARRI-style anti-twist accessory threads for extension arms and handles.
Délai habituel entre 8 et 12 semaines
Top Plate (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Top Plate (Sony Venice) is a top cheeseplate for the Sony Venice that contours to the shape of the camera body and leaves the USB port area open
Délai habituel entre 8 et 12 semaines
VX Skateboard Camera Mic
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Medium)
Délai habituel entre 8 et 12 semaines
LW 15mm Baseplate (Blackmagic Pocket Cinema Camera 6K Pro) is a quick release baseplate that provides lightweight 15mm rod support at the correct lens height.
Délai habituel entre 8 et 12 semaines
Top Plate (Sony FX9)
Délai habituel entre 8 et 12 semaines
Top Plate (Canon C70)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Swing Away Arm Only)
Délai habituel entre 8 et 12 semaines
Top Plate (URSA Mini, URSA Mini Pro / 12K)
Délai habituel entre 8 et 12 semaines
Unified VCT-14 Tripod Plate
Délai habituel entre 8 et 12 semaines
Vertical Camera Bracket
Délai habituel entre 8 et 12 semaines
Universal Lens Support (19mm/15mm Studio)
Délai habituel entre 8 et 12 semaines
Universal Lens Support (15mm LW)
Délai habituel entre 8 et 12 semaines
NATO Lock Ultra Arm (8")
Délai habituel entre 8 et 12 semaines
Director's Monitor Cage v3
Délai habituel entre 8 et 12 semaines
Mount accessories such as handles or extensions onto either side of your ARRI ALEXA 35 cinema camera with this Side Rail System from Wooden Camera.
Délai habituel entre 8 et 12 semaines
NATO Lock Ultra Arm (3")
Délai habituel entre 8 et 12 semaines
Battery Swing Bracket Only (for D-Box Plus)
Délai habituel entre 8 et 12 semaines
Preston Light Ranger 2 VOU Mounting Kit
Délai habituel entre 8 et 12 semaines
Wooden Camera - Safety Dovetail (12 inches)
Délai habituel entre 8 et 12 semaines
RED Male Pogo to Female Pogo LCD/EVF Cable (36", RED DSMC2)
Délai habituel entre 8 et 12 semaines
RED Male Pogo to Female Pogo LCD/EVF Cable (24", RED DSMC2)
Délai habituel entre 8 et 12 semaines
Wooden Camera - NATO Handle Kit (Leather, 70mm)
NATO Handle Kit (Plus, 70mm)
NATO Handle Kit (Plus, 100mm)
WC Gold Mount (XLR 4 Pin)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Dovetail Clamp
Délai habituel entre 8 et 12 semaines
WC V-Mount (XLR 4 Pin)
Délai habituel entre 8 et 12 semaines
WC Gold Mount (XLR-RA)
Délai habituel entre 8 et 12 semaines
WC V-Mount (XLR-RA)
Délai habituel entre 8 et 12 semaines
Pro Gold Mount Plus (26v)
Délai habituel entre 8 et 12 semaines
24V Power Supply (3pin XLR Female)
Délai habituel entre 8 et 12 semaines
Wooden Camera - 24V Power Supply (ARRI Amira / Alexa Mini / Mini LF)
Délai habituel entre 8 et 12 semaines
A-Box (Alexa Mini LF)
Délai habituel entre 8 et 12 semaines
A-Box (Sony Venice) adapts the single 5 pin XLR on the side of the Venice camera body, to two standard 3 pin XLRs (female)
Délai habituel entre 8 et 12 semaines
A-Box (RED DSMC2, KOMODO)
Délai habituel entre 8 et 12 semaines
This compact Universal Micro Battery Plate from Wooden Camera supports both micro and full-size Gold mount batteries.
Délai habituel entre 8 et 12 semaines
Wooden Camera - 15mm Platform
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 Replacement Dovetail
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Arm
Délai habituel entre 8 et 12 semaines
Wooden Camera - UVF v2 Sled
Délai habituel entre 8 et 12 semaines
This durable Arca-type plate features 17 each 1/4"-20 and 3/8"-16 threads that allow the fine balancing of your ALEXA 35 when mounted on a Steadicam or gimbal device.
Délai habituel entre 8 et 12 semaines
NATO Handle Plus V2 Kit (NATO ARRI 70mm Rail, 1.67" Screw Channel).
Délai habituel entre 8 et 12 semaines
Crossbar v3 (Pivoting ARRI Rosettes)
Délai habituel entre 8 et 12 semaines
Mount your professional production display weighing up to 45 lb onto a C-stand or other mount with a 5/8" Baby pin using this Ultra Quick Release Articulating Monitor Mount from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Wooden Camera - A-Box (Alexa Mini)
Délai habituel entre 8 et 12 semaines
This compact Universal Micro Battery Plate from Wooden Camera supports both micro and full-size V-mount batteries.
Délai habituel entre 8 et 12 semaines
This adapter kit includes the Front Rod Bracket and Rear Adapter Plate and mounts onto the separately available Wooden Camera Front Top Plate assembly for ALEXA 35.
Délai habituel entre 8 et 12 semaines
Add accessories such as a top handle, extension arms, a battery mount, a monitor, or an EVF mount to your Canon C80 camera with this Top Plate from Wooden Camera.
Délai habituel entre 8 et 12 semaines
RED Male LEMO Compatible to Female Pogo LCD/EVF Cable (36", RED DSMC2)
Délai habituel entre 8 et 12 semaines
RED Male Pogo to Male LEMO Compatible LCD/EVF Cable (36", RED DSMC2)
Délai habituel entre 8 et 12 semaines
The Shoulder Plate - ARCA was made to allow users to quickly swap from studio to handheld setups when using the ARCA Base Plate.
Délai habituel entre 8 et 12 semaines
RED Male LEMO Compatible to Female Pogo LCD/EVF Cable (24", RED DSMC2)
Délai habituel entre 8 et 12 semaines
RED Male Pogo to Male LEMO Compatible LCD/EVF Cable (24", RED DSMC2)
Délai habituel entre 8 et 12 semaines
The plate mounts onto the camera using the Wooden Camera Top Plate, Ultra Handle System, or Side Rails, and it provides four adjustable accessory rails to mount and adjust the position of the viewfinder.
Délai habituel entre 8 et 12 semaines
The clamp is part of the Wooden Camera EVF System and mounts onto an accessory rail or the EVF Swivel Arm NATO rail and allows you to slide and swivel the EVF when it's mounted onto an Accessory Rail with the EVF Plate.
Délai habituel entre 8 et 12 semaines
RED Male LEMO Compatible to Female Pogo LCD/EVF Cable (12", RED DSMC2)
Délai habituel entre 8 et 12 semaines
RED Male Pogo to Male LEMO Compatible LCD/EVF Cable (12", RED DSMC2)
Délai habituel entre 8 et 12 semaines
Create a handle that best suits your Sony VENICE series camera rig using this 5" Ultra Handle Extension from Wooden Camera thanks to its modular design.
Délai habituel entre 8 et 12 semaines
Wooden Camera - A-Box (Canon C70, RED ONE)
Délai habituel entre 8 et 12 semaines
Wooden Camera - A-Box (5pin XLR, ARRI Alexa, RED Ranger)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Battery Slide
Délai habituel entre 8 et 12 semaines
Unified DSLR 15mm Baseplate
Délai habituel entre 8 et 12 semaines
Monitor Hinge Kit (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Top Handle Only (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Incorporate additional accessories and mounting points into your Sony FX3 or FX30 setup using this Wooden Camera Half Cage. The half cage features an L-shaped design with an Arca-type mounting plate at the bottom for easy transitioning from tripod-mounted to handheld configurations. Two 3/8"-16 and two 1/4"-20 threads on the cage offer places to mount...
Délai habituel entre 8 et 12 semaines
Create a handle that best suits your Sony VENICE series camera rig using this Ultra Handle Right-Angle Extension from Wooden Camera thanks to its modular design.
Délai habituel entre 8 et 12 semaines
WC Pro Gold Mount (3x D-Tap)
Délai habituel entre 8 et 12 semaines
The Short Pass-Through Top Plate for RED DSMC2 from Wooden Camera attaches to the top of the camera and provides 1/4"-20 threaded holes with RED spacing.
Délai habituel entre 8 et 12 semaines
UVF Knuckle Assembly
Délai habituel entre 8 et 12 semaines
These durable aluminum plates feature 3/8"-16 and 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Délai habituel entre 8 et 12 semaines
1 to 3 Mini Power Splitter (2pin LEMO Compatible)
Délai habituel entre 8 et 12 semaines
UMB-1 Hard Matte Set
Délai habituel entre 8 et 12 semaines
Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 8")
Délai habituel entre 8 et 12 semaines
UVF Mount (Rod/NATO Rail)
Délai habituel entre 8 et 12 semaines
Top Plate (Canon C300mkII)
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip (Right) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip (Left) is an ergonomic wooden handgrip, carved from a solid piece of Sapele wood which is similar to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
Délai habituel entre 8 et 12 semaines
Wooden Camera Handgrip Trigger Box attaches to the Wooden Handgrip (Right) and (Left) to add start/stop functionality for LANC and ARRI 3 pin Fischer compatible cameras.
Délai habituel entre 8 et 12 semaines
Universal ARRI Rosette Rod Bracket (15mm LW/Studio, 19mm)
Délai habituel entre 8 et 12 semaines
Rosette Handle Pair (Rubber)
Délai habituel entre 8 et 12 semaines
Rosette Handle Pair (Brown Leather)
Délai habituel entre 8 et 12 semaines
Mini Vertical Camera Bracket
Délai habituel entre 8 et 12 semaines
3pin XLR to ARRI Alexa XT, SXT, SXT-W, Classic (120")
Délai habituel entre 8 et 12 semaines
1 to 3 Mini Power Splitter (4pin Hirose)
Délai habituel entre 8 et 12 semaines
1 to 3 Mini Power Splitter (3pin Fischer)
Délai habituel entre 8 et 12 semaines
The 15mm Dual Mount Bolt-On Accessory Rod Kit with 3/8"-16 threads from Wooden Camera includes 1.5, 3, and 5" 15mm bolt-on rods. Each rod sports two 3/8"-16 anti-twist mounts for positioning either on the face or side of your rig.
Délai habituel entre 8 et 12 semaines
Top Plate (Sony FX6)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Bracket
Délai habituel entre 8 et 12 semaines
The durable aluminum plates feature 3/8"-16 and two 1/4"-20 anti-twist accessory mounting threads for mounting accessories such as rods, extensions, or lens accessories.
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (Swing Away Back Only)
Délai habituel entre 8 et 12 semaines
Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5")
Délai habituel entre 8 et 12 semaines
Preston Micro Force to ARRI Rosette
Délai habituel entre 8 et 12 semaines
Wooden Camera - Safety Dovetail (8 inches)
Délai habituel entre 8 et 12 semaines
Alterna Cables - 4pin XLR to RED DSMC1, DSMC2 (Straight, 120")
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152400 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152500 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
The Wooden Camera WC-152600 Side Handle attaches to your camera or camera cage via two 1/4"-20 mounting screws, providing a secure grip to carry your camera by.
Délai habituel entre 8 et 12 semaines
Preston MDR3 / MDR4 Ultra Arm Mounting Kit (3/8-16 ARRI Accessory Mount)
Délai habituel entre 8 et 12 semaines
Preston MDR2 V-Lock Accessory Mount Kit
Délai habituel entre 8 et 12 semaines
Wooden Camera - LW 15mm Adapter (19mm)
Délai habituel entre 8 et 12 semaines
Wooden Camera - LW 15mm Adapter (15mm Studio)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (19mm Adapter)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (15mm Studio Adapter)
Délai habituel entre 8 et 12 semaines
Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 3")
Délai habituel entre 8 et 12 semaines
Attach this Arca-Type Riser Plate from Wooden Camera to your Canon EOS C80 cinema camera with the separately available Arca-type C400 baseplate, shoulder rig, or gimbal mount to achieve the proper lens height for integration and easy transitioning between rigs.
Délai habituel entre 8 et 12 semaines
The NATO Side Rail from Wooden Camera attaches to the separately available Canon EOS C80 top plate and provides a NATO rail for accessories such as handgrips. It also features 3/8"-16 anti-twist mounting threads along the length of the rail for alternative mounting options.
Délai habituel entre 8 et 12 semaines
Top Plate Kit (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
Attach this Arca-Type Riser Plate from Wooden Camera to your Canon C400 cinema camera with the separately available C400 baseplate to achieve the proper lens height for integration and easy transitioning between rigs.
Délai habituel entre 8 et 12 semaines
Unified DSLR 15mm Baseplate (Core Only)
Délai habituel entre 8 et 12 semaines
Rigging Top Plate for RED KOMODO-X
Délai habituel entre 8 et 12 semaines
Easy Riser (RED DSMC2)
Délai habituel entre 8 et 12 semaines
This bracket mounts onto the separately available Wooden Camera Front Top Plate assembly for ALEXA 35, and it allows you to mount your CCH-5 handle onto the camera using 15mm rod clamps.
Délai habituel entre 8 et 12 semaines
Wooden Camera - 4pin XLR to Alexa Mini / Mini LF (Straight, 120")
Délai habituel entre 8 et 12 semaines
Wooden Camera - 3pin XLR to Alexa Mini / Mini LF (Straight, 120")
Délai habituel entre 8 et 12 semaines
This D-Tap Braided Flexible Power Cable to RED DSMC1/DSMC2 from Wooden Camera is a special flexible version of the D-Tap to right-angle power connector for your camera.
Délai habituel entre 8 et 12 semaines
D-Tap to Sony FX9
Délai habituel entre 8 et 12 semaines
Tripod Head Pan Bar to ARRI Rosette
Délai habituel entre 8 et 12 semaines
Right Side Plate (RED DSMC2)
Délai habituel entre 8 et 12 semaines
15V Power Supply (RED Epic/Scarlet/Weapon/Scarlet-W/Raven)
Délai habituel entre 8 et 12 semaines
15V Power Supply (4pin XLR Female)
Délai habituel entre 8 et 12 semaines
15V Power Supply (Canon C300mkII)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (110mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (85mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Side Flags, Left & Right)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Extra Stage Set)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (87mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (80mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (95mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (104mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (114mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Attach this Wooden Camera Arca-Type Riser Plate to your Sony VENICE-series cinema to achieve the proper lens height for accessory integration.
Délai habituel entre 8 et 12 semaines
Rosette Arm (Short)
Délai habituel entre 8 et 12 semaines
Rosette Side Plate (URSA Mini, URSA Mini Pro / 12K)
Délai habituel entre 8 et 12 semaines
Telescopic Rosette Arm
Délai habituel entre 8 et 12 semaines
The Left-Side NATO Safety Bracket for Canon C70 from Wooden Camera offers protection, a detachable cable clamp, and multiple accessory mounts for your camera. This cage component mounts on the separately available Top Plate for C70.
Délai habituel entre 8 et 12 semaines
Alterna Cables - LCD/EVF Cable (RED, R/S, 36")
Délai habituel entre 8 et 12 semaines
The kit includes a 15mm LWS rod bracket and an accessory block that provides 3/8"-16 anti-twist threads on three sides. The components mount together on top of the PDM-1.
Délai habituel entre 8 et 12 semaines
Extend your original Canon EOS C400 top handle to mount additional accessories with this Top Handle Cheese-Style Plate from Wooden Camera. This plate mounts onto the top handle and provides 1/4"-20 and 3/8"-16 accessory threads; a front 3/8"-16 thread allows you to mount a bolt-on rod or rod clamp toward the front of the camera.
Délai habituel entre 8 et 12 semaines
Zip Box Pro 4x5.65 (100mm Clamp On Back Only)
Délai habituel entre 8 et 12 semaines
Mini Monitor Hinge (Canon C300mkIII, C500mkII)
Délai habituel entre 8 et 12 semaines
Hot Shoe Camera Handle
Délai habituel entre 8 et 12 semaines
Offset Mount and V-Lock Kit for Bolt 4K LT TX is a comprehensive kit that features a versatile mounting bracket for the Teradek Bolt 4K LT TX and a quick-release mounting dock for mounting directly to your camera.
Délai habituel entre 8 et 12 semaines
Alexa Mini Audio LEMO Compatible to 5pin Female XLR (18").
Délai habituel entre 8 et 12 semaines
Alterna Cables - LCD/EVF Cable (RED, R/R, 24")
Délai habituel entre 8 et 12 semaines
Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven)
Délai habituel entre 8 et 12 semaines
UMB-1 Right Side NATO Rail
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle (Brown Leather)
Délai habituel entre 8 et 12 semaines
Wooden Camera - Rosette Handle (Rubber)
Délai habituel entre 8 et 12 semaines
LW 15mm Bracket (RED DSMC2)
Délai habituel entre 8 et 12 semaines
Safety NATO Arm (RED DSMC2)
Délai habituel entre 8 et 12 semaines
A 3/8"-16 screw on one end of the extension can attach it to separately available connectors or other extension pieces. Multiple anti-twist 3/8"-16 and 1/4"-20 threads allow you to integrate articulating arms and on-camera monitors of your choice.
Délai habituel entre 8 et 12 semaines
Mount an accessory such as a monitor, microphone, plate, or extension arm onto your rig using this Universal Accessory Hinge from Wooden Camera.
Délai habituel entre 8 et 12 semaines
WC V-Mount (Dual D-Tap)
Délai habituel entre 8 et 12 semaines
This Wooden Camera Y-Shaped Cable connects your D-Box Power Strip to your Sony VENCIE Rialto 2 cinema camera to provide different power sources. This 9.2' cable can function as a replacement or modular addition to your preexisting gear.
Délai habituel entre 8 et 12 semaines
This 18.3' cable can function as a replacement or modular addition to your preexisting gear.
Délai habituel entre 8 et 12 semaines
Alterna Cables - LCD/EVF Cable (RED, R/S, 18")
Délai habituel entre 8 et 12 semaines
Top Mount Only (RED Komodo, ARCA Swiss)
Délai habituel entre 8 et 12 semaines
UVF Extension XL (Rail Only)
Délai habituel entre 8 et 12 semaines
Power Extension RED Komodo (120", Outward Right Angle)
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Handle Assembly Only)
Délai habituel entre 8 et 12 semaines
Mount accessories such as handles or extensions onto your ARRI ALEXA 35 cinema camera with this Right Side Bracket from Wooden Camera.
Délai habituel entre 8 et 12 semaines
D-Box Sony Rialto Power Strip Replacement Y
Délai habituel entre 8 et 12 semaines
D-Box Sony Rialto Power Strip Replacement Y C
Délai habituel entre 8 et 12 semaines
Mount accessories such as handles or extensions onto your ARRI ALEXA 35 cinema camera with this Left Side Bracket from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Quick Cage (BMC, Frame Only)
Délai habituel entre 8 et 12 semaines
This cage piece mounts directly onto the rear left side of the KOMODO-X and provides one 1/4"-20 and three 3/8"-16 anti-twist threads to add a variety of accessories.
Délai habituel entre 8 et 12 semaines
The Rosette Standoff from Wooden Camera is a Sony-standard rosette that attaches to the right side of the Sony BURANO rosette via a male screw mount.
Délai habituel entre 8 et 12 semaines
D-Tap to Sony A9, A7rIII (Dummy NP-FZ100)
Délai habituel entre 8 et 12 semaines
Add optional 15mm rods to the top of your Sony BURANO rig to mount a matte box, monitor, EVF, or follow focus using this Front 15mm LWS Dual-Rod Clamp from Wooden Camera.
Délai habituel entre 8 et 12 semaines
Power your FUJIFILM GFX 100S or X-H2S camera with this D-Tap to FUJIFILM NP-W235 Dummy Battery with a 12" cable from Wooden Camera. The device is compatible with any Gold mount or V-mount battery with an 11 to 17V output and a D-Tap port. It then outputs 7.2V via the dummy battery into your camera.
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Sony FX9, FS7, FS7mkII, Canon C100mkII, C300mkII, C100, C300, C500)
Délai habituel entre 8 et 12 semaines
Shoulder Rig v3 Replacement Shoulder Bend with Pad
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Small/Medium Bottom Bracket Only)
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Top Plate Only)
Délai habituel entre 8 et 12 semaines
Unified DSLR Cage (Large Bottom Bracket Only)
Délai habituel entre 8 et 12 semaines
Dual NATO Carriage
Délai habituel entre 8 et 12 semaines
This is the same dovetail assembly that comes with the Wooden Camera Cage for Panasonic GH6 A00141, and it can be used as a spare or replacement.
Délai habituel entre 8 et 12 semaines
This Wooden Camera Quick Release Top Plate is designed to slide onto your Sony VENICE Rialto/Rialto 2's top dovetail mount for seamless, tool-free attachment to expand the mounting points on your rig.
Délai habituel entre 8 et 12 semaines
The plate mounts onto the top front of the ALEXA 35 and provides mounting points for accessories such as the LCS-1 handle, an Ultra handle, a rod block, extension arms, a monitor mount, or an EVF.
Délai habituel entre 8 et 12 semaines
The plate mounts onto the top middle of the ALEXA 35, expanding the optional front and rear plates and providing mounting points for accessories such as the CCH-5 handle or dual rod bracket.
Délai habituel entre 8 et 12 semaines
AIR EVF Mount (19mm Tube Clamp Over 15mm LW Rods)
Délai habituel entre 8 et 12 semaines
Attach this Arca Riser from Wooden Camera to your RED KOMODO-X cinema to achieve the proper lens height for accessory integration and easy transitioning between heavy and lightweight rigs.
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Sony Venice, Rialto, F55, F5, URSA Mini)
Délai habituel entre 8 et 12 semaines
RED Komodo CTRL Control Cable (12", Outward Right Angle)
Délai habituel entre 8 et 12 semaines
Unified Baseplate Camera Dovetail (Canon C700)
Délai habituel entre 8 et 12 semaines
Gold Mount (Dual D-Tap)
Délai habituel entre 8 et 12 semaines
Accessory NATO Safety Rail (18")
Délai habituel entre 8 et 12 semaines
Simple 3pin Fischer Trigger Cable (120")
Délai habituel entre 8 et 12 semaines
This Front 15mm Dual Rod Clamp from Wooden Camera is designed to attach to the front of the quick release top plate for your Sony VENICE/VENICE 2/Rialto/Rialto 2 and provide upper 15mm rod clamps for accessory integration.
Délai habituel entre 8 et 12 semaines
D-Tap to Canon 5DmkIV, 5DmkIII, 5DmkII, 6D, 7D, 7DmkII, EOS R, R5, R6, BMMCC (20")
Délai habituel entre 8 et 12 semaines
D-Tap to Nikon D810, D800, D610, D7500 (20")
Délai habituel entre 8 et 12 semaines
This clamp mounts onto the Front Plate of the Wooden Camera Top Plate System using the two included 3/8"-16 thumbscrews and it provides a dual 15mm rod clamp with standard LWS spacing.
Délai habituel entre 8 et 12 semaines
The bracket mounts on top of the PDM-1, allowing you to mount the module onto separately available 15mm rods. The rod bracket can also be mounted along with the optional Wooden Camera Accessory Block for PDM-1.
Délai habituel entre 8 et 12 semaines
RED Komodo Timecode In/Out Cable (12", Outward Right Angle)
Délai habituel entre 8 et 12 semaines
AIR EVF Mount (19mm Tube Clamp Under 15mm LW Rods)
Délai habituel entre 8 et 12 semaines
UMB-1 Universal Mattebox (Bottom Flag)
Délai habituel entre 8 et 12 semaines