38254
New
Send to a friend
Recipient :
* Required fields
or Cancel
Send to a friend
Recipient :
* Required fields
or Cancel
Product Highlights
- For Camcorders and Video DSLRs
- Highly Directive
- Compact Size
- Switchable Low-Cut Filter
- Phantom or Battery Powered
- Low Battery Indicator
- Shockmount for Camera Shoe
- Foam Windshield
- All Metal Housing
overview
The MKE 600 from Sennheiser is a shotgun microphone designed for use with a camcorder or video DSLR. Building on the company's extensive expertise in designing shotgun microphones, it is able to take on even the toughest video sound challenges, while still being compact and short relative to previous models. With its high level of directivity, the microphone focuses on the sounds in front of the camera, while attenuating unwanted sound coming from the sides and rear.
An included foam windshield reduces the effect of wind noise, while a switchable low-cut filter adds additional wind and handling noise attenuation. The MKE 600 can be phantom powered or operated on an AA battery for about 150 hours. An integrated camera shoe and shock mount provides convenient on camera mounting. The rugged and all metal housing means the microphone will function perfectly in outdoor recording situations.
- Flexible use on any camera due to compact form
- Exceptional directivity
- Maximum rejection of side noise
- Switchable low-cut filter
- Phantom or battery powering
- Battery switch with "Low Batt" indicator
- All-metal housing
- Very good suppression of structure-borne noise
- Minimizes wind and handling noise
- Supplied with foam windshield and shock mount
- Effective wind noise suppression with optional blimp
in the box
- Shock Mount for Camera Light-Shoe
- Foam Windshield
- Carry Pouch
|
Specifications |
|
Polar Pattern | - Super-cardioid/Lobar | |
Frequency Response | - 40 Hz to 20 kHz | |
Sensitivity | - -21 mV/Pa with 48V powering - -19 mV/Pa with battery powering |
|
Maximum Sound Pressure Level (SPL) | - 132 dB with 48V powering - 126 dB with battery powering |
|
EIN | - 15 dB(A) with 48V powering - 16 dB(A) with battery powering |
|
Low Frequency Roll-Off | - Yes | |
Power Requirements | - 48V +/-4V (P48, IEC 61938) via XLR-3 or AA size battery/rechargeable battery (1.5/1.2V) | |
Current Consumption | - 4.4 mA with P48 powering | |
Battery Operation Times | - Approximately 150 hours - "Low Batt" Indicator: <1.05V with approximately 8 hours of remaining operating time after initial display |
|
Output Connectors | - 1 x XLR | |
Operating Temperature | - -14°F to +140°F (-10°C to +60°C) | |
Dimensions | - Diameter: 0.8" (20 mm) - Length: 10.1" (256 mm) |
|
Weight | - 4.5 oz (128 g) without battery | |