For professionals and enthusiasts alike.
Connect a mic equipped with a 3.5mm TRS connector to the XLR input of a professional camera, recorder, or mixer with the Rode VXLR Pro, a durable inline adapter outfitted with a transformer-balanced output to ensure quality signal transfer over long cable runs.
9 pezzi in magazzino
The VXLR+ is a 3.5mm female TRS socket to male XLR adaptor, which will convert 12-48V Phantom Power down to 3-5V 'Plug in Power', allowing R?DE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2 Headset Mic to receive power from the XLR input
12 pezzi in magazzino
COLORS 2 is a set of four coloured windshields, cable identification rings, tags and a sticker sheet for use with the Wireless GO, Wireless GO II, Lavalier GO and smartLav+, making it easy to keep tracking of who is talking on each microphone in multi-mic setups.
5 pezzi in magazzino
3,5 mm stereo jack to 6,35 mm stereo plug
5 pezzi in magazzino
Dummy-plate to cover D-shape cutouts, White
6 pezzi in magazzino
Velcro strap, red, width 16 mm, length 200 mm, with Contrik imprint.
25 pezzi in magazzino
CAS-OPTICALCON ADV
Drum 460mm + auxiliary spool WBR 250mm
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of wires, conducts and lines. These cable reels are stackable with SK 4700 or SK 4730.
IP65 COUPLER SMAPC MTP24 ADV TPC
Speed boot assembly tool to press the XX boot onto shell
Special steel cable reel for daily rugged stage applications in proven quality. Portable sheet steel cable drum with RM-cover, for winding on both sides, with 2-fold axle bearing and swivelling crank handle. It has a core diameter of 281 mm.
Cable Drum HT582
Professional, black stage cable reel for efficient installation, with auxiliary coil for storage of all sorts of cables. These cable reels are stackable.
Inline Female audio 24 pole / video 6XRG59 + Dust Cap
Inline Female audio 24 pole / video 6xRG59
Cable Drum GT450
The matcher is particularly suitable for external floor sockets 2x FLF as a multifunctional stereo audio input. All signals are galvanically isolated via a special audio transmitter and led level adapted to a joint clamp output.
The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are single tones and some are a sequence. Each of the 8 chimes is triggered by an individual external closure to ground. A momentary closure to...
Black FLF mounting plate, equipped with one splitter, which is particularly suitable for recording existing balanced stereo transmissions (e.g. interpreter equipment). Galvanic isolation is offered as well as an additional level-adjusted unbalanced RCA output signal.
Panel female audio 24 pole / video 6XRG59
The assembly tool HX-TT-1 consists of a crimp tool and a press tool to assemble NP3TT-1-* and NP3TT-AU-* plugs.
Inline male audio / video 6XRG59 + Dust Cap
This cable reel is made of sheet steel, has a core diameter of 320 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Panel female audio 24 pole / video 6XRG59
Cable Drum GT380
Black open plastic cable reel with a core diameter of 170 mm. Special portable and stackable version for professional rental business. Empty weight of 4.4 kg.
Panel male audio 24 pole / video 6xRG59
Standard Circular Connector POSITIONER MINICON MPC MALE CRIMP W/ HX
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
XP Opt. Chassis Con M
ANTENNA CABLE RG142BU SMA 4.5M
ANTENNA CABLE S04162B SMA 15M
This cable reel is made of sheet steel, has a core diameter of 178 mm and no cover. It is suitable for daily outdoor applications and is equipped with exchangeable, shock-resistant steel panels. An ergonomic fixing brake is integrated in the frame.
Flap with auxiliary coil ZU GT 450, SK 450
Die for Crimp XLR XX-HA. Suitable for tool HX-R-BNC. Standard B-crimp acc. to IEC 60352-2. Wire size AWG 24-22, 0.22 - 0.34 mm2
XP Opt. Chasis CON F
Combiner Line combines left and right channel of stereo signal by means of a passive network. afterwards the circuit is balanced by a NTL transformer (galvanic isolation) and terminated by a male XLR output. Especially used for stereo equipment with asymmetric outputs (RCA) for connections to a symmetric input (XLR female)
Distributes symmetrical mono output signal of a source to 2 RCA outputs+ (asym.) L + R. Via NTL1 (galvanic isolation) and a downstream passive network. Especially suited for transmission lines that should remain symmetric and be rendered asymmetric directly before arriving at the user (recipient).
DI-Adapter Mic 2 / 200 Ohm / 1:1
Ground-Loop-Insulator, Line XLR female/XLR male, 1:1 transmission for 600 Ohm impedance, Line up to 6V, frequency 30Hz-40KHz. Transmission with ground lift 1:1 (NTL1), no ground loops and annoyances anymore.
Adapter Line, asymmetrical transmission XLR fem./RCA fem., 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Adapter Line, symmetrical transmission XLR male / RCA female, 1:1 transmission for 600 Ohm impedance, Line up to 6 V, 30Hz-40KHz frequency response. The transformed signals will be electrically isolated with the internal transformer NTL1.
Phantom Audio Adapter for Micron 8 pin system
Generalmente spedito 4 settimane
Phantom Audio Adapter Hardwired Version
Generalmente spedito 4 settimane
Phantom Audio Adapter for Micron Explorer with 6 Pin
Generalmente spedito 4 settimane
Phantom Audio Adapter for Sennheiser 1 Pin
Generalmente spedito 4 settimane
Phantom Modules for Audio Limited 6 Pin. The VT1126 phantom adapter is a small unit that allows hard-wired use of miniature lavalier microphones. It converts 48V phantom to electret power and puts out the audio as an electronically balanced signal on an XLR 3-pin male connector.
Generalmente spedito 4 settimane
Ground loop insulator line phono jack to phono jack, 1:1 transmission for signals with 600 ohm impedance, Line up to 6 V, 30Hz-40KHz frequency. Transmission with ground lift 1:1 (NTL1), interferences and ground loops can be avoided.
The DPA DAD6004 is a MicroDot to 6-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio Limited TX 2000 and TX 2020 wireless transmitters.
An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to Audio Technica 3000 Series (Generation 4), 5000 Series ( Generation 3), 6000 Series.
Right-angled MCX plug to right-angled SMA plug (pack of 2)
Generalmente spedito 4 settimane
Flap for GT 450, SK 450
Cover with lockable door for GT380 and SK 380
Connector
Generalmente spedito 4 settimane
Drum plate HT582
The DPA DAD3051 is a MicroDot to 4-pin Hirose adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with the Ramsa WX-RP410 bodypack transmitter.
The DPA DAD6033 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Audio-Technica AEW-T1000 D UniPak.
The DAD6001 is an adapter featuring XLR-male and MicroDot connections. The adapter is designed to attach DPA microphones to external phantom power sources such as preamps, mixers, etc. This version features a belt clip for added convenience while using in mobile situations.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The DPA DAD6008 is a MicroDot to 4-pin Hirose connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony WRT820, WRT860 and WRT8 wireless transmitters.
The rear compatibility of opticalCON MTP 24 chassis fitting with standard MTP 24 (ELITE male with 20 N springforce) breakout cable allows easy adaptation to fiber standard connectors such as LC, SC, ST. The approved dust shutter ensures high mating cycles and minimal maintenance. The housing seal is used for color coding and IP protection.
Flap for GT310, SK310, HT3XX,-4XX,-5XX
Handtool HTX
The DPA DAD6019 is a MicroDot to 1/8" mini connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sony Freedom WRT-805 transmitter.
This DPA Adapter converts a Microdot connection to a TA5-female for adapting DPA Miniature Microphones with wireless transmitters featuring TA5-male inputs. For normal sound pressure level operation only (0 dB attenuation).
The DPA DAD6010 is simply an adapter that features the DPA standard Microdot connection and a Switchcraft TA4-female connection. The adapter is designed for connecting DPA microphones to transmitters and power supplies featuring TA4-male connections.
The DPA DAD6003 is a MicroDot to 3-pin Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sennheiser SK 50, SK 250, SK 3063 and SK 5012 wireless transmitters.
The DPA DAD6030 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Telex / Electro-Voice RE-1 series.
The DPA DAD6032 is a MicroDot to Switchcraft TA4-Female Connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Beyerdynamic Opus and Mipro ACT series.
The DPA DAD6034 is a MicroDot to locking 1/8" (3.5mm) mini connector. The connector enables direct integration between DPA microphones and belt-pack transmitters featuring locking mini connections such as the Sennheiser Evolution series.
The DAD6035 Audio Ltd. Mini TX Adapter from DPA Microphones features a Microdot connector on one side and a Lemo 4-pin connector on the other. It is used with DPA's series of miniature microphones to make them compatible for use with Audio Ltd. Mini TX wireless transmitters.
The DPA DAD6017 is a MicroDot to Switchcraft TA3-female connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the AKG PT 60, 80, 81, 400, 4000, Samson UT1L and VT2L transmitters.
The DPA DAD3056 Adapter simply converts the Microdot connection found on DPA microphones for use with Lectrosonics wireless transmitters with TA5 inputs.
The DPA DAD6002 is a MicroDot to Coaxial Lemo connector for adapting DPA miniature series microphones to compatible belt-pack transmitters such as the Sennheiser BF1083-U/BF1053-U.
The DPA DAD3050 is a MicroDot to mini 1/8" (3.5mm) adapter for the DPA 4063 and 4067 low DC microphones. The adapter allows the 4063 and 4067 microphones to be used with TOA WM360 and WM4310 bodypack transmitters.
This DPA adapter connector simply converts their proprietary M-DOT microphone connection for use with the Zaxcom TRX900 wireless transmitter / IFB receiver. The adapter will also supply phantom power to the connected microphone.
Hand tool HTXP
Fiche male M25 Reduced
Fiche male M25 Oversize
Round panel flange for D-Series
Hand tool to hold the barrel of the PX series while the boot is tightened. With the HTXP the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.
Cover plate for cable reel KTGT310.OF with 8x cut-outs for D-series chassis connectors and one cut-out for multipin connectors with 13 to 19 pins.
Cover plate 8xD-cutout / GT450
Female XLR cable end 110 Ohm input - female BNC 75 Ohm output. Interface balanced and coaxial lines.
Female BNC 75 Ohm input - male XLR cable end 110 Ohm output. Interface balanced and coaxial lines.
PanelF 13Pin No Con Standard
Inline M 19pin No Con Pg16
Female BNC 75 Ohm input - male XLR chassis connector 110 Ohm output. Interface balanced and coaxial lines.
Female XLR chassis connector 110 Ohm input - female BNC 75 Ohm output. Interface balanced and coaxial lines.
XLR female / XLR male - Phase reverse with switch. Pin 2+3 corss-bonded
Drum plate GT*
Inline M 25pin No Con ?6-13 Mm
Inline M 25pin No Con ?13-18 Mm
Panel F 25pin No Con Standard
Black, 5 mm wide Velcro strap, available on reels of 100 m. The fastener is delivered in a PE bag and can simply be cut with scissors to the desired length. Ideal for neat cable management and for various packaging options.
XLR female / XLR male - Groundlift with switch. Pin 1 not interconnected
Hand tool for tightening the bushing of the XLR XX-14 series, jumboPLUG and etherCON CAT6A series.
2 pole 1/4 inch professional phone plug, right-angle, gold plated contacts, black plated. The ultimatePLUG combines the functions of the silentPLUG and timbrePLUG in one product.