Plug-in mains unit with country-specific adapter for antenna splitter ASA 1 and charger L 2015
1 Stück auf Lager
Charging Adapter for Hand-held transmitter to L2015
3 Stück auf Lager
Power Supply 5V DC/1.0A (H4nSP, H4n, Q3HD, R16, R24)
9 Stück auf Lager
The L 2021-40 19" charger rack has been specially designed for stationary applications. It holds up to 40 receivers that will automatically quick-charge
19 inch rackmount Redundant Power Center. PD-4A Center is specifically designed to provide a steady power supply for Datavideo mobile studio applications. With two AC power supplies - the PD-4 will still supply energy to your devices - even if one power source fails. Two year warranty after registration on Datavideo's official website.
Lieferzeit binnen 3 bis 4 Wochen
Redundant power supply for VS-3232DN & VS-6464DN frame
Redundant power supply for VS-3232DN & VS-6464DN frame
The Neumann MN V Pattern Control Unit is a replacement power supply for the M 49 V large-diaphragm tube condenser microphone.
PD-6A is a 19" rack mountable universal AC to DC power distribution center. Designed to supply steady and sequenced voltage for production kit whilst on location or in your studio. The PD-6A supplies a steady 48 volt. Related products for 48V are: DC/DC converter DDC-4012H code 2600-3011, CB-22 H cable 30 mtr. Code 2200-9882, CB-23 H Cable 50 mtr. Code...
Lieferzeit binnen 3 bis 4 Wochen
The N 149 A power supply generates the necessary operating voltages for M 147 Tube, M 149 Tube or M150 Tube microphones. It operates with all mains voltages from 100 V to 240 V, 50 or 60 Hz. Mains power is connected through a standard IEC 320 socket. The microphone connects via an DIN-8 connector
PD-2A Power Distributor It provides 400 watt rated power supply to cover most power requirments. Two year warranty after registration on Datavideo's official website.
Lieferzeit binnen 3 bis 4 Wochen
L 6000 expands the Digital 6000 and Digital 9000 series with a practical and intelligent charging station. Up to four modules can be fitted as needed with two charging ports each for bodypack or handheld transmitter batteries
SMP&MP-XX-1RU Redundant Power Frame (PWR-03)
The VA-102P5 is a 5-output power supply that powers 5V DC powered devices. The VA-101P5 can supply a maximum of 1.8A of current to each of five devices for a total of 9A. The power supply is especially useful in high-population installations for saving space and eliminating a large number of 5V DC power adapters.
The VA-102P12 is a 10-output power supply that powers 12V DC powered devices. The VA-101P12 can supply a maximum of 1A of current to each of ten devices for a total of 10A. The power supply is especially useful in high-population installations for saving space and eliminating a large number of 12V DC power adapters.
6 Way +48V Phantom Power Supply
AVN Hot Swappable PSU, 60W, For AVN-PX8x4/C
The N 248 supplies one stereo microphone, or two mono condenser microphones with 48 V phantom power (P48). All connectors are of XLR 3 type. The audio signal outputs are DC-free. The 5 directional patterns of the TLM 170 R can be remote controlled with rotary switches
Charge up to eight wireless microphones for your ADECIA conferencing system at the same time with the Yamaha RM-WCH8. The charger works with the RM-WDR and RM-WOM boundary mics as well as the RM-WGL and RM-WGS gooseneck mics.
Distributes power and data over long distances to multiple ARC Wall Panels via eight RJ-45 connectors. Versatile half-rack design for mounting in optional 1U rack tray or surface mount with optional bracket. Compatibility with off-the-shelf CAT5/6 cable and RJ-45 connectors reduces installation time and materials costs.
Optional External Power Supply Link Cable for PW800W - length 1.2m
The RU-TPS4A is a four output audio sender, signal and power distributor module compatible with RDL Format-A twisted pair products. Three line-level sources may be connected to the module using the +4dBu balanced detachable terminal block. A bank of studio-quality buffer amplifiers feed the three pairs of the four rear-panel RJ45 OUTPUT jacks at the...
The RU-TPDA Active Distributor is a four output signal and power distributor module compatible with RDL Format-A twisted pair products. The Input RJ45 jack accepts a twisted pair cable originating from one or multiple Format-A senders. The Loop Out connector permits the input signal to daisy-chain to additional distributor modules.
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones. Two identical circuits are provided, with connections through XLR jacks.
The FP-DCC1 is a compact 12VDC to 24VDC power converter that allows you to power 24VDC devices with a 12VDC source. The compact metal design features ground-referenced terminal block and DC jack power outputs with 2 separate advantages. The DC jack and one terminal block are high-current outputs, while the other terminal block is a low-noise output.
The Sennheiser CHG 70N + PSU KIT is a network-enabled charger with two bays, capable of simultaneously charging up to two EW-DX SKM handheld and/or EW-DX SK bodypack transmitters with their respective BA 70 batteries inside.
The FP-TP4PW 4 Output Power Inserter is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 VDC power supply using either the power jack or the detachable terminal block. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules...
Intercom Power Supply for Basic Systems
Network compatible charger with two individual charging compartments. Compatible with EW-DX SKM, SK, BA 70. Includes CHG 70N-C, quick start guide, safety instructions.
Charger for 4 beltpack series 200
Charger for 4 beltpack series 210 (USB)
Introducing the SPD-1 Power Distribution Box, the perfect solution for managing power in a sound bag or on a sound cart. This powerful and versatile device is designed to make your life on set easy and stress-free.
The ST-MPA48 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. Therefore, the ST-MPA48 can convert any existing mic input...
The TX-PD8X is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to eight modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current capacitive load is connected.
The FP-TP4PW 4 Output Power Inserter is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 VDC power supply using either the power jack or the detachable terminal block. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers.
The GB6 Ground Bar from RDL is a small metal bar designed to ground equipment. It is constructed from alloy copper and can be used to mount up to (6) TS-1D suppressors. Use this unit to protect your equipment from electrostatic discharge, induced transient voltage, RF interference, and electromagnetic pulses.
2-bay table top charger with power supply for the evolution wireless D1 series.
The EZ-PD3 Power Supply Distributor from RDL is used where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to three EZ modules from a single power supply. Upon application of power, the EZ-PD3 ramps the voltage up, charging any load capacitance as quickly as possible, then switching full voltage...
DQC2 Dual Charger
The ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. There is no voltage on the mic output terminals.
6 x powerCON TRUE1 TOP and powerCON TRUE1 TOP In with IP65 Power Strip XO
The S 95 is an intelligent lithium battery that Deity specially developed for the reliable power supply of sound recorders. It works reliably in a wide range of environments and conditions.
The ST-PD5U Switching Supply Distributor is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to five modules from a single power supply. The current limiting circuitry in many switching power supplies will cause the supply to shut down upon power-up when a high current...
Rechargeable Lithium ion battery pack for STAGEPAS 200.
Charging unit for Evo G2/G3/2000
Microphone Charger Base for Dual Channel Executive HD System
Docking station for charger L 6000, usable for 2x BA 70
Charging kit for EW-D. Includes (1) L 70 USB charger, (2) BA 70 rechargeable batteries and (1) NT 5-20 UCW power supply
Plug-in mains unit with country-specific adapter for antenna combiner AC 3 and charger L 2015
Charging module for two BA 60 battery packs for SKM 9000 and SKM 6000
Charging module for two BA 61 battery packs for SK 9000 and SK 6000
Charger Base for HD Single Channel
12VDC 2A Power Supply With 2.5mm Locking Plug (AVN-GPIO)
The Deity 140W GaN Pro Charger Kit is a state-of-the-art charging solution designed to deliver unmatched power and efficiency for your devices. Featuring advanced third-generation gallium nitride (GaN) technology, this charger offers a maximum output of 140W from a single port, making it the ideal choice for professionals who need fast and reliable...
Desk top wireless charging device
Power Supply for HD Single/Dual Base Station or Charger Base
The PS-1202 is a desktop power supply that provides 12V DC, 2A power to compatible devices.
The PS-504 is a desktop power supply that provides 5V DC, 4A to compatible devices.
Deity's DQC-1 charger is designed to charge smart batteries (SMBUS) using any standard USB charger. The very small, easy-to-use smart battery unit is protected by a robust, durable metal housing. In addition to a 5-pin battery connector, the device offers a USB-C port with 45W fast charging and supports mainstream protocols.
Desk top wireless charging device
Mackie M48 is a phantom power supply designed to provide 48 VDC phantom power to a single microphone for musicians, producers, and audio engineers in live stage applications and home, project, and mobile-recording studios
Lieferzeit binnen 2 bis 3 Wochen
24 Vdc Switching Power Supply, Interchangeable AC Plug, 1 A, dc Plug
Keep your Wireless GO II microphone system safe and fully powered with the Wireless GO II Charging Case from RODE, a handy accessory that features a rechargeable internal battery that can facilitate up to two full recharges for up to 30 hours of continuous use in the field.
Desk top wireless charging device
Desk top wireless charging device
Desk top wireless charging device
Charger for BA 70 batteries, 2 locations, can be connected in chain. Includes (1) NT 5-20 UCW power supply
The Sennheiser Profile Wireless Replacement Charging Bar is a dual-function piece for use with the ultracompact Profile wireless microphone system.
12V DC/2A Open Head Power Supply
24 Vdc Switching Power Supply, Interchangeable AC Plug, 500 mA, dc Plug
Replacement Battery
Rechargeable battery for EW-D SK bodypack and EW-D SKM-S handheld transmitters, Li-ion
Power supply for active antenna splitter EW-D ASA
Deity FB-NP-F550-DT Rechargeable Battery.
Lockable Power Supply 12V DC for R20
Power supply 12V 1A
HD Field Replaceable Microphone Battery for HD Microphones
Power Supply TC Bar M
Power Supply TC Bar S
Power Supply 12V AC/2.0A (F8, UAC-8, TAC-8)
Power Supply 9V DC/0.5A (RT-223, G2nu, G2.1nu)
Plug-in mains unit with country-specific adaptor for stationary receivers and transmitters of evolution wireless G3 series
Power supply for EW-D receiver
Power supply for L 70 charger
The cable eliminates the need for multiple power cables running to each individual receiver; instead, you can run one cable for the entire system.
The Sennheiser 12-5 CW+ Universal Power Supply for EW-D EM Wireless Receiver is a universal power supply used to power EW-D EM wireless receivers.
Power Supply USB 5V DC/1.0A (H6,H5,H1,H2n,R8,Q2n)
EU power cord for TC Bar M, 1.8m
Power Cord EU for TC Bar S
Coupling T23 black 11.5mm
Power clutch T13 black
Connector T23 black 11.5mm
Plug T12 black