Yamaha TIO1608-D - Dante-equipped Input/Output rack

Yamaha TIO1608-D - Dante-equipped Input/Output rack

Reference: 167566

Condition: New

Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs.

Manufacturer's price :
1 544,00 CHF (tax excl.)

Visuals price :

1 296,96 CHF

1 402,01 CHF (tax incl.)

Guarantee: Visuals Guarantee 24 Months In-house aftersales service: update, repair and backup.

Availability: 1 piece(s) in stock

Warning: Last item(s) in stock!

- +

SKU: 167566

More information

More info

Yamaha Dante-Equipped Input/Output Rack

Designed to work remotely with Yamaha TF-series consoles, the Tio1608-D is a preamp, I/O rack, and stage box. It uses Dante protocol to transmit multiple channels of audio from the stage to the console over one solitary ethernet cable.

In the purely analog realm, this operation would require a rat's nest of cables or a cumbersome snake; the Tio1608-D's Dante capabilities eliminate the cable clutter. It accomplishes this feat with a low-latency, high-quality transfer of analog signal to digital information—in this case at a sample rate of either 44.1 kHz or 48 kHz, and at a resolution of 24-bit or 32-bit.

This particular stage box provides 16x input channels and 8x output channels for communication via Dante to TF-series consoles; however, you can daisy chain up to three Tio1608-D's simultaneously, resulting in a stage box system of 48x inputs and 24x outputs with one to three cables running to the console, depending on how you rig it.

Front-Panel Overview

The preamp itself sports 16x combo XLR/TRS jacks (all supporting 48V phantom power) and 8x XLR output jacks. A Quick Config switch allows you to interface automatically with TF-series consoles.

Rear-Panel Overview

At the rear of the unit, a fan switch allows you to change the speed of the internal cooling system, while a series of DIP switches determine the unit's startup mode. You'll also notice only two CAT5e connection points: Primary, which is for direct connection to your Dante-enabled console, and Secondary, which is utilized for daisy chaining scenarios.

Features

- Digital stage box for Yamaha TF series consoles

- 16 high-quality mic preamps are controllable from your console

- Connect up to 3 simultaneously for 48 inputs and 24 outputs

	Specifications
	Frequency Response	At a sampling rate of 44.1 kHz or 48 kHz: 20 Hz to 20 kHz, @ 600 Ohms
	Total Harmonic Distortion	At a sample rate of 48 kHz: @ 600 Ohms +4 dBu at 20 Hz to 20 kHz, gain +66 dB: 0.1% +4 dBu at 20 Hz to 20 kHz, gain -6 dB: 0.05%
	Hum and Noise	At a sample rate of 48 kHz: @ 600 Ohms Inputs 1 through 16: -128 dBu, typical All inputs at nominal level, outputs 1 through 8: -70 dBu, max Residual output noise channels 1 through 8: -88 dBu, typical
	Dynamic Range	At a sample rate of 48 kHz: @ 600 Ohms Inputs 1 through 16 / outputs 1 through 8, AD + DA, gain -6 dB: 108 dB Outputs 1 through 8, DA converter: 112 dB
	Crosstalk @ 1 kHz	-100 dB
	Sampling Frequencies	External Clock: 44.1 kHz / 48 kHz, -200 to 200 ppm
	Power Requirements	100 to 240 V, 50/60 Hz, 50 W
	Heat Dissipation	100 to 240 V, 50/60 Hz, 43.5 kcal/h
	Temperature Range	Operating temperature range: 32 to 104°F / 0 to 40°C Storage temperature range: -4 to 140°F / -20 to 60°C
	Cable Length	AC Cable: 7.9' / 2.5 m
	I/O	16x balanced combo XLR/TRS input jacks 8x: Balanced XLR output jacks
	Digital I/O	Connection: etherCON Cat5e Channels: 16x (Tio1608-D to other devices), 8x (other devices to Tio1608-D) Data Length: 24- or 32-bit Format: Dante by Audinate
	Dimensions (W x H x D)	18.9 x 3.5 x 14.3" / 480 x 88 x 364 mm
	Weight	12.6 / 5.7 kg

NEED HELP ?

GE : + 41 22 561 07 07
ZH : + 41 43 255 59 00
TI : + 41 91 985 25 11