Au service des professionnels et passionnés
- Garantie Visuals supplémentaire
- Équipement de backup gratuit pendant la période de garantie
- Assistance gratuite 7/7 via les trois numéros d'urgence (GE/ZH/TI)
- Service après-vente en interne, tech@visuals.ch
- Mise à jour firmware et software effectuée par nos soins
Accessoires follow focus
Accessoires follow focus sur Visuals, votre site spécialisé photo et vidéo en Suisse
-
Arri K2.47629.0 - FF5 Adapter for Bridge Plate19 mm
For mounting FF-5 HD orFF-5 Cine on 19 mm studio suppor trods. Can be removed/mounted by user in the field.
Délai habituel entre 2 et 4 semaines
448,50 CHF HT
484,83 CHF TTC en stock -
Arri K2.65253.0 - Standard Focus Knob (left side)
modified for soft stops with fingers. Includes: K2.32701.0 - Marking Disk - Flat
Délai habituel entre 2 et 4 semaines
448,50 CHF HT
484,83 CHF TTC en stock -
Arri K2.32985.0 - Extension for Focus Knob
Extends focus knob out to clear large studio matte boxes.
Délai habituel entre 2 et 4 semaines
404,63 CHF HT
437,41 CHF TTC en stock -
Fujinon FMM-X1 - Manual Focus Module for Fujinon XA16sX Lens
The Fujinon FMM-X1 is a manual focus module for Fujinon 16x HDTV lens model XA16sX.
Délai habituel entre 2 et 4 semaines
391,95 CHF HT
423,70 CHF TTC en stock -
Vocas 0500-1100 - MFC-2 Gear unit 1:1 ratio
MFC-2 Gear unit 1:1 ratio
Délai habituel entre 2 et 4 semaines
391,76 CHF HT
423,49 CHF TTC en stock -
Vocas 0500-1110 - MFC-2 Gear unit 1:1.75 ratio
MFC-2 Gear unit 1:1.75 ratio
Délai habituel entre 2 et 4 semaines
391,76 CHF HT
423,49 CHF TTC en stock -
Vocas 0500-1215 - MFC-2 Knob wood with stops
MFC-2 Knob wood with stops
Délai habituel entre 2 et 4 semaines
383,76 CHF HT
414,84 CHF TTC en stock -
Tilta WLC-T03-M1 - Nucleus-M Motor (550mm motor cable included)
Nucleus-M Motor(550mm motor cable included)
365,40 CHF HT
395,00 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Tilta WLC-T03-M - Nucleus-M Motor
Nucleus-M Motor
361,19 CHF HT
390,45 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Chrosziel P-RC-TP6 - Remote Control
Remote Control for Chrosziel Lens Testing Projector MK6 (and previous versions). Complete set incl.: 10m / 32,6 ft cable, Handgrip with rocker switch and battery compartment, 9 Volt block-battery (Alkaline)
Délai habituel entre 2 et 4 semaines
346,61 CHF HT
374,69 CHF TTC en stock -
Chrosziel P-RC-TP7 - Remote Control
Remote Control for Chrosziel Lens Testing Projector MK7 (and previous versions). Complete set incl.: 10m / 32,6 ft cable, Handgrip with rocker switch. Unit powered by projector
Délai habituel entre 2 et 4 semaines
346,61 CHF HT
374,69 CHF TTC en stock -
Tilta WLC-T03-HR - Nucleus-M Handgrip (Right)
Nucleus-M Handgrip (Right)
339,83 CHF HT
367,36 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Chrosziel P-MN-GAUGE - RS232 connection cable
RS232 connection cable for P-MG-D1 (Digital Meassuring Gauge 0,001) to MagNum serialport (in conjunction with Chrosziel Lens Testing Projector MK6) 9 pin Lemo 0B
Délai habituel entre 2 et 4 semaines
333,45 CHF HT
360,46 CHF TTC en stock -
SmallRig 3782B - MagicFIZ Wireless Follow Focus Handgrip Kit
The SmallRig 3782B MagicFIZ Wireless Follow Focus Handgrip Kit is designed to provide a precise and low-latency follow focus experience for video shooting.
329,21 CHF HT
355,88 CHF TTC en stockDélai habituel entre 4 et 5 semaines
-
Arri K2.0015757 - Cable CAM (7p) - LANC/D-Tap (0.6m/2ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to LANC connectors (e.g. Canon C300 / C500) and D-Tap power source. Provides camera RUN/STOP function and tally on ARRI and cmotion cPRO hand units
Délai habituel entre 2 et 4 semaines
321,75 CHF HT
347,81 CHF TTC en stock -
Arri K2.0018814 - Cable CAM (7p) - Sony F55 CTRL/D-Tap (0.6m/2ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to Sony F5/55 cameras and D-Tap power source. Provides camera RUN/STOP function and tally. Length: 0.6m/2ft
Délai habituel entre 2 et 4 semaines
321,75 CHF HT
347,81 CHF TTC en stock -
Arri KK.0005755 - Zip Gear Basic Set
Zip Gear Basic Set. Includes: K2.66131.0 2x Zip Gear
Délai habituel entre 2 et 4 semaines
321,75 CHF HT
347,81 CHF TTC en stock -
Vocas 0500-1221 - MFC-2 / 6 studio knob standard
This is a separate focus knob for the MFC-2 / 6 follow focus
Délai habituel entre 2 et 4 semaines
319,56 CHF HT
345,44 CHF TTC en stock -
Arri K2.34100.0 - Flexible Shaft Short (300mm)
Flexible Shaft Short (300mm)
Délai habituel entre 2 et 4 semaines
312,00 CHF HT
337,27 CHF TTC en stock -
Vocas 0500-1211 - MFC-2 Knob wood
MFC-2 Knob wood
Délai habituel entre 2 et 4 semaines
311,81 CHF HT
337,07 CHF TTC en stock -
Chrosziel P-MN-CABLE - Cable combined power/motor-control
Cable combined power/motor-control from MagNum receiver (MN-200R) to motor connection Chrosziel Lens Testing Projector MK6
Délai habituel entre 2 et 4 semaines
307,13 CHF HT
332,01 CHF TTC en stock -
Chrosziel P-MPG - Plan Glass
Plan Glass, incl. holder to calibrate the Chrosziel Lens Testing Projector MK6
Délai habituel entre 2 et 4 semaines
307,13 CHF HT
332,01 CHF TTC en stock -
Chrosziel P-DF-CABLE - Cable combined power/motor-control
Cable combined power/motor-control from Digifox receiver to motor connection Chrosziel Lens Testing Projector MK6&MK7
Délai habituel entre 2 et 4 semaines
307,13 CHF HT
332,01 CHF TTC en stock -
Tilta WLC-T03-HL - Nucleus-M Handgrip (Left)
Nucleus-M Handgrip (Left)
303,62 CHF HT
328,21 CHF TTC en stockDélai de livraison de 4 à 6 semaines
-
Arri K2.65102.0 - 64 tooth - 0.8Metric Module Gear
64 tooth - 0.8Metric Module Gear - When used with FF5-HD - approximates drive ratio of FF-4.
Délai habituel entre 2 et 4 semaines
282,75 CHF HT
305,65 CHF TTC en stock -
Arri K2.0020752 - FF Gear 0.8 Module, 43 Tooth, 45mm
A follow focus gear with the 0.8 module used with cine lenses, optimized with 43 teeth for zoom lenses, extra width of 45mm for zoom lenses with large barrels or lenses with extending element when pulling focus.
Délai habituel entre 2 et 4 semaines
282,75 CHF HT
305,65 CHF TTC en stock -
Arri K2.47235.0 - Coupling for Flexible Shaft
For use of Flexible Shaft orFocus Lever without Focus Knob. With FF-3 - can be mounted right side - with FF-4 or FF5-HD - can be mounted leftor right side.
Délai habituel entre 2 et 4 semaines
273,00 CHF HT
295,11 CHF TTC en stock -
Arri K2.0020132 - FF Gear 0.8 Module, 35 Tooth, 45mm
A follow focus gear with the 0.8 module used with cine lenses, optimized with 35 teeth for prime lenses, extra width of 45mm for zoom lenses with large barrels or lenses with extending element when pulling focus.
Délai habituel entre 2 et 4 semaines
273,00 CHF HT
295,11 CHF TTC en stock -
Arri K2.0044203 - Rosette Adapter RA-8
his ARRI RA-8 Rosette Adapter attaches an OCU-1 Operator Control Unit to your ZMU-4 Zoom Control Unit.
Délai habituel entre 2 et 4 semaines
273,00 CHF HT
295,11 CHF TTC en stock -
Arri K2.47557.0 - 35 tooth - 0.8Metric Module Gear for external Focus Lenses
35 tooth - 0.8Metric Module Gear for external Focus Lenses - 25mm face.
Délai habituel entre 2 et 4 semaines
263,25 CHF HT
284,57 CHF TTC en stock -
Arri K2.65124.0 - 78 tooth - 0.5Metric Module Gear - Wide Face
Tooth - 0.5 Metric Module Gear - Wide Face - for Canon & Angenieux ENG Lenses requiring wider focus gear - for Follow Focus MFF-1 & FF5-HD - 10mm face - for Lenses requiring wider focus gear.
Délai habituel entre 2 et 4 semaines
263,25 CHF HT
284,57 CHF TTC en stock -
Arri K2.47632.0 - 64 tooth - 6mm face - 0.6 Metric Module Gear for Fujinon ENG Lenses
64 tooth - 6mm face - 0.6 Metric Module Gear for Fujinon ENG Lenses - 6mm face.
Délai habituel entre 2 et 4 semaines
263,25 CHF HT
284,57 CHF TTC en stock -
Arri K2.0015758 - Cable CAM (7p) - RED CTRL/D-Tap (0.6m/2ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to RED CTRL connector on RED Epic DSMC-2 and RED Weapon cameras and D-Tap power source. Provides camera RUN/STOP function, tally and control of EF lenses
Délai habituel entre 2 et 4 semaines
263,25 CHF HT
284,57 CHF TTC en stock -
Arri K2.0036610 - cforce mini Clamp Console 2 19/15mm
Compatible with ARRI's CLM-5, cforce mini, cforce mini RF, Operater Control Unit OCU-1 and cmotion's cPro motor. Includes: K2.0038503 1x cforce mini Clamp Insert 2 19/15mm
Délai habituel entre 2 et 4 semaines
263,25 CHF HT
284,57 CHF TTC en stock -
Shape TPST - T-SHAPE Pro Top Handle
T-SHAPE pro top handle with Arri standard thread
Délai habituel entre 2 et 4 semaines
254,69 CHF HT
275,32 CHF TTC en stock -
Chrosziel AL2-USB422-AX1-M - Aladin2 USB 422 Adaptor
Aladin2 USB 422 Adaptor for PC applicationsLength 1,80m with Lemo 1B-10pin cable plug male
Délai habituel entre 2 et 4 semaines
254,48 CHF HT
275,09 CHF TTC en stock -
Arri K2.47631.0 - 78 tooth - 6mm face - 0.5 MetricModule Gear
Tooth - 0.5 Metric Module Gear for Canon & Angenieux ENG Lenses - 6mm face for Follow Focus MFF-1 & FF5-HD - 6mm face
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.65125.0 - 64 tooth - 0.6Metric Module Gear - Wide Face - for Fujinon ENG Lenses
64 tooth - 0.6Metric Module Gear - Wide Face - for Fujinon ENG Lenses - 10mm face - for Lenses requiring wider focus gear.
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.72112.0 - CLM-4 gear assembly
CLM-4 gear assembly with module 0.8/32 pitch - 50 teeth - - 25mm wide gear for moving lens barrels. Includes metal gear flange.
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.0012785 - Cable LBUS (angled) to LBUS (angled) 20 cm
Connects LBUS devices (e.g. cforce motors). Includes two angled LBUS connectors. Length: 0.2m/8ft
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.0013040 - Cable LBUS (angled) to LBUS (angled) 60 cm
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.6m/2ft
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.0012630 - Cable LBUS (angled) to LBUS (angled) 80 cm
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.8m/2.6ft
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Arri K2.0010365 - cforce plus Gear m0.8, 60t, 25mm
25mm wide gear for moving lens barrels
Délai habituel entre 2 et 4 semaines
253,50 CHF HT
274,03 CHF TTC en stock -
Chrosziel AL2-USB422-AX2-M - Aladin2 USB 422 Adaptor
Aladin2 USB 422 Adaptor for PC applicationsLength 1,80m with Lemo 0B 7pin cable plug male
Délai habituel entre 2 et 4 semaines
245,70 CHF HT
265,60 CHF TTC en stock -
Arri K2.0002656 - Cable CAM (16p) - F65 (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to Sony F65. Provides camera RUN/STOP function. Length: 0.5m/1.6ft. Separate UMC-4 RS IN cable for power supply required.
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri KK.0047207 - Smart Iris Ring Set (5x)
Smart Iris Ring Set (5x)
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0015755 - Cable CAM (7p) - EXT (16p) (0.8m/2.6ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to the EXT connector of an ALEXA EV camera. Provides camera RUN/STOP function, tally and camera status information on ARRI and cmotion hand units. Length: 0,8m/2.6ft
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri KK.0005768 - Marking Disk, Flat, Set 10x
Marking Disk, Flat, Set 10x for Standard or 2-speed Focus Knobs, Wireless Compact Unit WCU-3. Includes: K2.32701.0 10x Marking Disk, Flat
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0015759 - Cable CAM (7p) - ENG (12p) (0.3m/1ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to 12 pin Hirose lens connectors. Requires separate power source. Length: 0.3m/1ft
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0013041 - Cable LBUS (angled) to LBUS (straight) 100 cm
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 1m/3.3ft
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0006756 - Cable LBUS 15m/49ft
LBUS cable (Le 4p, Le 4p). Length: 15m/49ft.
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0002044 - CLM-4 gear assembly with 48 pitch - 75 teeth
CLM-4 gear assembly with 48 pitch - 75 teeth - For Panavision zoom.
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Arri K2.0001604 - Cable UMC to AMIRA
Connects Universal Motor Controllers to AMIRA EXT connector.
Délai habituel entre 2 et 4 semaines
243,75 CHF HT
263,49 CHF TTC en stock -
Fujinon CFH-11 - Focus Grip for HDTV/Broadcast Lenses
The Fujinon CFH-11 is a manual focus grip designed to work with the MM-11, MS-11, and MS-11D control kits, in conjunction with the CFC-12-990 flexible cable and FMM manual focus module.
Délai habituel entre 2 et 4 semaines
238,39 CHF HT
257,70 CHF TTC en stock -
Arri K2.0001637 - Cable UMC RS IN to RS
Connects RS connector on camera side to RS IN connector on UMC-4. Provides power supply and camera RUN/STOP function.
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.72107.0 - CLM-4 Rod-to-Rod Adapter Bridge 15mm
CLM-4 Rod-to-Rod Adapter Bridge 15mm - 15mm rod-to-rod adapter that attaches to CLM-4 motor.
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.0012628 - Cable LBUS (angled) to AMIRA EXT (straight) 80 cm
Connects AMIRA and ALEXA Mini EXT to LBUS devices (e.g. Master Grips). Includes one angled LBUS connector. Length: 0.8m/2.6ft
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.0013044 - Cable LBUS (angled) to LCS 80 cm
Connects LBUS devices (e.g. Master Grips) with LCS devices (e.g. ALEXA Plus/Studio cameras). Length: 0.80m/2.6ft
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.0013042 - Cable LBUS (angled) to LBUS (straight) 35 cm
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.35m/1.1ft
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.0013043 - Cable LBUS (angled) to LBUS (straight) 80 cm
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.80m/2.6ft
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Arri K2.0041744 - RA-7 Rosette Adapter for ZMU-4
This ARRI RA-7 Rosette Adapter attaches to your ZMU-4 Zoom Control Unit to mount handgrip accessories.
Délai habituel entre 2 et 4 semaines
234,00 CHF HT
252,95 CHF TTC en stock -
Vocas 0500-1201 - MFC-2 Knob standard
MFC-2 Knob standard
Délai habituel entre 2 et 4 semaines
231,86 CHF HT
250,64 CHF TTC en stock -
Arri K2.65012.0 - Cable UMC to Cooke/i
Connects Universal Motor Controllers to Cooke S4i lenses. Length: 0,7m/2.3ft
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Arri K2.0006755 - Cable LBUS 6m/20ft
LBUS cable (Le 4p, Le 4p). Length: 6m/20ft.
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Arri K2.0006757 - Cable LBUS to D-Tap 1.2m/4ft
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 1.2m/4ft.
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Arri K2.0006760 - Cable LBUS to XLR-4 0.8m/2.5ft
LBUS power cable to XLR 4 pin (Le 4p, XLR 4p). Length: 0.8m/2.5ft.
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Arri K2.0006758 - Cable LBUS to D-Tap 0.8m/2.5ft
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 1.2m/4ft.
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Arri K2.0018813 - Cable CAM (7p) - D-Tap (0.5m/1.6ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to D-Tap power source. Length: 0.5m/1.6ft
Délai habituel entre 2 et 4 semaines
224,25 CHF HT
242,41 CHF TTC en stock -
Vocas 0500-1560 - MFC-6 19 mm adapter
MFC-6 19 mm adapter
Délai habituel entre 2 et 4 semaines
215,87 CHF HT
233,36 CHF TTC en stock -
Chrosziel MN-PS - Power supply for MagNum Hand Unit
Power supply for MagNum Hand Unit, cable length 3m with Lemo plug 0B 7pin, incl. Schuko-, UK- and US-adapters
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-DMX-PS - DMX cable
DMX cable length 3m with 5pol XLR plug to MagNum Lemo 0B 7pin and power supply for hand unit
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel AL2-INTF-BCI - Connection cable
Connection cable between ALADIN MKII receiver AUX1 Lemo 10pin to ALADIN Extension Interface Lemo 8 pin and cable w. Hirose 12pin (camera lensport) for analogue iris control
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-RCP-Y - Magnum RCP Connection
Magnum RCP Connection to Sony Cam. and MN-200R
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-ANG - MagNum combined cable
MagNum combined cable: power + control of internal digital F/I/Z motors + Rec. Start/Stop Angenieux Hirose 20pin to MagNum Lemo 0B 9pin (e.g. for Angenieux ASU Optimo)
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-FJNHR20 - MagNum control cable
MagNum control cable for internal servomotors (F/I/Z) at Fujinon digital drive unit Hirose 20pin (incl. Cabrio) - to MagNum Lemo 0B 9pin
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-CT - MagNum Input Y Cable for CineTape
MagNum Input Y Cable for CineTape, 1x 6pin Lemo 2x 5-pole Lemo
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel XLR3-AL2YINTF - Power Y-cable
Power Y-cable 24 V 3pin XLR - Aladin Mrk. II 2pin Lemo & Aladin Interface 5 pin Lemo
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-PMCD - MagNum combined cable
MagNum combined cable: power + control of internal digital focus motor Canon Hirose 20pin - to MagNum Lemo 0B 9pin
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-CASE - Case 390x310x170mm with insert
Case 390x310x170mm with insert for MagNum lens control unit
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Chrosziel MN-ACKIT - MagNum Comfort Accessory KIT
MagNum Comfort Accessory KIT, compr.: SI LED Scale Illumination (also for Aladin MKII / AL2-INTF) MN-HOL belt holder with screw-in bolt MN-BAT rechargeable battery
Délai habituel entre 2 et 4 semaines
214,99 CHF HT
232,40 CHF TTC en stock -
Arri K2.0006759 - Cable LBUS to RS 0.8m/2.5ft
LBUS power cable to Fischer 3 pin (Le f4p, Fi m3p). Length: 0.8m/2.5ft.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri KK.0051709 - Hi-5 Custom Smart Ring Set (5x)
The set of five Hi-5 Custom Smart Rings offers plug-and-play compatibility with the ARRI Hi-5 and Hi-5 SX controller hand units. Use these blank white disks to create custom focus- or iris-pulling marks. Please note that the SX Plus license is required to use the disks with a Hi-5 SX hand unit.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.0034580 - Cable CAM (7p) - LCS (5p) (0.8m/2.6ft)
Connects CAM connector of Radio Interface Adapter RIA-1, cforce mini RF, cmotion cPRO motor and cmotion camin to LCS connector of ARRI ALEXA Plus type cameras. Provides camera REC start/stop, tally, camera setting and status information via Hi-5 hand unit and cmotion cPRO hand unit (license required). Length: 0.8m/2.6ft.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.0002620 - Cable CAM (16p) - F55 (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to Sony F5/F55/Venice and Panasonic Varicam 35 cameras. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft Separate UMC-4 RS IN cable for power supply required.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.0006370 - CLM-5/cforce mini Gear 48p, 60t
CLM-5/cforce mini Gear 48p, 60t for Panavision zoom.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.72116.0 - CLM-4 Gear Setwith modules 0.8 - 0.6 - 0.5 - 0.4
CLM-4 Gear Set with modules 0.8 - 0.6 - 0.5 - 0.4 - Set of gear rings including one metal gear flange.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.0002141 - Cable LCS to LCS (spiral)
Cable LCS to LCS (spiral) - Connects hand unit and motor controller for wired operation.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.0002136 - Cable LCS to LCS (3,5m/11ft)
Cable LCS to LCS (3,5m/11ft) - Connects hand unit and motor controller for wired operation.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.66055.0 - 35 tooth - 32 pitch Module Gear for Panavision Lenses
35 tooth - 32 pitch Module Gear for Panavision Lenses - 10mm face.
Délai habituel entre 2 et 4 semaines
214,50 CHF HT
231,87 CHF TTC en stock -
Arri K2.66130.0 - Friction Gear
Friction Gear - for all Follow Focus units
Délai habituel entre 2 et 4 semaines
209,63 CHF HT
226,61 CHF TTC en stock -
Vocas 0500-1570 - MFC-2 / 6 knob extender
This extender places the focus knob further from the lens. This can help solve problems when another accessory is in the way of the follow focus knob
Délai habituel entre 2 et 4 semaines
208,41 CHF HT
225,29 CHF TTC en stock -
Fujinon CFH-3 - CFH-3 Focus Grip for Professional Remote Lenses
The Fujinon CFH-3 is a manual focus grip designed to work with the MM-01 and MS-01 control kits, in conjunction with the CFC-12-990 flexible cable and FMM manual focus module.
Délai habituel entre 2 et 4 semaines
207,68 CHF HT
224,50 CHF TTC en stock -
Arri K2.0020003 - OCU-1 Rosette Bracket
Compatible with Operator Control Unit OCU-1 (K2.0020002). Includes a ARRI rosette.
Délai habituel entre 2 et 4 semaines
204,75 CHF HT
221,33 CHF TTC en stock -
C-Motion K2.0015754-04 - Cable CAM (7p) - RS 0.8m
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to RS connector. Provides camera RUN/STOP and tally function on ARRI and cmotion cPRO hand units. Works with ALEXA and AMIRA cameras. Length: 0.8m
Délai habituel entre 2 et 4 semaines
204,75 CHF HT
221,33 CHF TTC en stock -
Chrosziel AL2-COFV-CD - Aladin2 Camera Cable on/off Lemo 0B 5pin
Aladin2 Camera Cable on/off Lemo 0B 5pin - Canon Servo-Lenses (HR20 Socket)
Délai habituel entre 2 et 4 semaines
197,44 CHF HT
213,43 CHF TTC en stock -
Arri K2.65063.0 - Cable UMC to Cine Tape Measure
Connects Universal Motor Controllers to Cine Tape Measure.
Délai habituel entre 2 et 4 semaines
195,00 CHF HT
210,80 CHF TTC en stock -
Arri K2.0006754 - Cable LBUS 3m/10ft
LBUS cable (Le 4p, Le 4p). Length: 3m/10ft.
Délai habituel entre 2 et 4 semaines
195,00 CHF HT
210,80 CHF TTC en stock -
Arri K2.0023823 - Cable LBUS Star (0.2m/8in)
LBUS cable distribution plug for additional power source (2x Le 4p female, 1x RS), Length: 0.2m/8in
Délai habituel entre 2 et 4 semaines
195,00 CHF HT
210,80 CHF TTC en stock -
Arri K2.0023832 - Cable CAM (7p, f) - CAM (7p, m) (0.3m/1ft)
CAM cable extension (Le 4p female, Le 4p male). Length: 0.3m/1ft
Délai habituel entre 2 et 4 semaines
195,00 CHF HT
210,80 CHF TTC en stock -
Arri K2.0015756 - Cable CAM (7p) - EXT (6p) (0.6m/2ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to AMIRA and ALEXA Mini EXT connectors. Provides camera RUN/STOP function, tally and camera status information on ARRI and cmotion hand units. Length: 0.6m/2ft
Délai habituel entre 2 et 4 semaines
195,00 CHF HT
210,80 CHF TTC en stock
-
Besoin d'aide,
- GE : + 41 22 561 07 07
- ZH : + 41 43 255 59 00
- TI : + 41 91 985 25 11
Besoin d'un financement,
Appellez-nous !
