For professionals and enthusiasts alike.
- Visuals warranty extension
- Backup equipment free of charge during the warranty
- Service support 7/7 available via our 3 emergency mobile numbers (GE/ZH/TI)
- Internal after sales support, tech@visuals.ch
- Software and Firmware upgrades perform by our Service engineers
Various Support Audio
Various Support Audio At Visuals, your audio euipment specialist in Switzerland
-
Contrik RDL-DC-1G - Desktop or Wall Mounted Chassis Gray
The gray DC-1G Desktop or Wall Mounted Chassis is designed to hold 1 Decora style unit, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or a vertical surface such as a cabinet or wall.
Usually ships within 2 to 4 weeks
100,64 CHF (tax excl.)
108,79 CHF (incl. taxes) In Stock -
Contrik RDL-RC-PS5 - 19" Rackmount for 5 Desktop Power Supplies
The RC-PS5 19" Rackmount for 5 Desktop Power Supplies can be used to mount up to 5 RDL desktop power supplies. Wiring can be routed out the sides or rear of the chassis.
Usually ships within 2 to 4 weeks
97,63 CHF (tax excl.)
105,54 CHF (incl. taxes) In Stock -
PreSonus NSB16.8-RACK-KIT - Rackmount Kit for NSB 16.8 AVB Network Stage Box
The PreSonus NSB 16.8 Rackmount Kit allows you to install your NSB 16.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Usually ships within 2 to 4 weeks
97,49 CHF (tax excl.)
105,39 CHF (incl. taxes) In Stock -
PreSonus NSB8.8-RACK-KIT - Rackmount Kit for NSB 8.8 AVB Network Stage Box
The PreSonus NSB 8.8 Rackmount Kit allows you to install your NSB 8.8 AVB network stagebox into a standard 19" rack mount enclosure. The kit includes two blank panels, two Ethernet cables, and mounting screws. One panel features two Ethercon jacks, which once connected with the included Ethernet cables, provides access to the AVB network ports from the...
Usually ships within 2 to 4 weeks
97,49 CHF (tax excl.)
105,39 CHF (incl. taxes) In Stock -
Contrik RDL-RK-2UX - 19" Utility Rack Chassis, 2 RU extension
The RK-2UX is an extension kit that adds 2RU in height to any RK-2U. Multiple kits may be added to an RK-2U to make it any height.
Usually ships within 2 to 4 weeks
97,26 CHF (tax excl.)
105,14 CHF (incl. taxes) In Stock -
DPA Microphones GSM4000 - Gooseneck Shock Mount for d:dicate
The DPA Microphones Gooseneck Shock Mount for d:dictate can be used to mount a microphone on an instrument. It is a combination of an 4.5" long gooseneck and shock mount. You can use it together with your choice of instrument clip and easily attach the mount to your specific instrument.
Usually ships within 2 to 4 weeks
97,13 CHF (tax excl.)
105,00 CHF (incl. taxes) In Stock -
Fohhn 8312-00000 - Clamp-1 with threat bolt M10
Clamp-1 with threat bolt M10 for traverse mounting
Prix sur demande -
Fohhn QAT-09 - Horizontal support for AT-08/09, black
Horizontal support for AT-08/09, black
Prix sur demande -
Fohhn QAT-09 - Horizontal support for AT-08/09, white
Horizontal support for AT-08/09, white
Prix sur demande -
Mackie DB-200 - Premium Desktop Microphone Boom Arm
Keep you microphone ready for action while reducing cable clutter with the Mackie DB-200, a stylish and sturdy premium desktop microphone boom arm that can be articulated to the perfect position.
97,00 CHF (tax excl.)
104,86 CHF (incl. taxes) In StockUsually ships within 2 to 3 weeks
-
Contrik RDL-HD-WM2 - Wall Mount Bracket for HD Series Amplifiers
The HD-WM2 mounts a compatible HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation. Special tabs are provided to firmly secure the wiring connected to the HD product.
Usually ships within 2 to 4 weeks
96,86 CHF (tax excl.)
104,71 CHF (incl. taxes) In Stock -
Neumann LH 29 - TV Spigot
The LH 29 TV-Spigot from Neumann is designed for mounting a monitor onto a lighting stand or G-clamp and truss bar
Usually ships within 2 to 4 weeks
95,79 CHF (tax excl.)
103,55 CHF (incl. taxes) In Stock -
Neumann LH 25 - Speaker Mounting Bracket
The LH 25 Speaker Mounting Bracket from Neumann allows you to mount your speaker monitor on a wall or ceiling. The LH 25 can also be fixed onto a loudspeaker stand
Usually ships within 2 to 4 weeks
95,79 CHF (tax excl.)
103,55 CHF (incl. taxes) In Stock -
Contrik RDL-WH1 - Power Supply Mounting Adapter Kit
The WH1 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Usually ships within 2 to 4 weeks
93,99 CHF (tax excl.)
101,60 CHF (incl. taxes) In Stock -
Contrik RDL-WH2 - Power Supply Mounting Adapter Kit
The WH2 Power Supply Mounting Adapter allows mounting of up to six wall wart power supplies together in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6" power cords, 6 sets of detachable mounting tabs, and 6 cable ties to secure the power supplies.
Usually ships within 2 to 4 weeks
93,99 CHF (tax excl.)
101,60 CHF (incl. taxes) In Stock -
Contrik RDL-HR-RA2 - Rack Adapter for HALF-RACK Series
The HR-RA2 Rack Adapter is ideal for mounting two HALF-RACK products, plates or accessories side-by-side in one rack space.
Usually ships within 2 to 4 weeks
93,92 CHF (tax excl.)
101,53 CHF (incl. taxes) In Stock -
Contrik RDL-HD-FP2L - Filler Panel with Lens
The HD-FP2L Filler Panel with Lens is designed to mount in front of an HD series product and facilitates complete viewing while preventing user adjustments or tampering with the device. Included lens can be removed during installation.
Usually ships within 2 to 4 weeks
92,35 CHF (tax excl.)
99,83 CHF (incl. taxes) In Stock -
Contrik RDL-RC-HPS3 - 10.4" Rack Adapter
The RC-HPS3 10.4" Rack Adapter mounts up to 3 desktop-style power supplies. Wiring may be routed out the sides and rear of the chassis. It features the Dual-Lok interlocking fastening system to allow you to secure your power supplies. The RC-HPS3 is compatible with all RDL desktop power supplies and with any other desktop power supply having dimensions...
Usually ships within 2 to 4 weeks
89,74 CHF (tax excl.)
97,01 CHF (incl. taxes) In Stock -
Contrik RDL-RM-D3 - 19" Rack Mount for 3 Decora Modules
The RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.
Usually ships within 2 to 4 weeks
89,14 CHF (tax excl.)
96,36 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-RA6 - Rack Adapter for 6 Increments of 1/6 Rack Width
The RDL EZ-RA6 Rack Adapter for 6 Increments of 1/6 Rack Width attaches to only one rack space and slides out for easy product mounting.
Usually ships within 2 to 4 weeks
89,09 CHF (tax excl.)
96,31 CHF (incl. taxes) In Stock -
DPA Microphones UA0639 - Microphone Clip
DPA Microphones' UA0639 Microphone Clip is a stand adapter for handheld mics that offers a tight grip while still letting you remove and secure your mic with ease.
Usually ships within 2 to 4 weeks
87,88 CHF (tax excl.)
95,00 CHF (incl. taxes) In Stock -
DPA Microphones TB4000 - Table Base
The DPA TB4000 Microphone Table Base works with most microphone holders with a 3/8-inch thread although its specifically optimized for use with Compact Shock Mount CSM4000. It's black non-reflective surface will match your microphone set up and blend into the background creating a pleasant aesthetic.
Usually ships within 2 to 4 weeks
87,88 CHF (tax excl.)
95,00 CHF (incl. taxes) In Stock -
DPA Microphones MC4001 - Microphone Clip for MMP-E Active Cable
The MC4001 Microphone Clip from DPA fits the recess at the MMP-E active cable preamp. It can be used with hanging mics or low-profile table or instrument mics (sold separately) to attach them to a 3/8" threaded mic stand.
Usually ships within 2 to 4 weeks
87,88 CHF (tax excl.)
95,00 CHF (incl. taxes) In Stock -
Contrik RDL-HD-BP1 - BACK-PACK Rear Cover
The BACK-PACK Rear Cover is designed to mount onto the HD Series Mixer or Amplifier and prevents users from accessing the rear panel of the device. Accommodating the power supply unit, the Rear Cover offers a fully closed back for the installed amplifier.
Usually ships within 2 to 4 weeks
87,05 CHF (tax excl.)
94,10 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-DC2 - Desktop Chassis for 1/3 Rack Width EZ Series Products
The EZ-DC2 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/3 rack width EZ Series of A/V components. The EZ-DC2 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Usually ships within 2 to 4 weeks
86,26 CHF (tax excl.)
93,25 CHF (incl. taxes) In Stock -
Contrik RDL-HR-HRA1 - 10.4" Rack Adapter
The HR-HRA1 10.4" Rack Adapter is a 1RU rack chassis for mounting one RDL HALF-RACK product, plate, or accessory. HALF-RACK series products drop into the chassis, slide into position, and are secured by tightening 2 or 4 screws provided with the HALF-RACK product or accessory. This adapter fits 10.4" (26.41 cm) racks.
Usually ships within 2 to 4 weeks
85,10 CHF (tax excl.)
91,99 CHF (incl. taxes) In Stock -
Fohhn QAT-07 - Horizontal support for AT-061/07, black
Horizontal support for AT-061/07, black
Prix sur demande -
Fohhn SA-100 Black - Stand Adapter
SA-100 is particularly suitable for mounting systems with T-slots on a conventional tripod. The adapter head can be tilted and locked.
Prix sur demande -
Fohhn QAT-07 - Horizontal support for AT-061/07, white
Horizontal support for AT-061/07, white
Prix sur demande -
Rycote RYC185809 - PCS-Utility Half Coupler Kit Small
PCS-Utility Half Coupler Kit Small
83,16 CHF (tax excl.)
89,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Rycote RYC185810 - PCS-Utility Half Coupler Kit Large
PCS-Utility Half Coupler Kit Large
83,16 CHF (tax excl.)
89,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Yamaha STAGEPASSPKSTD - Tripod for Club, BR, MS and MSR Series
Tripod for Club, BR, MS and MSR Series, Stagepas 400/600 (piece)
Usually ships within 2 to 4 weeks
80,08 CHF (tax excl.)
86,57 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-DC1 - Desktop Chassis for 1/6 Rack Width EZ Series Products
The EZ-DC1 is a simple desktop chassis that can hold electronics. It was specifically designed for mounting RDL's 1/6 rack width EZ Series of A/V components. The EZ-DC1 is a great solution for creating a custom installation, especially in situations where the operator is seated at a table or a desk.
Usually ships within 2 to 4 weeks
79,07 CHF (tax excl.)
85,47 CHF (incl. taxes) In Stock -
Yamaha WM2X08 - K&M Wall Mount for IF2108 & IF2208
K&M Wall Mount for IF2108 & IF2208 vertical & horizontal wall mounting
Usually ships within 2 to 4 weeks
78,32 CHF (tax excl.)
84,66 CHF (incl. taxes) In Stock -
Contrik RDL-HR-RU1 - Mounting Adapter Kit
The HR-RU1 is a mounting adapter kit that allows you to mount a RACK-UP module in one side of an HR-RA2 Rack Adapter. The kit consists of 2 mounting brackets and the necessary mounting screws.
Usually ships within 2 to 4 weeks
78,23 CHF (tax excl.)
84,57 CHF (incl. taxes) In Stock -
Fohhn WS-6 - Wall bracket, Black
Wall bracket, rotating, for speakers with notch. Black
Prix sur demande -
-
Fohhn VLX-11 - Universal bracket for Linea LX-11, white
Universal bracket for Linea LX-11, white
Prix sur demande -
Fohhn VLX-11 - Universal bracket for Linea LX-11, black
Universal bracket for Linea LX-11, black
Prix sur demande -
Neumann LH 28 - Tripod Speaker Stand Adapter
The LH 28 Tripod Speaker Stand Adapter from Neumann is a mounting adaptor for mounting standard tripods with a 35 mm diameter mounting pole. It features a locking screw knob for safety
Usually ships within 2 to 4 weeks
75,58 CHF (tax excl.)
81,70 CHF (incl. taxes) In Stock -
Neumann LH 37 - Mounting Flange Adapter
The LH 37 Mounting Flange Adapter from Neumann is designed for mounting on to a subwoofer with a top panel flange
Usually ships within 2 to 4 weeks
75,58 CHF (tax excl.)
81,70 CHF (incl. taxes) In Stock -
Fohhn QAT-05 - Horizontal support for AT-05, black
Horizontal support for AT-05, black
Prix sur demande -
Fohhn QAT-05 - Horizontal support for AT-05, white
Horizontal support for AT-05, white
Prix sur demande -
Contrik RDL-EZ-HRA3 - 10.4" Rack Adapter
The RDL EZ-HRA3 10.4" Rack Adapter when used with the EZ-RA6 Base Plate Assembly (sold separately) allows you to mount any EZ A/V device and occupies 1 RU 10.4" (26.41 cm) space.
Usually ships within 2 to 4 weeks
73,97 CHF (tax excl.)
79,96 CHF (incl. taxes) In Stock -
Rycote RYC185803 - PCS-Spigot
The PCS-Spigot is the ideal accessory to convert your stands and arms with spigot connections into super reliable, quick release systems and attach any kit with a 3/8" thread.
73,91 CHF (tax excl.)
79,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Rycote RYC185804 - PCS-Utility
The PCS-Utility is made from robust, high-quality materials whilst being super versatile. With milled anodised aluminium on the exterior for a lightweight but robust body, ensuring durability even in the most challenging conditions
73,91 CHF (tax excl.)
79,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Cineboutique A-CARDELPLCM - CARDELLINI - Mic Clamp
CARDELLINI - Mic Clamp
Usually ships within 2 to 4 weeks
73,13 CHF (tax excl.)
79,05 CHF (incl. taxes) In Stock -
Yamaha RK-MG12 - Rackmount Kit for MG12 and MG12XU
Rackmount Kit for MG12 and MG12XU
Usually ships within 2 to 4 weeks
71,28 CHF (tax excl.)
77,05 CHF (incl. taxes) In Stock -
Yamaha C1941000055 - Free Angle Clamp
KÖNIG & MEYER Clamp bracket for AG03/06, MG6/10, MS101IV, MSP3, STAGEPAS 400/600 Mixer
Usually ships within 2 to 4 weeks
71,28 CHF (tax excl.)
77,05 CHF (incl. taxes) In Stock -
Yamaha RK-EMX7 - Rackmount Kit for EMX7
Rackmount Kit for EMX7
Usually ships within 2 to 4 weeks
70,40 CHF (tax excl.)
76,10 CHF (incl. taxes) In Stock -
Ultimate TS-70B - Tripod Load capacity of 150lbs, single, black
Tripod (Black) Load capacity of 150lbs single, Alu, weight 2.4kg, 1270-1956mm, max. 68.2 kg
Usually ships within 2 to 4 weeks
69,00 CHF (tax excl.)
74,59 CHF (incl. taxes) In Stock -
Cineboutique A-CARDELPECM - CARDELLINI - Mic Clamp
CARDELLINI - Mini narrow press - Male Congress
Usually ships within 2 to 4 weeks
68,25 CHF (tax excl.)
73,78 CHF (incl. taxes) In Stock -
Contrik RDL-FP-PSB1A - Desktop Power Supply Mounting Bracket
The RDL FP-PSB1 is a mounting bracket designed for the PS-24U2 power supply. A provision is included for mounting other modules, and any FP-PA20 type audio power amplifier can be mounted directly to the FP-PSB1 as well. The FP-PSB1 can be mounted in an FP-RRA or FP-RRAH Flat-Pak series rack mount panel or to any flat surface.
Usually ships within 2 to 4 weeks
67,83 CHF (tax excl.)
73,32 CHF (incl. taxes) In Stock -
Neumann LH 47 - Mounting Adapter Plate
The Neumann LH 47 Mounting Adapter Plate is used in conjunction with Neumann LH series active monitor mounting accessories
Usually ships within 2 to 4 weeks
67,67 CHF (tax excl.)
73,15 CHF (incl. taxes) In Stock -
Fohhn WAL-03 - Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
Wall bracket for AL-10/20, LX-10, LC-20 and LEN-20, black
Prix sur demande -
Fohhn CSK-1 - Ceiling suspension kit
Ceiling suspension kit, with two Y-shaped cables
Prix sur demande -
Contrik RDL-SF-MSM1 - Microphone Stand Mount for SysFlex Modules
Mounts any SysFlex Module on a Mic Stand (Standard 5/8" 27 TPI). Compatible with All SysFlex Modules. Each SysFlex Module Secured by One Single Screw
Usually ships within 2 to 4 weeks
66,47 CHF (tax excl.)
71,85 CHF (incl. taxes) In Stock -
Contrik RDL-ST-PBR4 - Stick-On Mounting Bracket
The ST-PBR4 Stick-On Mounting Bracket is a mounting frame with slots for four Stick-On modules. It mounts on an FP-PSB1A power supply bracket (available separately) or to any flat surface. The mounting bracket design allows the installer to secure the modules without using any adhesive pads and to slide into a FLAT-PAK rack mount track (available...
Usually ships within 2 to 4 weeks
65,70 CHF (tax excl.)
71,02 CHF (incl. taxes) In Stock -
Vocas 0350-1460 - Mic holder 15mm
Mic holder 15mm
Usually ships within 2 to 4 weeks
62,99 CHF (tax excl.)
68,09 CHF (incl. taxes) In Stock -
PreSonus EM-MOUNT - Mounting Kit for PreSonus EarMix 16M
The PreSonus EM-Mount Mounting Kit is designed specifically for the PreSonus EarMix 16M AVB personal monitor mixer and allows for the unit to be mounted to a music stand or microphone stand. The mount can be deployed with two options: it can attach to the standard screw mount at the top of a microphone stand or it can be clamped horizontally to a pole.
Usually ships within 2 to 4 weeks
60,35 CHF (tax excl.)
65,24 CHF (incl. taxes) In Stock -
PreSonus SLMAD-RACK - StudioLive Series III Console Rackmount Kit
The PreSonus Series III Rackmount Kit allows you to rackmount any StudioLive Series III console, including the 16, 24, and 32 channel versions. The 6-RU rack ears attach to the side of the console with the included mounting screws. A minimum depth of 23" (14 RU) should be allowed for installation.
Usually ships within 2 to 4 weeks
60,35 CHF (tax excl.)
65,24 CHF (incl. taxes) In Stock -
Contrik RDL-TX-HRA3 - 10.4" Rack Adapter
The TX-HRA3 10.4" Rack Adapter allows you to securely rack mount up to 3 TX modules. This adapter fits 10.4" (26.41 cm) racks.
Usually ships within 2 to 4 weeks
59,68 CHF (tax excl.)
64,51 CHF (incl. taxes) In Stock -
Neumann LH 64 - Omnimount/VESA Adaptor
An adapter to convert a pair of 70 mm spaced M8 mounting points to the standard Omnimount 75, VESA 75, and VESA 100 mounting points
Usually ships within 2 to 4 weeks
58,88 CHF (tax excl.)
63,65 CHF (incl. taxes) In Stock -
Neumann LH 48 - Tripod Adapter Plate
The black LH 48 Tripod Adapter Plate from Neumann is a 4.5 (115 mm) flange adapter for mounting a monitor or loudspeaker on König & Meyer tripods No. 26790 and No. 26795
Usually ships within 2 to 4 weeks
58,88 CHF (tax excl.)
63,65 CHF (incl. taxes) In Stock -
Fohhn SA-3 - Reducing flange
Reducing flange, 36mm dia. with M10 female thread for vertical brackets VAT-10/20/34/50, VXT-2/3/5, VLX-11, VPT-6 and VPT-70
Prix sur demande -
Contrik RDL-RU-BR1 - Mounting Bracket for Rack-Up Module
The RU-BR1 Mounting Bracket for Rack-Up Module is a special mounting bracket designed for use with RDL Rack-Up modules. The bracket allows you to mount (1) module above or below any horizontal surface.
Usually ships within 2 to 4 weeks
56,91 CHF (tax excl.)
61,52 CHF (incl. taxes) In Stock -
Yamaha WM 2205 - K&M Wall Mount for IF2205
K&M Wall Mount for IF2205 vertical & horizontal mounting
Usually ships within 2 to 4 weeks
56,32 CHF (tax excl.)
60,88 CHF (incl. taxes) In Stock -
Yamaha Kit Rack G55/V55 - Rack mounting kit for G55 and XD-V55
Rack mounting kit for G55 and XD-V55
Usually ships within 2 to 4 weeks
56,06 CHF (tax excl.)
60,60 CHF (incl. taxes) In Stock -
-
Fohhn VAS-12 - Flying- and mounting bracket, black
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
Prix sur demande -
Fohhn VAS-12 - Flying- and mounting bracket, white
Flying- and mounting bracket, set of 2, ball impact resistant (two sets per subwoofer - 4 brackets - required!)
Prix sur demande -
Fohhn QLX-20 - Horizontal bracket for LX-20 ASX, white
Horizontal bracket for LX-20 ASX, white
Prix sur demande -
-
-
Contrik RDL-RU-HRA1 - 10.4" Rack Adapter
The RU-HRA1 10.4" Rack Adapter mounts 1 RACK-UP module or mounting frame for AMS accessories. This adapter fits 10.4" (26.41 cm) racks.
Usually ships within 2 to 4 weeks
55,86 CHF (tax excl.)
60,38 CHF (incl. taxes) In Stock -
Contrik RDL-HD-FP1 - Filler Panel
The Filler Panel is designed to fill the empty space in the rack adapter or mount in front of an HD series mixer or amplifier, and prevents users from making adjustments or tampering with the device.
Usually ships within 2 to 4 weeks
55,07 CHF (tax excl.)
59,53 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-SD2 - 1/3 Rack Width Storage Drawer
The EZ-SD2 is a slide-out rack drawer that can hold cables, adapters, and more. It was designed to easily mount into the RDL EZ-RA6 rack tray, or the EZ-CC6 component chassis. The EZ-SD2 is a great solution for creating a custom installation of EZ-Series gear in a rack that even has its own storage space.
Usually ships within 2 to 4 weeks
54,29 CHF (tax excl.)
58,69 CHF (incl. taxes) In Stock -
Contrik RDL-SMK-12 - Stick-On Mounting Kit
The SMK-12 Stick-On Mounting Kit is a kit that allows you to mount Stick-On modules to a flat surface. It will accommodate up to (6) modules mounted flat or up to (12) modules mounted on their edge. The modules are fastened to the mounting board using screws.
Usually ships within 2 to 4 weeks
53,39 CHF (tax excl.)
57,71 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-SD1 - 1/6 Rack Width Storage Drawer
The EZ-SD1 is a slide-out rack drawer that can hold cables, adapters, and more. It was designed to easily mount into the RDL EZ-RA6 rack tray, or the EZ-CC6 component chassis. The EZ-SD1 is a great solution for creating a custom installation of EZ-Series gear in a rack that even has its own storage space.
Usually ships within 2 to 4 weeks
52,08 CHF (tax excl.)
56,30 CHF (incl. taxes) In Stock -
PreSonus SL1602-RACK EAR - Rack adapter for SL 1602
Rack adapter for SL 1602
Usually ships within 2 to 4 weeks
51,07 CHF (tax excl.)
55,21 CHF (incl. taxes) In Stock -
Contrik RDL-HR-FP1 - Half Rack Filler Panel
The HR-FP1 is a filler panel that occupies half of a rack space, or one product space in RDL half rack mounting chassis, like the HR-RA2. It's designed to blend in seamlessly with other half rack products.
Usually ships within 2 to 4 weeks
50,56 CHF (tax excl.)
54,66 CHF (incl. taxes) In Stock -
Contrik RDL-HD-ASC1 - Amplifier Security Cover
The Amplifier Security Cover is designed to mount onto the HD Series Mixer or Amplifier and prevents users from making adjustments or tampering with the device. You can access the power buttons and indicators even after mounting the cover on the amplifier/mixer.
Usually ships within 2 to 4 weeks
48,88 CHF (tax excl.)
52,84 CHF (incl. taxes) In Stock -
Contrik RDL-EZ-SMB2 - Surface Mounting Bezel for 1/3 Rack Width Modules
The EZ-SMB2 is a simple wall-mounting bezel that can hold electronics. It was specifically designed for mounting RDL's 1/3 rack width EZ Series of A/V components. The EZ-SMB2 is a great solution for creating a custom installation, especially in situations where you need a seamless mount on a flat surface.
Usually ships within 2 to 4 weeks
48,72 CHF (tax excl.)
52,67 CHF (incl. taxes) In Stock -
Yamaha RK1 - Rackmount Kit for QL1
Rackmount Kit for QL1
Usually ships within 2 to 4 weeks
48,40 CHF (tax excl.)
52,32 CHF (incl. taxes) In Stock -
Fostex EB-6301 - Mounting bracket for 6301N/6301B series
Mounting bracket for 6301N/6301B series
48,21 CHF (tax excl.)
52,12 CHF (incl. taxes) In StockUsually ships within 4 weeks
-
Mackie Bracket SRM350/C200 - Mounting - Flight Bracket to SRM 350 / C 200
Mounting - Flight bracket to SRM 350 / C 200
48,00 CHF (tax excl.)
51,89 CHF (incl. taxes) In StockUsually ships within 2 to 3 weeks
-
Blueshape MMIC-S - Wireless stand adaptor
Wireless microphone receiver stand. Fits directly on top of the battery without additional screws. Provided with spare fasteners.
Usually ships within 2 to 4 weeks
47,78 CHF (tax excl.)
51,65 CHF (incl. taxes) In Stock -
Contrik RDL-RC-HPS1 - 10.4" Rack Mount for Desktop Power Supply and TX Module
The RC-HPS1 10.4" Rack Mount for Desktop Power Supply and TX Module mounts one desktop style power supply and one RDL TX module. The RC-HPS1 is compatible with all RDL desktop power supplies and with any desktop power supply with maximum dimensions of 5.8 x 3.0 x 1.7". This adapter fits standard 10.4" racks.
Usually ships within 2 to 4 weeks
46,29 CHF (tax excl.)
50,04 CHF (incl. taxes) In Stock -
Rycote RYC185802 - PCS-Lite 3/8"
Made from durable, high-quality materials in a non-reflective finish, this Professional Connection System will reduce time wasted on attaching microphone shock mounts, windshields or lighting accessories to stands, arms or booms and improve efficiencies in your workflow.
46,16 CHF (tax excl.)
49,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Rycote RYC185812 - PCS-Lite 5/8"
Designed with the MI industry in mind, the PCS-Lite is made from durable, non-reflective high-quality materials in neutral colors and comes with 5/8" threaded fittings, allowing for quick and easy microphone changes whilst maintaining a secure connection to your microphone stand. Perfect for use with the Invision-USM and other studio microphone shock mounts.
46,16 CHF (tax excl.)
49,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Rycote RYC185800 - PCS-Organizer
Made from durable, high-quality materials in a non-reflective finish, this Professional Connection System will reduce time wasted on attaching and positioning microphone shock mounts, windshields, monitors and antennas, significantly improving efficiencies in your workflow.
46,16 CHF (tax excl.)
49,90 CHF (incl. taxes) In StockUsually ships within 4 to 5 weeks
-
Contrik RDL-EZ-SMB1 - Surface Mounting Bezel for 1/6 Rack Width Modules
The EZ-SMB1 is a simple wall-mounting bezel that can hold electronics. It was specifically designed for mounting RDL's 1/6 rack width EZ Series of A/V components. The EZ-SMB1 is a great solution for creating a custom installation, especially in situations where you need a seamless mount on a flat surface.
Usually ships within 2 to 4 weeks
45,31 CHF (tax excl.)
48,98 CHF (incl. taxes) In Stock -
Fohhn QLX-11 - Horizontal bracket for Linea LX-10, black
Horizontal bracket for Linea LX-10
Prix sur demande -
Fohhn VL-89 - Extension for VAT-08/09, black
Extension for VAT-08/09, long: 180 mm, M10 thread, black
Prix sur demande -
Fohhn VL-89 - Extension for VAT-08/09, white
Extension for VAT-08/09, long: 180 mm, M10 thread, white
Prix sur demande -
Fohhn QLX-11 - Horizontal bracket for Linea LX-10, white
Horizontal bracket for Linea LX-10
Prix sur demande -
Fohhn WS-4 - Wall Bracket, Black
Wall bracket, rotating, for speakers with notch, black
Prix sur demande -
Fohhn WS-4 - Wall Bracket, White
Wall bracket, rotating, for speakers with notch, white
Prix sur demande -
Fohhn WAL-1 - Pair of L-brackets, black
Pair of L-brackets for Linea LX-100/150, DLI-130/230, LC-20/60/100/150/220 and LEN-20/60/100/150/220
Prix sur demande -
Fohhn WAL-1 - Pair of L-brackets, white
Pair of L-brackets for Linea LX-100/150, DLI-130/230, LC-20/60/100/150/220 and LEN-20/60/100/150/220
Prix sur demande
-
Need help,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Need financing,
Call us!
