Pole Accessory
- Visuals warranty extension
- Backup equipment free of charge during the warranty
- Service support 7/7 available via our 3 emergency mobile numbers (GE/ZH/TI)
- Internal after sales support, tech@visuals.ch
- Software and Firmware upgrades perform by our Service engineers
Pole Accessory
-
Rode Boompole Clips - Boompole cable Cips (Pack of 5)
The Rode Boompole Cips are a set of 5 plastic ring clips that are used to secure microphone cables onto Rode boompoles. Secure cables mean less handling noise and easier control.
12,00 CHF (tax excl.) 12,92 CHF (incl. taxes)3 pieces in stock
-
K-Tek KFT - Flow Through Base
The K-Tek Straight Cable Flow Through Base Unit known as a "Flow Through Foot", is intended to facilitate smooth entry and egress of a straight XLR cable from K-Tek boompole models K-202 and K-251. It has a 4 inch long slot to permit cable flow without binding and the base is of a standard Mushroom type.
Usually ships within 4 weeks
78,00 CHF (tax excl.) 84,01 CHF (incl. taxes) -
K-Tek KFTS - Flow Through Base
The K-Tek "Stubby" Straight Cable Flow Through Base Unit known as a "Flow Through Foot", is intended to facilitate smooth entry and egress of a straight XLR cable from K-Tek boompole models K-56 and K-102.
Usually ships within 4 weeks
78,00 CHF (tax excl.) 84,01 CHF (incl. taxes) -
K-Tek KHG - Handgrip
Handgrip offers an efficient and professional method to handhold the system or easily attach it to a pole or stand. Made of foamcovered graphite, this comfortable grip features a K-Tek pole head with a threaded base and weights just 80 grammes.
Usually ships within 4 weeks
48,00 CHF (tax excl.) 51,70 CHF (incl. taxes) -
K-Tek KHGW - Wired Handgrip
Consists of a pole head, 6in boom pole graphite w/foam, a male XLR connecter with 2(F) 3/8, 16 mounting threads. It gives 7in more reach&hardly weighs anything. Mechanically isolates the pole from the mount&provides the soft cloth covered wire pig tail.
Usually ships within 4 weeks
96,00 CHF (tax excl.) 103,39 CHF (incl. taxes) -
K-Tek KCC - Base Unit with Male XLR
The K-Tek Base Unit is for use with internally coiled XLR cables, is a replacement Output base for Boompoles, providing a bottom mounting XLR Male type instead of the standard Mushroom base.
Usually ships within 4 weeks
102,00 CHF (tax excl.) 109,85 CHF (incl. taxes) -
K-Tek KCCR - Base Unit with Right angle XLR
The K-Tek XLR Base Unit is for use with internally coiled XLR cables, attaches to the end of a Boomplole in replacement of the standard Mushroom base and provides an XLR Male side exit connector.
Usually ships within 4 weeks
138,00 CHF (tax excl.) 148,63 CHF (incl. taxes) -
K-Tek KTA2 - Transmitter Adapter Side Mount
Transmitter Adapter Side Mount, Machined aluminum side mount outfitted with an XLR connector.
Usually ships within 4 weeks
162,00 CHF (tax excl.) 174,47 CHF (incl. taxes) -
K-Tek KCK81 - Cable Kit
Cable Kit for the K81 Klassic Pole
Usually ships within 4 weeks
102,00 CHF (tax excl.) 109,85 CHF (incl. taxes) -
K-Tek KCK102 - Cable Kit
Cable Kit for the K102 Klassic Pole
Usually ships within 4 weeks
102,00 CHF (tax excl.) 109,85 CHF (incl. taxes) -
K-Tek KCK202 - Cable Kit
Cable Kit for the K-202 Klassic Pole
Usually ships within 4 weeks
102,00 CHF (tax excl.) 109,85 CHF (incl. taxes) -
K-Tek KCK152 - Cable Kit
Cable Kit for the K152 Klassic Pole
Usually ships within 4 weeks
102,00 CHF (tax excl.) 109,85 CHF (incl. taxes) -
Yellowtec YT9401 - Litt Universal Mounting Kit
Litt Universal Mounting Kit, Fits top of MMS pole, Included with YT9100 Litt 50 base,Clamps throgh desk or ceiling
Usually ships within 1 to 2 weeks
11,00 CHF (tax excl.) 11,85 CHF (incl. taxes) -
Yellowtec YT9500 - Litt Riser 120mm aluminum
Litt Riser 120mm aluminum. The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
21,00 CHF (tax excl.) 22,62 CHF (incl. taxes) -
Yellowtec YT9501 - Litt Riser 240mm aluminum
Litt Riser 240mm aluminum. The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
24,00 CHF (tax excl.) 25,85 CHF (incl. taxes) -
Yellowtec YT9502 - Litt Riser 360mm aluminum
Litt Riser 360mm aluminum. The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
28,00 CHF (tax excl.) 30,16 CHF (incl. taxes) -
Yellowtec YT9510 - Litt Riser 120mm aluminum with lock screw - Price on Demand
Litt Riser 120mm aluminum with lock screw. The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
24,00 CHF (tax excl.) 25,85 CHF (incl. taxes) -
Yellowtec YT9511 - Litt Riser 240mm aluminum with lock screw - Price on Demand
Litt Riser 240mm aluminum with lock screw.The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
28,00 CHF (tax excl.) 30,16 CHF (incl. taxes) -
Yellowtec YT9512 - Litt Riser 360mm aluminum with lock screw - Price on Demand
Litt Riser 360mm aluminum with lock screw. The Litt Riser is a 29mm diameter alumminuum pole for mounting the Litt at different heights
Usually ships within 1 to 2 weeks
31,00 CHF (tax excl.) 33,39 CHF (incl. taxes) -
Yellowtec YT9550 - Litt Spoiler
Litt Spoiler. Optional section between riser pole and Litt. For aesthetic purposes only
Usually ships within 1 to 2 weeks
24,00 CHF (tax excl.) 25,85 CHF (incl. taxes) -
Yellowtec YT3235 - MMS System Pole 18cm aluminium
MMS System Pole 18cm aluminium: Short pole for TV arm,requires YT3245 mounting kit
Usually ships within 1 to 2 weeks
39,00 CHF (tax excl.) 42,00 CHF (incl. taxes) -
Yellowtec YT3236 - MMS System Pole 18cm black
MMS System Pole 18cm black: Short pole for TV arm, requires YT3245 mounting kit, New black finish
Usually ships within 1 to 2 weeks
39,00 CHF (tax excl.) 42,00 CHF (incl. taxes) -
Yellowtec YT3213 - MMS Pole Adaptor
MMS Pole Adaptor: For mounting mic arm on the side of a MMS pole
Usually ships within 1 to 2 weeks
94,00 CHF (tax excl.) 101,24 CHF (incl. taxes) -
Yellowtec YT3240 - MMS System Pole 17 inch (43.18cm)
Hold one or more arms and accessories, Internal steel thread for mounting, Mount to desk, floor or ceiling, Mic arm, studiolight or Litt plug in top, Four horizontal positions, Sleek anodized aluminium extrusion, Vertical positions depend on height of pole, Custom lengths available up to 6000mm
Usually ships within 1 to 2 weeks
79,00 CHF (tax excl.) 85,08 CHF (incl. taxes) -
Yellowtec YT3243 - MMS System Pole 21 inch (53.34cm)
Hold one or more arms and accessories, Internal steel thread for mounting, Mount to desk, floor or ceiling, Mic arm, studiolight or Litt plug in top, Four horizontal positions, Sleek anodized aluminium extrusion, Vertical positions depend on height of pole, Custom lengths available up to 6000mm
Usually ships within 1 to 2 weeks
98,00 CHF (tax excl.) 105,55 CHF (incl. taxes) -
Yellowtec YT3241 - MMS System Pole 33 inch (83.82cm)
Hold one or more arms and accessories, Internal steel thread for mounting, Mount to desk, floor or ceiling, Mic arm, studiolight or Litt plug in top, Four horizontal positions, Sleek anodized aluminium extrusion, Vertical positions depend on height of pole, Custom lengths available up to 6000mm
Usually ships within 1 to 2 weeks
127,00 CHF (tax excl.) 136,78 CHF (incl. taxes) -
Yellowtec YT3260 - MMS Wall Mount Pole 17 inch (43.18cm)
Wall mount version of MMS pole, Three horizontal positions, Mounting holes provided in flat side, Custom lengths available up to 6000mm
Usually ships within 1 to 2 weeks
81,00 CHF (tax excl.) 87,24 CHF (incl. taxes) -
Yellowtec YT3261 - MMS Wall Mount Pole 35 inch (88.9cm)
Wall mount version of MMS pole, Three horizontal positions, Mounting holes provided in flat side, Custom lengths available up to 6000mm
Usually ships within 1 to 2 weeks
121,00 CHF (tax excl.) 130,32 CHF (incl. taxes) -
Yellowtec YT3245 - MMS Pole Desktop Mounting Kit
MMS Pole Desktop Mounting Kit: Secures MMS pole to table top, Best solution for permanent installation
Usually ships within 1 to 2 weeks
41,00 CHF (tax excl.) 44,16 CHF (incl. taxes) -
Yellowtec YT3218 - MMS Pole Power Sting - Price on Demand
MMS Pole Power Sting: To slot MMS pole to YT3211 bushing, Good solution for temporary installation
Usually ships within 1 to 2 weeks
45,00 CHF (tax excl.) 48,47 CHF (incl. taxes)
-
Need help,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Need financing,
Call us!
