Phono dual adapter, female - female, hard gold plated
3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount
3 pole 3.5 mm plug, black metal handle, gold plated contacts
3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount
3.5 mm plug, 3 pole, black metal handle, gold plated contacts, up to 8 mm cable diameter
3 pole 1/4 inches plug, long diecast handle
Module with switching contacts for NYS-SPP-L1. Solution for insert jack of mixing consoles, Split print by-passes the use of a special wired Y-Cable.
4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs.
Bantam Cable, Swissflex, 4 x 0.22 mm2 + spiral shield, outer diameter 4.7 mm. Price / meter.
3 pole XLR female contact holder with gold-plated contacts without housing
7 pole DIN cable connector, gold plated contacts
Microphone cable with 2 x 0.22 mm2, double spiral shield and Visco wires, PVC jacket and with an outer diameter of 6 mm
Black, dual Siam instrument cable, 2 x 1 x 0.22 mm2, with spiral shield, PVC jacket and an outer diameter of 2 x 4 mm.
1/4 inches stereo jack, switched, with chrome ferrule and offset PCB pins, mounting nut included, Gold plated contacts
The rubber sealing cover protects D-Type chassis connectors from dust and water according to protection class IP65. Suitable for: XLR D Series male
Special Adapter, Phono (RCA) Jack female to BNC male, with gold-plated contacts
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
5 pole DIN cable connector, gold plated contacts
3 pole 3.5 mm plug to 3 pole 1/4 inches jack adapter, all metal
3 pole male contact holder with gold-plated contacts but without housing
3 pole 1/4 inches jack for thick panels, special designed head for guitar strap, long-threaded bushing with washer and nut, full metal
3 pole 1/4 inches right angle plug, metal housing, plastic bushing
3 pole 3.5 mm plug, black metal handle
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount
1/4 inches stereo jack, switched, full threaded nose, straight PCB pins, gold plated contacts, mounting nut included
2 pole 1/4 inches plug to plug adapter, full metal
3 pole 1/4 inches jack to jack adapter
3 pole DIN cable connector, gold plated contacts
3 pole 1/4 inches plug, short metal handle
3 pole 3.5 mm plug, metal handle, gold plated contacts
2 pole 3.5 mm plug, black metal handle, gold plated contacts
Speaker Cable, 2 x 1.5 mm2, outer diameter 6.2 ± 0.2 mm, high-flexible, black. Price / meter.
2 pole 1/4 inches plug, long diecast handle
1/4 inches stereo jack, metal nose, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact
3 pole 3.5 mm cable jack, black metal handle, gold plated contacts, max. cable O.D. 4 mm
Phono plug, nickel plated shell, gold plated contacts
Mono 1/4" right-angle plug with pan head
Gasket for speakON G-size housings for an airtight connection between chassis and frontpanel (also suitable for Amphenol EP cutouts).
Ruber-cap inc string + eye 4 chassis fix
3 pole XLR female receptacle with 1/4 inch stereo jack, horizontal PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inch jack in the smallest available XLR housing.
3 pole XLR female receptacle with 1/4 inch stereo jack, vertical PCB mount. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inch jack in the smallest available XLR housing.
2 pole 3.5 mm plug, black metal handle with crimp strain relief
3 pole 3.5 mm cable jack, metal handle, max. cable O.D. 6 mm
Black bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm. Price / meter.
3 pole male receptacle, plastic
Yellow lettering plate for D-shape-connectors
White lettering plate for D-shape-connectors
Violet lettering plate for D-shape-connectors
Red lettering plate for D-shape-connectors
Orange lettering plate for D-shape-connectors
Gray lettering plate for D-shape-connectors
Black lettering plate for D-shape-connectors
Green lettering plate for D-shape-connectors
Blue lettering plate for D-shape-connectors
Brown lettering plate for D-shape-connectors
3 pole XLR female receptacle with 1/4 inches stereo jack, horizontal PCB mount, retention spring. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack in the smallest available XLR housing.
3 pole XLR female receptacle with 1/4 inches stereo jack, vertical PCB mount, retention spring. XLR / jack hybrid chassis connector combining 3 pole XLR receptacle and 1/4 inches jack in the smallest available XLR housing.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount
1/4 inches stereo jack, switched, with chrome ferrule and standard solder lugs, mounting nut included
The ZNK 2/3 cable is very thin and therefore matches the nanoCON Series best. It is also recommendable for installations with little space in the cable duct or for use in medical technology. The transmission mode is analogue and the cables have balanced signals. Price / meter.
Phono cable jack, gold plated contacts, black plated shell
3 pole open 1/4 inches jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205 inches faston tabs
3 pole 1/4 inches plug, plastic handle with flexible strain relief
3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, lateral right PCB mount
3 x switching (normalling) stereo jack (T/TN/R/RN/S/SN). Vertical PCB mount panel jack in A-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force
Rubber frame to mount between the front plate and the rear verticale print, for airtight vertical XLR A and B Series chassis connectors
2 pole 1/4 inches plug, short metal handle
1/4 inches stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact
Thumbscrew to ND-AMX-HAUBE M2.5
Black microphone cable (Swissflex NK2) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.5 mm. Price / meter
Balanced, digital single pair microphone cable, with an inner conductor of 2 x 0,22 mm2, according to AES/EBU with spiral shield for mobile applications. The 110 ? (ohm) cable with DMC Flex PVC jacket has an outer diameter of 6.5 mm. price / meter.
Black, unbalanced instrument cables (Swissflex NK1) with 1 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.2 mm. Price / meter.
Thumbscrew to ND-AMX-HAUBE UNC
1/4 inches stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection
Bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm.
Chass.Con.Male 3P. V Panelisol.
Large bushing with chuck type strain relief for PX-Series. Accommodates cables up to an OD of 8 mm (0.31 inch).
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount
Black, digital AES/EBU 110 ohm switchboard cable with 1 x 2 x 0.22 mm2, an outer diameter of 3.8 mm and PVC jacket. Price / meter.
Phono plug, nickel plated shell and contacts
3 pole XLR male contact holder with gold-plated contacts without housing
2 pole 3.5 mm plug, metal handle with crimp strain relief, gold contacts
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount
Switchboard cable, FRNC, 110 Ohm, AES/EBU, halogen-free, 1x 2x 0.22 mm2, foil screened, parallel stranded wire, outer diameter 3.8 mm. Price / meter.
1/4 inches stereo jack, switched, with chrome ferrule and offset PCB pins, mounting nut included
2 x switching (normalling) stereo jack (T/TN/R/RN/S). Vertical PCB mount panel jack in A-gauge version with gold plated contacts and unique quick fixing cap for rapid panel mounting. Separation of mechanical latch and electrical contacts offers high retention force combined with low insertion force.
3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount
1/4 inches stereo jack, switched, with chrome ferrule and straight PCB pins, mounting nut included
3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount
3 pole vertical 1/4 inches jack with tip and ring normalling contacts, plastic housing, metal washer and nut
2 pole open 1/4 inches jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205 inches faston tabs
Blind Plate for D-size cutouts made of black plastic, same format like DBA-BL. Suitable for your own assemblings. The cutout can be formatted individually.
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, Retention spring instead of latch
3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch
3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch
1/4 inches stereo jack, switched, with a full threaded nose and standard solder lugs, mounting nut included
3 pole 3.5 mm plug, metal handle, large cable outlet of 6 mm