Filter
Pocket transmitter with microphone and line inputs and an audio cut-off switch, with a frequency range: B (614-638 MHz)
USB-C microphone with cardioid condenser capsule and integrated features for enhanced Podcasting and Streaming applications.
HSP Essential Omni Micro Replacement Choker
The SL CM SK ceiling mic suspension kit can be used to install the mic from higher ceilings. It consists of 4 steel cables with 16.4ft (5m) length that can be adjusted to an individual installation height.
Antenna wall bracket, metal housing, white, with 2 x 1G9 antennas
Lavalier microphone for SK 100/300/500, cardioid, ew plug, anthracite
Microphone cable with 3-pol Lemo
Rugged microphone button, black
Rugged microphone button, white
Wall mounting bracket for SpeechLine Digital Wireless multichannel receiver
Windscreen
The TCC M SFP-W is the spare front plate for the TeamConnect Ceiling Medium in white.
The TCC M SFP-B is the spare front plate for the TeamConnect Ceiling Medium in black.
Rechargeable Battery for SL 133-S DW and SL 153-S DW Tablestand
Flexible suspension in a very compact design; effectively suppresses the transmission of structure-borne noise.
Support rod with 3/8" thread, 30 cm
MKE 1 accessory kit
RF cable low loss N, 10m
Antenna Cable for SpeechLine Digital Wireless Receiver, 10m
This VESA Mount Kit from Sennheiser is for the TC Bar S/M.
Successor to the popular IE 40 PRO, the red Sennheiser IE 100 PRO In-Ear Monitoring Headphones offer musicians, DJs, and sound engineers an accurate listening experience and high wearing comfort when performing live, producing in the studio, or as an everyday companion.
Straight copper cable with spiral section to eliminate structural noise. Reinforced with aramid for durability and softer armor for added flexibility. XLR-3 and 6.3mm Jack connectors with gold-plated contacts. Compatible with HMD 300 PRO, HMD 301 PRO, HMD / HME 26-II and HMD / HME 27 PRO
Successor to the popular IE 40 PRO, the black Sennheiser IE 100 PRO In-Ear Monitoring Headphones offer musicians, DJs, and sound engineers an accurate listening experience and high wearing comfort when performing live, producing in the studio, or as an everyday companion.
Successor to the popular IE 40 PRO, the clear Sennheiser IE 100 PRO In-Ear Monitoring Headphones offer musicians, DJs, and sound engineers an accurate listening experience and high wearing comfort when performing live, producing in the studio, or as an everyday companion.
Low damping coaxial cable with BNC connector, 50 Ohm, 20m
Bluetooth module for IE 100 PRO, IE 400 PRO and IE 500 PRO in-ear monitors. Includes (1) IE PRO BT Bluetooth connector and (1) USB-A to USB-C charging cable.
Sennheiser MKE 200 Mobile Kit is a comprehensive bundle that features Sennheiser's MKE 200 ultracompact directional microphone, a Manfrotto PIXI mini tripod, a smartphone clamp, two output cables, and outdoor wind protection.
The Boom Arm is specified to hold up to 500g. Microphones include the Profile, MK 4, MK 8, TLM 102, TLM 103, MD 421, and more please note that a shock mount will add additional weight, so be mindful if extending the arm fully.
Copper cable with short coiled part for minimum structure born noise, XLR 5 connector
The HD 25 Light are closed, dynamic headphones for monitoring, recording and outdoor applications. They are extremely comfortable, featuring a minimalistic headband and a unique capsule design, making them an attractive and lower-cost alternative to the HD 25-II. These are also suitable for nightly DJ use.
Evolution Instrumenten Microphone, Supercardioid
Copper cable with short coiled part for minimum structure born noise, XLR 4 female connector
Copper cable with short coiled part for minimum structure born noise, XLR-3 connector and 6,3 mm (1/4") jack plug
15-Pin D-Sub adapter
25-Pin Sub-D adaptateur
Evolution Vocal Microphone, Cardoid
High-performance super-cardioid lead vocal microphone with an extended high-frequency response, specially designed for stage use.
Elastic suspension with open ring - allows the MK 4 to be positioned close to the sound source and prevents vibration.
Support rod with 3/8" thread, 60 cm
Straight Steel Reinforced Cable (3-Pin Lemo, Black)
These are lapel and headworn microphones for use with the G3 series of belt-pack transmitters and capsules for the G3 handheld transmitters.
Dynamic Mic Capsule for Sennheiser SKM2000 Handheld Wireless Systems.
Connection coiled cable with open ends, 3m / 9.84ft. Long
Extension brackets for Ceiling Mic
The SL CM EB 625 extension brackets (4 pcs) shall be used when the TeamConnect Ceiling Mic 2 is installed flush-mounted in a 2.05 feet ceiling grid.
RF cable low loss N, 5m
Remote button for the mute function on the SK 300 G3 transmitter
Windscreen for ME34/35
Windscreen for ME36
Cable II-8, copper cable with short coiled part for minimum structure born noise, unterminated ends
Detachable twisted pair cable for excellent resistance against structure born noise. Made for IE 400 PRO and IE 500 PRO.
Straight copper cable with spiral section to eliminate structural noise. Cable of 1.85 m, bare. Compatible with HMD 300 PRO, HMD 301 PRO, HMD / HME 26-II and HMD / HME 27 PRO
The HD 200 PRO offers powerful and detailed sound for every monitoring task and for every budget. It combines with an efficient ambient noise reduction with a high resolution. Focus on your mix at home, in your studio or during live events.
Transport case with foam for wireless microphone kit
C-IN Cable
DC-Adapter to SK/EK100-500 G2/G3
Evolution Vocal Microphone with Schalter, Cardoid
Earphones 16 Ohm
Connection cable with open ends, 2m, HMD/HME26/46
Shock mount for the MZH goosenecks
Antenna Cable for SpeechLine Digital Wireless Receiver, 5m
This Mount Kit from Sennheiser is for the TC Bar S.
This Mount Kit from Sennheiser is for the TC Bar M.
Low damping coaxial cable with BNC connector, 50 Ohm, 10m
Mini XLR Cable
Miniature clamp, ideal if the microphone is used with a remote cable; 3/8" standard thread.
Antenna Cable for SpeechLine Digital Wireless Receiver, 1m
The TCC M SK Ceiling Mic Suspension kit is for use when installing the TeamConnect Ceiling Medium in high-ceilinged rooms. It consists of three 16.4 ft (5m) steel cables that can be adjusted to fit the required installation height.
Cable set loop for 9046
Blank cover for audio output slot for 9046
Standard clamp, included in the delivery of the MKH 8000 microphones
Windscreen
This is a lapel mic designed to give you Sennheiser-quality sound in an easy-to-use, wallet-friendly form factor.
Charger for BA 70 batteries, 2 locations, can be connected in chain. Includes (1) NT 5-20 UCW power supply
Cable length max 3 m
Ear Pads for HMD/ HME/ HMDC 27
Rackmount Set for the evolution wireless D1 EM stationary receiver.
Windscreen
19" Rackmount Kit from Sennheiser allows you to fix one or two EM-XSW 2 receivers in a single 19" rack space. The unit is extremely robust and easy to install.
Power supply for active antenna splitter EW-D ASA
Low damping coaxial cable with BNC connector, 50 Ohm, 5m
Coaxial cable with BNC connector, 50 Ohm, 10m
The Sennheiser EW-D COLOR CODING SET bundles three packs of 16 color-coded indicators that magnetically attach on EW-D EM receivers, EW-D SK bodypack transmitters, and EW-D SKM handheld transmitters.
Detachable rigid antenna for SK 6212, frequency range: (630-718 MHz)
Replacement cable for IE 400/500 PRO. Black, 1.3 m long with 3.5 mm mini jack plug
Detachable antenna for SK 6212, SK 6000 and SK 9000, frequency range: (630-718 MHz)
Replacement kit of 2 earpieces and 1 shock absorber for HD 300 PRO and HMD 300 PRO
Whether you use computers or mobile devices with a TRRS jack, you'll be able to record yourself simply and effectively with the Sennheiser XS Lav Mobile.
Perfect for mobile journalists, YouTubers, vloggers, and more, the Sennheiser Mobile Kit is designed to provide stable mounting and easy positioning for your smartphone and existing microphone or wireless receiver.
BNC connecting cables for mounting antennas on Sennheiser GA2.
The clear Sennheiser IE PRO Mono is a one-sided mono cable that connects to either the left or right earpiece of an IE 100 PRO, IE 400 PRO, or IE 500 PRO in-ear monitoring headphone.
Rechargeable battery for EW-D SK bodypack and EW-D SKM-S handheld transmitters, Li-ion
Detachable antenna for SK 6000 and SK 9000, frequency range: (630-718 MHz)
Windscreen
The Sennheiser GA 3 Rackmount Kit is ideal for use with G3 100/300/500 Series Wireless Monitoring Systems.
A cable for connecting electric guitars and basses to bodypack transmitters from the SK2000. Instrument cable, 1/4" to 3-pin special connector
Quick release clamp for MD 441
Windscreen
Windscreen for MD 431, anthracite
Vocal microphone, dynamic, cardioid, XLR-3, black, supplied with clip and pouch
Magnet housing set, microphone recording with magnetic disk
Table-mounted socket for MZH goosenecks, 5 pole XLR-F, black
The Sennheiser MKE102/104 Accessory Kit MZ100 is a versatile accessory kit that includes a variety of clips for use with MKE102 and MKE104 lavalier microphones.
Power supply 12V 1A
USB cable for TC Bar S/M, USB 3.1, 3m
Remote control for TC Bar S/M, infrared, 2 AAA batteries
The Sennheiser B 30 is a spare battery sled used to replace a lost or damaged battery holder for the SK D1, SK AVX, and SL bodypack digital transmitters. It houses two AA (1.5V) batteries.
Straight Steel Reinforced Cable (Unterminated, Black)
Coaxial cable with BNC connector, 50 Ohm, 5m
Microphone drum clamp for attaching the e 604 (or earlier BF/MD 504) and the e 904 to a drum.
Microphone horn clamp for attaching the e 908 or the e 608 to the bell of a brass instrument. Clamp is an included accessory of the e 908 B.
Right-Angled Steel Reinforced Cable (Unterminated, Black)
Microphone drum clamp for attaching the e 908 or the e 608 to a drum. Clamp is an included accessory of the e 908 D.
Windscreen for MD441, anthracite
Windscreen for MD 421,anthracite
The MZT 30 is a flush mount with XLR-3 socket which can be used in combination with the XLR-3 goosenecks MZH 3015, MZH 3040 and MZH 3042.
Lavalier Clip for microphone
Antenna mounting kit with two antenna front mount cables including two BNC coupler bulkheads. Includes (1) L 70 USB Charging station and (1) NT 50-20 CW power supply
Power Supply TC Bar S
Power Supply TC Bar M
Cable Lock for TeamConnect Intelligent Speaker Tabletop Installation Kit
Coaxial cable with BNC connector, 50 Ohm, 1m
Replacement cable for HD 25 LIGHT, 1.5m length, with 3.5mm to 6.3mm jack adapter
Soft-sided carrying case for SK 6212, SK 6000, SK 9000. Also suitable for pocket transmitters SK 5212, ew G3 / G4 and 2000 series
The Sennheiser B 10 is a spare battery sled used to replace a lost or damaged battery holder for the SKM D1, SKM AVX, and SL handheld digital transmitters. It houses two AA (1.5V) batteries
Durable table stand with 3/8" and 5/8" mounting options
Hypoallergenic adhesive tape
Windscreen to MK4
Microphone clamp and quick release clamp suitable for: e 606, e 609, e 614 and e 906
Designed for MKE 200, MKE 400 and XS Wireless Digital (RX 35) portable receiver for use with mobile devices
Ear- and Headband Pad HD 280 PRO (2016 Version), HD 280 silver, HMD 280 and HMD 281
Coaxial cable with BNC connector, 50 Ohm, 0.5m
Storage and transport case for HSP 2, HSP 4 and HSP Essential Omni
Ceiling mount black
Ceiling mount white
The Sennheiser CI1 FP is an instrument cable with a 1/8" (3.5mm) mini connection and 1/4" phone connection. The cable adapts guitars and other instruments to freePORT series transmitters for wireless operation.
The black HD 25 Light Cable from Sennheiser is a replacement for the original cable that comes with the Sennheiser HD 25 Light headphones.
Replacement cable for HD26 PRO, HD300 PRO
Connection Cable
Pouch
EW-DP MOUNTING PLATE
Plug-in mains unit with country-specific adaptor for stationary receivers and transmitters of evolution wireless G3 series
HDMI cable for TC Bar S/M, HDMI 2.0, 1.5m
This bracket used to mount the TC ISP to the table serves as a spare in case the bracket supplied with the TC ISP is damaged.
The Sennheiser 12-5 CW+ Universal Power Supply for EW-D EM Wireless Receiver is a universal power supply used to power EW-D EM wireless receivers.
The cable eliminates the need for multiple power cables running to each individual receiver; instead, you can run one cable for the entire system.
Coaxial cable with BNC connector, 50 Ohm, 0.25m
Set of magnetic color identifiers for EW-D SKM. Includes (16) color identifiers
Set of Color Indicators for EW-D SK Bodypack Transmitters
Set of magnetic color identifiers for EW-D EM. Includes (16) color identifiers
3 m USB-C to USB-C cable
Windscreen for fitness microphone HT 747
Directly connect an XSW-D wireless receiver RX 35 to your mobile device's headphone port with the Sennheiser XSW-D Mobile Cable to simplify and improve your sound capture setup on smartphone-based video shoots, vlogs, and more.
Power supply for L 70 charger
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 400 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 400 shotgun microphone.
Perfect for outdoor applications such as video shoots and location recording, the Sennheiser MZH 200 is a furry windshield designed to provide effective protection against wind noise for Sennheiser's MKE 200 shotgun microphone.
Directly connect an MKE 200/400 shotgun microphone or an XSW-D wireless receiver RX 35 to the mic input of your DSLR or mirrorless camera with the Sennheiser CL 35 TRS cable for elevated sound capture quality on video shoots, vlogs, and more.
Directly connect an MKE 200/400 shotgun microphone to the headphone port of your smartphone or tablet with the Sennheiser CL 35 TRRS cable for elevated sound capture quality on video shoots, vlogs, and more.
Replacement headband for HD 25 LIGHT
Shock mount for MKE 600, with vibration and hot shoe adapter, black
Windscreen
Power supply for EW-D receiver
Memory Foam Ear Adapter - Large Size (Blue)
Memory Foam Ear Adapter - Medium Size (Black)
Memory Foam Ear Adapter - Small Size (Red)
EU power cord for TC Bar M, 1.8m
Power Cord EU for TC Bar S
Silicone Ear Adapter - Medium Size (Black)
Silicone Ear Adapter - Small Size (Red)
Silicone Ear Adapter - Large Size (Blue)
XLR unbalanced line output cable for the EK100 (only) with 1/8" (mini) male to XLR male connectors.
Swimming caps (bag of 10)
Temple Pad for HMD 301 PRO headset mono headset
Small frequency cap for SL Headmic 1, gold
Small frequency cap for SL Headmic 1, gray
Large Frequency Cap for SL Headmic 1, Gold
Wide frequency cap for SL Headmic 1, gray
Windscreen foam ME 36
Sennheiser identification rings for SKM hand transmitters of the evolution wireless G3 series.
H-82370 - 1/4" Stereo Phone Screw On Adapter for Sennheiser HD280P Headphones
1 PC Headband Padding Wide For Wearing Splitted Headband As One Piece Headband
Wind- and pop screen for BKE 4-4
HMD 46/ HME 27 - Windscreen
Windscreen large for HME 26
Microphone clamp incl. wing screw to 3/8" and 5/8" thread
Rugged, adjustable microphone clamp for the MD 42, MD 46 and the wired evolution microphone range. The adjustable mic stand adapter holds your mic so you don't have to, freeing your hands and preventing handling noise.
Exchangeable, horizontal clip for SK 6212.
Exchangeable, vertical clip for SK 6212.
Complete set of country adapters for EW-D receiver
Belt clip for EW-D SK bodypack transmitter
Windshield Accessory for Headmic 4 in Beige
Windshield Accessory for Headmic 4 in Black
Belt Clip for XSW IEM EK Receiver
Replacement plate, black (plate on earphone) for HD 300 PRO and HMD 300 PRO
Battery compartment cover for XSW IEM EK receiver
Small Replacement Ear Pads for IE4 In-Ear Monitors - 10-Pack
Medium Replacement Ear Pads for IE4 In-Ear Monitors - 10-Pack
HMD 26 Small Foam mic Windscreen
Camera cap for TC Bar S, magnetic
Camera cap for TC Bar M, magnetic
HZC 08 Cable Clip for HMD 26 and HME 26 Headsets
Compatible with: HD 25, HMEC 25, HME 25, HMEC 25, HD 25-II, HD25, HD25 Light, HD25 Plus
Rubber pads for EW-D EM receiver
Foam Windshield For XS Lavalier Microphones
Cable clamp set for HD 25
1 Pair froam disc for ear pads HD 25