Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
Copper cable with short coiled part for minimum structure born noise, XLR 4 female connector
Copper cable with short coiled part for minimum structure born noise, XLR 5 connector
These balanced siam cables are assembled with two NP3X-BAG Plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
15m ZNK 1/4-SIAM with 2 x CAP3342/2-4
24" Low-Profile LPXLR-3F to LPS TA3F cable, Black Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Red Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Black Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Green Caps
24" Low-Profile XLR 3-pin cable, Multi-position right angle connectors adjustable from 3 o'clock or 9 o'clock, XLR-3F to XLR-3M (AX3F to AX3M), 3.2mm diam. cable, Blue Caps
18" Low-Profile XLR 3-pin cable, Multi-position side cable-exit connectors, XLR-F to XLR-M
24" Low-Profile LPXLR-3F to LPS TA3F cable, Red Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Red Caps
24" Low-Profile LPXLR-3F to LPS TA3F cable, Green Caps
24" Low-Profile LPXLR-3F to LPS TA3F cable, Blue Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Black Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Green Caps
24" Low-Profile LPS TA3F to LPXLR-3M cable, Blue Caps
10Ft premium microphone cable - Canare L4E6S cable - Neutrik XX Series XLR 3-pin connectors - Black - gold pins
24 inches XLR-3F to TA5F cable for balanced MIC level signals into Lectrosonics Legacy or Servo-Bias input transmitters
24 inches XLR-3F to TA5F cable for balanced LINE level signals into Lectrosonics Legacy or Servo-Bias input transmitters
Speaker cable ZNK 2/9 (2 x 2,5 mm2), black, NP2C-Neutrik-Plug mono on each side
SONY Microphone Cable 3-Pol XLR female to 5-Pol XLR male
This balanced microphone cable is assembled with a male XLR NC3MXX-BAG to a REAN mini-plug NYS231BG. The cable and boots are black.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Black speaker cables (ZNK 2/9, 2 x 2.5 mm2) with 2-pole, right-angled 6.35 mm Neutrik phone plugs NP2RX-BAG on both sides, with nickel-plated contacts.
Connecting cable for DT 190 and DT 290 series with 5-pin XLR male, 1.5m length.
Connection cable with 3 pin XLRm and 6.3mm stereo jack plug, 3.0m for: DT280 / DT287 / DT290 / DT297 / DT190 / DT291
Round panel flange for D-Series
1m audio cable with ALEXA Mini LF 6-pin audio connector on one end and open leads at the other.
Dual audio input adapter cable with a single 5 pin male XLR to dual 3 pin female XLR connectors, 50 cm / 1.6 inches
Dual audio output adapter cable with a single 5 pin female XLR to dual 3 pin male XLR connectors, 50 cm / 1.6 inches
These black stereo cables are assembled with the ZNK 1/4-Siam and the original connectors, 2x NP2X-BAG mono plugs to 2x right-angled NP2RX-BAG mono plugs.
Hirose 4-pin Connector
Lieferzeit binnen 4 Wochen
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
18" Low-Profile LPS TA3F to TA3F cable, Yellow Caps
18" Low-Profile LPS TA3F to TA3F cable, Black Caps
18" Low-Profile LPS TA3F to TA3F cable, Red Caps
18" Low-Profile LPS TA3F to TA3F cable, Green Caps
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
10m ZNK 1/4-SIAM with 2xCAP3342/2-4
Black, balanced stereo microphone cable (ZNK 4/6-STARQUAD) with female XLR NC5FXX-BAG to male XLR NC5MXX-BAG, the boots are black.
Kramer's Hydra multi-head cables contain a 15-pin HD (M), 3.5mm (M) & 3 RCA (M) cables. They are designed for applications that require multiple signals in a single jacket.
Designed for use with small and medium Cyclone windshields, this 10.2" Rycote 3-Pin XLR Male to Right-Angled 3-Pin XLR Female Cable allows you to use these windshield models with a wide range of shotgun microphones.
Lieferzeit binnen 4 bis 5 Wochen
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
Black, unbalanced Premium microphone cable (ZNK 2/7, Swissflex Premium) with 3-pole XLR female cable connector NC3FXX-B (gold-plated contacts) to 2-pole plug NP2X-B (gold-plated contacts), both with black bushings.
Black, balanced Premium microphone cable (ZNKP 2/7, 2 x 0.5 mm2, Swissflex) with 3-pole XLR female cable connector NC3FXX-B to XLR male cable connector NC3MXX-B, both with gold-plated contacts and black bushings.
The black MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
The white MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
Black stereo phono-plug cable assembled with 2x phono to 2x plug. One channels is marked red.
RF cable low loss N, 5m
5m extension coax cable with SMA male connectors
Black balanced microphone cable (ZNK 2/6D) with double shield and special EMC connector for ideal protection against high frequency interferences, assembled with XLR female NC3FXX-EMC to male NC3MXX-EMC.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
Hand tool to hold the barrel of the PX series while the boot is tightened. With the HTXP the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.
Black, balanced microphone cable (ZNK 2/6-BL, Swissflex) with 3-pole XLR female cable connector NC3FXX-BAG to 3-pole XLR male cable connector NC3MXX-BAG, both with silver-plated contacts and black bushings.
Black 3-pole cable with 110 Ohms, for AES/EBU or DMX, assembled with 1x REAN XLR female cable connector to a REAN XLR male cable connector, both with gold-plated contacts. The cable comes with transparent shrink tubes on both sides ton enhance individual labelling.
These Premium instrument cables were assembled with ZNKP 1/7 MKII black and with NP2X-B to NP2X-AU-SILENT. The boots are available in black.
These balanced siam cables are assembled with two NP3X-BAG Plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
Connection cable with 4 pin XLRf (Riedel / ASL Intercom), 1.5m for: DT280 / DT287 / DT290 / DT297 / DT190 / DT291
Audio Cord, XLR3 (F) - XLR3 (M), Neutrik Blk - 25m
Cover plate for cable reel KTGT310.OF with 8x cut-outs for D-series chassis connectors and one cut-out for multipin connectors with 13 to 19 pins.
Ideal cable to to connecto Notebooks, MP3-players or smartphones to an existing sound system or mixing console. Black instrument cable ZNK 1/4-SIAM assembled with a 3 pole Mini-Plug stereo 3.5 mm NYS231BG-LL to 2 x Phono (RCA) NF2CL/2.
Speaker cable, black (ZNK 2/9, 2 x 2,5 mm2) with NC3FXX-BAG to NC3MXX-BAG.
Kramers GMA series are high-performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations that require an audio signal as well.
Phono cable ZNK 1/4-Siam, black, assembled with 2x NF2CL/2 Phono (RCA) plus one channel marked red.
A funny phono cable in a retro look. This cable has a black-grey stain-resistant synthetical coating. It is assembled with a couple of phono connectors CAP3342/2-6 on both sides.
Stereo cable assembled with 2x phono plugs (RCA) on each side, with gold-plated contacts (ex RCC*CC).
Black stereo phono-plug cable assembled with 2x phono to 2x plug. One channels is marked red.
Black stereo cable ZNK 1/4-SIAM assembled with 2 x phono plugs CAP3342/2-4 with gold-plated lamellar contacts to 2 x Neutrik XLR female cable connectors NC3FXX with silver-plated contacts. One channel has a red marking for better stereo differentiation.
Kramers MGMA series are micro sized high-performance cables for computer graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both ends.
These black stereo cables are assembled with the ZNK 1/4-Siam and the original connectors, 2x NP2X-BAG mono plugs to 2x right-angled NP2RX-BAG mono plugs.
Black stereo cable ZNK 1/4-SIAM, assembled with 2 x phono plugs CAP3342/2-4 with gold-plated contacts to 2 x Neutrik XLR male cable connectors NC3MXX with silver-plated contacts. In each case one channel has a red marking for better stereo differentiation.
Cable II-8, copper cable with short coiled part for minimum structure born noise, unterminated ends
C-IN Cable
Detachable twisted pair cable for excellent resistance against structure born noise. Made for IE 400 PRO and IE 500 PRO.
Low damping coaxial cable with BNC connector, 50 Ohm, 10m
Felxible short cables for TM2 (A2DC), (Pair)
Lieferzeit 4 Wochen
Black microphone monosplit cable, made of a bantam cable (ZNK 2/4-BL, Swissflex, 2x0.22 mm2), assembled with one 3 pole XLR female cable connector (NC3FXX) with a white bushing, transparent labeling ring and with silver-plated contacts to a 3 pole mini plug 3.5 mm (NTP3RC), with nickel-plated contacts. Both connectors have a nickel housing.
Heavy-duty, miniature microphone cable, 2.2 mm diameter, MicroDot connector, 5m.
The white MicroDot Extension Cable from DPA features a MicroDot connector on one end and a MicroDot connector on the other.
This digital balanced microphone cable (ZNK CT2963501 Micro Indoor AES/EBU 2 x 0.22 mm2) is assembled with NC3FXX-BAG to NC3MXX-BAG. The cable and boots are black. The connectors are marked with a transparent coding ring and are labelled "AES/EBU" for better distinction.
These balanced siam cables are assembled with two NP3X-BAG plugs on each side. The cable (2 x 0.22 mm2) and boots are black.
This balanced stereo microphone cable is assembled with ZNK 2/6-black and has NP3X-BAG plug on each side. The boots are black
Cover plate 8xD-cutout / GT450
Speaker cable ZNK 2/9 (2 x 2,5 mm2) black, Speakon NL4FX on each side
This balanced microphone cable (ZNK 2/6-BL) is assembled with NC3FXX-BAG to NC3MXX-BAG. The available boots are yellow.
3m extension coax cable with SMA male connectors
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
This balanced microphone cable is assembled with NC3FXX-BAG to NP3X-BAG. The cable and boots are black.
Speaker cable ZNK 2/9 (2x2.5 mm2) black, NP2C-Plug mono to Speakon NL4FX.
These Premium instrument cables were assembled with the black ZNKP 1/7 and with NP2X-B to NP2RX-AU-SILENT. The boots are available in black.
This balanced microphone cable is assembled with NC3MXX-BAG to NP3X-BAG. The boots are black.
These stereo cables were assembled with the black ZNK 1/4-SIAM and Neutrik's NP2X-BAG twice on each side.
Black speaker cable (ZNK CT2988800, 2 x 1.5 mm2) with 2-pole 6.35 mm phone plugs (NP2X-BAG) on both sides, with nickel-plated contacts.
Speaker cable ZNK 2/9 (2 x 2,5 mm2), black, NP2C-Neutrik-Plug mono on each side
These Premium instrument cables were assembled with ZNKP 1/7 MKII and with NP2X-B to NP2RX-B. The boots are available in black.