Ace Battery Plate Canon LP-E6 / Sony NP-F550
1 pieces in stock
VIA Campus2 PLUS is a simultaneous wired and wireless presentation and collaboration solution that makes it easier to get actual work done during meetings.
VIA Campus2 Wireless Presentation Hub enables wireless streaming at up to 4K UHD resolution via HDMI or DisplayPort connectivity to your displays for smooth, detailed video.
Antenna Array for Bolt 4K RX (Gold-Mount) in Custom Case
Antenna Array for Bolt 4K RX (V-Mount) in Custom Case
The VIA Connect2 enables wired and wireless streaming at up to 4K60 resolution via HDMI input and output to a display for smooth, detailed video.
Antenna Array for Bolt 4K RX (Gold-Mount)
Antenna Array for Bolt 4K RX (V-Mount)
Antenna Array for Bolt 4K V Mount
Usually ships within 2 to 6 weeks
Antenna Array for Bolt 4K Gold Mount
Usually ships within 2 to 6 weeks
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Usually ships within 2 to 6 weeks
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Usually ships within 2 to 6 weeks
This unit features five configurable Ethernet ports and Wi-Fi 6 802.11ax connectivity to connect your IP-enabled cameras, video switchers, and streaming video devices with collaborators and cloud services.
Usually ships within 2 to 6 weeks
VIA GO2 gives iOS, Android, Chromebook, PC, and Mac users instant wireless connectivity with 4K advanced presentation capabilities.
Case XL - Bolt 6 XT TX/4RX and Antenna Array
Usually ships within 2 to 6 weeks
Case XL - Bolt 6 LT TX/4RX and Antenna Array
Usually ships within 2 to 6 weeks
Bolt Sidekick Dual V-Mount Batt.plate 14.4V
Usually ships within 2 to 6 weeks
Large Case for Bolt 6 XT TX and 2 RX
Usually ships within 2 to 6 weeks
Case Large - Bolt 6 LT TX/2RX
Usually ships within 2 to 6 weeks
5GHZ Antenna 14DBI Gain, 40 degrees Horizontal angle, 35 degrees Vertical angle.
Bolt-On Monitor Hinge Cube
Usually ships within 2 to 6 weeks
Teradek Pro Battery Plate 26V, Female Gold-Mount (Bolt Array Antenna)
Usually ships within 2 to 6 weeks
This Single Battery Plate from Teradek enables you to power your Serv 4K, Bolt 4K, or Bolt 6 transmitter or receiver using a long-lasting Gold mount battery, and it also supports Anton/Bauer Gold Mount Plus batteries.
Usually ships within 2 to 6 weeks
This Single Battery Plate from Teradek enables you to power your Serv 4K, Bolt 4K, or Bolt 6 transmitter or receiver using a long-lasting Gold mount battery, and it also supports Anton/Bauer Gold Mount Plus batteries.
Usually ships within 2 to 6 weeks
Bolt 4K V-Mount Battery Plate (Male)
Usually ships within 2 to 6 weeks
Bolt 4K V-Mount Battery Plate (Female)
Usually ships within 2 to 6 weeks
Bolt 4K Gold Mount Battery Plate (Male)
Usually ships within 2 to 6 weeks
The USB to 5pin Control Hub for Smart 7 Monitors is an included piece of our Wireless Camera Control Kit for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Usually ships within 2 to 6 weeks
The Wireless Camera Control Adapters for Bolt 4K are included pieces of Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Usually ships within 2 to 6 weeks
USB to 5pin Adapter for Bolt 4K RX
Usually ships within 2 to 6 weeks
The Teradek USB To 5pin Adapter For Bolt 4K LT TX is included in Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Usually ships within 2 to 6 weeks
The Wireless Camera Control Adapters for Bolt 4K are included pieces of Teradek's Wireless Camera Control Kits for Teradek Bolt 4K and SmallHD Smart 7 monitors.
Usually ships within 2 to 6 weeks
Barrel Antenna V N-type
Usually ships within 2 to 6 weeks
Barrel Antenna H N-type
Usually ships within 2 to 6 weeks
This Teradek 18W AC Adapter Cable can be used with all Teradek Bolt and Cube units. It runs 6 feet long, features a 2-pin LEMO connector on one end, and supports included interchangeable, international AC plugs on the other end.
Usually ships within 2 to 6 weeks
This 2-Pin LEMO to AC Adapter Cable from Teradek is a 6 ft power cable designed for use with the Teradek Cube, Bolt, Bond, and Link.
Usually ships within 2 to 6 weeks
6G V Antenna Kit - 7 Bolt HDMI Upgrade
Usually ships within 2 to 6 weeks
Slot-in adapter for DWX receiver DWR-S03D (25-pin Uni Slot)
Slot-in adapter for DWX receiver DWR-S03D (15-pin Sony Slot)
PTap to 2pin Power Cable (9in/22cm)
Usually ships within 2 to 6 weeks
PTap to 2pin Power Cable (11in/27cm)
Usually ships within 2 to 6 weeks
PTap to 2pin Power Cable for Backpacks (11in/27cm)
Usually ships within 2 to 6 weeks
The 18" 4-Pin LEMO to D-Tap Cable from Teradek can be used to power the Cube encoders or decoders from a D-Tap source.
Usually ships within 2 to 6 weeks
Bolt 4K Antenna Extension Kit
Usually ships within 2 to 6 weeks
The 5pin to 5pin USB Cable is a replacement part for the included cable in Teradek's Wireless Camera Control Starter Kit.
Usually ships within 2 to 6 weeks
5 pin to USB type A 12in Cable
Usually ships within 2 to 6 weeks
5 pin to USB-C 12in Cable
Usually ships within 2 to 6 weeks
5 pin to 4 pin 24in Cable
Usually ships within 2 to 6 weeks
5 pin to 5 pin 24in Cable
Usually ships within 2 to 6 weeks
Prism Mobile Node Bracket Set
Usually ships within 2 to 6 weeks
Bolt 6 Universal Mounting Block
Usually ships within 2 to 6 weeks
Replacement Bolt 4K Wireless Horizontally Polarized Mushroom H Antenna
Usually ships within 2 to 6 weeks
Bolt TX/RX 1000/3000 Accessory Plates Kit with all colors (y/r/g/b)
Usually ships within 2 to 6 weeks
D-Tap to 2-Pin Connector Power Cable (18", Non-Regulated)
The Atom 500 SDI Essentials Kit from Vaxis provides several items designed to complement your Atom 500 SDI wireless video transmission kit. Kit items include a thin BNC cable with two right-angle connectors, a travel case, a 1/4"-20 tilting shoe bracket, and protective skin wraps for both your transmitter and receiver.
BIT-785 Bolt RX 500/1000/3000 Mounting Bracke
Usually ships within 2 to 6 weeks
Bolt 4K Tx Mounting Bracket
Usually ships within 2 to 6 weeks
Use this 18" 12G-SDI UHD 4K Single-Channel BNC Cable from Teradek to send and receive 12G-SDI UHD 4K signals over a single coaxial BNC cable.
Usually ships within 2 to 6 weeks
2pin to Right-Angle Barrel Power Cable (Approx 45cm)
Usually ships within 2 to 6 weeks
RT MDR.X Ext Antenna
Usually ships within 2 to 6 weeks
PTap to Right-Angle Barrel Power Cable 18"
Usually ships within 2 to 6 weeks
900 MHz swivel antenna for RF-900 radio module.
Replacement Wireless Antenna for Beam
Usually ships within 2 to 6 weeks
Replacement Wireless Antenna for Node - Long
Usually ships within 2 to 6 weeks
Replacement Wireless Antenna for Bolt 3000 TX
Usually ships within 2 to 6 weeks
Antenna Cap Replacement - MK3.1 Controller or Receiver
Usually ships within 2 to 6 weeks
When you're on a busy set and need to change settings for a Bolt 6 XT wireless setup on your monitors and cameras, it may get confusing as to which one is which when there is more than one wireless setup.
Usually ships within 2 to 6 weeks
When you're on a busy set and need to change settings for a Bolt 6 LT wireless setup on your monitors and cameras, it may get confusing as to which one is which when there is more than one wireless setup.
Usually ships within 2 to 6 weeks
Antenna Ext 600-6000 Mhz SMA Male (2-Pack) (Prism Mobile)
Usually ships within 2 to 6 weeks
Prism Mobile short Antenna 0.617-3.8ghz SMA (2-Pack)
Usually ships within 2 to 6 weeks
2.4GHz 28.4mm Antenna for CTRL.5 / MDR.S
Usually ships within 2 to 6 weeks
When your DSMC2 module is not in use, fit a Teradek OMOD | AKS MOD GUARD to it using the module's screws to protect the Pogo connection pins.
Usually ships within 2 to 6 weeks
The Vaxis Travel Case is designed to safely store and transport your Atom 500 HDMI wireless video transmission kit.
Mount your ATOM 500 SDI transmitter or receiver onto a shoe mount using this Cold Shoe Mount from Vaxis.
2x Replacement Straight Wireless Antenna for COLR
Usually ships within 2 to 6 weeks
2x Replacement Dual Band Wireless Antenna for Cube
Usually ships within 2 to 6 weeks
2x Replacement Right Angle Wireless Antenna for COLR
Usually ships within 2 to 6 weeks
These flexible bands wrap around the Ultra 7 Bolt 6 receiver monitor and allow you to see the color of the unit and find its paired device. The kit includes one each black, blue, green, red, and yellow band.
Usually ships within 4 to 9 weeks
These flexible bands wrap around the Ultra 7 Bolt 6 transmitter monitor and allow you to see the color of the unit and find its paired device. The kit includes one each black, blue, green, red, and yellow band.
Usually ships within 4 to 9 weeks
Replacement Wireless Antenna for Node - Short
Usually ships within 2 to 6 weeks
Green Identification Plate for Bolt 1000/3000 Receiver
Usually ships within 2 to 6 weeks
The 12" N-Male to RP-SMA Cable from Teradek features an N-type male connector on one end and an RP-SMA connector on the other. Use this cable to connect a Bolt or Beam transmitter or receiver to a Panel Antenna array.
Usually ships within 2 to 6 weeks
Blue Identification Plate for Bolt 1000/3000 Transmitter
Usually ships within 2 to 6 weeks
Blue Identification Plate for Bolt 1000/3000 Receiver
Usually ships within 2 to 6 weeks
Green Identification Plate for Bolt 1000/3000 Transmitter
Usually ships within 2 to 6 weeks
Red Identification Plate for Bolt 1000/3000 Receiver
Usually ships within 2 to 6 weeks
Red Identification Plate for Bolt 1000/3000 Transmitter
Usually ships within 2 to 6 weeks
Yellow Identification Plate for Bolt 1000/3000 Receiver
Usually ships within 2 to 6 weeks
Yellow Identification Plate for Bolt 1000/3000 Transmitter
Usually ships within 2 to 6 weeks
Replacement Wireless Antenna for Bolt 3000 RX
Usually ships within 2 to 6 weeks
This is a single cable that connects to one of the RP-SMA connectors on your TX or RX unit, and the other end connects to one of the panel connectors.
Usually ships within 2 to 6 weeks
When you're on a busy set and need to change settings for a Bolt 6 XT wireless setup for your monitors, it may get confusing which one is which when there are so many wireless setups.
Usually ships within 2 to 6 weeks
This flexible yellow silicone band wraps around the Bolt 6 XT transmitter and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
This flexible yellow silicone band wraps around the Bolt 6 XT transmitter and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
Teradek has devised a clever way of identifying your synced transmitter and receiver set with this blue Color Band to wrap around your transmitter to match its partner on the other end.
Usually ships within 2 to 6 weeks
This flexible red silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
This flexible yellow silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
This flexible green silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
This flexible blue silicone band wraps around the Bolt 6 XT receiver and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks
This flexible red silicone band wraps around the Bolt 6 LT transmitter and allows you to see the color of the unit and find its paired device.
Usually ships within 2 to 6 weeks