For professionals and enthusiasts alike.
DSP power amplifier, 4x2000W / 4?, DSP Fohhn Audio, AES / EBU input, Phoenix terminals
The DI-4.1000 has an output power of 2000 W / 4 ohms per channel, four input- and four output channels. It has a compact 2U / 19 enclosure and weighs just 9.4 kg. The amplifier works extremely quietly and its fans are not used while idling
DSP power amplifier, 2x4000W / 4?, Fohhn Audio DSP, input AES/EBU, Phoenix terminals
The DI-2.2000 has an output power of 2000 W / 4 ohms per channel, four input- and two output channels. It has a compact 2U / 19 enclosure and weighs just 9.4 kg. The amplifier works extremely quietly and its fans are not used while idling
4 x 1900 W / 4 Ohm, 4 x 1200 W / 8 Ohm and 100V, Dante 16in/16out, Matrix 20x8, 2U (installation version)
4 x 1900 W / 4 Ohm, 4 x 1200 W / 8 Ohm, Dante 16in/16out, Matrix 20x8, 2U (version touring)
4 x 900 W / 4 Ohm, 4 x 600 W / 8 Ohm and 100V, Dante 16in/16out, Matrix 20x8, 2U (installation version)
Amplifier 8 x 280 Watt/4 Ohm, 8 x 250 Watt/40 Ohm@100V - 2U, DANTE
4 x 900 W / 4 Ohm, 4 x 600 W / 8 Ohm, Dante 16in/16out, Matrix 20x8, 2U (version touring)
Amplifier 8 x 280 Watt/4 Ohm, 8 x 250 Watt/40 Ohm@100V - 2U, YDIF
DSP matrix amplifier, 2x 1200 W / 4 ohm, DANTE in, DSP in / out, speaker presets, 100 V capacity, 19
DSP matrix amplifier, 4x 600 W / 4 ohm, DANTE in, DSP in / out, speaker presets, 100 V capacity, 19
DSP matrix amplifier, 2x 1200 W / 4 ohm, line / microphone, DSP in / out, speaker presets, capacity 100 V, 19½
DSP matrix amplifier, 4x 600 W / 4 ohm, line / microphone, DSP in / out, speaker presets, capacity 100 V, 19"
The Neumann V 402 is a rackmount 2-channel microphone, instrument, or line preamplifier, painstakingly designed to deliver the true sound of your source at any gain setting.
Amplifier 8 x 140 Watt/4 Ohm, 8 x 125 Watt/80 Ohm@100V - 2U, DANTE
Amplifier 8 x 140 Watt/4 Ohm, 8 x 125 Watt/80 Ohm@100V - 2U, YDIF
Amplifier 4 x 280 Watt/4 Ohm, 4 x 250 Watt/40 Ohm@100V - 2U, DANTE
Amplifier 4 x 280 Watt/4 Ohm, 4 x 250 Watt/40 Ohm@100V - 2U, YDIF
With the Kramer PA-240Net 240W networked power amplifier, AV systems installers can provide high-performance amplification of analog or Dante sources to Lo-Z or Hi-Z speaker lines in meeting rooms, educational facilities, shops, hotels, restaurants, and more.
Amplifier 4 x 140 Watt/4 Ohm, 4 x 125 Watt/80 Ohm@100V - 2U, DANTE
Matrix DSP Amplifier, 4 × 75 W / 4?, DANTE Input, DSP In / Out, Presets of speaker, 9.5½
Matrix DSP Amplifier, 4 × 75 W / 4 ?, Line / Mic, DSP Input / Output, Speaker presets, 9.5½
120W Networked Power Amplifier
AIREA 2 x 300W DSP amplifier module. AIREA-Net input, 2 x loudspeaker outputs
Amplifier 4 x 140 Watt/4 Ohm, 4 x 125 Watt/80 Ohm@100V - 2U, YDIF
Amplifier 2 x 1000 Watt / 8 Ohm - 2U, DSP processing: HPF/LPF, Delay, Speaker presets (FOH/MAIN, MONITOR, OFF)
PA-240Z is a high-performance Hi-Z (70V/100V) and Lo-Z (4/8?) controllable power amplifier featuring balanced and unbalanced inputs and line-level output. This powerful amplifier is suitable for large-scale applications
Amplifier 2 x 800 Watt / 8 Ohm - 2U, DSP processing: HPF/LPF, Delay, Speaker presets (FOH/MAIN, MONITOR, OFF)
2-channel high-impedance power amplifier (200W/24 ohm @70V, 200W/48 ohm @100V).
PoE+ Net to 50WMonoAmp/70or100V
The RDL SF-NP35E is a SysFlex series 35W Dante to 70/100V mono audio amplifier designed to convert one Dante input to a constant voltage amplified output for A/V technicians, system installers, and audio engineers in office buildings, retail environments, and educational facilities.
Amplifier 2 x 500 Watt / 8 Ohm - 2U, DSP processing: HPF/LPF, Delay, Speaker presets (FOH/MAIN, MONITOR, OFF)
PA-120Z is a high-performance Hi-Z (70V/100V) and Lo-Z (4/8?) controllable power amplifier featuring balanced and unbalanced inputs and line-level output. This versatile amplifier is suitable for a vast range of applications, including mid-size to large meeting rooms
The RDL SF-NP16E is a SysFlex series 16W Dante to 70/100V mono audio amplifier designed to convert one Dante input to a constant voltage amplified output for A/V technicians, system installers, and audio engineers in office buildings, retail environments, and educational facilities.
The RU-MLD4T is a professional-quality 1-in, 4-out audio distribution amplifier. It can accept or send mic or line level signals, and the input connection can be made via the front-panel XLR connector or the rear-panel terminal block connectors. Outputs are connected via front-panel XLR or rear-panel terminal block connectors as well.
RDL SF-NP40DE Dante to 40W Stereo Power Amplifier
Amplifier 2 x 300 Watt / 8 Ohm - 2U, DSP processing: HPF/LPF, Delay, Speaker presets (FOH/MAIN, MONITOR, OFF)
Class-D mixer amplifier, switchable for Lo-Z (4Ohm / 120W x 2 Ch., 3Ohm/8Ohm / 100W - 2 Ch.) or Hi-Z (70V/100V / 120W x 2 Ch., 200W x 1 Ch.)
The HD-RA35UA is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), are driven from high-efficiency Class D amplifier stages. Includes worldwide power supply (no power cord)
Dual Microphone Amplifier With Gain Control (1U)
The HD-RA35U is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), are driven from high-efficiency Class D amplifier stages. Includes worldwide power supply (no power cord)
Integrated Amp, 90W + 90W, Gold plated input terminal, Symmetrical Design
4 x 150 Watts transformers 2U rack
Power amplifier, 2x1350Watt RMS
Generalmente spedito entro 2 o 3 settimane
With quick, easy setup and intuitive operation, the compact MA and PA series power amplifiers make it easier than ever to bring your commercial space to life.
The HD-MA35A is a three input audio mixer amplifier for systems demanding a broad range of features and high energy efficiency. Two output power amplifier zones are provided, 35 W (Zone 1) and 2 W (Zone 2). Includes worldwide power supply (no power cord).
The MA-BT240 is a versatile mixing amplifier designed for sound distribution, presentations and announcements in smaller commercial environments.
Generalmente spedito entro 4 o 6 settimane
The RDL SF-PA50AX is a SysFlex series 50W 70/100V mono audio amplifier designed to convert one analog input to a constant voltage amplified output for A/V technicians, system installers, and audio engineers in office buildings, retail environments, and educational facilities.
The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal.
Dual Microphone Amplifier
RU-PA40D is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ohm or 8 Ohm speakers. It is specifically suited to amplification applications where users need to adjust the gain. Examples include projectors or monitors with fixed audio outputs used in classrooms, boardrooms or video...
Single Microphone Amplifier
The 907xl is a high-performance power amplifier for line-level stereo audio signals. It accepts a balanced stereo audio signal on a terminal block connector and an unbalanced stereo signal on RCA connectors. It delivers 40 watts per channel into an 8 ohm load.
The RU-PA518 audio power amplifier offers operation in either stereo or bridged-mono mode, providing from 5 watts to over 18 watts of RMS output power, all in a 1/3 rack size unit. RDL's advanced circuitry provides professional-quality audio with a built-in peak limiter. Gain controls for each channel are on the front-panel for quick and easy adjustments.
The HD-PA35A is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord)
The HD-PA35U is a single input audio amplifier for systems demanding the highest energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord).
High Power 8 Channel Headphones amplifier, 1U
Generalmente spedito entro 4 o 6 settimane
PA-50HZ (PA-50Z) is a compact Hi-Z (70V/100V) power amplifier with line-level output, ideal for small to medium-size meeting spaces and classrooms.
The versatile RDL FP-PA35A is a 35 W, mono, class D power amplifier ideal wherever a small, high quality amp with high efficiency is needed. Offering amplification for 25, 70, or 100 V speakers and a compact all metal enclosure able to be mounted practically anywhere; this unit will prove to be a great solution for numerous applications.
The HD-PA35 is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. Includes worldwide power supply (no power cord)
Power amplifier, 2x750Watt RMS
Generalmente spedito entro 2 o 3 settimane
The FP-PA18 is a high efficiency 18 W power amplifier with a line input, 8 ohm output, integral audio compressor and an automatic sleep mode. The FP-PA18 features a balanced line level input that may be connected unbalanced. A gain control located next to the terminal block is designed to be adjusted manually or with a trimming screwdriver.
Class-D mixer amplifier, switchable for Lo-Z (3Ohm/4Ohm/8Ohm / 30W x 2 Ch.) or Hi-Z (70V/100V / 60W x 1 Ch.)
The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment. The thermal characteristics of the module case and construction throughout using high temperature components permit operation over a range of 0 to 70 degrees C.
The 900xl is a high-performance power amplifier for line level stereo audio signals. The unit accepts unbalanced audio signals on either of two RCA or 3.5mm connectors and delivers a speaker output of 10 watts RMS per channel into a 4 ohm load.
The Presonus Studio Channel is a channel strip that features a tube preamp, a VCA compressor, and a 3-band parametric EQ. The tube preamp section features two knobs: Gain and Tube Drive. This allows you to adjust the amount of signal that hits the tube circuitry, opening up a wide range of sonic options.
The STA-2A Dual High-Gain Line Amplifier is a dual-channel line-level audio preamplifer. This unit offers up to 24dB gain in audio lines. Conversion between balanced and unbalanced audio is possible, as is conversion between high and low impedance.
The HP60 from PreSonus is a versatile six-channel headphone mixing system ideal for live or studio applications. This rack mountable unit contains six independent headphone amplifiers for strong, clear audio. Two stereo inputs and an external input allow you to mix the output between three audio streams.
The ST-UBA2 Unbalanced to Balanced Amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. The mono sum output may be used to drive patch-bay...
The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Both a 70 V and 100 V amplified output are provided to drive...
The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The output will drive an 8 Ohm speaker or multiple speakers connected to...
The FP-PA20B features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. A 25 V amplified output is provided to drive corresponding speakers in...
Class-D mixer amplifier, switchable for Lo-Z (3Ohm/4Ohm/8Ohm / 30W x 2 Ch.) or Hi-Z (70V/100V / 60W x 1 Ch.)
The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. Includes worldwide power supply (specify plug).
The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack. The left and right audio signals received on pairs B and C of the twisted pair cable are summed to mono and amplified.
The ST-GCA3 Auto Gain Control Amplifier constantly adjusts audio levels so you always maintain the correct output. The adjustment rate is switch-selectable so you get an even greater amount of control. The SLOW mode works best at leveling music sources, while the FAST mode is ideal for changing conditions that require instant adjustments.
The ST-PA18 is a high-quality compact audio power amplifier designed for use with an eight Ohm speaker system. It offers 18W of RMS power. It features screw terminal connectors, and can accept balanced or unbalanced input signals. A loop output is also provided for connecting additional amplifiers.
The 900N is a high-performance power amplifier for balanced or unbalanced stereo audio signals. Either input can deliver a speaker output of 8.4 watts RMS power per channel into a 4 ohm load.
The ST-GLA1 Gated Line Amplifier & Noise Gate is a device that allows you to produce an automatically switched line-level signal with integral noise reduction. The unit can be used as a stand-alone solution or combined with other RDL modules to produce a custom mixing system. It features an open-collector slave output that can be used to trigger other...
The ST-VCA3 Voltage-Controlled Amplifier provides smooth audio-level control from a remote control panel, allowing you to adjust voltage from 0 to 10VDC. Use this unit when you need to keep audio sources and components isolated in rack, but want to extend audio controls outside of the rack and eliminate scratchy audio.
The STA-1M is a high quality, miniature wall and surface mount, mono-audio amplifier, designed for use in situations where balanced/unbalanced configuration conversion, impedance conversion, and level boost or cut are required.
The 106 is a high-quality distribution amplifier for balanced mono microphone signals. It takes one dynamic or condenser microphone input and distributes the signal to two line-level outputs.
The ST-PA6 is a professional-quality audio power amplifier with a two inputs and a single eight Ohm output, which delivers 6W RMS to an eight Ohm speaker. All connections are made via screw terminals. Each of the inputs is a balanced bridge, with both inputs being actively mixed equally. Simple gain and bass EQ controls are provided.
The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output. This module may be used in conjunction with other RDL modules to configure automatic mixing systems or may be used alone as a single-speaker monitor amplifier.
The PT-102AN is a high-performance audio distribution amplifier for unbalanced stereo signals. The unit takes one stereo input and distributes the signal to two identical stereo outputs.
The TX-1W is a high-quality compact amplifier designed to feed music or voice signals to a telephone system.
Match Transformer with 2 separated secondary inputs (+4 dBu & -10 dBV) primary output +4 dBu
The HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. It is designed with four discrete headphone outputs on the front panel, each with its own volume potentiometer and 150mW of amplification per channel.
The ST-PA2 is a professional-quality utility amplifier with a single input and two outputs. All connections are made via screw terminals. The first output delivers 2W RMS of power to an 8 Ohm speaker, while the second output is designed to drive 600 Ohm transformers. This makes the unit great for music-on-hold systems, which may have either 8 or 600 Ohm...
Audio Transformer +6dBu
The HP2 from Presonus is a battery-powered personal headphone amplifier with volume and pan control for driving wired in-ear monitors as well as headphones. It can be used by musicians and performers in applications such as live stage, theater, rehearsals, and more.
Remote volume control for MA amplifiers
Professional studio transformer 1:1 for PCB mount, fully shielded. Applications: line input
Professional studio transformer 1:1 for PCB mount, fully shielded. Applications: mic input, splitting
Professional studio transformer 1:4 for PCB mount, fully shielded. Applications: mic input step-up.
A separately sold bracket for rack mounting an MA/PA series power amplifier.
Remote volume control for MA amplifiers Print
Miniature transformer balancing adapter, 3 pole XLR female - RCA / phono socket, red coded
Miniature transformer balancing adapter, 3 pole XLR female - RCA / phono socket, black coded
Miniature transformer balancing adapter, 3 pole XLR male - RCA / phono, red coded
Miniature transformer balancing adapter, 3 pole XLR male - RCA / phono socket, black coded
Miniature transformer balancing adapter, 3 pole XLR female - 1/4 inches jack, ground lifted
Miniature transformer balancing adapter, 3 pole XLR male - 1/4" Jack, ground lifted
Print for NTM1, NTM4, including insolating plate
Print for NTL1 including insolating plate
Stereo Print to NTL1, NTM4, NTM1 (NSTP)
Professional audio transformer 1:4 with free wires. Applications: mic input step-up
Professional audio transformer 1:1 with PCB mounting. Print Version
Professional audio transformer 1:1 with free wires. Applications: general purpose, splitting and XLR inline
Print for NTL1, NTM1, NTM4, including insolating plate
Insulating plate for NTM and NTL transformers