For professionals and enthusiasts alike.
- Visuals warranty extension
- Backup equipment free of charge during the warranty
- Service support 7/7 available via our 3 emergency mobile numbers (GE/ZH/TI)
- Internal after sales support, tech@visuals.ch
- Software and Firmware upgrades perform by our Service engineers
Microphone Suspension Accessory
König & Meyer 21500.000.29 - Thread adapter - zinc-plated
1/2" and 3/8" female thread, 5/8" 27 gauge male thread
3,00 CHF (tax excl.) No tax1 pieces in stock
Neumann SG 110 nx - Swivel Joint
The SG 110 nx swivel mount can be inserted between KK 1... capsules and the KM D output stage. The capsule can then be swiveled and orientated through ± 110°
Usually ships within 1 to 2 weeks
316,66 CHF (tax excl.) No taxNeumann Z 48 - Elastic Suspension
Shock mount for the microphones U 67 and U 87.
Usually ships within 1 to 2 weeks
316,66 CHF (tax excl.) No taxShure A88SM - Isolation (Shock) Mount
Isolation (Shock) Mount for VP88 Stereo Microphone
Ships within 3 weeks
259,00 CHF (tax excl.) No taxNeumann MNV 87 - Auditorium Hanger (Nickel)
The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts
Usually ships within 1 to 2 weeks
219,64 CHF (tax excl.) No taxNeumann MNV 87 mt - Auditorium Hanger (Black)
The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts
Usually ships within 1 to 2 weeks
219,64 CHF (tax excl.) No taxSennheiser MZT-8000 - Table stand, cable 3m
Table stand, cable 3m
194,06 CHF (tax excl.) No taxUsually ships within 1 week
Sennheiser MZT-8001 - Table stand
Elegant table stand with acrylic base.
194,06 CHF (tax excl.) No taxUsually ships within 1 week
Yellowtec YT3237 - Genelec 8020 to Vesa Adapter
Genelec 8020 to Vesa Adapter compatible up to Version C
Usually ships within 1 to 2 weeks
172,70 CHF (tax excl.) No taxKönig & Meyer 29375.000.55 - Microphone table base - black
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / microphone ON/OFF)
Ships within 3 weeks
168,00 CHF (tax excl.) No taxKönig & Meyer 29377.000.55 - Microphone table base - black
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with pushbutton "push-to-talk" (black). Two diodes indicate the operating state (voltage / microphone ON/OFF)
Ships within 3 weeks
168,00 CHF (tax excl.) No taxKönig & Meyer 29390.000.55 - Microphone table base - black
Black cast-iron base with a horizontally mounted XLR-style female socket on upper face. Removable plate, suitable for fitting switches, indicators, controls or connectors, with access to space for additional circuitry. Base is fitted with rear-mounted 3-pole XLR male connector
Ships within 3 weeks
128,00 CHF (tax excl.) No taxKönig & Meyer 29376.000.55 - Microphone table base - black
Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, without pushbutton or switch
Ships within 3 weeks
121,00 CHF (tax excl.) No taxNeumann MNV 100 - Auditorium Hanger
The MNV 100 auditorium hanger is used to suspend a detached miniature microphone capsule freely from ist interconnecting cable. The assembly can be rotated and tilted to any desired angle. Suitable for cables with 3 - 3.5 mm diameter
Usually ships within 1 to 2 weeks
113,79 CHF (tax excl.) No taxRycote 041125 - Invision Stereo Pair Kit
InVision Stereo Pair Kit
110,40 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Arri K2.66256.0 - Microphone Bracket Holder MBH-1
The Microphone Bracket Holder provides offset support for any standard microphone bracket fitted with a 3/8 thread.The Microphone Bracket Holder can be attached to any Arri 3/8 accessory interface - such as handles - cage arms and top plates.
Usually ships within 2 to 4 weeks
96,32 CHF (tax excl.) No taxYellowtec YT3216 - Table Mount
Table Mount: For mounting mic arm desktop where thickness does not allow use of other options
Usually ships within 1 to 2 weeks
93,78 CHF (tax excl.) No taxYellowtec YT3215 - Table through mount
Table through mount: Alternative to Bushing, Requires smaller hole in desktop
Usually ships within 1 to 2 weeks
90,99 CHF (tax excl.) No taxNeumann Z 26 mt - Inline Microphone Shock Mount
The Z 26 rubber shock mount is inserted between the stand and the swivel mount to avoid the transmission of structure-borne noise. It has a 3/8" threaded stud and a 5/8"-27 female thread to attach to tripods. Included is a thread adapter for 1/2" and 3/8" studs
Usually ships within 1 to 2 weeks
87,32 CHF (tax excl.) No taxYellowtec YT3211 - Bushing
Bushing: For mounting mic arm through a desktop, Best option for furniture integration, Elegant stainless steel, Good for standby mounting points
Usually ships within 1 to 2 weeks
84,49 CHF (tax excl.) No taxNeumann SG 5 - Swivel Joint
On the microphone side it has a 3/8" male thread, on the stand side a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands
Usually ships within 1 to 2 weeks
80,27 CHF (tax excl.) No taxRycote 037324 - Softie Lyre Mount With Mhr
Softie Lyre Mount with MHR
74,52 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 041126 - Invision Inv-7 Pop Filter Kit
InVision INV-7 Pop Filter Kit
72,11 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Shure A44AM - Swivel Microphone Mount for the KSM44A
Swivel microphone mount securely mounts a side-address, large-diaphragm microphone, like the KSM44A, to a standard microphone stand.
Ships within 3 weeks
71,50 CHF (tax excl.) No taxRycote 040121 - Pair Of Duo-Lyre 72 (19/34)
Pair of Duo-Lyre 72 (19/34) (with modular adaptor & screws)
66,24 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 040137 - Pair Of Duo-Lyre 68 (19/34)
Pair of Duo-Lyre 68 (19/34) (with modular adaptor & screws)
66,24 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 040155 - Pair Of Duo-Lyre 72 (19/34)
Pair of Duo-Lyre 72 (19/34) (with stereo risers)
66,24 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 040156 - Pair Of Duo-Lyre 68 (19/34)
Pair of Duo-Lyre 68 (19/34) (with stereo risers)
66,24 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 047305 - 3/8" Boom Adaptor Swivel With 10Cm
3/8" Boom Adaptor Swivel with 10cm Hot Shoe Extension
62,10 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 041117 - Invision Inv-6 Heavy
InVision INV-6 Heavy
55,20 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Yellowtec YT3210 - Table Clamp
Table Clamp: For mounting mic arm clamped to a desktop, Easy to hand tighten/release, Sturdy construction
Usually ships within 1 to 2 weeks
52,92 CHF (tax excl.) No taxNeumann MNV 21 mt - Auditorium Hanger
The Neumann MNV 21 MT is designed to hang Neumann miniature or KMR81 microphones over stages, theaters, halls, board rooms, houses-of worship, etc. The mount features a cable strain relief with a lock and uses the tension on the microphone cable to create the desired mounting angle
Usually ships within 1 to 2 weeks
52,92 CHF (tax excl.) No taxRycote 047306 - 3/8" Boom Adaptor Swivel With Camer
3/8" Boom Adaptor Swivel with Camera Clamp/Hot Shoe Adaptor
51,06 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Shure A53M - Isolation and Swivel Shock Stopper Microphone Mount
The A53M from Shure is a high-quality isolation mount and swivel adapter. The mount has standard threads for use with a variety of mic stands and boom arms.
Ships within 3 weeks
47,20 CHF (tax excl.) No taxShure A55HM - Half-Mount Isolation and Swivel Snap-In Shock Stopper Mount
The A55HM Snap-In Shock Stopper from Shure is a half-mount isolation mount and swivel adapter. The mount has standard threads for use with a variety of mic stands and boom arms.
Ships within 3 weeks
47,20 CHF (tax excl.) No taxRycote 185805 - 2 X 3/8" Male PCS Tips w/ leather washers fitted
The pair of 3/8"-16 Tips for PCS-Boom Adapter from Rycote are quick release tips that allow PCS connectivity with any 3/8"-16 female threaded shockmount or windshield kit (sold separately).
45,89 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 185807 - Classic Adaptor for PCS-Boom w/ XLR holder
Classic Adaptor for PCS-Boom w/ XLR holder - (fits Modular Windshield Kits). The Classic Adapter for PCS-Boom from Rycote is an adapter that provides a neat, lightweight, and simple way to integrate the PCS-Boom (sold separately) into existing Rycote windshield kits.
45,89 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 185808 - Cyclone Adaptor for PCS-Boom w/ XLR holder
Cyclone Adaptor for PCS-Boom w/ XLR holder - (Fits Cyclone Windshield Kits). The Cyclone Adapter for PCS-Boom from Rycote is an adapter that provides a neat, lightweight, and simple way to integrate the PCS-Boom (sold separately) into existing Rycote windshield kits.
45,89 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 047307 - 3/8" Boom Adaptor Swivel
3/8" Boom Adaptor Swivel
44,16 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Sennheiser MZT30-L - Table-mounted socket
Table-mounted socket for MZH goosenecks, 5 pole XLR-F, black
42,71 CHF (tax excl.) No taxUsually ships within 1 week
Sennheiser MZH908-B - Robust microphone clamp for brass
Microphone horn clamp for attaching the e 908 or the e 608 to the bell of a brass instrument. Clamp is an included accessory of the e 908 B.
42,71 CHF (tax excl.) No taxUsually ships within 1 week
Sennheiser MZH908-D - Robust microphone clamp for drums
Microphone drum clamp for attaching the e 908 or the e 608 to a drum. Clamp is an included accessory of the e 908 D.
42,71 CHF (tax excl.) No taxUsually ships within 1 week
Beyerdynamic ZSH 210 - Tripod Adapter for MPR 210/211 - 3/8 inch mounting
Tripod Adapter for MPR 210/211 - 3/8 inch mounting
Usually ships within 1 to 2 weeks
42,00 CHF (tax excl.) No taxRycote 037335 - Mhr Adaptor
MHR Adaptor
41,40 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 079903 - Mic Case, 30cm
The 11.8" Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
39,33 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Yellowtec YT3219-10 - Cable Clamp for Monitor Arm and Microphone Arm
Cable Clamp for Monitor Arm and Microphone Arm (10 cps)
Usually ships within 1 to 2 weeks
38,04 CHF (tax excl.) No taxYellowtec YT3220-10 - Cable Clamp for Monitor Arm
Cable Clamp for Monitor Arm Polybag, Pack of 10
Usually ships within 1 to 2 weeks
36,21 CHF (tax excl.) No taxRycote 040136 - Single Duo-Lyre 72 (19/34)
Single Duo-Lyre 72 (19/34) (with stereo risers)
34,50 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 040138 - Single Duo-Lyre 68 (19/34)
Single Duo-Lyre 68 (19/34) (with stereo risers)
34,50 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042276 - Boom Adaptor with Lever & XLR Holder MkIII
Boom Adaptor with Lever & XLR Holder MkIII
34,50 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
König & Meyer 11901.000.62 - Acoustic absorber with Velcro strip - anthracite
Noise insulation inlay made of foam; its dimensions are 605 x 240 x 50 mm.
Ships within 3 weeks
33,00 CHF (tax excl.) No taxShure A55M - Isolation and Swivel Shock Stopper Microphone Mount
The A55M Shock Stopper from Shure is a high-quality isolation mount and swivel adapter. The mount has standard threads for use with a variety of mic stands and boom arms.
Ships within 3 weeks
33,00 CHF (tax excl.) No taxRycote 079902 - Mic Case, 20cm
The 7.9" Rycote Microphone Protector Case is a water-resistant cylindrical case designed to provide multi-layered protection of several small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
32,78 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 037705 - 20 Cm Hot Shoe Extension
20 cm Hot Shoe Extension
31,74 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rode Pivot Adaptor - 3/8" pivoting boom adaptor
The R?DE Pivot Adaptor is a durable machined-aluminium, brass and high-grade polymer adaptor for mounting on boom stands and boompoles, allowing for up to 210 degrees of pivot. A 5/8" to 3/8" adaptor is included.
Usually ships within 1 to 2 weeks
31,57 CHF (tax excl.) No taxRycote 047304 - 3/8"F To 1/4" Thread / Hot Shoe Ada
3/8"F to 1/4" ThreAD / Hot Shoe Adaptor
31,05 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Yellowtec YT3246-10 - Yellow Spacer
Yellow Spacer. Pack of 10
Usually ships within 1 to 2 weeks
30,64 CHF (tax excl.) No taxYellowtec YT3221-6 - Cable Clamp for MMS System Pole Polybag
Cable Clamp for MMS System Pole Polybag. Pack of 6
Usually ships within 1 to 2 weeks
30,64 CHF (tax excl.) No taxKönig & Meyer 22130.300.55 - Table flange - black
With 3/8" hexagonal screw for vertical and lateral connection of goosenecks, etc. 4 mm cable entry hole
Ships within 3 weeks
28,00 CHF (tax excl.) No taxRycote 042250 - Pair Of Single Lyre 62 (19/25)
Pair of Single Lyre 62 (19/25) (with premodular adaptor & screws)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048473 - Replacement X Small Modular Bar
Replacement X Small Modular Bar
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048471 - Replacement Xx Small Modular Bar
Replacement XX Small Modular Bar
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048463 - Pair Of Stereo Clips
Pair Of 25Sq/25Sq-25Sq/25Sq Stereo Clips
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048461 - Pair Of Stereo Clips
Pair Of 19/19Rd-25Sq/25Sq Stereo Clips
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048460 - Pair Of Stereo Clips
Pair Of 19/19Rd - 25Rd/25Rd Stereo Clips
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042269 - Pair Of Single Lyre 62 (8)
Pair of Single Lyre 62 (8) (with modular adaptor & screws)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042268 - Pair Of Single Lyre 82 (19/25)
Pair of Single Lyre 82 (19/25) (with stereo risers)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042255 - Pair Of Single Lyre 62 (19/25)
Pair of Single Lyre 62 (19/25) (with modular adaptor & screws)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 048462 - Pair Of Stereo Clips
Pair Of 25Rd/25Rd-25Rd/25Rd Stereo Clips
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042232 - Pair Of Single Lyre 82 (30)
Pair of Single Lyre 82 (30) (with modular adaptor & screws)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042275 - Replacement Lyres, 416 Windshield Kit
Replacement Lyres, 416 Windshield Kit
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042274 - Replacement Lyres, Cable Clip, Super-Blimp NTG
Replacement Lyres & Cable Clip, Super-Blimp NTG
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 018525 - Replacement Filler Strip 105mm
Replacement Filler Strip 105mm
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 018507 - Replacement Filler Strip 240mm
Replacement Filler Strip 240mm
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 042229 - Pair Of Single Lyre 62 (9.5)
Pair of Single Lyre 62 (9.5) (with modular adaptor & screws)
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 018506 - Replacement Filler Strip 180mm
Replacement Filler Strip 180mm
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 018505 - Replacement Filler Strip 120mm
Replacement Filler Strip 120mm
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 018504 - Replacement Filler Strip 40mm
Replacement Filler Strip 40mm
27,60 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Shure AMV-PC - Phone Clamp and Mic Clip for MV88+
Phone Clamp and Mic Clip for MV88+
Ships within 3 weeks
27,40 CHF (tax excl.) No taxKönig & Meyer 22110.300.55 - Table flange - black
Black base and tube with 3/8" thread
Ships within 3 weeks
25,00 CHF (tax excl.) No taxRycote 037304 - Camera Clamp Adaptor Only
Camera Clamp Adaptor only
24,84 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 037321 - 1/4" Invision Video Adaptor
1/4" InVision Video Adaptor
24,84 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Yellowtec YT3247-10 - Plastic Sleeve
Plastic Sleeve for Mika. Pack of 10
Usually ships within 1 to 2 weeks
24,14 CHF (tax excl.) No taxYellowtec YT9590 - Litt Mounting Flange Black
Litt Mounting Flange - Mounts riser to a desktop
Usually ships within 1 to 2 weeks
24,14 CHF (tax excl.) No taxYellowtec YT9520 - Litt Mounting Flange
Litt Mounting Flange - Mounts riser to a desktop
Usually ships within 1 to 2 weeks
24,14 CHF (tax excl.) No taxSennheiser MZT-30 - Flush mount with XLR-3 socket
The MZT 30 is a flush mount with XLR-3 socket which can be used in combination with the XLR-3 goosenecks MZH 3015, MZH 3040 and MZH 3042.
23,21 CHF (tax excl.) No taxUsually ships within 1 week
Rycote 047303 - 3/8"F To 1/4"M Thread Adaptor
3/8"F to 1/4"M ThreAD Adaptor
22,08 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 047308 - 3/8" Boom Swivel With Lever
3/8" Boom Swivel with Lever
22,08 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
König & Meyer 23910.000.55 - Quick Release Adapter
The K&M Quick Release Adapter for Microphones is an adapter designed to attach a microphone clip, holder, or other accessory to a mic stand and allow for quick removal and placement of the microphone or accessory
Ships within 3 weeks
21,00 CHF (tax excl.) No taxShure AP56DM - Drum Mount for PGA56 Microphone
The Shure AP56DM Drum Mount attaches a PGA56 microphone directly to a drum rim without the need of a mic stand. This is ideal for close-miking of snares and toms in both live sound reinforcement and studio recording applications.
Ships within 3 weeks
20,80 CHF (tax excl.) No taxShure AP98DM - Drum Mount for PGA98D Microphone
The Shure AP98DM Drum Mount attaches a PGA98D condenser microphone directly to a drum rim without the need of a mic stand. This is ideal for miking drums and percussion in both live sound reinforcement and studio recording applications.
Ships within 3 weeks
20,80 CHF (tax excl.) No taxShure A50D - Microphone Drum Mount A50D
The Shure Microphone Drum Mount A50D is a microphone mount designed for use with drums. It features a screw-on mount to secure the microphone and is designed with rubber to offer more stability and ease of use.
Ships within 3 weeks
20,80 CHF (tax excl.) No taxRycote 048488 - Back-To-Back Clips
Back-to-Back Clips
20,70 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Shure A13HDB - Heavy-Duty Mounting Flange (Matte Black)
Heavy-Duty Mounting Flange for Gooseneck and Shaft Microphone Mounts (Matte Black)
Ships within 3 weeks
19,80 CHF (tax excl.) No taxRycote 037327 - Brass Shoe Adaptor With 1/4-Inch Ma
Brass Shoe Adaptor with 1/4-inch male thread
17,94 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 037319 - Camera Clamp / Shoe Adaptor
Camera Clamp / Shoe Adaptor
14,49 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rycote 045004 - Pop Filter Spare Foam (Pack Of 5)
Pop Filter Spare Foam (pack of 5)
13,80 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Beyerdynamic BS 86 - Set for flash holder
Set for flash holder. Adaptor with 3/8" thread mountable to a flash-/accessory holder on a camera.
Usually ships within 1 to 2 weeks
12,00 CHF (tax excl.) No taxRycote 048808 - Mic Tube, Long (Pack of 3)
The set of three Rycote Microphone Twist Tubes offers protection and simplified transport of multiple small-diaphragm microphones for boom operators and production sound recordists in ENG, EFP, television production, and film shoots.
11,14 CHF (tax excl.) No taxUsually ships within 1 to 2 weeks
Rode BLIMP Mount - Universal Blimp Mount Adapter for Rode Blimp
This Rode Universal Blimp Mount Adapter is a lightweight mounting adapter for the Rode Blimp windshield shock mounting system. The adapter allows for quick and easy mounting onto boompoles, stands, handgrips and other 3/8" thread mounting devices. The Universal Blimp Mount is a lightweight, easily interchangeable alternative to grip handles.
Usually ships within 1 to 2 weeks
11,14 CHF (tax excl.) No tax
- 1
- 2
- Need help,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Need financing,
Call us!
- Photo & Video
- Filters
- 4.5 inch Filter
- 5 inch Filter
- 6 inch Filter
- 9.5 inch Filter
- 25mm Filter
- 27mm Filter
- 28mm Filter
- 30mm Filter
- 30.5mm Filter
- 34mm Filter
- 36.5mm Filter
- 37mm Filter
- 39mm Filter
- 40.5mm Filter
- 43mm Filter
- 46mm Filter
- 48mm Filtre
- 49mm Filter
- 52mm Filter
- 55mm Filter
- 58mm Filter
- 62mm Filter
- 67mm Filter
- 72mm Filter
- 77mm Filter
- 82mm Filter
- 86mm Filter
- 92mm Filter
- 94mm Filter
- 95mm Filter
- 102mm Filter
- 103mm Filter
- 105mm Filter
- 107mm Filter
- 112mm Filter
- 114mm Filter
- 115mm Filter
- 125mm Filter
- 127mm Filter
- 138mm Filter
- 152mm Filter
- 162mm Filter
- Filter 2x2
- Filter 2x3
- Filter 2.64x3.35
- Filter 3x3
- Filter 3x4
- Filter 3.35x3.35
- Filter 3.35x4.33
- Filter 3.3x3.9
- Filter 4x4
- Filter 4x5
- Filter 4x6
- Filter 4x5.65
- Filter 4.5x4.5
- Filter 5x5
- Filter 5x6
- Filter 5.65x5.65
- Filter 6.5x6.5
- Filter 6x6
- Filter 6x6.53
- Filter 6x6.69
- Filter 6.5x7.87
- Filter 6.5x8.5
- Filtre 6.6x6.6
- Filter 8x8
- Viewing Filter
- Filter Kits
- Filters accessories
- Filter Series 9
- Special Applications Filters
- Filter Wheel
- Ground glasses / Frame glows
- FSND Filter
- Memory carts and Storage
- View all products
- Camera
- Photographic Camera
- Lenses
- Follow Focus
- Wireless
- Chargers and Batteries
- Memory carts and Storage
- Recorder
- Mixer
- Monitor
- Projectors
- Studio player
- Tripod and monopod
- Crane and Jib
- Travelling
- Cine Film Scanner
- Drone
- Live Transmission
- Broadcast Infrastructure
- Mattebox and accessories
- Prompter
- Ultrasonic Measure
- Filters
- 4.5 inch Filter
- 5 inch Filter
- 6 inch Filter
- 9.5 inch Filter
- 25mm Filter
- 27mm Filter
- 28mm Filter
- 30mm Filter
- 30.5mm Filter
- 34mm Filter
- 36.5mm Filter
- 37mm Filter
- 39mm Filter
- 40.5mm Filter
- 43mm Filter
- 46mm Filter
- 48mm Filtre
- 49mm Filter
- 52mm Filter
- 55mm Filter
- 58mm Filter
- 62mm Filter
- 67mm Filter
- 72mm Filter
- 77mm Filter
- 82mm Filter
- 86mm Filter
- 92mm Filter
- 94mm Filter
- 95mm Filter
- 102mm Filter
- 103mm Filter
- 105mm Filter
- 107mm Filter
- 112mm Filter
- 114mm Filter
- 115mm Filter
- 125mm Filter
- 127mm Filter
- 138mm Filter
- 152mm Filter
- 162mm Filter
- Filter 2x2
- Filter 2x3
- Filter 2.64x3.35
- Filter 3x3
- Filter 3x4
- Filter 3.35x3.35
- Filter 3.35x4.33
- Filter 3.3x3.9
- Filter 4x4
- Filter 4x5
- Filter 4x6
- Filter 4x5.65
- Filter 4.5x4.5
- Filter 5x5
- Filter 5x6
- Filter 5.65x5.65
- Filter 6.5x6.5
- Filter 6x6
- Filter 6x6.53
- Filter 6x6.69
- Filter 6.5x7.87
- Filter 6.5x8.5
- Filtre 6.6x6.6
- Filter 8x8
- Viewing Filter
- Filter Kits
- Filters accessories
- Filter Series 9
- Special Applications Filters
- Filter Wheel
- Ground glasses / Frame glows
- FSND Filter
- Remote Zoom/Focus
- Various Support
- Steadicam
- Bags and Protections
- Cable Video
- Warranty Extension
- Filters
- LIGHTING
- Light Modifiers
- View all products
- Audio
- View all products
- Storage
- View all products
- Interface & IT
- View all Hardware and Software
- MEDICAL EQUIPMENT
- Great deals
- Brands
- NEW
