For professionals and enthusiasts alike.
Press Rack including DA-410, DA-240, MC-240 & flight-case
The HR-DDA4 is the ideal choice in installations requiring high quality distribution of a digital audio signal. The input and each of the four outputs support AES/EBU, S/PDIF or AES-3ID formats. The HR-DDA4 automatically detects a valid input on any of the four input jacks: S/PDIF optical, S/PDIF coaxial, AES-3ID or AES/EBU.
3G/HD/SD-SDI 2 Input, 8 Output Video Distribution Amplifier
Distribution amplifier 2 x 2 IN 2 x 5 OUT
Quad 3 Way Passive Microphone Splitter
3G/HD/SD-SDI 1 Input, 8 Output Distribution Amplifier
Digital Audio Distribution Amplifier With Multiple Outputs (1U)
Digital 6 Way Stereo Headphone Distribution Amplifier
4 Input, 4 x 5 Output Distribution Amplifier/Mixer (1U)
6 Way Stereo AES/EBU Digital Distribution Amplifier with Dual Power Supplies
6 Way Word Clock Distribution Amplifier with Dual Power Supplies
Quad 3 Way AES/EBU Passive Splitter, XLR Connectors
Quad 3 Way Passive AES3ID Splitter BNC Connectors
The RU-ADA8D is an eight channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to sixteen distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks.
24 Way Mono Distribution Amp With Input Gain Control
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U)
6 Way Stereo Headphone Distribution Amplifier (1U)
6 Way Stereo Distribution Amplifier With Output Gain Control (1U)
6 Way Stereo Distribution Amplifier With RJ45 Connectors & Output Gain Control (1U)
6 Way Stereo AES/EBU Digital Distribution Amplifier (24 bit, 96kHz Capable)
6 Way Stereo AES3ID Digital Distribution Amplifier (24 bit, 96kHz Capable)
6 Way Stereo S/PDIF Digital Distribution Amplifier (24 bit, 96kHz Capable)
6 Way Word Clock Distribution Amplifier
Analogue Balanced Audio Distribution Amplifier
Analogue Balanced Audio Distribution Amplifier
6 Way Stereo Distribution Amplifier With RJ45 Connectors (1U)
6 Way Stereo Distribution Amplifier (1U)
Word Clock Distribution Amplifier. Dual 1>4 / Single 1>8 - BNC. A 20% restocking fee applies to all product returns.
The FP-AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a single 75 Ohm input phono jack for the video signal and two phono jacks for the left and right audio inputs.
The DPA MMP-B Preamplifier is a preamplifier and output stage for DPA Reference Standard MMC series capsules.
The RU-ADA4D is a four-channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks.
Stereo Headphone Amplifier (1U)
Dual Stereo Headphone Amplifier (1U)
The AVN-HD1 has the feature set of the AVN-HA1 however it is for digital I/O and therefore only compatible with the AVN-PD8 models.
The DPA MMP-A Preamplifier is a transformerless preamplifier and output stage for DPA Reference Standard MMC series capsules.
The TX-PA40D 40 Watt Stereo Amplifier is a compact, yet powerful solution for driving 4 or 8 ohm speakers. The TX-PA40D is well suited for applications where fixed amplification is needed, and variable gain is provided from the source. Includes: Amplifier, Power Supply (without Power Cord).
The AV-DC4 is a mono transformer-coupled audio divider/ combiner module for use with balanced, low or high impedance audio inputs and outputs. Input and output connections are provided on XLR jacks with gold-plated contacts. The AV-DC4 features four identical channels. Each channel may be used as either an input or as an output. Two XLR jacks are provided...
Modular active cable, MicroDot, rear, 1.8m
Modular active cable, MicroDot, side, 1.8m
The d:dicate MMP-ER Modular Active Rear Cable by DPA Microphones is a microphone preamp. It is used with any d:dicate modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics.
The d:dicate MMP-ES Modular Active Side Cable by DPA Microphones is a microphone preamp. It is used with any d:dicate modular capsule for capturing audio in applications such as with hanging mics or low-profile table or instrument mics.
Single 3 Way Passive Microphone Splitter
The AVN-HA1 headphone amplifier has been designed specifically to connect to the AVN-PA8 and AVN-PM8 models to provide headphone amplification with volume control.
The EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel 1/4" jacks. One input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a dual 1/4" jack (for "loop out" connection) are provided for connecting the input source. Includes worldwide power supply...
The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels. The RU-UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line-level...
The DPA MMP-C Compact Preamplifier is a preamplifier and output stage for DPA Reference Standard MMC series capsules.
The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel MINI jacks. One stereo input signal feeds all the amplifiers. Stereo RCA jacks, a MINI jack and a 1/4" jack are provided for connecting the input source. Includes worldwide power supply (specify plug).
The ST-DA3 distribution amplifier is part of the "Stick-On" series and includes durable adhesives for permanent or detachable mounting. The ST-DA3 allows bridging of any audio line, gain adjustment, and signal distribution to three balanced or unbalanced outputs.
Single 3 Way Passive AES3ID Splitter With BNC Connectors
Single 3 Way AES/EBU Passive Splitter With XLR Connectors
The STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kilohm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A multi-turn trimmer is user adjustable for either gain or loss in order to match the facility standard microphone levels.
The EZ-ADA4 is a stereo audio distribution amplifier with gain adjustment and audio level metering. The input is connected through RCA jacks or a MINI jack. A front-panel knob adjusts for high or low input levels using the left and right channel LED VU meters. Four stereo outputs are provided on RCA jacks.
The ST-SH2 is a miniature wall and surface mount stereo headphone amplifier. The unit is used for installation applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
The TP-HA1A Format-A Stereo Headphone Amplifier is designed to allow someone to listen to music via headphones over an RDL Format-A sender system. The amplifier features two RJ45 ports, either of which can receive both the power and the audio signal to the amplifier. The second RJ45 port can be used to connect additional headphone amplifiers or another...
The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA3. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA3s.
The TX-MX2R is a compact, high-quality unit that offers active, isolated mixing of two unbalanced line-level audio sources and output to one or two unbalanced destinations. The unit may be used to send a stereo signal to two mono outputs or to mix 2 separate mono inputs into a single output.
1 Stereo Codec/Opus Encode/Decode Option for Portals
Transformer for DA-410 (OUT)
BirdDog Dante NDI Bridge
Generalmente spedito 1-2 settimane
Transformer for DA-410 (IN)
Unbalanced Input Transformer. Unbalanced stereo inputs to summed balanced mono output. Mix two unbalanced audio signals to mono balanced. Combine stereo into mono with balanced output. Unbalanced to balanced conversion without gain. Hum cancellation on unbalanced line inputs. Frequency response 30 Hz to 20 kHz (+/- 1 dB).
Headphone Amplifier/Distributor for 4 Headphones
Remote control as replacement device for the seamless switcher CA-HT-SC-BigOne-TX.
Two black, powder-coated 19 inches mounting brackets for the Seamless Switcher CA-HT-SC-BigOne-TX with 1 RU. The brackets come with 8x mounting screws.