Complete set with 1 x RMCR, 1 x RMCGWH (white), 2 x VXL1W16P (white) PoE line array speakers, 1 x SWR2311P10G PoE switch
Sound system for integration into media boards with 2x MT-05.01 loudspeaker units, MA-4.100 DSP-amplifier with pre-programmed user presets, 1x pre-assembled cable set
The PGM1is a paging station microphone that can be used with the MTX5-D or MRX7-D. PGM1 can be networked via a Dante network and PoE (Power over Ethernet).
The RU-BNFP is equipped for PoE which powers the RU-BNF, Format-A senders connected to the Format-A input, and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-BNFP if an external 24 Vdc...
The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The FP-NML2VP is equipped to operate from a PoE enabled network switch. The FP-NML2VP will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2VP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
The RU-SM16D 4-Channel Audio Meter is a 1RU 1/3 rack module designed for precise metering of up to 4 channels of audio. The unit can be used for either 4 channels of mono metering or dual-stereo operation and is designed to be integrated into new and existing setups.
The FP-NML2V modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
The FP-NML2P is equipped to operate from a PoE enabled network switch. The FP-NML2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the...
The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
PAGING STATION EXTENSION that can be used with PGM1
The FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the front-panel START button. The message may also be played back periodically using the interval timer included in the FP-MR2
The RU-SM16A 2-Channel Audio Meter is a 1RU 1/3 rack module designed for precise metering of up to 2 channels of audio. The unit can be used for either 2 channels of mono metering or stereo operation and is designed to be integrated into new and existing setups.
The ST-VP2 Automatic Ducking Module is a device designed to cut out music when a page is played over your audio system and automatically fade the music back into play when the page is finished. Use of the unit requires a line-level music source from a receiver, satellite decoder, tape, or CD source.
The ST-VP1 Voice-Over & Paging Module is a device that allows you to do voice-over paging with controls for fade and cut. It allows you to choose between (2) input audio sources. The unit is also well suited for voice-overs that require precise and consistent fade levels. This model can be configured for automatic operation when used in conjunction...
The TX-PCR1 Paging Controlled Relay is ideal for local speaker muting during an area page and can be used for controlled switching of constant-voltage audio sources. The detachable terminal block has inputs for 25, 70, or 100V systems. The Slave output can be used to control other modules or the DPDT relay can switch speaker loads.
The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines. Single or multiple units are typically mounted to good earth ground at the location that audio lines enter or exit an equipment rack. This protects wiring inside the rack against the effects of induced electrostatic discharge (ESD),...
The TX-PSD1 Paging Sound Detector is ideal for switching sources from within a constant-voltage system. This module is triggered when the threshold is exceeded and can remain open for 3-25 seconds (user programmable).
The ST-FS6 is used in applications where an excessive RF level is induced in the audio cables producing audio interference in the system. It is not necessary to use all 6 input/ output channels, and wiring configurations may vary according to the application.
Rack for SWR2100P and SWR2311P series