ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
Bantam Cable, Swissflex, 4 x 0.22 mm2 + spiral shield, outer diameter 4.7 mm
Microphone cable Kevlar AES/EBU,PVC INDOOR,100M
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
Black microphone cable with 2 x 0.22 mm2, double spiral shield and Visco wires, PVC jacket and with an outer diameter of 6 mm.
Bantam Cable, Swissflex, 2 x 2 x 0.19 mm2, outer diameter 2 x 4 mm, spiral shield, black.
Black, dual Siam instrument cable, 2 x 1 x 0.22 mm2, with spiral shield, PVC jacket and an outer diameter of 2 x 4 mm.
ZNKMP8/14 (Multicore cable 11,7 mm 8 x 2 strands of 0,22 mm2 with PVC jacket) Side a: 8 x NC3FXX; Side b: 8 x NC3MXX incl. XXCR and coloured BXX
D-Sub Multicore cable analog, ZNKMP8/14 (Multicore cable analog 11.7 mm, 8 x 2 strands of 0.22 mm2 PVC-coating black), D-Sub 25 pol. male to 8 x NP3X.
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3FXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
Die for Crimp XLR XX-HA. Suitable for tool HX-R-BNC. Standard B-crimp acc. to IEC 60352-2. Wire size AWG 24-22, 0.22 - 0.34 mm2
ZNKMP8/14 Multicore cable 11.7 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 4 x NC3FXX / 4 x NC3MXX; side b: 4 x NC3MXX / 4 x NC3FXX. inkl. XXCR and coloured boots BXX (brown, red, orange and yellow).
Cascade cable, 3m, D-Sub half Pitch 68 pin
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 4x 4-pole speakON NLT4MX-BAG, 2-pole wired.
1m ZNKMP8/14 Multicore cable 11.7 mm, 8x2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NC3MXX, side b: 8 x NP3X incl. XXCR/PXR and coloured BXX/BPX.
ZNK CT2956401BL Multicore cable 14.9 mm, 8 x 2 strands, 0.22 mm2, PVC-coat. Side a: 8 x NP3X, side b: 8 x NP3X incl. PXR and coloured BPX.
6m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
6m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
6m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
Optional cable for TH-909, TH900mk2 and TH-610
Generalmente spedito 4 settimane
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Connection cable with PTT, open ends
40m extension coax cable with SMA male connectors
3m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
3m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
3m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Tascam) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
1m (Tascam-Yamaha) Digital interface cable ZNK CT2956401-BL (Digital-Multicore AES/EBU), 14.9 mm, with 8x 2 strands at 0.22 mm2, black PVC jacket, with 25-pole D-Sub male connector to 25-pole D-Sub male connector, wired according to the Tascam pinout standard. Yamaha and Tascam are registered brands.
Speaker Cable, 2 x 1.5 mm2, outer diameter 6.2 ± 0.2 mm, high-flexible, black.
15" Right Angle TA5F to (2) Low-Profile XLR-3M, cable for Lectrosonics SRc5P/SRb5P receiver outputs into field mixers/recorders, (CH1 Blue/CH2 Red), 4-position adjustable TA5F at 0degree, 90 degree, 180 degree and 270 degree
24" (60cm) Right Angle TA5F to (2) Low-Profile TA3F cable
Y-speaker cables with 1x 8-pole speakON NLT8MX-BAG to 2x 4-pole speakON NLT4MX-BAG connectors, 4-pole wired.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
15m Muco 4 x XLR f / 4 x XLR
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
24" LPS Low-Profile cable for Lectrosonics SRc5P / DSR4 outs to XLR Inputs
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
3m Y-speaker cable with one 8 pole speakON NLT8MX-BAG to 4 x speakON NL4FX 2 pole wired.
XP Opt. Chasis CON F
Combiner Line combines left and right channel of stereo signal by means of a passive network. afterwards the circuit is balanced by a NTL transformer (galvanic isolation) and terminated by a male XLR output. Especially used for stereo equipment with asymmetric outputs (RCA) for connections to a symmetric input (XLR female)
Distributes symmetrical mono output signal of a source to 2 RCA outputs+ (asym.) L + R. Via NTL1 (galvanic isolation) and a downstream passive network. Especially suited for transmission lines that should remain symmetric and be rendered asymmetric directly before arriving at the user (recipient).
Microphone cable with double twist (double helix) braiding as shield. Diameter 5 mm, length 10 m. XLR 3 connectors, matte black
Speaker cable ZNK 2962800 (4x4 mm2) black, speakON NL4FX on each side.
Y-speaker cables with 1x 8-pole speakON NLT8MX-BAG to 2x 4-pole speakON NLT4MX-BAG connectors, 4-pole wired.
DI-Adapter Mic 2 / 200 Ohm / 1:1
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 2x speakON NL4FX 4-pole wired.
Black bantam cable (Swissflex) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 4.7 mm.
Connects between the microphone head and the XLR module to make the microphone
1m Y-speaker cable with one 8 pole speakON NLT8MX-BAG to 4 x speakON NL4FX 2 pole wired.
Ground-Loop-Insulator, Line XLR female/XLR male, 1:1 transmission for 600 Ohm impedance, Line up to 6V, frequency 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
Adapter Line, asymmetrical transmission XLR fem./RCA fem., 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Adapter Line, symmetrical transmission XLR male / RCA female, 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
OPTION: Audio Breakout cable 25 SubD to 8 x Female XLR. A 20% restocking fee applies to all product returns.
OPTION: Audio Breakout cable 25 SubD to 8 x Male XLR. A 20% restocking fee applies to all product returns.
OPTION: Audio Breakout cable 25 SubD to 4 Male and 4 Female XLR. A 20% restocking fee applies to all product returns.
The ZNK 2/3 cable is very thin and therefore matches the nanoCON Series best. It is also recommendable for installations with little space in the cable duct or for use in medical technology. The transmission mode is analogue and the cables have balanced signals.
Microphone Cable 5-Pol XLR female to 2x 3-Pol XLR male
Y-speaker cable with one 8-pole speakON NLT8MX-BAG to 2x speakON NL4FX 4-pole wired.
10m Muco 4 x XLR f / 4 x XLR
Black microphone cable (Swissflex NK2) with 2 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.5 mm.
Black, unbalanced instrument cables (Swissflex NK1) with 1 x 0.22 mm2, spiral shield, PVC jacket and an outer diameter of 6.2 mm.
VT1126-SK50 - with Lemo 3-pin connector for Sennheiser SK50, 2000 Series
Generalmente spedito 4 settimane
VT1126-TA3/A - with TA3F connector for AKG
Generalmente spedito 4 settimane
VT1126-TA4/A - with TA4F connector for Shure + Sabine
Generalmente spedito 4 settimane
VT1126-TA5/A - with TA5F connector for Lectrosonics SMB, SMDB or UM & LM Series
Generalmente spedito 4 settimane
Y-cable with one XLR 5 F connector and two XLR 3 M connectors. It is used to split two-channel signals into two mono channels, when using, for example, the BS 48 i-2 power supply
Phantom Modules for Audio Limited 6 Pin. The VT1126 phantom adapter is a small unit that allows hard-wired use of miniature lavalier microphones. It converts 48V phantom to electret power and puts out the audio as an electronically balanced signal on an XLR 3-pin male connector.
Generalmente spedito 4 settimane
Phantom Audio Adapter Hardwired Version
Generalmente spedito 4 settimane
Phantom Audio Adapter for Micron Explorer with 6 Pin
Generalmente spedito 4 settimane
Phantom Audio Adapter for Micron 8 pin system
Generalmente spedito 4 settimane
Phantom Audio Adapter for Sennheiser 1 Pin
Generalmente spedito 4 settimane
VT1126-S3.5 - with 3.5mm SONY locking connector for Sennheiser Evolution Series
Generalmente spedito 4 settimane
Kramer's C-MGMA/MGMA is a micro sized, high-performance cable for computer graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both ends.
Kramers GMA series are high-performance cables with male 15-pin HD and 3.5mm stereo audio connectors at each end. They are perfect for computer graphics video to display installations that require an audio signal as well.
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.
Speaker cable ZNK 2/10 (2x4 mm2) black, speakON NL4FX on each side.
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
9m Muco 4 x XLR f / 4 x XLR
Ground loop insulator line phono jack to phono jack, 1:1 transmission for signals with 600 ohm impedance, Line up to 6 V, 30Hz-40KHz frequency. Transmission with ground lift 1:1 (NTL1), interferences and ground loops can be avoided.
Antenna Cable for SpeechLine Digital Wireless Receiver, 20m
6" TA5M to 3-pin Locking (LEMO) Adaptor cable
Switchboard cable, FRNC, 110 Ohm, AES/EBU, halogen-free, 1x 2x 0.22 mm2, foil screened, parallel stranded wire, outer diameter 3.8 mm.
Black, digital AES/EBU 110 ohm switchboard cable with 1 x 2 x 0.22 mm2, an outer diameter of 3.8 mm and PVC jacket.
Audio Breakout cable 15 SubD to 4 x Male XLR. A 20% restocking fee applies to all product returns.
OPTION: Audio Breakout cable D-Sub 15 to 2x Male + 2x Female XLR. A 20% restocking fee applies to all product returns.
Speaker cable ZNK 8/14 (8x2.5 mm2) black. Assembled with NL8FC on both sides.
The DPA DAD6004 is a MicroDot to 6-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio Limited TX 2000 and TX 2020 wireless transmitters.
An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio Technica 3000 Series (Generation 4), 5000 Series ( Generation 3), 6000 Series.
The 66' Microphone Cable with Slim XLR Connector from DPA Microphones is an installation solution that uses Mogami cable and an ultra slim XLR housing.
Right-angled MCX plug to right-angled SMA plug (pack of 2)
Generalmente spedito 4 settimane
18" LPXLR-3F to LPXLR-3M Premium Coiled "Boom pole to Mixer" cable
Black, single-pair switchboard, 1 x 2 x 0.51 mm2 (AWG ~20), with tin-plated copper wire, foil screen as well as drain wire, PVC jacket and an outer diameter of 3.5 mm.
Speaker cable ZNK 4/11 (4x2.5 mm2) black, speakON NL4FX on each side.
Black, 3-pole wired Draka DMX microphone cable (ZNK CT2963500) with Kevlar, PUR jacket and an outer diameter of 6.5 mm, assembled with 5-pole XLR male cable connector to 5-pole XLR female cable connector, both with silver-plated contacts. This cable is 3-pole wired: Pin 1 = Mass (shield); Pin 2 = Signal inverted (DMX?, Cold); Pin 3 = Signal (DMX+, Hot).
ZNKMP4/10 multicore cable, 9.1 mm, with 4x 2 strands at 0.22 mm2 and PVC jacket, including transparent coding ring (XXCR) and coloured bushings (BXX). The XLR's are from the XX-series (NC3FXX to NC3MXX). The four channels can be freely defined.
6m Muco 4 x XLR f / 4 x XLR
Kramers XLQ cables are quad style professional-grade mic or line level audio cables. 4-core star quad cables with mutually offsetting twisting technology can reduce induction noise levels to 10% of that in regular two-pair balanced microphone cable.