Multidyne 4 channels 3G-SDI TX + RX kit over Single Mode FiberIdeal for HDC-P50. Includes Transmitter & Receiver units with with 4x 3G-SDIVideo Inputs (Tx) & output (Rx), Genlock/Sync Output (Tx) & input (Rx) and 1x Gigabit Ethernet. Singlemode fiber operation with ST connector
Multidyne 2 channels 3G-SDI TX + RX kit over Single Mode Fiber.Ideal for HDC-P1, BRC-X400, BRC-H800, BRC-X1000, BRC-H900. Includes Transmitter & Receiver units with with 2x 3G-SDIVideo Inputs (Tx) & output (Rx), Genlock/Sync Output (Tx) & input (Rx) and 1x Gigabit Ethernet. Singlemode fiber operation with ST connector
Kramer module with 2 optical inputs for HDMI and RS-232 signal transmission, compatible with SFP+ modules. OSP-MM1 modules are supplied as a kit, support 4K60 4:2:0
60 4:4:4 HDMI Over Ultra-reach MM/SM Fiber Optic Output Card
Fiber system 2 transmitter, HDCP and EDID
12 Channel Dante Enabled Analog Audio Input Expander. Affordable analog audio input (A/D) expander capitalizes on the surplus DSP resources of Radius NX, Radius, Edge, and Prism DSPs to bring overall system costs down. 12 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Radius, Edge and Prism DSPs.
This Kramer F676-IN2-F16/STANDALONE 4K60 4:4:4 HDMI over Ultra Reach MM/SM Fiber Optic Input Card is a high-performance HDMI fiber optic modular matrix input card for ultra-reach extension of 4K@60Hz (4:2:0) HDMI signals.
Plug & Play receiver, DVI HDMI extender as optimised version for 50/125 multimode fiber, over one fiber (2x DVI Out).
Plug & Play receiver, DVI HDMI extender as optimised version for 50/125 multimode fiber, over one fiber (2x DVI Out).
Plug & Play transmitter, DVI HDMI extender as optimised version for 50/125 multimode fiber, over one fiber (2x DVI In).
Plug & Play transmitter, DVI HDMI extender as optimised version for 50/125 multimode fiber, over one fiber (2x DVI In).
The NX-DVI-D-BXQ48 is a single fiber optical DVI/HDMI extender set, with an operating distance up to 800 meters (or even more). It just extends DVI/HDMI signals up to 1920 x 1200 pixels using optical signals transmitted without signal degradation, without compression and without delay.
7+1-Output Transmitter: HDMI ver1.4a over Single Cat.5e/6 with 7 Cat 5e/6 Outputs Max Distance: 60M (196 ft). Input: HDMI. Outputs: 7 HDbaseT Outputs, 1x HDMI Loop out
Lieferzeit binnen 2 bis 3 Wochen
4 Channel HDBaseT converter (UHD/4K)
Lieferzeit binnen 3 bis 4 Wochen
12 Channel Analog Output Expander, 12 Channel Dante Receive. For Use with Dante-Enabled Symetrix DSPs. Software Controlled- No Mechanical Switches or Circuit Board Jumpers. Low Cost Solution
Stand Alone Robotic Camera Interface - Remote Camera End. For use with singlemode fibre networks. Provides an HD-SDI signal from a Panasonic AW-HE60 camera with a 10/100 Ethernet port on 2 fibres with LC connectors. Supplied in moulded black enclosure with a mounting plate to allow the camera and fibre interface to be directly fitted together and wall...
Lieferzeit binnen 2 bis 3 Wochen
Stand Alone Robotic Camera Interface - Remote Camera End. For use with singlemode fibre networks. Provides an HD-SDI signal from a Panasonic AW-HE60 camera with a 10/100 Ethernet port on 2 fibres with LC connectors. Supplied in moulded white enclosure with a mounting plate to allow the camera and fibre interface to be directly fitted together and wall...
Lieferzeit binnen 2 bis 3 Wochen
Stand Alone Robotic Camera Interface - Remote Camera End. For use with singlemode fibre networks. Provides an HD-SDI signal from a Panasonic AW-HE120/130 camera with a 10/100 Ethernet port on 2 fibres with LC connectors. Supplied in moulded black enclosure with a mounting plate to allow the camera and fibre interface to be directly fitted together and...
Lieferzeit binnen 2 bis 3 Wochen
Stand Alone Robotic Camera Interface - Remote Camera End. For use with singlemode fibre networks. Provides an HD-SDI signal from a Panasonic AW-HE120/130 camera with a 10/100 Ethernet port on 2 fibres with LC connectors. Supplied in moulded white enclosure with a mounting plate to allow the camera and fibre interface to be directly fitted together and...
Lieferzeit binnen 2 bis 3 Wochen
Connex receiver, HDMI 2.0 and network extender, optimised version NO2 50/125 multimode over two fibers.
Connex transmitter, HDMI 2.0 and network extender, optimised version NO2 50/125 multimode over two fibers.
Robust fiber optic transmitter with DisplayPort 1.2 connector transfers uncompressed UHD signals and native 4K. The colour subsampling of 4:4:4 reaches up to 300 m over multimode 50/125 OM3 cables with only one fiber. With integrated power supply, LED display.
Robust fiber optic receiver with DisplayPort 1.2 connector transfers uncompressed UHD signals and native 4K. The colour subsampling of 4:4:4 reaches up to 300 m over multimode 50/125 OM3 cables with only one fiber. With integrated power supply, LED display.
Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance 4K KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution.
4 Channel Dante Enabled Analog In/Out Expander. Audio input (A/D), output (D/A) expander for Symetrix systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring overall system costs down. 4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Radius NX,...
Fibre System transmitter, HDCP, EDID, Network
Fibre System receiver, HDCP, EDID, Network
Extender 1x HDMI2.0 4K/60Hz Out, NO2 A 50/125
Extender 1x HDMI2.0 4K/60Hz In, NO2 B 50/125
Robust fiber optic receiver with Neutrik connectors, DisplayPort 1.2 connector transfers uncompressed UHD signals and native 4K. The colour subsampling of 4:4:4 reaches up to 300 m over multimode 50/125 OM3 cables with only one fiber.
Robust fiber optic transmitter with Neutrik connectors, with DisplayPort 1.2 connector transfers uncompressed UHD signals and native 4K. The colour subsampling of 4:4:4 reaches up to 300 m over multimode 50/125 OM3 cables with only one fiber. With integrated power supply, LED display.
ADDERLink XD522 (XD522-DP-PAIR) is a high performance Dual-monitor DisplayPort KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the same user desktop experience.
Quad-head KVM extender - High definition video, USB2.0 and audio
Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance 4K KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution.
HDMI2.0,4x4Matrix, AudioOut, Redesigned Vers.
AdderLink XD150FX Dual-Link DVI/USB Fibre Optic Extender with UK mains lead
675T converts the HDMI input signal to an optical signal that is transmitted over a fiber optic cable to 675R, which converts it back to an HDMI signal.
4K HDMI fibre extender set. Includes TX and RX pair over Duplex LC SM fibre.Supports HDMI v2.0a. Includes Power supplies.
Lieferzeit binnen 2 bis 3 Wochen
4 Channel Dante Enabled Analog Audio Input / Output Expander. Designed for use with Symetrix Dante-enabled DSPs as a low cost way to increase system analog input (A to D) and output (D to A) capacity. Composer software setup and control eliminates switches, circuit board jumpers, mechanical adjustments or the need for third-party software
AdderLink XD - Single HD/MST Dual HD Extender Pair with UK mains cables
Fibre System transmitter, HDCP and EDID
Fiber Optic System Receiver, HDCP and EDID
4K Auto-Switcher/Scaler Kit over Long-Reach HDBaseT - with white EU (80mm) and UK (86mm) size wall-plate frame
The KIT-400T transmitter converts the user-selected input signal into the transmitted HDBaseT signal.
4 Channel Dante Enabled Analog Audio Input Expander. Designed for use with Symetrix Dante-enabled DSPs as a low cost way to increase system analog input (A to D) capacity. Composer software setup and control eliminates switches, circuit board jumpers, mechanical adjustments or the need for third-party software
AdderLink XDVI. USB & Dual Head Single Link DVI KVMA CATx Extender 50 Mtr
AdderLink XUSBPRO. Transparent USB & Dual Head VGA KVMA CATx Extender 300 Mtr
Plug & Play transmitter, DVI-Extender, optimized version for 50/125 multimode fiber, over one fiber.
Plug & Play receiver, DVI extender as optimised version for 50/125 multimode fiber, over one fiber.
VP-427X2 is a high-performance auto-switcher/scaler receiver with 2 HDBaseT inputs and a local HDMI input for 4K HDMI over extended-reach HDBaseT.
AdderLink XD150FX Dual-Link DVI/USB Fibre Optic Extender with UK mains lead
4 Channel Analog Output Expander, 4 Channel Dante Receive. For Use with Dante-Enabled Symetrix DSPs. PoE. Software Controlled- No Mechanical Switches or Circuit Board Jumpers. Low Cost Solution.
VP-427X is a high-performance auto-switcher/scaler receiver for 4K HDMI over long-reach HDBaseT and a local HDMI input.
Multiview II DVI-Rx-1K-SAP & Skew v2.01
Lieferzeit binnen 2 bis 3 Wochen
4K HDR HDBT Receiver / Scaler Tool with HDBaseT and HDMI Input
HDBaseT 2.0 extended range PoE receiver for 4K HDR HDMI signals with Ethernet, RS-232, IR, ARC and stereo audio.
TP-594Txr converts all Input signals into the transmitted HDBaseT 2.0 signal and enables routing the received ARC signal to the HDMI Input and to the digital/analog audio ports.
AVoIP Manager for Configuration and Monitoring of KDS-7 VoIP Deployments
The TP-205A is a high-performance distribution amplifier for computer graphics video signals with resolutions up to UXGA, RS-232 signals, and stereo or S/PDIF audio signals
The ADDERLink XD150 high-performance KVM (Keyboard, Video, Mouse) extender enables you to locate your critical hardware in a secure and temperature controlled environment, away from the user work station, whilst maintaining the original user desktop experience.
AdderLink XDVI. USB & Dual Link DVI KVMA CATx Extender 50 Mtr
Kramer 676T is a high-performance HDMI fiber transmitter for ultra-reach extension of 4K@60Hz (4:4:4) HDMI signals.
676R is a high-performance HDMI fiber receiver for ultra-reach extension of 4K@60Hz (4:4:4) HDMI signals.
The HDMI 2.0 optical fiber extender OP-HDFX-300-TR extends HDMI 2.0 signal up to 100 m. The max. bandwidth of 18 Gbps transmits signals with resolutions up to 4K UHD (4096x2160) at 60Hz / 4:4:4. The compact design allows fitting into various installation environments. Due to fiber optic transmission (multimode OM3) there is perfect electrical isolation....
4K HDMI Over HDBaseT TX/RX Kit, Up to 100m, A
TP-590TXR is a high-performance, extended-reach HDBaseT 2.0 transmitter for 4K60Hz (4:2:0) HDMI, USB, Ethernet, RS-232, IR and stereo audio signals over twisted pair.
TP-590RXR is a high-performance, extended-reach HDBaseT 2.0 receiver for 4K60Hz (4:2:0) HDMI, USB, Ethernet, RS-232, IR and stereo audio signals over twisted pair
HD-One LX500 KIT; Extend HDMI, Audio, IR and RS-232 - 1080P to 500ft (152m); Includes Tx, Rx, and (2) PSU
Lieferzeit binnen 2 bis 3 Wochen
DVI/HDMI Over HDBaseT TX/RX Kit, Up to 100m
HDMI Over Fiber TX/RX Kit, Up to 5km, 5Gbps
The Kramer TP-600TRXR 4K60 4:4:4 HDMI Extender with USB, Ethernet, RS-232 & IR over Extended-Reach HDBaseT 3.0 is a high-performance, extended-reach HDBaseT 3.0 extender for 4K60 Hz (4:4:4) HDMI, USB, RS-232, and IR signals over twisted pair.
HD-One DX500 - HDMI Video and Audio Extension Kit; Includes Tx, Rx, (2) universal power supplies. Extend HDMI with a single Cat6 cable - 1080P to 500' ft / 152m.
Lieferzeit binnen 2 bis 3 Wochen
Multiview II DVI-Rx-1K-S/A & skew with DVI audio embedding support v2.01
Lieferzeit binnen 2 bis 3 Wochen
The TH-SDI2AUDIO-T1 is a repeater and audio deembedder. The audio can be decoupled (stereo) and a processed signal is available on the SDI daisy chain.
Transparent USB & VGA KVMA CATx Extender 300 Mtr
The POEPRO-100A is the latest innovative new product from Zigen. The unit supports 4K/60Hz 4:4:4 HDMI 2.0, Bi-Directional IR, RS232, and ARC extension over single UTP/STP cable utilizing HDBaseT. Robust and cost effective the POEPRO-100A is the ideal HDMI extender for all of your projects requiring 24/7 flawless operation.
The TH-SDI2SDI-T1 is a repeater. Two independent signals can be built and amplified simultaneously.
HDBT wall plate TX with VGA and HDMI 1.4 input, extend 4K to 40m, HD to 70m, Euro form factor
Lieferzeit binnen 2 bis 3 Wochen
HDBT wall plate TX with VGA and HDMI 1.4 input, extend 4K to 130', HD to 230', US form factor
Lieferzeit binnen 2 bis 3 Wochen
HD-One LX - HDMI Video and Audio Extension Kit; Includes Tx, Rx, (2) universal power supplies. Extend HDMI with a single Cat6 cable - 1080P to 328' ft with RS-232, audio and Infrared control.
Lieferzeit binnen 2 bis 3 Wochen
AdderLink XDVI. USB & Single Link DVI KVMA CATx Extender 50 Mtr
AdderLink Digital iPEPS. Stand Alone KVM Over IP Unit (DVI & USB)
The ADDERLink ipeps+ enables computer access from anywhere in the world, securely and remotely via the Internet or a corporate network.
Transparent USB & Dual Head VGA KVMA CATx Extender 50 Mtr
The TP-582T is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to an HDBaseT twisted pair signal. The TP-582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT,...
SUPERCAT is a revolutionary CAT Extender for HDMI and DVI signals with numerous features for all kind of applications.
The TH-SDIDA-T1 is a repeater. The SDI signal is available at the 4 outputs.
The HDMI Extender Over Coaxial Cable from Zigen is comprised of one local transmitter and one remote receiver unit and is used for long distance transmission of HDMI video and embedded audio plus bi-directional control signals over a single coaxial cable.
HD-One DX - HDMI Video and Audio Extension Kit; Includes Tx, Rx, (2) universal power supplies. Extend HDMI with a single Cat6 cable - 1080P to 328' ft / 100m.
Lieferzeit binnen 2 bis 3 Wochen
AdderLink X2 Silver. PS/2 KVM & RS232 CATx Extender. Local Control 300 Mtr
PT-2UT/R-KIT is a comprehensive, extended-reach CAT extender kit for USB 2.0, RS-232 and audio signals and 2-way powering over twisted pair.
The Kramer TP-600TR 4K60 4:4:4 HDMI Extender with USB, Ethernet, RS-232 & IR over Long-Reach HDBaseT 3.0 is a high-performance, long-reach HDBaseT 3.0 extender for 4K60 Hz (4:4:4) HDMI, USB, RS-232, and IR signals over twisted pair.
The ADDERLink DV104T (ALDV104T) is a high performance digital video extender and splitter that enables you to keep your critical media source hardware in a secure and temperature controlled environment away while maintaining a consistent user experience.
The ADDERLink ipeps Dual-Access KVM Switch from Adder lets you remotely control a system via an IP connection and offers an additional set of ports for local access. This KVM switch provides you full control to a host system, including BIOS-level access, while the host computer operates on its original operating system.
TP-580CT converts the USB-C input video signal, along with all other input signals, into the transmitted HDBaseT signal. It extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.
The TP-582R is a high-quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to an HDBaseT twisted pair signal. The TP-582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT, RS-232,...
Simply connect the CAT5e cable to Video ports of the RX and TX device. The system is designed in a way that it will always show a picture
Transmitter: HDMI ver1.4a over Single Cat.5e/6. Uses HDBaseT 5Play technology 5Play: HDBase T, RS-232, IR. Max Distance: 100M (325 ft). Input: HDMI. Output: Single Cat.5e/6 via RJ45. PoE (Power over Ethernet) capability for Receiver 1T-CT-654
Lieferzeit binnen 2 bis 3 Wochen
Receiver: HDMI ver1.4a over Single Cat.5e/6. Uses HDbaseT 5Play technology RS-232, IR. Max Distance: Up to 100M (325 ft). Output: HDMI. Input: Single Cat.5e/6 via RJ45. Power Supply included for use with non 5 Play TX units Compatible Transmitters: 1T-CT-653 / CORIOmax HDbaseT module
Lieferzeit binnen 2 bis 3 Wochen
AdderLink X2 Silver. PS/2 KVM & RS232 CATx Extender. 300 Mtr. Extends KVM and transparent RS232 across a single CATx cable
The ZIG-HVX-100 HDbaseT HDMI Extender Kit from Zigen is comprised of a local transmitter and a remote receiver unit and is used for long-distance transmission of HDMI video and embedded audio plus bi-directional control signals over a single CAT 5/6 cable. It can extend signals up to 328 feet away.
The POEPRO-70A is the latest innovative new product from Zigen. The unit supports 4K/60Hz 4:4:4 HDMI 2.0, Bi-Directional IR, RS232, and ARC extension over single UTP/STP cable utilizing HDBaseT. Robust and cost effective the POEPRO-70A is the ideal HDMI extender for all of your projects requiring 24/7 flawless operation.