P-Tap to 3-pin XLR cable
3 pieces in stock
LS 600 Series 5-Pin Weatherproof Head Cable (7.5m) - not for LS 600C
4 pieces in stock
USB-C to 5-Pin DMX KIT
3 pieces in stock
10m DMX cable with male and female XLR-5 connectors
2 pieces in stock
5 Pin Male-to-Female XLR Head Cable (3m)
1 pieces in stock
Extension Cable (5m / 16ft) for ALL-IN-Series
5 pieces in stock
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
12 pieces in stock
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
10 pieces in stock
Flexlite D-tab cable ( 70cm / 2,2ft )
1 pieces in stock
The SC15 is a high-quality, 300mm-long Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. It is particularly suitable for connecting the VideoMic NTG to Apple mobile devices with a Lightning port and features a junction box for cable management. This cable will not charge or sync your iOS...
6 pieces in stock
FLYBOX 630 is a tri-phase power distributor with 63 A housed into a 10 HU 19" rack, giving a professional supply distribution system perfectly protected and with a total control over its many outputs.Its high quality components and oversized wiring, ensure a really reliable devices supply.
This black DMX light control cable (Pat 512, 2 x 2 x 0.32 mm2) features an FRNC jacket as well as a foil and braided shield. The outer diameter measures 5.8 mm. DMX cables (DMX stands for Digital Multiplex) are commonly used for stage and event applications (lighting) for the control of effect processors. This cable is suitable for fixed installations.
Its AC power input can be set for every AC power in the world from 110 V to 240 V in 6 steps.
Delivery time of 4 to 6 weeks
Power Distribution Box for 400A-green
Usually ships within 12 weeks
Power Distribution Box for 400A-blue
Usually ships within 12 weeks
Power Distribution Box for 400A-black
Usually ships within 12 weeks
Power Distribution Box for 400A-white
Usually ships within 12 weeks
Power Distribution Box for 400A-red
Usually ships within 12 weeks
Power Distribution Box for 400A- Gray
Usually ships within 12 weeks
Power Distribution Box for 400A-brown
Usually ships within 12 weeks
19 poles 10 m. Long Extension Cable
Usually ships within 2 to 3 months
Spectrum PDX Cable, 50 ft.
Profoto has improved this 32.8' Extension Cable for ProHead for extra safety
32A Power Distribution Box
Usually ships within 12 weeks
19 poles 5 m. Long Extension Cable
Usually ships within 2 to 3 months
Tubing / Sleeving, Teflon, 18 AWG for Bussing, 100' Roll
Profoto has improved this 16.4' Extension Cable for ProHead for extra safety. Compatible with select ProHeads, this cable has an upgraded design with a new male connector plug and female connector socket.
DC Cable 10 m (4-Pin 30A) S360-C
Spectrum PDX Cable, 25 ft.
E-TRACK Mains/DMX Black Track 4 mt. Long 7-conductor surface track for three circuits plus data bus, black color
Usually ships within 2 to 3 months
15 meters connecting cable (Evoke 1200)
12 meters connection cable for Evoke
Power Distribution 32a Cee in & 16a Schuko X 6pcs Out
Usually ships within 12 weeks
Power Distribution 32A CEE in & 16A CEE X 6pcs Out
Usually ships within 12 weeks
DMX Cable are commonly used as stage control systems in Broadcasting (lighting) or for control of effect processors. DMX stands for "Digital Multiplex". This DMX Light Control Cable (Pat 512, 2 x 2 x 0.32 mm2) is black and therefore well-suited to be installed in theatres or concert halls. The jacket is made of DMC Flex PVC and is braid-and foil shielded.
Cable - light head to ballast - 7m (23 )
Delivery time of 4 to 6 weeks
Cable, light head to ballast, 7 m (23')
Delivery time of 4 to 6 weeks
Arri 12/18k Panel Mount Female
Usually ships within 12 weeks
This 49.2' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 15 m to Titan Tube Powerbox, set of 8 pieces.
Arri 6k Panel Mount Female
Usually ships within 12 weeks
Cable, light head to power supply, 10m for DLED7N-C
Delivery time of 4 to 6 weeks
Arri 12/18k Line Female
Usually ships within 12 weeks
E-TRACK Mains Black Track 4m. Long 5-conductor surface track for three circuits, black color
Usually ships within 2 to 3 months
E-TRACK Mains/DMX Black Track 3 mt. Long 7-conductor surface track for three circuits plus data bus, black color
Usually ships within 2 to 3 months
3 Phase Y Splitter, Fan Out to 3 Phase, Parallel Wired With 32A CEE Connector
Usually ships within 12 weeks
10 meters connecting cable (Evoke 1200)
FreeStyle/4 Extension, 25ft
Delivery time of 4 to 6 weeks
5c Cable Guard
Usually ships within 12 weeks
Arri 12/18k Line Male Including Skintop
Usually ships within 12 weeks
Arri 6k Line Female Including Skintop
Usually ships within 12 weeks
cPot cable F-F 25mm2 50m
Cable - light head to ballast - 7 m (23 )
Delivery time of 4 to 6 weeks
Arri 6k Line Male Including Skintop
Usually ships within 12 weeks
DC Cable 5 m (4-Pin 30A) S360-C
4c Cable Guard
Usually ships within 12 weeks
This 32.8' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 10 m to Titan Tube Powerbox, set of 8 pieces.
Cable, light head to power supply, 3m for DLED7N-C
Delivery time of 4 to 6 weeks
E-TRACK Mains Black Track 3m. Long 5-conductor surface track for three circuits, black color
Usually ships within 2 to 3 months
Cable - light head to power supply - 8 m (26.2 )
Delivery time of 4 to 6 weeks
3 Phase Y Splitter to 3 Single Phase Parallel Wired With 16A CEE Connector
Usually ships within 12 weeks
Forza 8 Pin DC Connection Cable 12M
Usually ships within 3 to 6 weeks
E-TRACK Mains/DMX Black Track 2m. Long 7-conductor surface track for three circuits plus data bus, black color
Usually ships within 2 to 3 months
Canon's 80cm OC-E4A Multifunction Hot Shoe Cable allows photographers to remotely trigger Canon flashes. Removing the flash from the camera's hot shoe allows for unique and dramatic lighting styles not possible with a traditional hot shoe. Off-camera lighting reduces the harsh shadows often associated with on-camera flashes and gives photos a more natural...
Usually ships within 2 weeks
Extension Cable for 4-Bank Fixture - 25.
Delivery time of 4 to 6 weeks
The cable crossover is built to protect cables from moisture, oils, solvents, and frame as a shield for impact resistance and load bearing.
Usually ships within 12 weeks
Litt System cable, 8 wires, color coded 50 meter drum
PL7 Extension, 24 Feet
Power your SkyPanel series fixture by connecting it to a DC source with this 49' 3-Pin XLR DC Power Cable from Arri.
The Rotolight Titan X2 DC Cable measures 16.4' and connects the X2 to its power supply.
Usually ships within 2 to 3 weeks
PL7 TwoFer
Forza 8 Pin DC Connection Cable 7.5M
Usually ships within 3 to 6 weeks
CONTRIK cPot CP-X25-030
Y Spiltter With One 32A CEE Male Connector, and 2 X 32A
Usually ships within 12 weeks
Cable, light head to ballast, 7 m (23')
Delivery time of 4 to 6 weeks
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
cPot cable F-F 25mm2 25m
E-TRACK Mains Black Track 2m. Long 5-conductor surface track for three circuits, black color
Usually ships within 2 to 3 months
575w/1.2k Line Male W/locking Ring W/pg29 Cable Gland (for Other Brand)
Usually ships within 12 weeks
Arri 575w/1.2k Line Male W/locking Ring W/pg29 Calbe Gland
Usually ships within 12 weeks
Arri 2.5/4k Line Male W/locking Ring W/pg29 Cable Gland
Usually ships within 12 weeks
575w/1.2k Line Female W/pg29 Cable Gland (for Other Brand)
Usually ships within 12 weeks
Arri 575w/1.2k Line Female W/pg29 Cable Gland
Usually ships within 12 weeks
The Kupo 2.5KW/4KW HMI power connector (Line Female) is made of durable aluminum alloy. It is specifically designed for professional HMI lighting fixtures and stabilizer power cords in the film industry.
Usually ships within 12 weeks
Forza 5M Connector Cable
Usually ships within 3 to 6 weeks
Extension cable 6-pin XLR, 10m
Delivery time of 4 to 6 weeks
Breakout cable to AX2 Case Powercon True1 to 4 x Powercon True1
This Rotolight DC to DC Cable is an extension cable for a Rotolight Titan X2 to a mains power cable. It measures 4.1' in length.
Usually ships within 2 to 3 weeks
The 4' Speakon to Hirose DC Cable from Rotolight allows the ARRI Alexa camera to be powered by the Rotolight Titan 2/4 Battery Adapter.
Usually ships within 2 to 3 weeks
The 4' Speakon to 4-Pin XLR DC Cable from Rotolight allows the ARRI S30 and S60 Skypanels to be powered via the Rotolight 2/4 Battery Adapter.
Usually ships within 2 to 3 weeks
Cable - light head to power supply - 2 m (6.6 )
Delivery time of 4 to 6 weeks
Cable - light head to ballast - 7 m (23 )
Delivery time of 4 to 6 weeks
Y-splitters, Length 100cm Input: Three-phase (5x4.0mm)
Usually ships within 12 weeks
Cable for Control Panel, 15 m
The 9.8' Titan X2 AC Mains Cable from Rotolight provides power to the X2 fixture. The cable has a Swiss Plug similar to a Euro plug but with a third round connection pin.
Usually ships within 2 to 3 weeks
PL7 Breakout TwoFer
cPot cable F-F 16mm2 25m
Power your SkyPanel series fixture by connecting it to a DC source with this 33' 3-Pin XLR DC Power Cable from Arri.
Cable, light head to power supply, 10m for DLED neo light heads
Delivery time of 4 to 6 weeks
This 16.4' Titan Extension Cable 8-Pack from Astera allows connection of eight Titan tubes to the PowerBox for charging and data connection.
Connection cable 5 m to Titan Tube Powerbox, set of 8 pieces.
This Rotolight DC to DC Cable is an extension cable for a Rotolight Titan X2 to a mains power cable. It measures 1.64' in length.
Usually ships within 2 to 3 weeks
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
cPot cable F-F 16mm2 20m
Arri 2.5/4k Panel Mount Male W/locking Ring
Usually ships within 12 weeks
3 Phase Y Splitter, Fan-out to 3 Single Phase
Usually ships within 12 weeks
Arri 575w/1.2k Panel Mount Male W/locking Ring
Usually ships within 12 weeks
PL7 Extension, 12 Feet
SPIDER male cable connector with crimping contacts. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67...
SPIDER male cable connector with solder pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for...
LS 600c Pro 7-Pin Weatherproof Head Cable (7.5m)
SPIDER female cable connector with crimping contacts. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67...
SPIDER female cable connector with solder pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary...
Y Splitter W/ 2.5mm 3C Cable in Parallel Wired
Usually ships within 12 weeks
PowerCON TRUE 1: 16A DAISY CHAIN CABLE 5 mt. (16') LONG, including: 5 mt. (16') power cable Terminated with with an IN-LINE PowerCON TRUE 1 Connector mod. NAC3FX-W and IN-LINE PowerCON TRUE 1 Connector mod. NAC3MX-W cable on the other end , to allow daisy chain of LIGHTING FIXTURES for a total maximum 16A for the all line
Usually ships within 2 to 3 months
Grooved Protective Cable Gland
Y Spilitter W/ 2.5mm 3C Cable in Series Wired
Usually ships within 12 weeks
Punch unit with round cutting die and an outer hole diameter of 23.8 mm for sheet steel with a thickness of max. 2 mm. Suitable for Neutrik powerCON connectors NAC3FPX(-ST). Tension bolt: 9.5 mm; insert hole: 12.7 mm.
Cable Connectors for cables with diameter from 15 - 23 mm
cPot cable F-F 16mm2 15m
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Female Cable Connectors for cables with diameter from 15 - 23 mm
Battery cable from 28V DC battery (3pin XLR) to LEDRAMA LED panels (Neutrik SpeakON).
Delivery time of 4 to 6 weeks
cPot cable F-F 25mm2 10m
575w/1.2k Panel Mount Female (for Other Brand)
Usually ships within 12 weeks
Arri 2.5/4k Panel Mount Female
Usually ships within 12 weeks
Arri 575w/1.2k Panel Mount Female
Usually ships within 12 weeks
PowerCON TRUE 1: 16A MAINS CABLE 10 mt. (33') LONG including: 10 mt. (33') detachable power cable Terminated at one end with an IN-LINE PowerCON TRUE 1 Connector mod. NAC3FX-W and free cable on the other end
Usually ships within 2 to 3 months
PowerCON TRUE 1: 16A DAISY CHAIN CABLE 3 mt. (10') LONG, including: 3 mt. (10') power cable Terminated with with an IN-LINE PowerCON TRUE 1 Connector mod. NAC3FX-W and IN-LINE PowerCON TRUE 1 Connector mod. NAC3MX-W cable on the other end , to allow daisy chain of LIGHTING FIXTURES for a total maximum 16A for the all line
Usually ships within 2 to 3 months
cPot med patchcord FF 6mm2, 5m
DMX Cable 5-Pin XLR, 25ft
Delivery time of 4 to 6 weeks
SPIDER male cable connector without pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for the...
Forza 2.5M Connector Cable
Usually ships within 3 to 6 weeks
Extension cable 6-pin XLR, 3m
Delivery time of 4 to 6 weeks
RJ45 DMX Cable, 100 ft. (CAT6)
E-TRACK Mains Black Track 1m. Long 5-conductor surface track for three circuits, black color
Usually ships within 2 to 3 months
cPot med patchcord FF 6mm2, 4m
Female Cable Connectors for cables with diameter from 19 - 28 mm
Female Cable Connectors for cables with diameters from 22 - 32 mm
Female Cable Connectors for cables with diameters from 15 - 23 mm
Female Cable Connectors for cables with diameters from 19 - 28 mm
Female Cable Connectors for cables with diameter from 22 - 32 mm
cPot cable F-F 16mm2 10m
PavoSlim DC Connection Cable 7.5M
Usually ships within 3 to 6 weeks
575w/1.2k Panel Mount Male W/locking Ring (for Other Brand)
Usually ships within 12 weeks
Connection Cable 8M for WC-LM6P-C1 6 Pin Wired Controller
DMX cable - 10 m (32.8 )
Delivery time of 4 to 6 weeks
Cable for Control Panel, 5 m
Mains cable S360-C, 3 m, powerCON 32A / Bare Ends
Mains cable S360-C, 3 m, powerCON 32A / Japanese
Mains cable S360-C, 3 m, powerCON 32A / Chinese
Mains cable S360-C, 3 m, powerCON 32A / Edison
Mains cable S360-C, 3 m, powerCON 32A / Schuko
cPot med patchcord FF 6mm2, 3m
Astera AX2 JumpCable
Cable Connectors for cables with diameter from 19 - 28 mm
Male Cable Connectors for cables with diameter from 19 - 28 mm
Male Cable Connectors for cables with diameter from 22 - 32 mm
Male Cable Connectors for cables with diameter from 15 - 23 mm
PowerCON TRUE 1: 16A MAINS CABLE 5 mt. (16') LONG including: 5 mt. (16') detachable power cable Terminated at one end with an IN-LINE PowerCON TRUE 1 Connector mod. NAC3FX-W and free cable on the other end
Usually ships within 2 to 3 months
POWERCON 20A MAINS CABLE 10 mt. (33') LONG, including: 10 mt. (33') power cable Terminated at one end with an IN-LINE POWERCON Connector and free cable on the other end
Usually ships within 2 to 3 months
RJ45 DMX Cable, 75 ft. (CAT6)
Line connector source with innovative ergonomic hand grips for easy handling and with finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. There are no special tools required for assembling.
Line Source Phase 2 black / 50 mm2
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Innovative and ergonomic hand grips for easy handling (Drain line). With finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. No special tools are required for assembling
Line Drain Phase 1 brown / 50 mm2
Line connector source with innovative ergonomic hand grips for easy handling and with finger protection IP2X to prevent accidental touching of live contact parts. Contact to housing retention through flame-retardant UL94-VO plastic cotter pin. There are no special tools required for assembling.
DMX Cable 5-Pin XLR, 15ft
Delivery time of 4 to 6 weeks
With this cable you can remotely release your camera from up to 300 meters/1000 ft with the Profoto Air Remote. The cable has a pre-release switch that can be switched on to keep the camera autofocus continuously active.
PowerCON TRUE 1: 16A MAINS CABLE 3 mt. (10') LONG including: 3 mt. (10') detachable power cable Terminated at one end with an IN-LINE PowerCON TRUE 1 Connector mod. NAC3FX-W and free cable on the other end
Usually ships within 2 to 3 months
cPot med patchcord FF 6mm2, 2m
POWERCON 20A DAISY CHAIN CABLE 5 mt. (16') LONG, including: 5 mt. (16') power cable Terminated with POWERCON Connectors at the ends, to allow daisy chain of LIGHTING FIXTURES for a total maximum 20A for the all line
Usually ships within 2 to 3 months
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
RJ45 DMX Cable, 50 ft. (CAT6)
cPot cable F-F 16mm2 5m
Phoenix-5 Extension, RGBW, 12 ft.
DMX DAISY CHAIN CABLE 5 mt. (16') LONG, including: 5 mt. (16') cable terminated with XLR 5 pin Connectors (male and female) at the ends, to allow daisy chain of DMX fixtures
Usually ships within 2 to 3 months
MOSAIC Basic Cable (3m / 9.8ft)
This SP-XC10H8 Extension Cable of Falcon Eyes is 10 meter long and made for the LED lights from Falcon Eyes.
Usually ships within 2 to 4 weeks
DMX data cable, 10 m (XLR 5)
For powering a Dedolight DLH4 light head with 12 V lamp from automobile cigarette lighter.
Delivery time of 4 to 6 weeks
The Profoto Power Cable for Pro-10, Pro-8, Pro-7, and D4 Power Packs is a 16' C19 cable that provides mains current to the power packs. It has a plug that's designed for use in Switzerland.
cPot med patchcord FF 6mm2, 1m
Y Spilitter W/ 2.5mm 3C Cable in Series Wired
Usually ships within 12 weeks
SPIDER female cable connector without pins. This is an alternative version of the SSX 19 pin standard, studied to get simple managing of the break-ins and break-outs operations. The special 6 ways rubber insert, fitted in the cable gland terminal, offers the opportunity to get an optimal cables retention and a perfect watertight seal IP67 necessary for...
20 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish. The insert stack is neoprene rubber, thereby allowing removable contacts in solder...
POWERCON 20A DAISY CHAIN CABLE 3 mt. (10') LONG, including: 3 mt. (10') power cable Terminated with POWERCON Connectors at the ends, to allow daisy chain of LIGHTING FIXTURES for a total maximum 20A for the all line
Usually ships within 2 to 3 months
Daisy Chain Cable, 3 m, powerCON TRUE1/UL
Mains Cable, 3 m, powerCon TRUE1/Japan, with line switch
Power your SkyPanel series fixture by connecting it to a DC source with this 10' 3-Pin XLR DC Power Cable from Arri.
Mains cable, 7 m, powerCON TRUE1/Edison, with line switch
Mains cable, 3 m, powerCON TRUE1/Schuko, with line switch
Mains cable, 3 m, powerCON TRUE1 / Chinese, with line switch
Mains cable, 3 m, powerCON TRUE1 TOP Bare Ends, with line switch
Cable, light head to power supply, 3m for DLED neo light heads
Delivery time of 4 to 6 weeks
cPot med con F cable 6mm2, 5m
Phoenix-5 Hybrid, Female to Two Phoenix-3 Male
cPot med patchcord FF 6mm2, 05m
Female panel mount connector with gold crimp contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish. The insert stack is neoprene rubber, thereby allowing removable contacts in solder...
cPot cable F-F 16mm2 2m
DMX cable - 3 m (9.8 )
Delivery time of 4 to 6 weeks
DMX DAISY CHAIN CABLE 3 mt. (10') LONG, including: 3 mt. (10') cable terminated with XLR 5 pin Connectors (male and female) at the ends, to allow daisy chain of DMX fixtures
Usually ships within 2 to 3 months
POWERCON 20A MAINS CABLE 5 mt. (16') LONG, including: 5 mt. (16') power cable Terminated at one end with an IN-LINE POWERCON Connector and free cable on the other end
Usually ships within 2 to 3 months
cPot coupler MM
This SP-XC10HA-7 Extension cable from Falcon Eyes is 10 meters long and is made for the Desal series.
Usually ships within 2 to 4 weeks
Falcon Eyes Extension Cable SP-XC10T 10m for RX-TDX
Usually ships within 2 to 4 weeks
cPot cable F-F 16mm2 1m
RJ45 DMX Cable, 25 ft. (CAT6)
POWERCON 20A MAINS CABLE 3 mt. (10') LONG, including: 3 mt. (10') power cable Terminated at one end with an IN-LINE POWERCON Connector and free cable on the other end
Usually ships within 2 to 3 months
DMX DAISY CHAIN CABLE 2 mt. (6') LONG, including: 2 mt. (10') cable terminated with XLR 5 pin Connectors (male and female) at the ends, to allow daisy chain of DMX fixtures
Usually ships within 2 to 3 months
Cable/extension - light head to power supply - 8 m (26.2 )
Delivery time of 4 to 6 weeks
cPot med con F cable 6mm2, 4m
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Extension Cable (5m / 16ft) for BI-FLEX M3, M7
Extension Cable for FB2035 (5m / 16ft)
Extension Cable (5m / 16ft) for FABRIC-LITE 35
DMX data cable, 5 m (XLR 5)
Phoenix-5 Extension, RGBW, 6 ft.
15 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
Linear Junction for E-TRACK Mains/DMX Black. Straight coupler
Usually ships within 2 to 3 months
End feed right black for E-TRACK Mains/DMX Black
Usually ships within 2 to 3 months
Cable Connectors for cables with diameter from 15 to 23 mm
Cable Connectors for cables with diameter from 22 to 32 mm
Cable Connectors for cables with diameter from 19 - 28 mm
Extension cable 4pin, 10m, for DLR-MCB
Cable, light head to power supply, 1.3m for DLED neo light heads
Delivery time of 4 to 6 weeks
Daisy Chain Cable, 3 m, powerCON TRUE1/Japan
Daisy Chain Cable, 3 m, powerCON TRUE1/CE
Chroma RGBX LiteRibbon Adapter, LiteDimmer Pocket
Basic Cable (3m / 9.8ft) for ALL-IN-Series
F22x 9 pin connecting cable
Phoenix-3 Extension Cable, Hybrid, Black, 24 ft., (Round)
Panel mount connector with gold-plated crimp contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
cPot med con F cable 6mm2, 3m
20 m 3x1.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
DMX data cable, 2,5 m (XLR 5)
This is a 24.6-foot (7.5m) head cable for a PavoSlim LED panel light. It's nearly 200% longer than the 8.5-foot (2.6m) cable that comes with PavoSlim panel lights, so it provides much more length to mount the panel high up on stands and to place the Control Unit much further away from the light.
Usually ships within 3 to 6 weeks
D-TAP cable 65 cm - 1.30 m / 25 - 51" with 4-pin XLR connector, coiled. (for DT7/9-(BI-)BAT-AB power supplies)
Delivery time of 4 to 6 weeks
Y Splitter W/ 2.5mm 3C Cable in Parellel Wired
Usually ships within 12 weeks
Cable 65 cm - 1.30 m / 25 - 51inches with 4-pin XLR connector - coiled
Delivery time of 4 to 6 weeks
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
A lockable power cord assembled with powerCON TRUE1 female NAC3FX-W to male NAC3MX-W. The rubber cable has a wire diameter of 3x1.5 mm2. The cable is approved according to VDE and ENEC.
Mains cable, 1.5 m, powerCON TRUE1/bare ends
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX+, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Female Cable Connectors for cables with diameters of 19 to 28 mm
Female Cable Connectors for cables with diameters of 22 to 32 mm
Female Cable Connectors for cables with diameters of 15 to 23 mm
RJ45 DMX Cable, 14 ft. (CAT6)
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Phoenix-3 Extension Cable, Hybrid, Black, 24 ft., (Flat)
Phoenix-5 Hybrid, Female to Two Phoenix-3 Male
Phoenix-3 Extension Cable, Hybrid, Black, 12 ft., (Round)
10 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
Basic Cable (2m / 6ft) for FABRIC-LITE 20 / BI-FLEX 2 / BI-FLEX 4
Basic Cable (2m / 6ft) for FABRIC-LITE 35
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Mains cable, 3 m, powerCON TRUE1/Bare Ends
Mains cable, 3 m, powerCON TRUE 1/Japanese
Mains cable, 3 m, powerCON TRUE1/Chinese
Mains cable, 3 m, powerCON TRUE1/Edison
Mains cable, 3 m, powerCON TRUE1/Schuko
X12-F425 Female Connector Assembly
Delivery time of 4 to 6 weeks
X08-F125 Male Connector Assembly
Delivery time of 4 to 6 weeks
X08-F125 Female Connector Assembly
Delivery time of 4 to 6 weeks
Double Pipe Connector for 1-1/2" Sch. 40 (42.4mm) Pipe
Usually ships within 12 weeks
Double Pipe Connector for 1-1/2" Sch. 40 (48.3mm) Pipe
Usually ships within 12 weeks
X12-F425 Male Connector Assembly
Delivery time of 4 to 6 weeks
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
15 m 3x1.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
cPot med con F cable 6mm2, 2m
Extension Cable (2m / 6ft) for BI-FLEX M7
Black, 5-pole wired DMX light control cable (ZNK CT2955701) with PVC jacket and an outer diameter of 5.7 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connectors, both with silver-plated contacts. Pin configuration: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot); Pin 4 = Data-; Pin 5...
Phoenix-3 Threefer, Female to Three Male
PL7 Male to Bare-End, 16/7 AWG
Phoenix-3 Extension Cable, Hybrid, Black, 6 ft., (Round)
Falcon Eyes Extension Cable SP-XC08 8m for RX-T and LPL Series
Usually ships within 2 to 4 weeks
Mez-tie 2cm X 20cm - Blue (50pcs Per Pack)
Usually ships within 12 weeks
Mez-tie 2cm X 20cm - Yellow (50pcs Per Pack)
Usually ships within 12 weeks
Mez-tie 2cm X 20cm - White (50pcs Per Pack)
Usually ships within 12 weeks
D-TAP power extension cable (AWG16 / 1,5m2) for DLPS36-100 power supply. D-TAP connectors on both ends (male / female) (for DT7/9-(BI-)BAT-AB power supplies)
Delivery time of 4 to 6 weeks
Ball Bungee Dia. 4.5mm/ Length 6''( Black) 50 Pcs/packp
Usually ships within 12 weeks
Mez-tie 2cm X 20cm - Red (50pcs Per Pack)
Usually ships within 12 weeks
Mez-tie 2cm X 20cm - Black (50pcs Per Pack)
Usually ships within 12 weeks
Astera NYX D-Tap splitter cable for FP5
Power your SkyPanel series fixture by connecting it to a DC source with this 3' 3-Pin XLR DC Power Cable from Arri.
Phoenix-3 Hybrid DMX Adapter, Female to Phoenix-5 Male
Phoenix-3 Twofer, Female to Two Male
DMX Cable 5-Pin xlr, 10ft
Delivery time of 4 to 6 weeks
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
PL7 Male to Bare-End, 16/4 AWG
Use this USB Cable for FP5 LED Bulb (8-pack) from Astera to connect an NYX Bulb to a standard PowerBank.
10 m 3x1.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
cPot med con F cable 6mm2, 1m
Cable 55 cm / 22inches with jack ? 2.1 / 5.5 mm for Swit battery
Delivery time of 4 to 6 weeks
The SP-XC06H from Falcon Eyes is a 6-pin extension cable suitable for the Bi-Color LED Sophiez lamps which are equipped with a 6-pin connection, such as the SO-48TD, SO-68TD and SO-108TDX, as well as the RX-318TD Bi-Color LED set.
Usually ships within 2 to 4 weeks
cPot cable R12-F 25mm2 025m
Extension cable 4pin, 3m, for DLR-MCB
32A 5pin Panel Male
Usually ships within 12 weeks
The DMX Adapter Y Cable from Nanlite enables DMX connection to your PavoTube II X Series light using standard male and female 5-pin XLR connectors. It plugs into the 5-Pin Aviation accessory socket of the light, providing in and out 5-pin DMX connections and allowing you to control a series of connected fixtures.
Usually ships within 3 to 6 weeks
For Aputure MT Pro, INFINIBARs, and MC Pro lights.
A lockable power cord assembled with powerCON TRUE1 female NAC3FX-W to male NAC3MX-W. The rubber cable has a wire diameter of 3x1.5 mm2. The cable is approved according to VDE and ENEC.
With this cable you can remotely release your camera from up to 300 meters/1000 ft with the Profoto Air Remote.
CONTRIK cPot CP-X25-R8F-00025
Black DMX adapter cable (ZNK CT2955701) with 3-pole XLR male cable connector to 5-pole XLR female cable connector, 0.3 m length, with PVC jacket and an outer diameter of 5.7 mm. It causes less lever action on the device's connector than usual adapters. This cable is 3 pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal...
5 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
RJ45 DMX Cable, 7 ft. (CAT6)
Shutter Release Cable
Usually ships within 2 to 6 weeks.
Black DMX adapter cable (ZNK CT2955701) with 5-pole XLR male cable connector to 3-pole XLR female cable connector, 0.3 m length, with PVC jacket and an outer diameter of 5.7 mm. It causes less lever action on the device's connector than usual adapters. This cable is 3 pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal...
Safety cable 3 mm with carabine, 80 cm length
Delivery time of 4 to 6 weeks
32A 5pin Connector
Usually ships within 12 weeks
D-tab Cable (1m / 3.2ft) for ALL-IN-Series
The Falcon Eyes Powercon power cable connects various LED lamps with the wall socket. Besides Falcon Eyes lamps, the universal plug is also suitable for equipment from other brands. Thanks to the length of five meters you have a large freedom of movement, both in the studio and on location.
Usually ships within 2 to 4 weeks
cPot med con F cable 6mm2, 05m
TRS (Headphone) to RJ45, 2 ft.
Male panel mount connector without contacts. The SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
D-TAP cable, 1.8 m (6') with cigarette light connector (for DT7/9-(BI-)BAT-AB power supplies)
Delivery time of 4 to 6 weeks
D-TAP Cable with DC socket
Usually ships within 3 to 6 weeks
Phoenix-3 Extension Cable, Hybrid, 3 ft. (Flat)
5 m 3x1.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
Mains connection cable PowerCON True1, H07RN-F 3 x1.5 mm2, 2 m, with molded plug T12
PowerCON True1 power cord, H07RN-F 3 x1.5 mm2, 2 m, with molded plug T12
Phoenix-3 Extension Cable, Hybrid, 12 ft. (Flat)
RJ45 DMX Cable, 3 ft. (CAT6)
2 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
RJ45 DMX Cable, 2 ft. (CAT6)
Power your SkyPanel series fixture by connecting it to a DC source with this 1.6' 3-Pin XLR DC Power Cable from Arri
2 m 3x1.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
Cable XLR to connect Dimmer with Powerbox FBS350BIMDIM to FBS350BIDP
U-LITE
DMX Cable 5-Pin xlr, 5ft
Delivery time of 4 to 6 weeks
1 m 3x2.5 mm2 H07RN powerCON TRUE1 TOP (m) (f) IP65
1.50 m 3x2.5 ''E+F''(m) pC T1(f)
A lockable power cord assembled with powerCON TRUE1 female NAC3FX-W to male NAC3MX-W. The rubber cable has a wire diameter of 3x1.5 mm2. The cable is approved according to VDE and ENEC.
cPot cable R8-M 25mm2 025m
1 m 3x1.5 mm?2 H07RN powerCON2 TRUE12 TOP (m) (f) IP65
cPot cable R12-M 25mm2 025m
powerCON 32 A cable connector
Phoenix-3 Extension Cable, Hybrid, 6 ft. (Flat)
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
1.50m 3x1.5 ''E+F''(m) pC T1(f)
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
The SC19 is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices.
32A 5pin Panel Female
Usually ships within 12 weeks
cPot cable connector F
5 pole termination impedance 120 Ohm. Is connected as termination with the last instrument in a DMX-circle, with purple sockets for better distinction to the normal XLR connectors.
1.50m 3x2.5 pc T1(m) Schuko(f)
32A 4pin Panel Male
Usually ships within 12 weeks
cPot panel con M tb 2x35/1x25mm2
A lockable power cord assembled with powerCON TRUE1 female NAC3FX-W to male NAC3MX-W. The rubber cable has a wire diameter of 3x1.5 mm2. The cable is approved according to VDE and ENEC.
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
The SC21 is a high-quality 30cm (1') Lightning Accessory Cable designed to connect MFi-certified microphones and other devices with a USB-C output to iOS devices with a Lightning input.
Female panel mount connector without contacts. The SYNTAX SSX series, designed for professional lighting applications, and perfectly compatible with standard 19 pin Socapex (419 series), is extremely robust being of a machined aluminium alloy, thick wall construction with a hard black anodized finish or black painted finish.
This 16.4' AX1 Extension Cable from Astera allows connection of one AX1 tube to the AX1-CHR charger.
Extension cable to Helios, Titan, Hyperion Tube
Combined power-data cable with 1x power (3 x 2.5 mm2), 2x AES/EBU digital and 3x Cat.5e Ethernet. The black flame-retardant PVC jacket is flexible, shock-resistant and easy to handle. Suitable for the comfortable connection of professional mixing desks. The overall diameter is 23.3 mm. Price / meter.
Cable connector, quick lock with securing lever, type for power-IN IP65
Usually ships within 2 to 3 months
Cable connector, quick lock with securing lever, type for power-OUT IP65
Usually ships within 2 to 3 months
High-quality Lightning accessory cable
Lightning USB-C cable, 0.3m
32A 5pin Connector Line Female
Usually ships within 12 weeks
Connection cable 0.2 m to Titan PowerBox, set of 8 pieces.
powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables
A lockable power cord assembled with powerCON TRUE1 female NAC3FX-W to male NAC3MX-W. The rubber cable has a wire diameter of 3x1.5 mm2. The cable is approved according to VDE and ENEC.
Phoenix-7 Male Connector
Barrel Extension Cable, 3 ft.
32A 4pin Cable Female
Usually ships within 12 weeks
32A 4pin Panel Female
Usually ships within 12 weeks
32A 5pin Connector Line Male
Usually ships within 12 weeks
3 pole termination impedance 120 Ohm. Is connected as termination with the last instrument in a DMX-circle. With purple sockets for better distinction to the normal XLR connectors.
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
Phoenix-6 Male Connector
This SP-XC04 Extension Cable of Falcon Eyes is 4 meter long and made for the LED lights from the RX-T and LPL series.
Usually ships within 2 to 4 weeks
XLR to RJ45 Adapter, Male 5-pin
Phoenix-3 Hybrid to Barrel Adapter
XLR to RJ45 Adapter, Female 5-pin
32A/3P/230V(CEE Form), Cable Female Connector
Usually ships within 12 weeks
32A 3pin Female Socket CEE
Usually ships within 12 weeks
32A/3P CEE Connector Panel Male, 230V/blue
Usually ships within 12 weeks
The DMX Adapter Y Cable from Nanlite enables DMX connection to your Forza 150 light using standard male and female 5-pin XLR connectors. It plugs into the 3.5mm accessory socket of the light, providing in and out 5-pin DMX connections and allowing you to control a series of connected fixtures.
Usually ships within 3 to 6 weeks
RJ45 DMX Cable, 1 ft. (CAT6)
5-Pin XLR male to 5-Pin XLR Male Adapter
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
32A 4pin Cable Male
Usually ships within 12 weeks
This 10" USB Type-C to DMX Cable for PavoBulb and PixelTube from Nanlite makes it possible to control fixtures like the PavoTube LED Pixel Tube and the PavoBulb 10C via DMX. The cable features 5-pin XLR male and female connectors and a USB Type-C female connector to supply external power to compatible lights while controlling them with DMX
Usually ships within 3 to 6 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Phoenix-6 Female Connector
Professional flash connecting cable with spiral coil for pull relief. Signal red, length approx. 10 m (33 ft.)
Velcro Cable Ties 25mm X 300mm (Per 12)
16A 5pin Connector
Usually ships within 12 weeks
16A 4pin Connector Line Female
Usually ships within 12 weeks
32A/3P/230V(CEE Form), Cable Male Connector
Usually ships within 12 weeks
Professional flash connecting cable with spiral coil for pull relief. Signal red, length approx. 10 m (33 ft.)
cPot panel con M axial 10-25mm2
Phoenix-5 Male Connector
Barrel Extension Cable, 12 ft.
Phoenix-3 Hybrid Quick-On Cable
cPot cable connector M
Combined power-data cable with 1x power (3 x 1.5 mm2), 2x AES/EBU digital and 2x Cat.5e Ethernet. The black flame-retardant PVC jacket is flexible, shock-resistant and easy to handle. Suitable for the comfortable connection of professional mixing desks. The overall diameter is 19.6 mm. Price / meter
cPot panel con M M6x20mm IP65
USB C to Lightning Cable 1m Silver white
16A/3P CEE Connector Socket Male
Usually ships within 12 weeks
SkyPanel Remote USB Cable, 5 m
Phoenix-7 Female Connector
NEMA, 5-15P to locking C13, 6 ft.
A lockable power cord assembled with assembled with an powerCON TRUE1 NAC3FX-W on one side to open end on the other. The rubber cable has a wire diameter of 3x1.5 mm2 (AWG 12). The cable is approved according to VDE and ENEC.
3-pole powerCON TRUE1 appliance outlet connector, power-out, with locking mechanism and 6.35 mm screw terminals. Please note: this version is larger than the D-series. IP65.
For connecting flash equipment. With PC plug - PC socket
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance. Hook is made from A grade Nylon and has high peel and shear values with extended cycle life with average 55 hooks per sq inch.
Usually ships within 12 weeks
16A/4P CEE Connector Panel Female, 380V/red
Usually ships within 12 weeks
Ez-tie Cable Grip 20mm X 410mm - Red (10pcs Per Pack)
Usually ships within 12 weeks
Ez-tie Cable Grip 20mm X 410mm - Blue (10pcs Per Pack)
Usually ships within 12 weeks
Ideal for sound, lighting and audio/video equipment. EZ-Tie is made by Swiss-made looms and strictly quality control to assure consistent quality with superior performance.
Usually ships within 12 weeks
Phoenix-4 Male Connector
Phoenix-3 Hybrid Input Lead, White
A cable used for wireless sync of the Air Remote and Air Sync with cameras without hot shoe. The length is 30 cm and it connects a 3.5 mm miniphone male to a PC.
A cable used for wireless sync of the Air Remote and Air Sync with any studio light with a 1/4 sync socket. It connects a 1/4 phono male to a 3.5 mm miniphone male.
A cable used for wireless sync of the Air Remote and Air Sync with any studio light with 3.5 mm sync socket.
Combined power-data cable with 1x power (3 x 1.5 mm2) and 2x Cat.5e Ethernet. The black flame-retardant PVC jacket is flexible, shock-resistant and easy to handle. The overall diameter is 18.6 mm. Price / meter.
Cable connector, quick lock with securing lever, B-type for power-out, screw terminals
Usually ships within 2 to 3 months
Cable connector, quick lock with securing lever, A-type for power-in, screw terminals
Usually ships within 2 to 3 months
TOP appliance inlet-outlet combination with power-in and power-out in the same housing and with 6.35 mm flat tabs.
Flash cable with male PC plug on both sides to connect flashguns with PC outlet to the camera, e.g. Nikon SB-24, 25, 26, 28, 28 Dx, 80 Dx, 800, 900, 910 and Canon Speedlite 580 EX II, 600 EX, 600 EX-RT
16A 4pin Connector Line Male
Usually ships within 12 weeks
Phoenix-5 Female Connector
Barrel Extension Cable, 6 ft.
Barrel Cable, Male to Phoenix-2 Female
This D-Tap to 5.5mm DC Barrel Power Cable from Aputure is used to power your Amaran COB 60D or 60x lights, as well as the T2c and T4c tube lights.
powerCON 32 A chassis connector, power-in
Pendant clip black for suspension by steel wire or pendant rod, incl. M13 x 1 nut material: aluminium anodized or powder coated for E-TRACK Mains/DMX Black
Usually ships within 2 to 3 months
16A/3P/230VCEE Form), Panel Female Socket ( B&B)
Usually ships within 12 weeks
CONTRIK cPot CP-HTF
Safety cable (4 mm) 1 m, max. load 16 kg
16A/3P/230V(CEE Form), Cable Female Connector (B&B)
Usually ships within 12 weeks
16A/3P CEE Connector
Usually ships within 12 weeks
16A/3P CEE Connector All Black, Line Female
Usually ships within 12 weeks
3 Metre USB to USB C cable for Pavotube and other USB LED lights.
Usually ships within 3 to 6 weeks
Astera NYX extension cable for NYX Bulbs
For connecting flash equipment. With PC plug - PC socket
3-pole powerCON TRUE1 TOP female cable connector, power-out, with locking mechanism and screw terminals.
Sealing Self-Closing Cap PX
Mains Cable Con. Ooutlet CBC Top
3-pole powerCON TRUE1 TOP male cable connector, power-in, with locking mechanism and screw terminals.
Mains Cable Con. Inlet CBC Top
For connecting flash equipment. With PC plug - PC socket
Barrel Cable, Male to Quick-On, 10 mm, 0.5 m, 18AWG
D-Tap to 5,5mm DC Barrel Power Cable, with no locking barrel
Delay 2 months
3-pole powerCON TRUE1 TOP appliance outlet connector, power-out, with locking mechanism and 6.35 mm flat tabs, but without insulation divider. IP65.
RJ45 DMX Cable, 6 in. (CAT6)
3-pin powerCON TRUE1 device installation socket, power-out, with locking and 6.35 mm tabs. Note: This version is larger than the D series.
16A/3P Cee Connector All Black, Line Male
Usually ships within 12 weeks
16A/3P/229V(CEE Form), Cable Male Connector (B&B)
Usually ships within 12 weeks
Schuko is one of industrial standard connector mostly used in Germany and part of Europe. It is widely adopted in entertainment as well. Kupo supplies variation of assembly-type schuko for the need, including stiff housing and rubber encompassed model.
Usually ships within 12 weeks
16A/3P/230V(SHUKO), CABLE MALE CONNECTOR
Usually ships within 12 weeks
Lockable cable connector, power-out, screw terminals, gray
Mains Line Connector
The Astera DMX Adapter Cable for Art7 AsteraBox connects your Art7 AsteraBox to a DMX control board, enabling you to wirelessly control your Astera wireless fixtures using DMX. This item is the accessory cable only, and it does not include the Art7 AsteraBox.
Phoenix-3 Male Connector
Phoenix-4 Female Connector
RJ45 Connector-Coupler, Black
Barrel Twofer, One-Male to Two-Female
VGA Gender Changer f/f, High Density, RoHS compliant
For connecting flash equipment. With PC plug - PC socket
Phoenix Connector, Male 2-pin
Sealing Self-Closing Cap FPX
1/2DC Power Cord
Usually ships within 3 to 6 weeks
4 Pcs Per Pack (Szie : 40mm to 50mm)
Usually ships within 12 weeks
Schuko Connector Panel Female
Usually ships within 12 weeks
Sealing Self-Closing Cap D
Phoenix Connector, Female 2-pin
Phoenix-3 Female Connector
Barrel Cable, Male to Bare End, Black 36 in.
Ez Tie Petite, 7pcs Per Pack, White
Usually ships within 12 weeks
Ez Tie Petite, 7pcs Per Pack, Black
Usually ships within 12 weeks
3-pole powerCON TRUE1 TOP appliance inlet connector, power-in, with locking mechanism and 6.35 mm flat tabs, but without insulation divider.
3-pole powerCON TRUE1 TOP appliance inlet connector, power-in, with locking mechanism and 6.35 mm flat tabs. IP65.
End cup black for E-TRACK Mains/DMX Black
Usually ships within 2 to 3 months
Barrel Connector, Output
Barrel Connector, Input
Barrel Cable, Male to Bare End, Black 10 in.
Barrel Output Cable Bare-End to Barrel Female
The two disks are easily fitted to the central ring of six contacts, thereby creating a common ground ring.
Master-slave line
Usually ships within 3 to 6 weeks
Chassis connector, power-out, 3/16 inches flat tab terminals, gray, without insulation divider
DMX Cable are commonly used as stage control systems in Broadcasting (lighting) or for control of effect processors. DMX stands for "Digital Multiplex". This DMX Light Control Cable (Pat 512, 2 x 2 x 0.32 mm2) is black and therefore well-suited to be installed in theatres or concert halls. The jacket is made of DMC Flex PVC and is braid-and foil shielded....
Chassis connector, power-in, 3/16 inches flat tab terminals, blue, without insulation divider
This black DMX light control cable (Pat 512, 2 x 2 x 0.32 mm2) features an FRNC jacket as well as a foil and braided shield. The outer diameter measures 5.8 mm. DMX cables (DMX stands for Digital Multiplex) are commonly used for stage and event applications (lighting) for the control of effect processors. This cable is suitable for fixed installations....
Dust protection cover for most speakON and powerCON chassis connectors. It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.
Molded hook-and-loop velcro tie with a detachable plastic clip which ensures the plug stays in and the usb port is protected from damage when doing the shooting.
Usually ships within 12 weeks
cPot safety clip yellow
cPot safety clip red
The rubber sealing cover protects the powerCON TRUE1 male chassis connector NAC3MPX from dust and water according to protection class IP65
The rubber sealing cover protects the powerCON TRUE1 female chassis connector NAC3FPX* from dust and water according to protection class IP65.
Soft plastic cover for the rear ends of several D-size chassis connectors. It is used to protect the gap between connector and cable. The protection cover works with all common wires and cables you simply cut off the cover end to the preferred diameter.