Au service des professionnels et passionnés
Filtres
Vinten's wide range of lightweight, studio and outside broadcast camera support equipment enables you to work the way you<
Vinten's wide range of lightweight, studio and outside broadcast camera support equipment enables you to work the way you choose without compromise.
Vinten 75mm bowl adpater fixing adaptor for 75mm tripods
1 pièce (s) en stock
Track Dolly and robotic head with elevation on motorised platform, includes absolute encoder for VR and PSU. No Prompting
Robotic/Manual Pedestal controlling elevation and X-Y position on the studio floor. Dead reckoning positioning system in robotic mode. Easily converts to full manual control in X and Y (Height robotic only).
Robotic/Manual Pedestal controlling elevation and X-Y position on the studio floor. Dead reckoning positioning system in robotic mode. Easily converts to full manual control.
VR/AR enabled 70Kg(155lb) payload head with high precision encoders (22bit), continously adjustable manual operation and robotic mode, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Fitted with internal StarTracker camera and CPU for realtime roaming positional updates. Includes pan bar...
70Kg(155lb) payload head, continously adjustable manual operation and robotic mode, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Fitted with internal StarTracker camera and CPU for realtime roaming positional updates. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
VR/AR enabled 70Kg(155lb) payload robotic only head with high precision encoders (22bit), integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Fitted with internal StarTracker camera and CPU for realtime roaming positional updates.Includes pan bar mount, two Vision pan bars, 3m ethernet and power...
70Kg(155lb) payload robotic only head, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Fitted with internal StarTracker camera and CPU for realtime roaming positional updates.Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
Quattro-L studio Foot
The Vinten V3852-0003 Quattro-L Pedestal is a high performance, 4-stage studio pedestal capable of handling a wide range of studio cameras.
Quattro-OBL - Outside Broadcast Pedestal. The Quattro is a unique and innovative four-stage pedestal with an extensive range of benefits for todays camera operator.
Quattro has become synonymous with studio & OB production, impressing the market w/ its unrivalled functionality & stunning ergonomics. The Quattro S is a compact pedestal designed for multi-camera studio locations, perfect for restricted sets & small studios.
VR/AR enabled 70Kg(155lb) payload head with high precision encoders (22bit), continously adjustable manual operation and robotic mode, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
70Kg(155lb) payload head, continously adjustable manual operation and robotic mode, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
Defined as a full studio version of the Osprey Elite, the Osprey Studio S 2-Stage Steering Pedestal from Vinten handles payloads up to 177 lb. The 2-stage design supports Vinten Vector heads, digital cinema and broadcast cameras, and full-size professional teleprompters.
FE-165 Elevation Unit. Robotic/Manual Pedestal controlling elevation position on the studio floor. Easily converts to full manual control. ax. payload incl. head: 75 kg (165 lb) Height Range: 700 to 1600 mm (28 to 63 I
VR/AR enabled 70Kg(155lb) payload robotic only head with high precision encoders (22bit), integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
70Kg(155lb) payload robotic only head, integrated PSU, 3 port Ethernet hub, LANC port and lens drive for full servo digital Canon and Fujinon lenses. Includes pan bar mount, two Vision pan bars, 3m ethernet and power cables.
The Osprey Elite S 2-Stage Steering Pedestal from Vinten is a portable studio pedestal designed for large payloads up to 177 lb, ideal for supporting large Vinten Vector heads, digital cinema and broadcast cameras, and full-size professional teleprompters.
The Osprey Elite S 2-Stage Steering Pedestal (OB) from Vinten is a portable outside broadcast pedestal designed for large payloads up to 177 lb, ideal for supporting large Vinten Vector heads, digital cinema and broadcast cameras, and full-size professional teleprompters.
Absolute Positioning System upgrade or the FP-145 and FP-188 pedestals to provide a targeting solution which does not require a floor target. Includes the APS laser scanner, internal cables and smaller steering ring .
Robotic Pedestal controlling elevation position on the studio floor.
Vector 750i Head
The Vision 250 Fluid Head with Osprey Plus Pedestal System from Vinten combines perfect balance with illuminated TF (Thin Film) drag control in a 2-stage pedestal system.
In the fast-paced realm of film and television production, where quickly setting up shots is a primary and critical goal, the Osprey Plus S 2-Stage Steering Pedestal (OB) from Vinten is the ideal lightweight and compact pedestal for your camera system in outside broadcast applications.
In the fast-paced realm of film and television production, where quickly setting up shots is a primary and critical goal, the Osprey Plus S 2-Stage Steering Pedestal from Vinten is the ideal lightweight and compact pedestal for your camera system in studio applications.
FE-55 Elevation Unit. Robotic Pedestal controlling elevation on the studio floor. ax. payload incl. head: 25 kg (55 lb) Height Range: 700 to 1400 mm (28 to 55 I
Maximum payload: 120.0 kg / 264.5 lbs. Minimum payload: 16.0 kg / 35 lbs.
16 Kg(35 lb)payload head, robotic only. Integrated PSU and lens drive for full servo digital lens from Canon and Fujinon. Supplied with 2m power and ethernet cables.
Vector 75 Fluid Head is modern, advanced update of their industry-standard Vector 70 head--with an improved carrying capacity, and stronger, more durable components.
Vector 430i Head Vector 430i head with one pan bar
Compact controller with integrated panel, 10.4 inches touchscreen and PC chassis to run VRC user interface software. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z movement) and rotary focus control.
Vision 250 Black (3465-3S) + 2nd telescopic swivel arm (3219-91) + EFP 2-stage Pozi-Loc aluminum tripod (3880-3) + EFP Au trolley (3497-3E)
For Studio Cameras and EFP configurations, e.g.Larger lenses, viewfinders in counterbalance range 10 - 33 kg. VB250-CP2M. Vision 250 (3465-3S). Dual Telescopic Pan Bars (3219-91). Two-Stage CF Pozi-Loc Tripod (3881-3). Spread-Loc (3781-3). Soft Case (3341-3).
Vision 250E Head with encoders for providing pan and tilt positional feedback.
For Studio Cameras and EFP configurations, e.g.Larger lenses, viewfinders in counterbalance range 10 - 33 kg. VB250-CP2. Vision 250 (3465-3S). Dual Telescopic Pan Bars (3219-91). Two-Stage CF Pozi-Loc Tripod (3881-3). Spreader (3363-3). Soft Case (3341-3).
Vision 250 Black (3465-3S) + 2nd telescopic swivel arm (3219-91) + EFP 2-stage Pozi-Loc aluminum tripod (3880-3) + Spread-Loc mid-level spreader (3781-3) + carrying bag (3341-3)
Vision 250 Black (3465-3S) + 2nd telescopic swivel arm (3219-91) + EFP 2-stage Pozi-Loc aluminum tripod (V4086-0001) + floor spreader (3313-3) + carrying bag (3341-3)
2-stage Studio pedestal, on shot stroke 41cm, with accessory holder and Quickfix
For smooth single-operator camera moves, crab or standard steering, and smooth 16" in-shot height adjustment, the Vinten Osprey Plus OB Pedestal System with Integrated Manual Pump is your go-to camera support for cameras and rigs weighing up to 154 lb.
The Vision 100 Fluid Head with Osprey Lite Pedestal System from Vinten combines perfect balance with TF (Thin Film) drag control in a 2-stage pedestal system
The Vinten Vector 430 Pan and Tilt Head, with a load bearing capacity of 22-94.8 lb (10-43 kg), is perfect for applications where compact box and large EFP barrel lenses are used.
Allows a thirdparty control system to integrate with the µVRC
VRC automation interface to enable the pre-set shots to be triggered by a playout system. Supporting vendors include Grass Valley, Sony, Ross, Snell, Mosart and Aveco.
Dual Joystick VRC Control Panel. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z) and rotary focus, iris and black controls. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
Analogue Lens Interface
Firmware upgrade to the robotic or manual/robotic heads and pedestal to enable tracking.
Single Joystick VRC Control Panel. 16 camera selection buttons, a 3-axis joystick (for control of P/T/Z) and rotary focus, iris and black controls. Includes GPIO, 12V PSU and 3m RS422 cable to VRC.
VRC-DJP focus LHS. Dual Joystick VRC Control Panel. 16 camera selection buttons, two 3-axis joysticks (one for control of P/T/Z, and one for X/Y/Z) and rotary focus control. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
Vision 100 (3466-3) + flowtech100 MS tripod (V4160-0003) + handle (S2051-1061) + carrying case (3340-3)
Vision 250 Black F, tripod attachment: 4-hole flat base, compl. with telescopic swivel arm
Height: 18.4 cm / 7.2 . Length: 15.9 cm / 6.3 . Width: 24.4 cm / 9.6 . Weight: 5.9 kg / 13 lbs. Tilt Range: ± 90? Capacity Range: 10 to 33 kg / 22 to 72.8 lbs.
Combining the Vision 100 fluid head and carbon fiber tripod legs, the Black Vision 100 Carbon Fiber Tripod System from Vinten provides sturdy support for ENG, EFP, and small cinema cameras with rigs while maintaining a lightweight and compact frame.
The Vinten VB100-AP2M is a Vision 100 tripod system. This system features the Vision 100 head, two-stage aluminum Pozi-Loc tripod and mid-level spreader. This system offers the user a great location set-up with the ability to accept a large camera package with accessories.
Vision 100 (3466-3), flowtech100 GS tripod (V4160-0002), carry handle (S2051-1061) & soft case (3340-3).
Vision 100 Black (3466-3) + 2 telescopic swivel arms (3219-91) + ENG 2-stage Pozi-Loc aluminum tripod (3821-3) + ENG AÜ trolley (V3955-0002)
For Camcorders in ENG & EFP configuration in counterbalance range 7 - 20 kg. VB100-CP2. Vision 100 (3466-3). Two-Stage CF Pozi-Loc Tripod (3772-3). Spreader (3363-3). Soft Case (3340-3).
Single Joystick VRC Control Panel. 16 camera selection buttons, a 3-axis joystick (for control of P/T/Z) and rotary focus control. Includes GPIO, 12V PSU and 3m RS422 serial cable to VRC.
Vision 100 Black (3466-3) + ENG 2-stage Pozi-Loc aluminum tripod (3821-3) + floor spreader (3363-3) + carrying bag (3340-3)
4.5 Kg(10 lb) payload head, robotic only. External 24v PSU with built in lens drive for full servo digital lens from Canon and Fujinon, Lanc interface and lens motor drive option.
Vision 10AS (V4046-0001) + flowtech100 MS (V4160-0003) + handle (S2051-1061) + carrying bag (3358-3)
Vision 10AS (V4046-0001) + ENG 2-Stage Pozi-Loc CF Tripod (3772-3) + Middle Spreader (3781-3) + Carrying Case (3358-3)
Vision 10AS (V4046-0001) + ENG 2-Stage Pozi-Loc Aluminum Tripod (3821-3) + Middle Spreader (3781-3) + Carrying Case (3358-3)
Vision 10AS (V4046-0001), flowtech100 GS tripod (V4160-0002), carry handle (S2051-1061), soft case (3358-3).
Easily transport your camera to quickly set up shots in a studio or on location with the Osprey Lite 2-Stage Steering Pedestal with PTZ Adapter from Vinten.
Vision 10AS (V4046-0001) Two-Stage CF Pozi-Loc (3772-3) Spreader (3363-3) Soft Case (3358-3)
Vision 10AS (V4046-0001) Two-Stage AluminiumPozi-Loc Tripod (3821-3) Spreader (3363-3) Soft Case (3358-3)
This lightweight and compact pedestal supports up to 77 lb and features a detachable skid, which allows the unit to be broken down into two sections for easy transportation and storage.
Vision 8AS (V4045-0001) + flowtech100 MS tripod (V4160-0003) + handle (S2051-1061) + carrying bag (3358-3)
Track termination. ( 2x track termination with shock absorbers, includes, magnetic strips and tooth belt track clap and belt)
Vision 8AS (V4045-0001) + ENG 2-Stage Pozi-Loc CF Tripod (3772-3) + Middle spreader set (3781-3) + Carrying Case (3358-3)
Vision 10AS (V4046-0001) Two-Stage CF Pozi-Loc (3772-3) Spread-Loc (3781-3) Soft Case (3358-3)
Vision 8AS (V4045-0001) Two-Stage Aluminium Pozi-Loc Tripod (3821-3) Middle Spreader set (3781-3) Soft Case (3358-3)
Vision 8AS (V4045-0001), flowtech100 GS tripod (V4160-0002), carry handle (S2051-1061) & soft case (3358-3).
Height: 15 cm / 5.9 . Length: 14.8 cm / 5.8. Width: 17.2 cm / 6.8 . Weight: 3.2 kg / 7.1 lbs. Tilt Range: ± 90?. Capacity Range: 7 to 20 kg / 15.4 to 44.1 lbs.
Vision 10AS (V4046-0001) Two-Stage AluminiumPozi-Loc Tripod (3821-3) Spread-Loc (3781-3) Soft Case (3358-3)
Vision 8AS (V4045-0001) Two-Stage CF Pozi-Loc Tripod (3772-3) Spreader (3363-3) Soft Case (3358-3)
Vision 8AS (V4045-0001), flowtech100 tripod with rubber feet (V4160-0004) & soft case (3358-3)
Vision 8AS (V4045-0001) Two-Stage AluminiumPozi-Loc Tripod (3821-3) Spread-Loc (3781-3) Soft Case (3358-3)
Vision 8AS (V4045-0001) Two-Stage AluminiumPozi-Loc Tripod (3821-3) Spreader (3363-3) Soft Case (3358-3)
HDT-2 Tripod Two-Stage 3902-3. Max Payload 120 kg / 264.5 lbs.
Vision 10AS Head (100mmball base, incl. 1 telescopic pan bar, camera plate and bowl clamp) - Black
Allows multiple µVRC to share control. Also allows interaction with HD-VRCs
Tracking Skid for Osprey Columns & HDT Tripods. Very robust and simple to set up.
The Vinten V5AS-CP2M Vision Pozi-Loc is an Carbon Fiber, Two Stage tripod system with Mid-Level Spreader and case.
Adds the ability to create keyframe based sequenced shot for Vinten ICE robotic products, and later
For use with the HDT-1 tripod, the elevation unit gives (no tripod supplied) a unit stroke of 46 cm / 18 for quick height range.
µVRC robotic controller, comprising 21" AIO touchscreen computer running Embedded Windows, USB compact joystick panel and the latest modular version of VRC software. Supports control of 4 Vantage heads with options to add further functionality through licensing
Vision 5AS (V4044-0001) Two-Stage CF Pozi-Loc Tripod (3776-3) Spreader (3363-3) Soft Case (3358-3)
VRC Geofencing License
Vision 8AS Head (100mmball base, incl. 1 pan bar, camera plate and bowl clamp) - Black
HDT-1 Tripod Single-Stage 3901-3. Max Payload 140 kg / 308.6 lbs.
Firmware upgrade to the robotic or manual/robotic head to enable tracking data output.
VRC software upgrade to the latest released version.
Tally input interface for up to 14 channels. Suitable for contact closure usage. Includes RS422 serial cable.
QBall Universal RCP to control up to 18 cameras. Desk Mounted, includes tally inputs, auto iris, white balance, colour gain, black control, black balance.
Vision blue5 Pan / tilt head (V4105-0001), Flowtech 75 tripod (V4150-0003) and carrying case FT 75 (V4150-1850
Vision blue5 head (V4105-0001), flowtech75 GS tripod (V4150-0002), carry handle (S2051-1061) and soft case flowtech75 (V4150-1850).
Touchscreen, VGA and DVI input.
Vinten Vantage external lens drive motor and mounting accessories
Increases the number of Vinten heads that can be controlled to unlimited