Studio Rail Accessories
- Visuals warranty extension
- Backup equipment free of charge during the warranty
- Service support 7/7 available via our 3 emergency mobile numbers (GE/ZH/TI)
- Internal after sales support, tech@visuals.ch
- Software and Firmware upgrades perform by our Service engineers
Studio Rail Accessories
-
Manfrotto FF3276 - Safety Cable
Safety Cable
18,00 CHF (tax excl.) 19,39 CHF (incl. taxes)11 pieces in stock
-
Manfrotto MA FF3210 - Bracket for Ceiling Attachment
Bracket for ceiling attachment of the rail. It is advisable to pre-assemble these brackets onto the rails at ground level to ensure correct alignment before screwing to a ceiling.
Usually ships within 1 to 2 weeks
15,00 CHF (tax excl.) 16,16 CHF (incl. taxes) -
Manfrotto MA FF3211 - Double Bracket for Rail Crossing
Double Bracket for Rail Crossing
Usually ships within 1 to 2 weeks
26,00 CHF (tax excl.) 28,00 CHF (incl. taxes) -
Manfrotto MA FF3212 - Mounting Bracket for Beams
"L" Shaped Mounting bracket for mounting a Sky Track Rail to a wall. Fix directly to the beam with your 4 screws. The rail can be mounted either longitudinally or transversely
Usually ships within 1 to 2 weeks
35,00 CHF (tax excl.) 37,70 CHF (incl. taxes) -
Manfrotto MA FF3214 - Girder Mounting Bracket
This can be fastened to tubes with diameters from 35mm to 50mm inclusive. It's used to directly support the rail that can be fixed in place either longitudinally or transversely. This bracket can be used as a brace for fixed supports, as well
Usually ships within 1 to 2 weeks
36,00 CHF (tax excl.) 38,77 CHF (incl. taxes) -
Manfrotto MA FF3214A - Bracket for Ceiling Attachment without Rod
Can be attached directly by screws or rods with a maximum diameter of 1/2''. Before mounting the bracket it is advisable to standardize the length of both the rods and screws. Fix the bracket between a nut allowing the screw on the inside of the bracket to protrude about 1,5cm.
Usually ships within 1 to 2 weeks
30,00 CHF (tax excl.) 32,31 CHF (incl. taxes) -
Manfrotto MA FF3214B - Rail Mounting Bracket with M12 Stud
Comprised of a bracket to be attached to the ceiling with 4 screws, a 1m long M12 rod completely threaded, 4 M12 nuts, and a bracket for the rail fixture. The rod can be cut to the desidered size and then attached to the bracket by way of the nuts supplied. The rod must protrude approx 1cm on the inside of the bracket.
Usually ships within 1 to 2 weeks
65,55 CHF (tax excl.) 70,60 CHF (incl. taxes) -
Manfrotto MA FF3215 - Adjustable Mounting Bracket for Irregular Ceilings
Allows height differences in ceilings of maximum 2cm; combining two brackets you can compensate for differences of maximum 4cm.
Usually ships within 1 to 2 weeks
47,00 CHF (tax excl.) 50,62 CHF (incl. taxes) -
Manfrotto MA FF3215A - Extension Bracket for Various Heights
Its length is adjustable from 10cm to 15,5cm. Using the clamp screw, you can obtain all intermediate sizes. Provided with a security lock, in case the regulating screw loosens, blocks the bracket at maximum extension. It's used to compensate for height differences in ceilings of 5,5cm or more, with combinations of other brackets.
Usually ships within 1 to 2 weeks
71,25 CHF (tax excl.) 76,74 CHF (incl. taxes) -
Manfrotto MA FF3216 - Ceiling Bracket 30 cm
Ceiling Bracket 30 cm
Usually ships within 1 to 2 weeks
48,00 CHF (tax excl.) 51,70 CHF (incl. taxes) -
Manfrotto MA FF3218 - Ceiling Bracket 50 cm
Ceiling Bracket 50 cm
Usually ships within 1 to 2 weeks
52,25 CHF (tax excl.) 56,27 CHF (incl. taxes) -
Manfrotto MA FF3220 - Ceiling Bracket 100 cm
Ceiling Bracket 100 cm
Usually ships within 1 to 2 weeks
76,95 CHF (tax excl.) 82,88 CHF (incl. taxes) -
Manfrotto MA FF3226 - Kit of 5 Cable Carriages
These are inserted from the end of the rail. They do not need wheels as they they slide along the rail and are suitable for normal cables.
Usually ships within 1 to 2 weeks
24,00 CHF (tax excl.) 25,85 CHF (incl. taxes) -
Manfrotto MA FF3226C - Kit of 5 Cable Carriages with Bearing
These are from the end of the rail and run on ball-bearings. They are suitable for heavy cables.
Usually ships within 1 to 2 weeks
51,30 CHF (tax excl.) 55,25 CHF (incl. taxes) -
Manfrotto MA FF3228 - Dismountable Carriage Black
This carriage can be inserted directly at any point on the rail by unscrewing the wheel plate. This is used when it becomes necessary to add a supplementary carriage to an already assembled RAIL SYSTEM installation. It is free-sliding and is suitable for normal loads.
Usually ships within 1 to 2 weeks
59,85 CHF (tax excl.) 64,46 CHF (incl. taxes) -
Manfrotto FF3229 - Carriage with 5/8'' Spigot and Brake
This is provided with a brake which keeps it locked in the position where it is placed. It is suitable for normal loads up to 60kg. To release brake pull down on wire with operating pole.
Usually ships within 1 to 2 weeks
60,00 CHF (tax excl.) 64,62 CHF (incl. taxes) -
Manfrotto MA FF3230 - Standard carriage
Standard carriage
Usually ships within 1 to 2 weeks
42,00 CHF (tax excl.) 45,23 CHF (incl. taxes) -
Manfrotto MA FF3232 - Double Carriage
Double Sliding Carriage, part of the IFF Studio Rail Suspension System. Carriage over free-sliding nylon wheels. Used to connect a mobile rail to a fixed rail.
Usually ships within 1 to 2 weeks
73,15 CHF (tax excl.) 78,78 CHF (incl. taxes) -
Manfrotto MA FF3235 - Double Carriage with Double Brake
The Sky Track Rail System is a modular overhead lighting suspension system which can be expanded or modified to your requirements. It provides prcise positioning of lights with ease and speed, eliminating the clutter of light stands and power cables on the floor. The system utilizes a combination of rails, carriages, telescopic posts, and manual...
Usually ships within 1 to 2 weeks
103,55 CHF (tax excl.) 111,52 CHF (incl. taxes) -
Manfrotto MA FF3236 - Double Carriage with Single Brake
This is provided with a brake on only one carriage. Normally, the carriage with brake is mounted on the fixed rail so that it is locked into place enabling the mobile rail to slide. If the carriage with brake is mounted onto the mobile rail, you obtain the opposite effect, that is, the sliding of the mobile rail gets blocked, while the carriage can freely...
Usually ships within 1 to 2 weeks
87,40 CHF (tax excl.) 94,13 CHF (incl. taxes) -
Manfrotto MA FF3240 - Extension Tube 50 cm long
Extension Tube 50 cm long
Usually ships within 1 to 2 weeks
49,00 CHF (tax excl.) 52,77 CHF (incl. taxes) -
Manfrotto MA FF3242 - Extension Tube 100 cm long
Extension Tube 100 cm long
Usually ships within 1 to 2 weeks
65,55 CHF (tax excl.) 70,60 CHF (incl. taxes) -
Manfrotto MA FF3248 - Telescopic Post Extendable from 85-203cm
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. It sustains loads from 1.5kg up to 12kg max.
Usually ships within 1 to 2 weeks
348,65 CHF (tax excl.) 375,50 CHF (incl. taxes) -
Manfrotto MA FF3249 - Telescopic Post Extendable from 60-128cm
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position. A female attachment with safety plug and locking lever is fitted at each end. The safety plug has a latch with push-button release latch with push-button release. It sustains loads from 1.5kg up to 12kg max.
Usually ships within 1 to 2 weeks
335,35 CHF (tax excl.) 361,17 CHF (incl. taxes) -
Manfrotto MA FF3257 - Spigot Adapter 5/8 inch Female - 1-1/8 inch Female
Part of the Sky Track Rail System. It has a 5/8" female receptor on one side and a 1-1/8" receptor on the other. It is used to attach fixtures or accesories that have a 1-1/8" Junior spigot. Load capacity: 220 lbs (100 kg)
Usually ships within 1 to 2 weeks
115,90 CHF (tax excl.) 124,82 CHF (incl. taxes) -
Manfrotto MA FF3531 - Spring for Counter Balancing Pantographs, Type 4, Red
Spring Type 4 Red. Additional spring for pantograph top 2C.
Usually ships within 1 to 2 weeks
99,75 CHF (tax excl.) 107,43 CHF (incl. taxes) -
Manfrotto MA FF3532 - Spring for Counter Balancing Pantographs, Type 12, Red
Spring Type 12 Red. Additional spring for pantograph top 2C.
Usually ships within 1 to 2 weeks
122,55 CHF (tax excl.) 131,99 CHF (incl. taxes) -
Manfrotto MA FF3533 - Spring for Counter Balancing Pantographs, Type 4, Blue
Spring Type 4 Blue. Additional spring for pantograph top 4C.
Usually ships within 1 to 2 weeks
107,35 CHF (tax excl.) 115,62 CHF (incl. taxes) -
Manfrotto MA FF3534 - Spring for Pantographs Type 12 (Blue)
Additional Spring for pantograph top 2C.
Usually ships within 1 to 2 weeks
137,75 CHF (tax excl.) 148,36 CHF (incl. taxes) -
Manfrotto MA FF3856 - Bracket With 16mm Spigot
The 16mm spigot allow the mounting of lights or accessories with 16mm female attachment.
Usually ships within 1 to 2 weeks
34,00 CHF (tax excl.) 36,62 CHF (incl. taxes)
- 1
- 2
-
Need help,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Need financing,
Call us!
