ALMOST NEW : KLOTZ MY206 Cable 150M, with Neutrik 3-pin XLR plugs
28 pieces in stock
PC-Soundcards, symmetrical transmission, stereo (INPUT 3,5 mm Plug stereo, OUTPUT XLR male) 1:1 transmission for 600 Ohm impedance, stereo Line up to 6V, frequency 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
5 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
7 pieces in stock
Stereo microphone cable. The Y-shape cable is assembled with 1x female XLR 5-pole to 2x male XLR 3-pole. (incl. left-right marking). The 5-pole connector is labelled.
1 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
15 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
10 pieces in stock
The Rycote Mic Tail Short XLR Cable features high-quality Neutrik XLR male and female connectors.
6 pieces in stock
Black instrument cable 2x 4 mm, with XLR male NC3MXX-BAG-D on one side and Mini Plug NYS231BG-LL on the other. Ideal cable to connect Notebooks, MP3-players or smart phones to an existing sound system.
12 pieces in stock
Connect a mic equipped with a 3.5mm TRS connector to the XLR input of a professional camera, recorder, or mixer with the Rode VXLR Pro, a durable inline adapter outfitted with a transformer-balanced output to ensure quality signal transfer over long cable runs.
5 pieces in stock
12Inches XLR-3F Right Angle to XLR-3M coiled “boom pole to mixer" cable - extends to 6 feet
5 pieces in stock
Black instrument cable 2x 4 mm, with 2x XLR female NC3FXX-BAG on one side and Mini Plug NYS231BG-LL on the other. Ideal cable to connect Notebooks, MP3-players or smartphones to an existing sound system.
10 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
6 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
1 pieces in stock
This balanced microphone cable is assembled with a female XLR NC3FXX-BAG to a REAN mini-plug NYS231BG. The boots and cable are black.
3 pieces in stock
Black instrument cable 2x 4 mm, with XLR male NC3MXX-BAG-D on one side and Mini Plug NYS231BG-LL on the other. Ideal cable to connect Notebooks, MP3-players or smart phones to an existing sound system.
16 pieces in stock
These unbalanced microphone cables are assembled with NC3FXX-BAG to NP2X-BAG. The cable is black and the boots are blue.
4 pieces in stock
These unbalanced microphone cables are assembled with NC3FXX-BAG to NP2X-BAG. The cable is black and the boots are red.
4 pieces in stock
These unbalanced microphone cables are assembled with NC3FXX-BAG to NP2X-BAG. The cable is black and the boots are yellow.
4 pieces in stock
These unbalanced microphone cables are assembled with NC3FXX-BAG to NP2X-BAG. The cable is black and the boots are green.
3 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
1 pieces in stock
This balanced microphone cable is assembled with a male XLR NC3MXX-BAG to a REAN mini-plug NYS231BG. The cable and boots are black.
1 pieces in stock
This balanced microphone cable is assembled with NC3FXX-BAG to NP3X-BAG. The cable and boots are black.
7 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
16 pieces in stock
This balanced microphone cable is assembled with NC3MXX-BAG to NP3X-BAG. The boots are black.
6 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
16 pieces in stock
The SC8 is a premium shielded extension cable for use with the VideoMicro and VideoMic GO microphones. Measuring 6m, the SC8 features gold plated contacts for superior audio reproduction.
3 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
1 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
22 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
3 pieces in stock
Kramers A35M/A35F cable is constructed of a two conductor cable with a male 3.5mm connector at one end and a female 3.5mm connector at the other. It is an outstanding solution for extending the cable length of infrared emitters and sensors.
1 pieces in stock
Black patch cable assembled with 2x mini plugs 3.5 mm 3pole (NYS231BG).
10 pieces in stock
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
17 pieces in stock
Connect your smartphone or other compatible device to the RODECaster Pro with the RODE SC9. The SC9 is a high-quality cable with two 3.5mm TRRS connections. It measures 4.9' long. Plug one connector into your compatible smartphone, the other into your RODECaster Pro, and you'll be able to route phone calls to your podcast recordings.
1 pieces in stock
This balanced microphone cable is assembled with a female XLR NC3FXX-BAG to a REAN mini-plug NYS231BG. The boots and cable are black.
10 pieces in stock
The VXLR+ is a 3.5mm female TRS socket to male XLR adaptor, which will convert 12-48V Phantom Power down to 3-5V 'Plug in Power', allowing R?DE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2 Headset Mic to receive power from the XLR input
12 pieces in stock
Kramers A35M/A35F cable is constructed of a two conductor cable with a male 3.5mm connector at one end and a female 3.5mm connector at the other. It is an outstanding solution for extending the cable length of infrared emitters and sensors.
1 pieces in stock
Black patch cable assembled with 2x mini plugs 3.5 mm 3pole (NYS231BG).
10 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
5 pieces in stock
1/8 inches to FXLR Cable for Sennheiser SK Series Bodypack Transmitter.
17 pieces in stock
Add a Lav Mic to your camera with this mini XLR adapter. This 12" Mini XLR to 3.5mm TRS Locking Jack Socket Adapter Cable can be used with a with a variety of cameras and setups including the Canon C70 & BMD Pocket 4K/6K Camera & Video Assist 4K.
24 pieces in stock
The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones. Measuring 6m, the SC1 features gold plated contacts for superior audio reproduction.
10 pieces in stock
The Sennheiser CL100 is a connecting cable with a standard 1/8" (3.5mm) mini and unbalanced XLR male connections. The cable is specifically designed for connecting the Evolution series portable EK series receivers to the audio inputs on Beta Cameras, mixers, amplifiers, etc.
7 pieces in stock
Connecting cable for MCE 58, MCE 86 S (II) when batterypowered with 3 pin XLR-female and 3,5mm stereo jack plug, 0.35 m (Dual-Mono).
1 pieces in stock
The 10.9" long Rode SC11 is a TRS Y-splitter cable designed for connecting the mono outputs of two devices such as camera-mount microphones or wireless receivers to the stereo input of a mirrorless camera, DSLR, or camcorder. It is wired to send each connected source to a separate channel rather than summing them to mono.
1 pieces in stock
This Rode Mini Phone VideoMic Cable is a 10' long extension cable that can be used to position the VideoMic up to 10' away from the video camera. For the most of its length this cable is straight, but also features a short coiled section on the side of the mic connection.
9 pieces in stock
XLR Female to 1/8" TRRS Male Cable
6 pieces in stock
COLORS 2 is a set of four coloured windshields, cable identification rings, tags and a sticker sheet for use with the Wireless GO, Wireless GO II, Lavalier GO and smartLav+, making it easy to keep tracking of who is talking on each microphone in multi-mic setups.
5 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
5 pieces in stock
The SC16 is a high-quality USB-C to USB-C cable designed to connect RODE microphones with a USB-C output to USB-C compatible devices. Measuring 300mm long, the cable is ultra-flexible, allowing you to attach it to your devices with ease. It also features an in-built cable grip that is compatible with the VideoMic NTG shock mount cable management system.
2 pieces in stock
The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback.
9 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
23 pieces in stock
The SC3 is a high-quality shielded adaptor, designed to allow the smartLav to connect to 3.5mm TRS devices such as cameras and audio recorders. The gold-plated contacts are colour coded, with grey indicating the TRRS input.
10 pieces in stock
The SC7 is a high-quality shielded patch cable, designed to allow the VideoMic GO to connect to TRRS compatible devices such as the iPhone or iPad. The gold-plated contacts are colour coded, with grey indicating the TRRS output.
7 pieces in stock
The SC4 is a high-quality shielded adaptor, designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets. This is ideal for users wanting to connect their R?DE VideoMic to their iPhone, and record using the R?DE Rec app for iOS. The gold-plated contacts are colour coded, with grey indicating the TRRS output.
9 pieces in stock
The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use.
9 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
4 pieces in stock
The VXLR from Rode Microphones is an adapter that converts a 3.5mm mono mini jack input to a male XLR output. It can also accept a stereo input, but will send a mono signal to left and right channels.
5 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
3 pieces in stock
3,5 mm stereo jack to 6,35 mm stereo plug
5 pieces in stock
Kramers A35M series mini audio cables are constructed from high-quality shielded pair style cable terminated with molded male 3.5mm stereo connectors on both ends.
11 pieces in stock
XLR M to XLR F Mic Cable 5m
2 pieces in stock
XLR M to XLR F Mic Cable 3m
5 pieces in stock
XLR M to XLR F Mic Cable 1m
2 pieces in stock
Dummy-plate to cover D-shape cutouts, White
6 pieces in stock
Velcro strap, red, width 16 mm, length 200 mm, with Contrik imprint.
25 pieces in stock
Black, highly flexible multi-pair audio cable, 8 x 2 x 0.22 mm2, insulated in pairs with spiral shield and drain wire, with PVC/rubber jacket and an outer diameter of 14.9 mm.
This black active speaker cable has one power line with 3 x 1,5 mm2 and 2x digital audio wires with 2 x 0,34 mm2 (110 ohm) wires. It is suitable for DMX as well as for AES/EBU and analogue audio signals. The combination of audio and power supply in one cable saves a lot of time during installation.
Speaker Cable, Draka 2 x 2.5 mm2, halogen free, flame-retardant according to IEC 60332-1, wire insulation FRNC.
High-quality low-smoke, halogen free twisted pair cable designed for connecting speakers and amplifiers in commercial or residential AV systems.
Black, highly flexible multi-pair audio cable, 4 x 2 x 0.22 mm2, insulated in pairs with spiral shield and drain wire, with PVC/rubber jacket and an outer diameter of 11.6 mm.
Speaker cable with FRNC jacket, 4 x 2.5 mm2, outer diameter 11,2 ± 0,4 mm, flame-retardant according to IEC 60332-1, wire insulation PE.
Speaker Cable, Speakonflex, 4 x 2.5 mm2, outer diameter 11,2 mm, high-flexible, black.
Black, analogue multi-pair audio cable, 4 x 2 x 0.22 mm2, screened and insulated pairs, with PVC/rubber jacket and an outer diameter of 9,1 mm ± 0,5 mm.
Swissflex Premium PVC 1x0.5mm2, 500m
Speaker Cable, Speakonflex, 2 x 2.5 mm2, outer diameter 8 mm, high-flexible, black.
Analog Swissflex Premium Microphon cable, 2 x 0.50 mm2 , double spiral shielded, PVC jacket, black, outer diameter 6.8 mm.
Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar dummy elements, outer diameter 6.5 mm, with Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar stranded wires, outer diameter 6.5 mm, with DMC Flex PUR jacket, 110 Ohm.
CAS-OPTICALCON ADV
Speaker cable with FRNC jacket, 4 x 4 mm2, outer diametr= 12 ± 0.4 mm, flame-retardant according to IEC 60332-1, wire insulation PE
This black speaker cable features a high flexibility, Speakonflex, 2 x 4 mm2, outer diameter 9,2 mm.
Black, 2-pair microphone cable with 2 x 2 x 0.19 mm2, PVC jacket, double spiral shield and an outer diameter of 5.4 mm. Due to the 4-stranded assembly, the cable guarantees an interference-free transmission even over longer distances.
Drum 460mm + auxiliary spool WBR 250mm
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of wires, conducts and lines. These cable reels are stackable with SK 4700 or SK 4730.
Microphone - Cable, 1 pair, (2x 0.22 mm2), AES/EBU with spiral shield, DMC Flex PVC jacket, black, amplify with Kevlar dummy elements, outer diameter 6,5 mm, adjustment: W, 110 Ohm.
High-quality low-smoke, halogen free twisted pair cable designed for connecting speakers and amplifiers in commercial or residential AV systems.
Black, balanced microphone cable, 2 x 0,22 mm2, with FRNC jacket, compliance: CE, EN 50575:2014+A1:2016, CPR: Dca, with double spiral shield and Visco wires, with an outer diameter of 5.8 mm.
Speaker Cable, Speakonflex, 8 x 2.5 mm2, outer diameter 14,5 mm, high-flexible, black.
IP65 COUPLER SMAPC MTP24 ADV TPC
Black, dual Siam instrument cable, 2 x 1 x 0.22 mm2, with spiral shield, PVC jacket and an outer diameter of 2 x 4 mm.
Multipair audio cable, 2 x 2 x 0.22 mm2, screened and insulated pairs, outer diameter 7,2 mm ± 0,5 mm.
Speed boot assembly tool to press the XX boot onto shell
Speakercab. 2x1.5mm2, Cca s1a-d0-a1 300m
Bantam Cable, Swissflex, 2 x 2 x 0.19 mm2, outer diameter 2 x 4 mm, spiral shield, black.
2x24 TB (BP0316/MIL-P-642/2) jacks, full normalled (programmable), push terminals, wire O.D. 0,08 - 0,5 mm2 (AWG 28 - 20), stripping length 5 - 6 mm (0,236 in)
Special steel cable reel for daily rugged stage applications in proven quality. Portable sheet steel cable drum with RM-cover, for winding on both sides, with 2-fold axle bearing and swivelling crank handle. It has a core diameter of 281 mm.
Speaker Cable, 2 x 1.5 mm2, outer diameter 6.2 ± 0.2 mm, high-flexible, black.
Optional External Power Supply Link Cable for M7CL-48/ES & M7CL-32
Cable Drum HT582
Speaker cable with FRNC jacket, 2 x 1.5 mm2, outer diameter 6.2 ± 0.4 mm, flame-retardant according to IEC 60332-1, CPR: Eca, wire insulation PEE.
Black bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm.
Black microphone cable (Swissflex NK2) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.5 mm.
The ZNK 2/3 cable is very thin and therefore matches the nanoCON Series best. It is also recommendable for installations with little space in the cable duct or for use in medical technology. The transmission mode is analogue and the cables have balanced signals.
Black, unbalanced instrument cables (Swissflex NK1) with 1 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.2 mm.
This black active speaker cable has one power line with 3 x 1,5 mm2 and 2x digital audio wires with 2 x 0,34 mm2 (110 ohm) wires. It is suitable for DMX as well as for AES/EBU and analogue audio signals. The combination of audio and power supply in one cable saves a lot of time during installation.
Speaker Cable, Speakonflex, 4 x 2.5 mm2, outer diameter 11,2 mm, high-flexible, black.
Black, digital AES/EBU 110 ohm switchboard cable with 1 x 2 x 0.22 mm2, an outer diameter of 3.8 mm and PVC jacket.
Switchboard cable, FRNC, 110 Ohm, AES/EBU, halogen-free, 1x 2x 0.22 mm2, foil screened, parallel stranded wire, outer diameter 3.8 mm.
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of cables. These cable reels are stackable.
Ultra Hi-Spec Long USB Cable 25 m for CS-800/CS-500 (type A to C).
Black, single-pair switchboard, 1 x 2 x 0.51 mm2 (AWG ~20), with tin-plated copper wire, foil screen as well as drain wire, PVC jacket and an outer diameter of 3.5 mm.
Inline Female audio 24 pole / video 6XRG59 + Dust Cap
Inline Female audio 24 pole / video 6xRG59
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Microphone cable with rotatable swivel mount for microphones with a thread, and double twist braiding as shield. It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Diameter 5 mm, length 10 m. XLR 5 connectors
Microphone cable with rotatable swivel mount for microphones with a thread, and double twist braiding as shield. It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Diameter 5 mm, length 10 m. XLR 5 connectors
Cable Drum GT450
The matcher is particularly suitable for external floor sockets 2x FLF as a multifunctional stereo audio input. All signals are galvanically isolated via a special audio transmitter and led level adapted to a joint clamp output.
Speaker Cable, Draka 2 x 2.5 mm2, halogen free, flame-retardant according to IEC 60332-1, wire insulation FRNC.
The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an individual external closure to ground. A momentary closure to...
2x24 TB (BP0316/MIL-P-642/2) jacks, half normalled bottom row (not programmable), solder terminals
Black FLF mounting plate, equipped with one splitter, which is particularly suitable for recording existing balanced stereo transmissions (e.g. interpreter equipment). Galvanic isolation is offered as well as an additional level-adjusted unbalanced RCA output signal.
Microphone cable with rotatable swivel mount for microphones with a thread, and double twist braiding as shield. It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Diameter 5 mm, length 10 m. XLR 3 connectors
Microphone cable with rotatable swivel mount for microphones with a thread, and double twist braiding as shield. It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Diameter 5 mm, length 10 m. XLR 3 connectors
Panel female audio 24 pole / video 6XRG59
The assembly tool HX-TT-1 consists of a crimp tool and a press tool to assemble NP3TT-1-* and NP3TT-AU-* plugs.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Inline male audio / video 6XRG59 + Dust Cap
This cable reel is made of sheet steel, has a core diameter of 320 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Panel female audio 24 pole / video 6XRG59
Cable Drum GT380
Black open plastic cable reel with a core diameter of 170 mm. Special portable and stackable version for professional rental business. Empty weight of 4.4 kg.
Panel male audio 24 pole / video 6xRG59
Standard Circular Connector POSITIONER MINICON MPC MALE CRIMP W/ HX
Speakercab. 2x1.5mm2, Cca s1a-d0-a1 100m
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Speaker Cable, Speakonflex, 2 x 2.5 mm2, outer diameter 8 mm, high-flexible, black.
Black microphone cable on the cable reel KTGT310, assembled with 2x Neutrik convertCON 3-pole XLR cable connectors, (NC3FM-C-B, male to female). The cable ZNK 2/6-BL has a length of 50 m.
Analog Swissflex Premium Microphon cable, 2 x 0.50 mm2 , double spiral shielded, PVC jacket, black, outer diameter 6.8 mm.
Microphone cable with double twist (double helix) braiding as shield. Diameter 5 mm, length 10 m. XLR 5 connectors
Cable Bus to link DA-410 to DA-240
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar dummy elements, outer diameter 6.5 mm, with Rugged, balanced microphone cable AES / EBU, 1 pair, 2 x 0.22 mm2, with spiral shield, amplified with Kevlar stranded wires, outer diameter 6.5 mm, with DMC Flex PUR jacket, 110 Ohm.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Tascam standard.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Yamaha standard.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
Optional balanced cable, for TH-900mk2 and TH-610
Usually ships within 4 weeks
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Bantam Cable, Swissflex, 2 x 2 x 0.19 mm2, outer diameter 2 x 4 mm, spiral shield, black, halogen free, adjustment: K/HS
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3FXX.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3MXX.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Yamaha standard.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Tascam standard.
Replacement cable, unbalanced, for TH-900mk2 and TH-610
Usually ships within 4 weeks
Interface cable ZNKMP8/14 (Multicore analog 11.7 mm, 8 x 2 strands 0.22 mm2, PVC-coating black), D-Sub 25 pole male to D-Sub 25 pole male.
Cable with double twist (double helix) braiding as shield. Diameter 5 mm, length 10 m. DIN 8 connectors
Interface cable ZNKMP8/14 (Multicore analog 11.7 mm, 8 x 2 strands 0.22 mm2, PVC-coating black), D-Sub 25 pole male to D-Sub 25 pole male.
XP Opt. Chassis Con M
DigiTorc 4 Breakout Cable, 4 Inputs, 4 Outputs
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3FXX.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3FXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
Car Hifi, Line, RCA Stereo-Cable, 20cm (INPUT RCA female / female, OUTPUT RCA male / male) 1:1 transmission for 600 Ohm impedance, stereo Line up to 6V frequency response of 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 4 x NC3FXX / 4 x NC3MXX; side b: 4 x NC3MXX / 4 x NC3FXX. inkl. XXCR and coloured boots BXX (brown, red, orange and yellow).
Interface cable ZNKMP8/14 (Multicore analog 11.7 mm, 8 x 2 strands 0.22 mm2, PVC-coating black), D-Sub 25 pole male to D-Sub 25 pole male.
Speaker cable with FRNC jacket, 2 x 1.5 mm2, outer diameter 6.2 ± 0.4 mm, flame-retardant according to IEC 60332-1, CPR: Eca, wire insulation PEE.
9m ZNKMP8/14 Multicore cable 11.7 mm, 8x2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3MXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3MXX.
Interface cable ZNKMP8/14 (Multicore analog 11.7 mm, 8 x 2 strands 0.22 mm2, PVC-coating black), D-Sub 25 pole male to D-Sub 25 pole male.
ANTENNA CABLE RG142BU SMA 4.5M
ANTENNA CABLE S04162B SMA 15M
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Tascam standard.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Yamaha standard.
Black, balanced microphone cable, 2 x 0,22 mm2, with FRNC jacket, compliance: CE, EN 50575:2014+A1:2016, CPR: Dca, with double spiral shield and Visco wires, with an outer diameter of 5.8 mm.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3FXX.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3FXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 4 x NC3FXX / 4 x NC3MXX; side b: 4 x NC3MXX / 4 x NC3FXX. inkl. XXCR and coloured boots BXX (brown, red, orange and yellow).
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3MXX.
6m ZNKMP8/14 Multicore cable 11.7 mm, 8x2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3MXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
Ultra Hi-Spec Long USB Cable 10 m for CS-800/CS-500 (type A to C).
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Yamaha standard.
Digital cable ZNK CT2956401-BL (digital multicore AES / EBU), 14.9 mm, with 8x 2 wires 0.22 mm2, in black PVC jacket, with 25-pin D-Sub connector to 4x 3-pin XLR -Cable connector NC3MXX-BAG and 4x 3-pin XLR cable sockets NC3FXX-BAG, assigned according to the Tascam standard.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3FXX.
Car Hifi AUX Input 3.5 mm stereo plug, output 2x RCA male 1:4 transfer of a signal with 200 Ohm impedance, stereo line up to 1.2V, frequency response 30Hz-40KHz. Signal transmission 1:4 (NTM4) with separated earth, prevents interferences and hum loops. Particularly suited to connecting external sources with earphone jacks to an AUX input (audio radio)...
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Flap with auxiliary coil ZU GT 450, SK 450
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NC3MXX.
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 4x 4-pole speakON NLT4MX-BAG, 2-pole wired.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
9m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
9m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
9m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3FXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 4 x NC3FXX / 4 x NC3MXX; side b: 4 x NC3MXX / 4 x NC3FXX. inkl. XXCR and coloured boots BXX (brown, red, orange and yellow).
LS Cable 2x1.5 mm2, Diameter 6mm White, 100M
3m ZNKMP8/14 Multicore cable 11.7 mm, 8x2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3MXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
Bantam Cable, Swissflex, 4 x 0.22 mm2 + spiral shield, outer diameter 4.7 mm
Microphone cable Kevlar AES/EBU,PVC INDOOR,100M
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
Black microphone cable with 2 x 0.22 mm2, double spiral shield and Visco wires, PVC jacket and with an outer diameter of 6 mm.
Bantam Cable, Swissflex, 2 x 2 x 0.19 mm2, outer diameter 2 x 4 mm, spiral shield, black.
Black, dual Siam instrument cable, 2 x 1 x 0.22 mm2, with spiral shield, PVC jacket and an outer diameter of 2 x 4 mm.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3FXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
Die for Crimp XLR XX-HA. Suitable for tool HX-R-BNC. Standard B-crimp acc. to IEC 60352-2. Wire size AWG 24-22, 0.22 - 0.34 mm2
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 4 x NC3FXX / 4 x NC3MXX; side b: 4 x NC3MXX / 4 x NC3FXX. inkl. XXCR and coloured boots BXX (brown, red, orange and yellow).
Cascade cable, 3m, D-Sub half Pitch 68 pin
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 4x 4-pole speakON NLT4MX-BAG, 2-pole wired.
1m ZNKMP8/14 Multicore cable 11.7 mm, 8x2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3MXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
6m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
6m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
6m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
Optional cable for TH-909, TH900mk2 and TH-610
Usually ships within 4 weeks
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Connection cable with PTT, open ends
40m extension coax cable with SMA male connectors
3m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
3m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
3m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
Speaker Cable, 2 x 1.5 mm2, outer diameter 6.2 ± 0.2 mm, high-flexible, black.
15" Right Angle TA5F to (2) Low-Profile XLR-3M, cable for Lectrosonics SRc5P/SRb5P receiver outputs into field mixers/recorders, (CH1 Blue/CH2 Red), 4-position adjustable TA5F at 0degree, 90 degree, 180 degree and 270 degree
24" (60cm) Right Angle TA5F to (2) Low-Profile TA3F cable
Y-speaker cables with 1x 8-pole speakON NLT8MX-BAG to 2x 4-pole speakON NLT4MX-BAG connectors, 4-pole wired.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
15m Muco 4 x XLR f / 4 x XLR
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
24" LPS Low-Profile cable for Lectrosonics SRc5P / DSR4 outs to XLR Inputs
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
3m Y-speaker cable with one 8 pole speakON NLT8MX-BAG to 4 x speakON NL4FX 2 pole wired.
XP Opt. Chasis CON F
Combiner Line combines left and right channel of stereo signal by means of a passive network. afterwards the circuit is balanced by a NTL transformer (galvanic isolation) and terminated by a male XLR output. Especially used for stereo equipment with asymmetric outputs (RCA) for connections to a symmetric input (XLR female)
Distributes symmetrical mono output signal of a source to 2 RCA outputs+ (asym.) L + R. Via NTL1 (galvanic isolation) and a downstream passive network. Especially suited for transmission lines that should remain symmetric and be rendered asymmetric directly before arriving at the user (recipient).
Microphone cable with double twist (double helix) braiding as shield. Diameter 5 mm, length 10 m. XLR 3 connectors, matte black
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
Y-speaker cables with 1x 8-pole speakON NLT8MX-BAG to 2x 4-pole speakON NLT4MX-BAG connectors, 4-pole wired.
DI-Adapter Mic 2 / 200 Ohm / 1:1
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 2x speakON NL4FX 4-pole wired.
Black bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm.
Connects between the microphone head and the XLR module to make the microphone
1m Y-speaker cable with one 8 pole speakON NLT8MX-BAG to 4 x speakON NL4FX 2 pole wired.
Ground-Loop-Insulator, Line XLR female/XLR male, 1:1 transmission for 600 Ohm impedance, Line up to 6V, frequency 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
Adapter Line, asymmetrical transmission XLR fem./RCA fem., 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Adapter Line, symmetrical transmission XLR male / RCA female, 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
OPTION: Audio Breakout cable 25 SubD to 4 Male and 4 Female XLR. A 20% restocking fee applies to all product returns.
OPTION: Audio Breakout cable 25 SubD to 8 x Male XLR. A 20% restocking fee applies to all product returns.
The ZNK 2/3 cable is very thin and therefore matches the nanoCON Series best. It is also recommendable for installations with little space in the cable duct or for use in medical technology. The transmission mode is analogue and the cables have balanced signals.
OPTION: Audio Breakout cable 25 SubD to 8 x Female XLR. A 20% restocking fee applies to all product returns.
Microphone Cable 5-Pol XLR female to 2x 3-Pol XLR male
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 2x speakON NL4FX 4-pole wired.
10m Muco 4 x XLR f / 4 x XLR
Black microphone cable (Swissflex NK2) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.5 mm.
Black, unbalanced instrument cables (Swissflex NK1) with 1 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.2 mm.
Phantom Audio Adapter Hardwired Version
Usually ships within 4 weeks
Y-cable with one XLR 5 F connector and two XLR 3 M connectors. It is used to split two-channel signals into two mono channels, when using, for example, the BS 48 i-2 power supply
VT1126-S3.5 - with 3.5mm SONY locking connector for Sennheiser Evolution Series
Usually ships within 4 weeks
VT1126-SK50 - with Lemo 3-pin connector for Sennheiser SK50, 2000 Series
Usually ships within 4 weeks
VT1126-TA3/A - with TA3F connector for AKG
Usually ships within 4 weeks
VT1126-TA5/A - with TA5F connector for Lectrosonics SMB, SMDB or UM & LM Series
Usually ships within 4 weeks
VT1126-TA4/A - with TA4F connector for Shure + Sabine
Usually ships within 4 weeks
Phantom Modules for Audio Limited 6 Pin. The VT1126 phantom adapter is a small unit that allows hard-wired use of miniature lavalier microphones. It converts 48V phantom to electret power and puts out the audio as an electronically balanced signal on an XLR 3-pin male connector.
Usually ships within 4 weeks
Phantom Audio Adapter for Micron Explorer with 6 Pin
Usually ships within 4 weeks
Phantom Audio Adapter for Micron 8 pin system
Usually ships within 4 weeks
Phantom Audio Adapter for Sennheiser 1 Pin
Usually ships within 4 weeks
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
Kramers GMA series are high-performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations that require an audio signal as well.
Kramer's C-MGMA/MGMA is a micro sized, high-performance cable for computer graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both ends.
Speaker cable ZNK 2/10 (2x4 mm2) black, speakON NL4FX on each side.
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
9m Muco 4 x XLR f / 4 x XLR
Ground loop insulator line phono jack to phono jack, 1:1 transmission for signals with 600 ohm impedance, Line up to 6 V, 30Hz-40KHz frequency. Transmission with ground lift 1:1 (NTL1), interferences and ground loops can be avoided.
Antenna Cable for SpeechLine Digital Wireless Receiver, 20m
6" TA5M to 3-pin Locking (LEMO) Adaptor cable
Black, digital AES/EBU 110 ohm switchboard cable with 1 x 2 x 0.22 mm2, an outer diameter of 3.8 mm and PVC jacket.
Switchboard cable, FRNC, 110 Ohm, AES/EBU, halogen-free, 1x 2x 0.22 mm2, foil screened, parallel stranded wire, outer diameter 3.8 mm.
Audio Breakout cable 15 SubD to 4 x Male XLR. A 20% restocking fee applies to all product returns.
OPTION: Audio Breakout cable D-Sub 15 to 2x Male + 2x Female XLR. A 20% restocking fee applies to all product returns.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
The DPA DAD6004 is a MicroDot to 6-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio Limited TX 2000 and TX 2020 wireless transmitters.
An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio Technica 3000 Series (Generation 4), 5000 Series ( Generation 3), 6000 Series.
The 66' Microphone Cable with Slim XLR Connector from DPA Microphones is an installation solution that uses Mogami cable and an ultra slim XLR housing.
Right-angled MCX plug to right-angled SMA plug (pack of 2)
Usually ships within 4 weeks
18" LPXLR-3F to LPXLR-3M Premium Coiled "Boom pole to Mixer" cable
Black, single-pair switchboard, 1 x 2 x 0.51 mm2 (AWG ~20), with tin-plated copper wire, foil screen as well as drain wire, PVC jacket and an outer diameter of 3.5 mm.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
6m Muco 4 x XLR f / 4 x XLR
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
N connection cable, low attenuation, length: 20 m
These Premium instrument cables were assembled with ZNKP 1/7 MKII black and with NP2X-B to NP2X-AU-SILENT. The boots are available in black.
Black, balanced Premium microphone cable (ZNKP 2/7, 2 x 0.5 mm2, Swissflex) with 3-pole XLR female cable connector NC3FXX-B to XLR male cable connector NC3MXX-B, both with gold-plated contacts and black bushings.
Connects between the microphone head and the XLR module to make the microphone
20m extension coax cable with SMA male connectors
24" TA5F to (2) XLR-3M Lectrosonics SRc5P/SRb5P receiver cable, Mogami cable, Neutrik
WPMC - watertight F/MINI 2.5mm for Lectrosonics WM
Usually ships within 4 weeks
Flap for GT 450, SK 450
50m Intercom extension Cable 5 pin XLR connector for use in combination with ITC-100SL max. 200 mtr. Two year warranty after registration on Datavideo's official website.
Usually ships within 3 to 4 weeks
These Premium instrument cables were assembled with ZNKP 1/7 MKII and with NP2X-B to NP2RX-B. The boots are available in black.
These Premium instrument cables were assembled with the ZNKP 1/7 MKII cable and with NP2X-B to NP2X-B. The boots are available in black.
The CMX2218 MicroDot Extension Cable for Table Shock Mount from DPA is designed to make the SC4098-M microphone (sold separately) fit any 19mm diameter podium or table mount.
18" "Y" Camera Hops 2-channel cable for Lectrosonics DCHT Input, (2) TA3F to TA6F, (CH1 Blue/CH2 Red)
18" Low-Profile "Y" Camera Hops 2-channel cable for Lectrosonics DCHT Input, (2) LPXLR-3F to TA6F, [CH1 Blue/CH2 Red]
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
3m Muco 4 x XLR f / 4 x XLR
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
Speaker cable ZNK 2/10 (2x4 mm2) black, speakON NL4FX on each side.
Cover with lockable door for GT380 and SK 380
Black patch cable assembled with 2x mini plugs 3.5 mm 3pole (NYS231BG).
Connector
Usually ships within 4 weeks
Drum plate HT582
18" Low-Profile AES DIGITAL Camera Hops cable for Lectrosonics DCHT Input, LPXLR-3F to TA6F, (CH1 / CH2)
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
Kramer's Hydra multi-head cables contain a 15-pin HD (M), 3.5mm (M) & 3 RCA (M) cables. They are designed for applications that require multiple signals in a single jacket.
Speaker cable ZNK 2/9 (2 x 2,5 mm2) black, Speakon NL4FX on each side
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
The DPA DAD3051 is a MicroDot to 4-pin Hirose adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with the Ramsa WX-RP410 bodypack transmitter.
The DAD6001 is an adapter featuring XLR-male and MicroDot connections. The adapter is designed to attach DPA microphones to external phantom power sources such as preamps, mixers, etc. This version features a belt clip for added convenience while using in mobile situations.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The DPA DAD6033 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio-Technica AEW-T1000 D UniPak.
The 33' Microphone Cable with Slim XLR Connector from DPA Microphones is an installation solution that uses Mogami cable and an ultra slim XLR housing. Most of the connector will be locked and hidden in the microphone itself.
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
1m Muco 4 x XLR f / 4 x XLR
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
Black, balanced stereo microphone cable (ZNK 4/6-STARQUAD) with female XLR NC5FXX-BAG to male XLR NC5MXX-BAG, the boots are black.
Low damping coaxial cable with BNC connector, 50 Ohm, 20m
The rear compatibility of opticalCON MTP 24 chassis fitting with standard MTP 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Kramer's Hydra multi-head cables contain a 15-pin HD (M), 3.5mm (M) & 3 RCA (M) cables. They are designed for applications that require multiple signals in a single jacket.
Black 3-pole cable with 110 Ohms, for AES/EBU or DMX, assembled with 1x REAN XLR female cable connector to a REAN XLR male cable connector, both with gold-plated contacts. The cable comes with transparent shrink tubes on both sides ton enhance individual labelling.
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
20m ZNK 1/4-SIAM with 2xCAP3342/2-4
Speaker cable, black (ZNK 2/9, 2 x 2,5 mm2) with NC3FXX-BAG to NC3MXX-BAG.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
1/4 inch modular Patch Panel for 19 inchrack mount (19 inch x 1U) with a reinforced metal housing.
Speaker cable ZNK 2/9 (2 x 2,5 mm2), black, NP2C-Neutrik-Plug mono on each side
Flap for GT310, SK310, HT3XX,-4XX,-5XX
The angled 19 inch panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30 degree forward-turned and offers 8 D-shape cutouts with M3 threaded fastening holes.
Handtool HTX
The DPA DAD3050 is a MicroDot to mini 1/8" (3.5mm) adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with TOA WM360 and WM4310 bodypack transmitters.
The DPA DAD3056 Adapter simply converts the Microdot connection found on DPA microphones for use with Lectrosonics wireless transmitters with TA5 inputs.
This DPA adapter connector simply converts their proprietary M-DOT microphone connection for use with the Zaxcom TRX900 wireless transmitter / IFB receiver. The adapter will also supply phantom power to the connected microphone.
The DPA DAD6002 is a MicroDot to Coaxial Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sennheiser BF1083-U/BF1053-U.
The DPA DAD6003 is a MicroDot to 3-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sennheiser SK 50, SK 250, SK 3063 and SK 5012 wireless transmitters.
The DPA DAD6010 is simply an adapter that features the DPA standard Microdot connection and a Switchcraft TA4-female connection. The adapter is designed for connecting DPA microphones to transmitters and power supplies featuring TA4-male connections.
The DPA DAD6017 is a MicroDot to Switchcraft TA3-female connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the AKG PT 60, 80, 81, 400, 4000, Samson UT1L and VT2L transmitters.
The DPA DAD6019 is a MicroDot to 1/8" mini connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony Freedom WRT-805 transmitter.
This DPA Adapter converts a Microdot connection to a TA5-female for adapting DPA Miniature Microphones with wireless transmitters featuring TA5-male inputs. For normal sound pressure level operation only (0 dB attenuation).
The DPA DAD6030 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Telex / Electro-Voice RE-1 series.
The DPA DAD6032 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Beyerdynamic Opus and Mipro ACT series.
The DPA DAD6034 is a MicroDot to locking 1/8" (3.5mm) mini connector. The connector enables direct integration between DPA microphones and belt-pack transmitters featuring locking mini connections such as the Sennheiser Evolution series.
The DAD6035 Audio Ltd. Mini TX Adapter from DPA Microphones features a Microdot connector on one side and a Lemo 4-pin connector on the other. It is used with DPA's series of miniature microphones to make them compatible for use with Audio Ltd. Mini TX wireless transmitters.
The white MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other
The DAO4017-R from DPA is a replacement XLR microphone cable designed to fit a DPA 4017 shotgun microphone (sold separately) when using the RWK4017 windshield kit (sold separately). The cable length is 6".
The black MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
RF cable low loss N, 10m
18" Hirose to Low-Profile right angle TA4F, DC powering cable, for Sound Devices Scorpio, 888, 833, Pin-4 (+), Pin-1 (-)
18" Hirose to to TA4F, DC powering cable, for Sound Devices Scorpio, 888, 833, Pin-4 (+), Pin-1 (-)
These Premium instrument cables were assembled with ZNKP 1/7 MKII black and with NP2X-B to NP2X-AU-SILENT. The boots are available in black.
10m extension coax cable with SMA male connectors
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
24" Hirose to single right angle locking DC powering cable
Lemo 6-Pin /SONY Connector
Usually ships within 4 weeks
Kramers MGMA series are micro sized high-performance cables for computer graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both ends.
A black balanced microphone cable (ZNK 2/6-Schwarz) assembled with XLR convertCON NC3FM-C connector on each side. The boots are black.
SMC9-4P/XLR-3-11-C Cable for all WL-800-Serie and DWX-Serie transmitter
Hand tool HTXP
Speaker cable ZNK 2/10 (2x4 mm2) black, speakON NL4FX on each side.
Fiche male M25 Reduced
Fiche male M25 Oversize
This balanced stereo microphone cable is assembled with ZNK 2/6-black and has NP3X-BAG plug on each side. The boots are black.
Antenna Cable for SpeechLine Digital Wireless Receiver, 10m
Black, balanced Premium microphone cable (ZNKP 2/7, 2 x 0.5 mm2, Swissflex) with 3-pole XLR female cable connector NC3FXX-B to XLR male cable connector NC3MXX-B, both with gold-plated contacts and black bushings.
Black 3-pole cable with 110 Ohms, for AES/EBU or DMX, assembled with 1x REAN XLR female cable connector to a REAN XLR male cable connector, both with gold-plated contacts. The cable comes with transparent shrink tubes on both sides ton enhance individual labelling.
Black patch cable assembled with 2x mini plugs 3.5 mm 3pole (NYS231BG).
These stereo cables were assembled with the black ZNK 1/4-SIAM and Neutrik's NP2X-BAG twice on each side.
These Premium instrument cables were assembled with ZNKP 1/7 MKII and with NP2X-B to NP2RX-B. The boots are available in black.
Kramers GMA series are high-performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations that require an audio signal as well.
These Premium instrument cables were assembled with the ZNKP 1/7 MKII cable and with NP2X-B to NP2X-B. The boots are available in black.
Speaker cable ZNK 2/9 (2 x 2,5 mm2) black, Speakon NL4FX on each side
This balanced microphone cable is assembled with NC3MXX-BAG to NP3X-BAG. The boots are black.
The angled 19 inch panel for racks in demanding environments protects the installed receptacles well against the ingress of dirt and water. The panel is 30 degree forward-turned and offers 12 D-shape cutouts with M3 threaded fastening holes.
Ideal cable to to connecto Notebooks, MP3-players or smartphones to an existing sound system or mixing console. Black instrument cable ZNK 1/4-SIAM assembled with a 3 pole Mini-Plug stereo 3.5 mm NYS231BG-LL to 2 x Phono (RCA) NF2CL/2.
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
Copper cable with short coiled part for minimum structure born noise, XLR 4 female connector
Copper cable with short coiled part for minimum structure born noise, XLR 5 connector
These balanced siam cables are assembled with two NP3X-BAG Plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
15m ZNK 1/4-SIAM with 2 x CAP3342/2-4
24" Low-Profile LPXLR-3F to LPS TA3F cable, Red Caps
24" Low-Profile LPXLR-3F to LPS TA3F cable, Blue Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Red Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Black Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Green Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Blue Caps
18" Low-Profile XLR 3-pin cable, Multi-position side cable-exit connectors, XLR-F to XLR-M
24" Low-Profile LPXLR-3F to LPS TA3F cable, Black Caps
24" Low-Profile LPXLR-3F to LPS TA3F cable, Green Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Red Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Black Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Green Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Blue Caps
10Ft premium microphone cable - Canare L4E6S cable - Neutrik XX Series XLR 3-pin connectors - Black - gold pins
24 inches XLR-3F to TA5F cable for balanced MIC level signals into Lectrosonics Legacy or Servo-Bias input transmitters
24 inches XLR-3F to TA5F cable for balanced LINE level signals into Lectrosonics Legacy or Servo-Bias input transmitters
Speaker cable ZNK 2/9 (2 x 2,5 mm2), black, NP2C-Neutrik-Plug mono on each side
SONY Microphone Cable 3-Pol XLR female to 5-Pol XLR male
This balanced microphone cable is assembled with a male XLR NC3MXX-BAG to a REAN mini-plug NYS231BG. The cable and boots are black.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Black speaker cables (ZNK 2/9, 2 x 2.5 mm2) with 2-pole, right-angled 6.35 mm Neutrik phone plugs NP2RX-BAG on both sides, with nickel-plated contacts.
Connecting cable for DT 190 and DT 290 series with 5-pin XLR male, 1.5m length.
Connection cable with 3 pin XLRm and 6.3mm stereo jack plug, 3.0m for: DT280 / DT287 / DT290 / DT297 / DT190 / DT291
Round panel flange for D-Series
1m audio cable with ALEXA Mini LF 6-pin audio connector on one end and open leads at the other.
Dual audio input adapter cable with a single 5 pin male XLR to dual 3 pin female XLR connectors, 50 cm / 1.6 inches
Dual audio output adapter cable with a single 5 pin female XLR to dual 3 pin male XLR connectors, 50 cm / 1.6 inches
These black stereo cables are assembled with the ZNK 1/4-Siam and the original connectors, 2x NP2X-BAG mono plugs to 2x right-angled NP2RX-BAG mono plugs.
Hirose 4-pin Connector
Usually ships within 4 weeks
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
18" Low-Profile LPS TA3F to TA3F cable, Black Caps
18" Low-Profile LPS TA3F to TA3F cable, Red Caps
18" Low-Profile LPS TA3F to TA3F cable, Yellow Caps
18" Low-Profile LPS TA3F to TA3F cable, Green Caps
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
10m ZNK 1/4-SIAM with 2xCAP3342/2-4
Black, balanced stereo microphone cable (ZNK 4/6-STARQUAD) with female XLR NC5FXX-BAG to male XLR NC5MXX-BAG, the boots are black.
Kramer's Hydra multi-head cables contain a 15-pin HD (M), 3.5mm (M) & 3 RCA (M) cables. They are designed for applications that require multiple signals in a single jacket.
Designed for use with small and medium Cyclone windshields, this 10.2" Rycote 3-Pin XLR Male to Right-Angled 3-Pin XLR Female Cable allows you to use these windshield models with a wide range of shotgun microphones.
Usually ships within 4 to 5 weeks
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
Black, unbalanced Premium microphone cable (ZNK 2/7, Swissflex Premium) with 3-pole XLR female cable connector NC3FXX-B (gold-plated contacts) to 2-pole plug NP2X-B (gold-plated contacts), both with black bushings.
Black, balanced Premium microphone cable (ZNKP 2/7, 2 x 0.5 mm2, Swissflex) with 3-pole XLR female cable connector NC3FXX-B to XLR male cable connector NC3MXX-B, both with gold-plated contacts and black bushings.
The black MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
The white MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
Black stereo phono-plug cable assembled with 2x phono to 2x plug. One channels is marked red.
RF cable low loss N, 5m
5m extension coax cable with SMA male connectors
Black balanced microphone cable (ZNK 2/6D) with double shield and special EMC connector for ideal protection against high frequency interferences, assembled with XLR female NC3FXX-EMC to male NC3MXX-EMC.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
Hand tool to hold the barrel of the PX series while the boot is tightened. With the HTXP the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
Black 3-pole cable with 110 Ohms, for AES/EBU or DMX, assembled with 1x REAN XLR female cable connector to a REAN XLR male cable connector, both with gold-plated contacts. The cable comes with transparent shrink tubes on both sides ton enhance individual labelling.
These Premium instrument cables were assembled with ZNKP 1/7 MKII black and with NP2X-B to NP2X-AU-SILENT. The boots are available in black.
These balanced siam cables are assembled with two NP3X-BAG Plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
Connection cable with 4 pin XLRf (Riedel / ASL Intercom), 1.5m for: DT280 / DT287 / DT290 / DT297 / DT190 / DT291
Audio Cord, XLR3 (F) - XLR3 (M), Neutrik Blk - 25m
Cover plate for cable reel KTGT310.OF with 8x cut-outs for D-series chassis connectors and one cut-out for multipin connectors with 13 to 19 pins.
Ideal cable to to connecto Notebooks, MP3-players or smartphones to an existing sound system or mixing console. Black instrument cable ZNK 1/4-SIAM assembled with a 3 pole Mini-Plug stereo 3.5 mm NYS231BG-LL to 2 x Phono (RCA) NF2CL/2.
Speaker cable, black (ZNK 2/9, 2 x 2,5 mm2) with NC3FXX-BAG to NC3MXX-BAG.
Kramers GMA series are high-performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations that require an audio signal as well.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
A funny phono cable in a retro look. This cable has a black-grey stain-resistant synthetical coating. It is assembled with a couple of phono connectors CAP3342/2-6 on both sides.
Stereo cable assembled with 2x phono plugs (RCA) on each side, with gold-plated contacts (ex RCC*CC).
Black stereo phono-plug cable assembled with 2x phono to 2x plug. One channels is marked red.
Black stereo cable ZNK 1/4-SIAM assembled with 2 x phono plugs CAP3342/2-4 with gold-plated lamellar contacts to 2 x Neutrik XLR female cable connectors NC3FXX with silver-plated contacts. One channel has a red marking for better stereo differentiation.
Kramers MGMA series are micro sized high-performance cables for computer graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both ends.
These black stereo cables are assembled with the ZNK 1/4-Siam and the original connectors, 2x NP2X-BAG mono plugs to 2x right-angled NP2RX-BAG mono plugs.
Black stereo cable ZNK 1/4-SIAM, assembled with 2 x phono plugs CAP3342/2-4 with gold-plated contacts to 2 x Neutrik XLR male cable connectors NC3MXX with silver-plated contacts. In each case one channel has a red marking for better stereo differentiation.
C-IN Cable
Detachable twisted pair cable for excellent resistance against structure born noise. Made for IE 400 PRO and IE 500 PRO.
Cable II-8, copper cable with short coiled part for minimum structure born noise, unterminated ends
Low damping coaxial cable with BNC connector, 50 Ohm, 10m
Felxible short cables for TM2 (A2DC), (Pair)
Usually ships within 4 weeks
Black microphone monosplit cable, made of a bantam cable (ZNK 2/4-BL, Swissflex, 2x0.22 mm2), assembled with one 3 pole XLR female cable connector (NC3FXX) with a white bushing, transparent labeling ring and with silver-plated contacts to a 3 pole mini plug 3.5 mm (NTP3RC), with nickel-plated contacts. Both connectors have a nickel housing.
Heavy-duty, miniature microphone cable, 2.2 mm diameter, MicroDot connector, 5m.
The white MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
These balanced siam cables are assembled with two NP3X-BAG plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
This balanced stereo microphone cable is assembled with ZNK 2/6-black and has NP3X-BAG plug on each side. The boots are black
Cover plate 8xD-cutout / GT450
Speaker cable ZNK 2/9 (2 x 2,5 mm2) black, Speakon NL4FX on each side
This balanced microphone cable (ZNK 2/6-BL) is assembled with NC3FXX-BAG to NC3MXX-BAG. The available boots are yellow.
3m extension coax cable with SMA male connectors
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
This balanced microphone cable is assembled with NC3FXX-BAG to NP3X-BAG. The cable and boots are black.
Speaker cable ZNK 2/9 (2x2.5 mm2) black, NP2C-Plug mono to Speakon NL4FX.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
This balanced microphone cable is assembled with NC3MXX-BAG to NP3X-BAG. The boots are black.
These stereo cables were assembled with the black ZNK 1/4-SIAM and Neutrik's NP2X-BAG twice on each side.
Black speaker cable (ZNK CT2988800, 2 x 1.5 mm2) with 2-pole 6.35 mm phone plugs (NP2X-BAG) on both sides, with nickel-plated contacts.
Speaker cable ZNK 2/9 (2 x 2,5 mm2), black, NP2C-Neutrik-Plug mono on each side
These Premium instrument cables were assembled with ZNKP 1/7 MKII and with NP2X-B to NP2RX-B. The boots are available in black.
This balanced microphone cable is assembled with a male XLR NC3MXX-BAG to a REAN mini-plug NYS231BG. The cable and boots are black.
These Premium instrument cables were assembled with the ZNKP 1/7 MKII cable and with NP2X-B to NP2X-B. The boots are available in black.
These Premium instrument cables were assembled with ZNKP 1/7 MKII black and with NP2X-B to NP2X-AU-SILENT. The boots are available in black.
Black, balanced stereo microphone cable (ZNK 4/6-STARQUAD) with female XLR NC5FXX-BAG to male XLR NC5MXX-BAG, the boots are black.
Female XLR cable end 110 Ohm input - female BNC 75 Ohm output. Interface balanced and coaxial lines.
Female BNC 75 Ohm input - male XLR cable end 110 Ohm output. Interface balanced and coaxial lines.
Stereo cable assembled with 2x phono plugs (RCA) on each side, with gold-plated contacts (ex RCC*CC).
Black patch cable assembled with 2x mini plugs 3.5 mm 3pole (NYS231BG).
Black, unbalanced Premium microphone cable (ZNK 2/7, Swissflex Premium) with 3-pole XLR female cable connector NC3FXX-B (gold-plated contacts) to 2-pole plug NP2X-B (gold-plated contacts), both with black bushings.