For professionals and enthusiasts alike.
1014059
Nuovo
Invia ad un amico
Destinatario :
* Campi richiesti
o Annulla
Invia ad un amico
Destinatario :
* Campi richiesti
o Annulla
|
Specifications |
|
Features |
|
|
weight |
9.8 kg |
|
dimensions (W × H × D) |
2 U / 19", 485 × 89 × 425 mm |
|
Electronic features |
|
|
amplifier technology |
Class D |
|
amplifier outputs |
2 |
|
DSP routing (matrix) |
4 × 2 |
|
frequency response |
20 Hz – 20 kHz |
|
signal/noise ratio |
>100 dB/A |
|
THD+N |
0.15 % (1 kHz, 8 ohms, 3 dB below clipping) |
|
dynamic range |
>120 dB |
|
password protection |
yes |
|
auto power save |
adjustable from 1 s to 12 h, or never active |
|
protective circuit |
over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit |
|
power supply |
100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC) |
|
power consumption |
Maximum (RMS) 1800 W, idle state 80 W, auto power save 10 W, standby 5 W, power on/off switch / remote power off 2 W |
|
heat dissipation |
Maximal 300 W, 1020 BTU/h, 258 kcal/h (Pink Noise, 6 dB crest, 1/4 Pmax) |
|
temperature range |
0 – 40 °C |
|
cooling |
temperature-controlled fan |
|
output power |
2 × 4000 W / 4 ohms / 100 V / 70 V, 2 × 2000 W / 8 ohms (1 kHz, THD+N <1 %) |
|
minimum impedance |
4 ohms |
|
input channels |
4 |
|
Controller |
|
|
digital signal processors |
2 |
|
independent limiters |
12 |
|
FIR filter |
yes |
|
input gain |
-80 dB – +12 dB |
|
routing gain |
-80 dB – +12 dB |
|
output gain |
-80 dB – +12 dB |
|
EQ |
6 × 10 fully parametric filters, Gain +/-12 dB, Frequency 10 Hz – 20 kHz, Q 0.1 – 100 |
|
selective 3-band limiting |
bass / mid / high |
|
limiter / compressor |
6 |
|
noise gate |
6 |
|
delay |
2 × 0 – 350 ms (0 – 120 m) outputs, 4 × 0 – 88 ms (0 – 30 m) inputs |
|
X-over |
6 × Linkwitz-Riley 4th order (24 dB/octave), high pass 10 Hz – 20 kHz, low pass 10 Hz – 20 kHz |
|
user presets |
100 |
|
speaker presets |
100 |
|
system latency |
1.2 ms |
|
band-specific time constants |
yes |
|
filter technology |
80-bit double precision |
|
input |
AES/EBU 32 kHz – 96 kHz, 16/24 bit |
|
Input DSP processing |
yes |
|
Remote control and remote monitoring |
||
remote control |
Fohhn-Net over RS-485, Fohhn Audio Soft, USB-C |
|
remote monitoring |
temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft |
|
fault message contact |
1 × Relais, 2 × UM, 3-pin Phoenix |
|
switching contact |
load preset, standby on/off |
|
Display (front) |
|
|
receive / send LED |
remote control, Fohhn-Net |
|
ready LED |
blue = Power on, blue flashing = Sign |
|
protect LED |
red = Error / Protect / Standby |
|
input LED |
4 × input signal LED, white = signal (> -50 dBFS), red = clip (> -3 dBFS) |
|
output LED |
2 × output signal LED, white = signal (> -50 dBFS) |
|
USB Config LED |
configuration via USB |
|
Connections and controls |
||
controls |
Power on/off Switch |
|
USB Config |
1 × USB-C socket |
|
remote power in / out |
2 × Phoenix 2-pin |
|
power supply for extern small devices 24 V / 5 W |
1 × Phoenix 2-pin |
|
24 V / 5 W power LED |
green = on |
|
mains connection |
1 × PowerCON |
|
fault contact (open/close) |
1 × Phoenix 3-pin |
|
switching contact 1 and 2 |
1 × Phoenix 3-pin |